[ SOLUCIONADO ] Inicio error

**tansy** · 10/05/13, 21:08:35

Buenas noches,el problema que tengo es que se me me queda en la pantalla de inicio y no arranka,intento meter una ruu pero me da error de imagen,anteriormente le hice el recovery y el root antes de que se me quedase en el inicio,el telefono lo adquiri por orange,alguien sabe que ruu he de meter o que debo hacer.GRACIASS

fixit · 10/05/13, 22:12:11

Cita:

Originalmente Escrito por ang3lical72

Buenas noches,el problema que tengo es que se me me queda en la pantalla de inicio y no arranka,intento meter una ruu pero me da error de imagen,anteriormente le hice el recovery y el root antes de que se me quedase en el inicio,el telefono lo adquiri por orange,alguien sabe que ruu he de meter o que debo hacer.GRACIASS

NO PUEDES meter el ruu,ni te pregunto que ruu,no hay ruu para tu cid..
1. pulsa el power 30 segundos , hasta que apaga y intenta poner en bootloader, a ver si funciona y despues recovery

**tansy** · 10/05/13, 23:56:03

al recovery me entra,pero no puedo meter una rom para flasearla,ya que no hay nada dentro,respecto a lo del bootloader te refieres al fasboot,hboot etc..??,por que eso si que me entra todo el menu

fixit · 11/05/13, 00:13:56

vale ,busca rom stock 1.28.401.7 de oxeded (si no intenta con 1.29 de oxeded -http://android-revolution-hd.blogspot.com.es/p/android-revolution-hd-mirror-site-var.html )
Descarga android SDK http://developer.android.com/sdk/index.html
En la carpeta de androidsdk / tools vas a poner el rom antes descargado y lo renombras el ROM DE One_1.28xxxxx en ROM
abre el cmd y pones ,,cd c:\AndroidSDK\tools,,
despues ,,adb push ROM.zip /sdcard/ROM.zip,,
Si todo esta corecto tardara unos minutos y aparecera ,, 12345678kb to 1234567kb,,
Entra en el telefono en recovery y haces : Factory Reset", "Wipe Cache Partition" y "Wipe Dalvik Cache
despues "Install ZIP from SD Card" y "Choose file from SD Card"

**tansy** · 11/05/13, 00:43:34

ok voy a ello y te comento ,gracias.

JacksSsS · 11/05/13, 00:48:16

Por cierto, ahora que comentáis esto fixit ...

Es posible usar el USB en modo recovery para conectarlo al PC? Me ha venido esta pregunta a la cabeza porque a veces flasheo el boot.img y se me olvida meter la ROM .zip y claro tengo que volver a encerder el teléfono en modo normal... No se si sería posible entrar en usb mode o mount usb... ¿Te suena algo así?

Y por otra parte, tampoco se pueden meter las Roms en /sdcard ya que el recovery no me es capaz de montar esta carpeta...

Gracias compi

**tansy** · 11/05/13, 00:58:48

asi es como dices???oh tengo que retocar algo?

JacksSsS · 11/05/13, 01:05:12

tienes que renombrar a ROM.zip

**tansy** · 11/05/13, 01:07:57

Cita:

Originalmente Escrito por JacksSsS

tienes que renombrar a ROM.zip

Este error me da,no entiendo que hago mal,diosssss

**tansy** · 11/05/13, 01:09:27

De verdad que agradezco vuestra ayuda,recibi el movil hoy y no doy credito a lo que me pasa,evidentemente algo hice mal,
desbloquee el bootloader hice el recovery,y no se que ha podido salir mal,vengo de xpria s y del galaxy S2 y no tuve problemas

JacksSsS · 11/05/13, 01:10:59

Has abierto el CMD como administrador????

**tansy** · 11/05/13, 01:15:11

Perdona mi ignorancia,pero como se abre??

Creo que lo ideal seria meter la ruu que venia de seria de orange empezaba por 1.28,no me acuerdo de mas,ni donde bajarla,eh estado googleando pero no la he visto

Pd:Por cierto aunque soy de zaragoza,llevo 6 años viviendo en sevilla

JacksSsS · 11/05/13, 01:16:53

a ver...

en el buscador de windows vamos en el botón inicio tienes para escribir, tipeas CMD, cuando te salga el iconito de CMD das a botón derecho "abrir como administrador"

**tansy** · 11/05/13, 01:20:55

Por si sirve de algo,puedo entrar en recovery y en el fasboot

**tansy** · 11/05/13, 01:21:46

estoy con xp y entro en cmd,la historia esta en que no puedo meter la rom a la sd interna para poder flasearla,y la ruu RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3 me da error de imagen

JacksSsS · 11/05/13, 01:26:19

Te lo pondré más fácil que fixit se explica como un libro cerrado:

Hello all,

I've seen multiple people who recently, by one way or another, have a phone that have the bootloader unlocked, device rooted, and a recovery flashed...but for some reason you don't have a ROM flashed and your phone won't boot up past the bootanimation. If you're in that situation, this will hopefully help solve that issue.

What this thread is designed to do is inform you how to flash a ROM.zip file onto your seemingly bricked HTC One S device that you can't boot up. As you know, usually if your phone boots up, you just plug it into your computer, mount it, and just drag and drop the file. Well, for those of you that have no way to do that, I hopefully have a fix for you!

