|
ROMs y desarrollo Samsung Galaxy S II ROMs y desarrollo Samsung Galaxy S II |
|
Herramientas |
#1
|
||||
|
||||
[19 Oct] ♣♣♣ Shun Andromeda 2.2.0 ♣♣♣ Ahora vas y lo cascas...
Shun Andromeda Kernel (by NEBeek) Después de Ikki The Fenix, la aventura continúa en el ICS, gracias a XDA y los "Elite Recognized Developer": Entropy512, Gokhanmoral y otros (myfluxi, simone201, ...) * AOSP/SAMMY ICS/JB * Toolchain 2012.03 (gcc 4.6.3) with -Ofast compiler option as with Ikki. * Gobernador conservative tweaked. * 100-1600 Mhz (200-1200 Mhz por defecto) * Configurable mediante ExTweaks (recomendado ExTweaks Plus) Versión 2.2.0 1/ Merge with update7 2/ Added SuperSU 0.96 Descarga : AQUÍ No hacer wipe data con esta versión. El dev no sabe si es compatible. Edito: parece que puede provocar brick esta versión al hacer wipe data, por lo que procedo a eliminar el link de descarga
__________________
Última edición por YossYGalaxy Día 02/11/12 a las 21:49:49. |
Los siguientes 3 usuarios han agradecido a YossYGalaxy su comentario: | ||
|
#2
|
||||
|
||||
Changelogs:
Version 2.1.2 1/ Linux 3.0.46 Versión 2.1.0 1/ Linux 3.0.44 Versión 2.0.9f 1/ Linaro 2012.09 2/ Added camera fix done by @Tungstwenty Versión 2.0.9e 1/ Disabled JRCU, back to RCU Versión 2.0.9d 1/ Phenomal tweaks for memory and LCD voltages (thanks @@fenomeno83) 2/ Another review of chargecurrent settings (PLEASE DO A WIPE CACHE, first boot will be longer anyway) Versión 2.0.9c 1/ JRCU (thanks @simone) 2/ New chargecurrent settings (again with 4th settings) Versión 2.0.9b 1/ Linux 3.0.43 2/ New chargecurrent settings Versión 2.0.9 1/ Another new boot logo 2/ Added bus voltage into sysfs 3/ Merge with Siyah's initramfs (CM10 video issue ++) 4/ Added /sdcard/.nobootlogo Versión 2.0.8c 1/ Linux 3.0.41 and 3.0.42 2/ Readded Ondemand governor Versión 2.0.8b 1/ Linux 3.0.40 Versión 2.0.8 1/ Linaro 2012.08 2/ Linux 3.0.39 3/ Back to Revert max8997: Allow 700 mV on buck3 (too long to exit deep sleep) Versión 2.0.7e 1/ Samsung update 5/6/7 sources 2/ Linux 3.0.37 and 3.0.38 3/ bluetooth: support for 4.0.4 stock ROMs 4/ net: wireless: bcmdhd: update bcmdhd driver to 1.15.15 5/ CM10 compatibility (thanks @gokhanmoral) EDIT : For 4.0.4 ROM users, there is an excellent camera fix done by @Tungstwenty you can install through CWM : HERE Versión 2.0.7a 1/ Linaro toolchain 2012.07 (gcc 4.7.2) Versión 2.0.6 1/ wakelock: main_wake_lock fix by tungstwenty 2/ Added -mfpu=neon to Makefile (thanks @voku) 3/ From NEAK 2.1 : cpufreq: another change to stop Level not found issue (might help slow mo) 4/ drivers: conservative and abyssplug, sampling rate modification Versión 2.0.5d 1/ Merge with Siyah 3.3.3c 2/ mach-exynos: mach-u1: Allow 700mV on buck3 (@thanks dorimanx) 3/ bcmdhd: Change packet filter settings to block multicast 4/ Revert: block: sio tweaks 5/ mali: allow 700 mV as minimum for GPU Versión 2.0.4 1/ New bootlogo ("Déchainez votre mobile" thanks @mr.mout) 2/ max8997: Allow 700 mV on buck3 3/ Revert : max8997: Allow 25 mV steps on buck3 4/ From myfluxi kernel : mach-exynos: busfreq: Add undervolt option using asv table && Add options for up- and down threshold 5/ Added SU and SuperSU 0.93 6/ Revert UV -50 mv into default profile 7/ Lower voltages for 200 MHz Versión 2.0.3 1/ Revert : max8997: Allow 700 mV on buck3 2/ Legacy hotplug is back 3/ Some debug flags unset 4/ NOOP is default profile scheduler 5/ Undervolting -50 mV within default profile Versión 2.0.2 1/ Voodoo louder compatibility is back (sorry) 2/ Some makefile merge from myfluxi kernel (thanks @myfluxi) 3/ From myfluxi kernel : max8997: Allow 700 mV on buck3 max8997: Allow 25 mV steps on buck3 Versión 2.0.1 1/ Revert to gcc 4.6.3 (Linaro 2012.03) 2/ Revert to conservative Versión 2.0 1/ Linux 3.0.36 2/ Linaro 2012.06 (GCC 4.7.1) 3/ Merge with