|
ROMs y desarrollo Xperia Arc / Arc S ROMs y desarrollo Xperia Arc / Arc S |
|
Herramientas |
#1
|
||||
|
||||
¡Los Sony Ericsson de 2011 ya se pueden actualizar a Android 6.0 Marshmallow!
Enviado desde mi LG-D855 mediante Tapatalk Última edición por palluy Día 01/03/16 a las 08:26:45. |
Gracias de parte de: | ||
|
#2
|
||||
|
||||
Pero hace falta el boot loader desbloqueado?.
|
#3
|
||||
|
||||
Dejo el enlace de xda que explica bien como flashearla.
Leer bien antes de hacer nada, ni yo ni htcmania se hace responsble. http://forum.xda-developers.com/xper...-13-0-t3323975 Última edición por palluy Día 01/03/16 a las 11:34:41. |
#4
|
||||
|
||||
Alguien que se haya puesto manos a la obra y lo tenga actualizado a 6.0 podria poner los pasos seguidos?
saludos |
#5
|
||||
|
||||
Lo he intentado pero no consigo poner el móvil en modo fastboot e instalado driver y todo pero nada no me deja y no puedo instalar esta rom
|
#6
|
||||
|
||||
En fin, que fue instalar una maquina virtual con Windows 7 32 bits y mano de santo. Drivers del fastboot funcionando a la primera. -> http://forum.xda-developers.com/show...8#post48915118 Para entrar en fastboot hay que quitar 5 segundos la batería, ponerla y conectar el cable usb mientras se mantiene presionada la tecla menú. Para comprobar que funciona correctamente escribir fastboot devices y ver que nos devuelve un número (esto es que ha reconocido el terminal) Los pasos basicamente es tener una tarjeta SD rápida (recomendada clase 10 o superior) si no lagea bastante. Esta tarjeta ha de tener una única partición primaria. Yo particularmente borre la partición que tenía y la dejé sin formato, dado que luego desde el recovery ya lo formatea correctamente. Luego de estos pasos previos seguir el tutoríal al pie de la letra: ->https://github.com/LegacyXperia/Wiki...ng-Marshmallow Código:
Flash LX13 kernel follow the usual procedure: make sure you extracted boot.img from the ROM.zip connect phone in fastboot mode fastboot flash boot boot.img fastboot reboot enter Recovery Wipe SD card All data on the SD card will be deleted. Wiping is needed only the first time you install LX13, or when you have problems. Boot to Recovery factory reset > full factory reset Wipe cache advanced > wipe system partition NOTE: this will format the card to F2FS if necessary, and create /data and /data/media on it. /data/media is used to emulate an SD card (Android acts like its content is on a separate SD card, where photos are stored for example). You cannot access /data/media via the plain file system with a card reader. Flash the images using sideload NOTE: You must have the latest ADB version 1.0.32. Check with 'adb version'. With an older version you will get "protocol fault (no status)" reboot again to recovery (Note: the "reboot recovery" option does not work. Do a normal reboot and press the recovery key instead) connect USB to PC Select Apply update > Apply from ADB Sideload LX13 rom (takes 10 minutes). Example: adb sideload cm-13.0-20160224-UNOFFICIAL-LegacyXperia-urushi.zip again, Select Apply update > Apply from ADB Sideload GAPPS (this is optional, but you most likely want it) Sideload anything else you want (keyboard etc.) NOTE: cm13 includes toybox instead of busybox (a tool to execute scripts). As a result, assume that images for older cm versions will not work. NOTE: install GAPPS before you boot for the first time. (Only before the first boot, installers get special privileges). NOTE: if you have installed LX13 before, and you enabled ADB debugging and verified your PC, you can also move the images to the phone using ADB, and flash the images from the Recovery. It's easier to just use sideload. Reboot the first boot will take a while; all apps are compiled. |
#7
|
||||
|
||||
Yo tras dos días intentando al final lo he conseguido. El problema en mi caso radicaba en el sistema operativo (Windows 8.1), que aunque instalase todos los drivers no había manera de que pillase el driver de S1 fastboot, y el adb también me daba un problema por no se que archivos de RSA...
En fin, que fue instalar una maquina virtual con Windows 7 32 bits y mano de santo. Drivers del fastboot funcionando a la primera. -> http://forum.xda-developers.com/show...8#post48915118 Para entrar en fastboot hay que quitar 5 segundos la batería, ponerla y conectar el cable usb mientras se mantiene presionada la tecla menú. Para comprobar que funciona correctamente escribir fastboot devices y ver que nos devuelve un número (esto es que ha reconocido el terminal) Los pasos basicamente es tener una tarjeta SD rápida (recomendada clase 10 o superior) si no lagea bastante. Esta tarjeta ha de tener una única partición primaria. Yo particularmente borre la partición que tenía y la dejé sin formato, dado que luego desde el recovery ya lo formatea correctamente. Luego de estos pasos previos seguir el tutoríal al pie de la letra: ->https://github.com/LegacyXperia/Wiki...ng-Marshmallow Código:
Flash LX13 kernel follow the usual procedure: make sure you extracted boot.img from the ROM.zip connect phone in fastboot mode fastboot flash boot boot.img fastboot reboot enter Recovery Wipe SD card All data on the SD card will be deleted. Wiping is needed only the first time you install LX13, or when you have problems. Boot to Recovery factory reset > full factory reset Wipe cache advanced > wipe system partition NOTE: this will format the card to F2FS if necessary, and create /data and /data/media on it. /data/media is used to emulate an SD card (Android acts like its content is on a separate SD card, where photos are stored for example). You cannot access /data/media via the plain file system with a card reader. Flash the images using sideload NOTE: You must have the latest ADB version 1.0.32. Check with 'adb version'. With an older version you will get "protocol fault (no status)" reboot again to recovery (Note: the "reboot recovery" option does not work. Do a normal reboot and press the recovery key instead) connect USB to PC Select Apply update > Apply from ADB Sideload LX13 rom (takes 10 minutes). Example: adb sideload cm-13.0-20160224-UNOFFICIAL-LegacyXperia-urushi.zip again, Select Apply update > Apply from ADB Sideload GAPPS (this is optional, but you most likely want it) Sideload anything else you want (keyboard etc.) NOTE: cm13 includes toybox instead of busybox (a tool to execute scripts). As a result, assume that images for older cm versions will not work. NOTE: install GAPPS before you boot for the first time. (Only before the first boot, installers get special privileges). NOTE: if you have installed LX13 before, and you enabled ADB debugging and verified your PC, you can also move the images to the phone using ADB, and flash the images from the Recovery. It's easier to just use sideload. Reboot the first boot will take a while; all apps are compiled. |
#8
|
||||
|
||||
Buenas,
Y qué tal resultado da esta ROM. ¿Merece la pena tanto trabajo para instalarla? Salu2. |
#9
|
||||
|
||||
Estas rom va de maravilla, lo único que ocurre es que -al menos en mi caso- no es root y la microsd aparece como memoria interna. Por lo demás muy bien. (y es 6.0, tal y como dicen).
Lo que sí, no me pidas que te diga cómo lo hice porque tuve que ir improvisando (creo que me pude perder por el camino) desde siguiendo las instrucciones como base para hacerlo. |
Estás aquí | ||||||
|