[ CONSULTA ] tab97qc 8G

[jmendes1974]

¡hola Roxu

Lo sentimos aún no han dado la feedback, pero me esperan para llegar a una USB para poder leer la tarjeta Micro SD.
Mi lector de tarjetas da error al intentar formatear la aplicación de alerta.

Gracias.

[roxu]

Originalmente Escrito por jmendes1974

¡hola Roxu

Lo sentimos aún no han dado la feedback, pero me esperan para llegar a una USB para poder leer la tarjeta Micro SD.
Mi lector de tarjetas da error al intentar formatear la aplicación de alerta.

Gracias.

Hola de nuevo, no entiendo lo que quieres decir, la traducción no es muy buena, si es posible escribeme en Inglés.

Gracias.

[jmendes1974]

Hello Roxu.

Sorry for my Spanish what I meant was that I had to buy a new USB stick because with my card reader couldn´t install Phoenixcard, thats why i take so must time to feedback.
Now I already have the tablet working with firmware tab97QC, but i need to use the second method
Today if i have time I'll try to install TRW who sends and then upgrade.

Thanks again for the support you have given me.

Thank you.

[roxu]

Originalmente Escrito por jmendes1974

Hello Roxu.

Sorry for my Spanish what I meant was that I had to buy a new USB stick because with my card reader couldn´t install Phoenixcard, thats why i take so must time to feedback.
Now I already have the tablet working with firmware tab97QC, but i need to use the second method
Today if i have time I'll try to install TRW who sends and then upgrade.

Thanks again for the support you have given me.

Thank you.

Ok, i understand your questions, please don´t install the recovery trwp, this version isn´t tested for your tablet, probably after the instalation your device don´t boot.

When you use a sd adapter to make the microsd with PhoenixCard and don´t work, check the lock switch, this switch enables the write protection on card, the best device for make a micro sd firmware installer is a usb adapter, you can buy this one in all chinese shops and the price is very low, 5 or 6 euro.


Best regards. Juan.

[jmendes1974]

Hi

Yes i order one usb adapter and now it works fine
Well after installing the trwp the tablet boot normally and the recovery menu works fine, but after install the upgrade you sends to mee the tablet don´t boot brick on the first screen.

Today I will try to download the upgrade again and try one more time.

Thank you.

[jmendes1974]

Hi Roxu,

Excuse the delay in giving feedback but, I've been out.
So after doing donwload and try all over again, I have the same result, the Tablet not pass the first screen.

It's possible for you to make firmware with the files I sent you (the ones i get from a working tablet).

Thanks for everything.

[diegotc]

Originalmente Escrito por jmendes1974

Hi Roxu,

Excuse the delay in giving feedback but, I've been out.
So after doing donwload and try all over again, I have the same result, the Tablet not pass the first screen.

It's possible for you to make firmware with the files I sent you (the ones i get from a working tablet).

Thanks for everything.

Hi jmendes, im macking firmware for your tab97qc. Is almost finished.
If you have acces to tab97qc in perfect running i will make the firmware more son.

[jmendes1974]

Hi diegotc
Yes i did a backup of a running with Rom_Backup_A10_A13 tool.

http://dfiles.eu/files/88ekrj0l0

Regards.

[diegotc]

Hi jmendes, thanks.

I made a Custom Rom of a tab97qc here:
http://www.htcmania.com/showthread.php?t=885407
If you need any help contact me.
Bye

[jmendes1974]

Good afternoon diegotc,

I've been downloading the files that you send in your toturial but for phoenixsuit works should have a ***.img file and is not what you have in the image file.
Can you help me?

Regards.

[diegotc]

Originalmente Escrito por jmendes1974

Good afternoon diegotc,

I've been downloading the files that you send in your toturial but for phoenixsuit works should have a ***.img file and is not what you have in the image file.
Can you help me?

Regards.

Hi, i fixed the tutorial.

The correct Image file is it> https://mega.co.nz/#!js8XzC7S!wynwic...he4LrpjxFRVsSQ

Thanks for the feeedback!

[Brutuz]

vaya..pensaba q este foro era en español...yo tengo el modelo 97DC, serian los mismos pasos salu2