Siyah 3.3.2 (extweaks profiles should be reseted during installation but you can use my script to save them before) Versión 1.8 1/ Linux 3.0.35 2/ SuperSU 0.91 3/ Some reverts from Ikki merge 4/ arm: remove "optimized" SHA1 routines 5/ Added Abyssplug with some tweaks from my GS3 testings (credits @Angelom) 6/ net: wireless: bcmdhd: update wifi drivers (from i9300 sources) Versión 1.7 1/ Linux 3.0.34 2/ Linaro 2012.05 (gcc 4.7.1) 3/ block: sio tweaks 4/ mmc: n7000 changes without enabling MMC_CAP_ERASE 5/ Few others fixes Versión 1.6 1/ Linux 3.0.33 2/ mdnie: toggling mdnie negative effect with home button 3/ Revert bad cherry pick (kernel/sched.c : ONLINE) 4/ mc1n2: Add GT-N7000 call audio support Versión 1.5 1/ Added a way to change logo into CWM 2/ Merge cpu settings from Ikki (hotplug, deepsleep level, L4=800 MHz freq max enabled, ...) Versión 1.4 1/ Staging: android: binder: Fix crashes when sharing a binder file between processes 2/ From Siyah : sched: fix cpu index check in get_cpu_nr_running function 3/ mc1n2: Add interface for volume registers (thanks @myfluxi) 4/ From Siyah : touchscreen: mxt224_u1: use platform data struct directly to set touchscreen threshold values 5/ ld9040: increase boot gamma level to original GAMMA_160CD level 6/ max8997: Implement Accessory Charger Adapter support. Versión 1.3 1/ modem_if: update modem driver to update5 sources 2/ mach-exynos: tmu: add tmu sysfs for temperature reading (from update5 sources 3/ net: wireless: bcmdhd: disable ESCAN_RESULT_PATCH (from Siyah) 4/ usb: gadget: composite: Fix corruption when changing configuration 5/ [MMC] Patch the firmware of certain Samsung emmc parts to fix a bug 6/ Revert "usb: otg: merges with sztupy's usb host mode build 5 changes in his nexus s kernel" Versión 1.2 1/From Siyah : cypress: touchkey refactorings, cleanup and guards against voltage&led status modifications when in deep sleep which cause slowness bug 2/ mDNIe: adjustable color settings (thanks to sakura) 3/ New boot logo Versión 1.1 1/ Linux 3.0.32 2/ net: wireless: bcmdhd: another major update to broadcom drivers, from SHV-E110S sources. 3/ Revert "RWSEM_XCHGADD_ALGORITHM for ARM (R/W semaphores implemented using ARM atomic functions) by CodeAurora" 4/ GPU voltage +50 mV with default profile (use script to reset profile) Versión 1.0 1/ bcmdhd : patches from Siyah 3.2.3 2/ mmc: increase mmc read and write timeout for some crappy cards. 3/ ld9040: adjust panel gamma order to have more smooth transitions in lower brightness levels & panel gamma set changes to have lower brightness for low-light conditions 4/ from Siyah : cypress: led fadein/fadeout (inspired from myfluxi's repo). & cypress: restore led regulator voltage after fading out 5/ mozilla boot-to-gecko (b2g) support. (thanks to pulser) 6/ cm9 sdcard mounts
__________________
Última edición por YossYGalaxy Día 20/10/12 a las 13:29:22. |
#3
|
||||
|
||||
Changelog Version 1.5
1/ Added a way to change logo into CWM 2/ Merge cpu settings from Ikki (hotplug, deepsleep level, L4=800 MHz freq max enabled, ...) Descarga Version 1.5 / CWM only ICS 4.0.X ROM http://bit.ly/LaezHF |
Gracias de parte de: | ||
#4
|
||||
|
||||
Nueva versión de este kernel, por mi experiencia muy estable y ahorrador.
Changelog Version 1.6 1/ Linux 3.0.33 2/ mdnie: toggling mdnie negative effect with home button 3/ Revert bad cherry pick (kernel/sched.c : ONLINE) 4/ mc1n2: Add GT-N7000 call audio support Descarga Version 1.6 / CWM only ICS 4.0.X ROM http://dl.dropbox.com/u/27862713/kernel/shun-1.6.zip
__________________
|
Gracias de parte de: | ||
#5
|
||||
|
||||
Capturas de pantalla batería 1650 mAh
Andromeda v1.6 + SIO + Ondemand (con mis modificaciones) - [200 - 1200] MHz + U.V. - 2G y Wi-Fi. Puntualmente 3G. - Brillo del 30% al mínimo. - Uso puntual del Bluetooth.