Requirements:
Unlocked Bootloader/Rooted Device
CWM Recovery flashed from fastboot.
Basic knowledge of adb/fastboot commands

Steps:
- Download your ROM of choice (referred to as ROM.zip) and place it wherever your ADB is on computer's harddrive (referred to as c:\AndroidSDK\tools)

- Boot your phone into Recovery and select the "Mounts & Storage" screen

- Plug your phone into your computer using USB Data Transfer Cable

- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)

- Open Command Prompt on your computer by doing Start -> Run -> cmd

- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.

- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)

- Once this has completed, unplug your phone from your computer and close the Command Prompt window

- Back in Recovery, go to Recovery's main screen and Do a "Factory Reset", "Wipe Cache Partition", and "Wipe Dalvik Cache [which is in the Advanced menu of Recovery]"

- When these are all done, from Recovery's main screen, select "Install ZIP from SD Card" and then "Choose file from SD Card" and select the ROM.zip file you just pushed from your computer to the SD Card. If you do not see the file, go back to Mounts and Storage and toggle them to say "Mount /sdcard/" and "Mount /system/" and then go back and try to fine the ROM.zip file. If you still do not see it, it was not pushed correctly...go back and ensure you were letter for letter with the name and the file path.

- Once the screen in Recovery says "Install from SD Card Complete.", go back to Recovery's main screen yet again and select "Reboot system now" - If your device fails to Install the ROM.zip, I had this happen to me. You must push the CWM SuperSU ZIP (the .zip file is found at the end of this thread)file as outlined before and Install THAT .zip file in Recovery, then reboot Recovery and Install the ROM.zip from SD Card.

- Let your phone have some time to boot up...initial boot from installing a new ROM have histories of taking a couple minutes.

- You should now be on a working HTC One S running whatever ROM you decided to flash.

Conclusion:
I hope you got your phone working again and I hope this helped. Please feel free to critique this guide as I am quite new to the HTC One S, but not new to rooting phones at all. If you have questions, please comment and ask or don't hesitate to shoot me a PM...I'm more than willing to help.

I hope this helped all of you who may be in the situation I was in and the situation I've seen a couple of people in.

Thanks for this information goes out to doktortaru, strker45, and torxx.

**tansy** · 11/05/13, 01:28:24

Cita:

Originalmente Escrito por JacksSsS

Te lo pondré más fácil que fixit se explica como un libro cerrado:

Hello all,

I've seen multiple people who recently, by one way or another, have a phone that have the bootloader unlocked, device rooted, and a recovery flashed...but for some reason you don't have a ROM flashed and your phone won't boot up past the bootanimation. If you're in that situation, this will hopefully help solve that issue.

What this thread is designed to do is inform you how to flash a ROM.zip file onto your seemingly bricked HTC One S device that you can't boot up. As you know, usually if your phone boots up, you just plug it into your computer, mount it, and just drag and drop the file. Well, for those of you that have no way to do that, I hopefully have a fix for you!

Requirements:
Unlocked Bootloader/Rooted Device
CWM Recovery flashed from fastboot.
Basic knowledge of adb/fastboot commands

Steps:
- Download your ROM of choice (referred to as ROM.zip) and place it wherever your ADB is on computer's harddrive (referred to as c:\AndroidSDK\tools)

- Boot your phone into Recovery and select the "Mounts & Storage" screen

- Plug your phone into your computer using USB Data Transfer Cable

- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)

- Open Command Prompt on your computer by doing Start -> Run -> cmd

- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.

- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)

- Once this has completed, unplug your phone from your computer and close the Command Prompt window

- Back in Recovery, go to Recovery's main screen and Do a "Factory Reset", "Wipe Cache Partition", and "Wipe Dalvik Cache [which is in the Advanced menu of Recovery]"

- When these are all done, from Recovery's main screen, select "Install ZIP from SD Card" and then "Choose file from SD Card" and select the ROM.zip file you just pushed from your computer to the SD Card. If you do not see the file, go back to Mounts and Storage and toggle them to say "Mount /sdcard/" and "Mount /system/" and then go back and try to fine the ROM.zip file. If you still do not see it, it was not pushed correctly...go back and ensure you were letter for letter with the name and the file path.

- Once the screen in Recovery says "Install from SD Card Complete.", go back to Recovery's main screen yet again and select "Reboot system now" - If your device fails to Install the ROM.zip, I had this happen to me. You must push the CWM SuperSU ZIP (the .zip file is found at the end of this thread)file as outlined before and Install THAT .zip file in Recovery, then reboot Recovery and Install the ROM.zip from SD Card.

- Let your phone have some time to boot up...initial boot from installing a new ROM have histories of taking a couple minutes.

- You should now be on a working HTC One S running whatever ROM you decided to flash.

Conclusion:
I hope you got your phone working again and I hope this helped. Please feel free to critique this guide as I am quite new to the HTC One S, but not new to rooting phones at all. If you have questions, please comment and ask or don't hesitate to shoot me a PM...I'm more than willing to help.

I hope this helped all of you who may be in the situation I was in and the situation I've seen a couple of people in.

Thanks for this information goes out to doktortaru, strker45, and torxx.

pera que traduzco que mi ingles es pesimo

JacksSsS · 11/05/13, 01:29:00

A mí es que me da pereza directamente...

JacksSsS · 11/05/13, 01:29:49

El primer problema que veo en el SDK que te has bajado es que no tienes el ejecutable adb como puedes ver que sí está en la captura de pantalla de la carpeta tool...

**tansy** · 11/05/13, 01:32:57

Ok me voy a poner a ello,haber si doy con la tecla,que estoy que me subo por las paredes

y como o de donde me bajo el ejecutable adb??oh dicho de otra manera,que es lo que debo corregir o instalar correctamente

Gracias de parte de:
tansy

Gracias de parte de:
tansy