__________________
Última edición por YossYGalaxy Día 23/06/12 a las 17:12:36. |
#6
|
||||
|
||||
Version 1.8
CHANGELOG 1/ Linux 3.0.35 2/ SuperSU 0.91 3/ Some reverts from Ikki merge 4/ arm: remove "optimized" SHA1 routines 5/ Added Abyssplug with some tweaks from my GS3 testings (credits @Angelom) 6/ net: wireless: bcmdhd: update wifi drivers (from i9300 sources) Descarga Version 1.8 / CWM only ICS 4.0.X ROM http://bit.ly/LGdebP |
Los siguientes 3 usuarios han agradecido a YossYGalaxy su comentario: | ||
#7
|
||||
|
||||
Vamos a probarlo vengo de siyah.
__________________
|
#8
|
||||
|
||||
__________________
|
#9
|
||||
|
||||
Más capturitas, que sé que gustan a la gente:
Andromeda v.1.8
__________________
Última edición por YossYGalaxy Día 29/06/12 a las 19:59:42. |
#10
|
||||
|
||||
Version 2.01
CHANGELOG 1/ Revert to gcc 4.6.3 (Linaro 2012.03) 2/ Revert to conservative Descarga Version 2.01 http://bit.ly/KSGCjd Última edición por YossYGalaxy Día 02/07/12 a las 15:59:55. |
#11
|
||||
|
||||
Y cual es el que te va mejor?? Que gobernador sustituye al ondemand??
Gracias |
#12
|
||||
|
||||
Normalmente llevo el OnDemand o el Lulzactive, por lo que en esta útima versión voy a poner el Lulzactive.
Si te decides por el gobernador Lulzactive te aconsejo la aplicación de Tegrak para configurarlo a tu gusto: https://market.android.com/details?i...rak.lulzactive |
#13
|
||||
|
||||
la ultima versionno trae el ondemand lo estoy probando , con el q trae shus no se que, un gobernador propio d este hombre, voy aprobar q tal va d bateria aunque ya he visto tus capturas q creo q seran con el conservative, una caña .
lo maximo q he ocnseguido de benchmark ha sido con el siyah 3.1b1 y el stock rom lpg 6569 antutu benchmark no he conseguido q nada lo iguale gracias te ire comentando |
Gracias de parte de: | ||
#14
|
||||
|
||||
la ultima versionno trae el ondemand lo estoy probando , con el q trae shus no se que, un gobernador propio d este hombre, voy aprobar q tal va d bateria aunque ya he visto tus capturas q creo q seran con el conservative, una caña .
lo maximo q he ocnseguido de benchmark ha sido con el siyah 3.1b1 y el stock rom lpg 6569 antutu benchmark no he conseguido q nada lo iguale gracias te ire comentando Respecto a las capturas son con un OnDemand (eso sí convenientemente tweakeado para que sea ahorrador sacrificando rendimiento). Gracias por compartir tu experiencias hamijo. |
#15
|
||||
|
||||
lo he tenido q quitar 3 lags y cuelgue
asi q lo he quitado a ver si lo arregla, pero me ha gustado |
#16
|
||||
|
||||
__________________
|
#17
|
||||
|
||||
Version 2.02
CHANGELOG 1/ Voodoo louder is back (sorry) 2/ Some makefile merge from myfluxi kernel (thanks @myfluxi) 3/ From myfluxi kernel : max8997: Allow 700 mV on buck3 max8997: Allow 25 mV steps on buck3 Descarga Version 2.02 http://bit.ly/N7ZKZr
__________________
Última edición por YossYGalaxy Día 05/07/12 a las 15:24:51. |
#18
|
||||
|
||||
Dupe
__________________
Última edición por YossYGalaxy Día 05/07/12 a las 22:20:51. |
#19
|
||||
|
||||
Esta última versión 2.02 ha recibido muy buenas críticas del usuario It_ler que se dedica a testear kernel:
Cita:
"This kernel is very stable, smooth and has good battery life in night use on my phone.
I like the recovery, support of Voltage Control (VC) and ExTweaks app. Now I want to see its battery life in mixed usage. EDIT: No "slow-motion-bug", no FCs, everything is working so far. EDIT2: Good battery life in mixed usage too. Could surely be optimized by some tweaking, as the kernel is highly configurable."
__________________
|
|
#20
|
||||
|
||||
Acabo de instalarlo le he pasado el limpiador de kernel, pero no me cogia cobertura y me ha ido bastante mal, seguro que vale para Sammy? Llevo lpw
Enviado desde mi GT-I9100 usando Tapatalk 2
__________________
INVITACION DROPBOX:
http://www.dropbox.com/referrals/NTgwODM3NTE5 INVITACION PCLOUD https://my.pcloud.com/#page=register&invite=ocOkZQg1P6V |
Estás aquí | ||||||
|