|
||
|
#643
|
||||
|
||||
|
Debe estar subiendo nueva versión porque no me abre la página de descarga jeje
__________________
GALERÍA HUAWEI MATE 10
https://flic.kr/s/aHsm9gFSNA |
|
#647
|
||||
|
||||
|
Aquí el changelog.
10/02/14
Kernel 2.3 IN TEST: *Added busybox 1.22.1 fully pached and compiled by me! will be auto installed to ROM on boot. *Updated with main line kernel patch 79 *Updated BFQ from 6r2 to 7r1! boost i/o power greatly. can be selected via STweaks. *Added CPU controls over freqs min/max + gov change to STweaks App. *Fixed all scripts and STweaks install on boot. *Reduced logcat log size by half. *Updated SuperSu to 1.93 will be updated on boot. *Rearranged STweaks Tabs. *Added 3 new CPU govs, Nightmare by Alucard! Hyper by me!, Pegasusq All retuned to deliver balance performance and battery. you can tune as you wish. *Fixed STweaks Intelli temp control switch. now it's works + added core temp mod, (core is the MB + GPU) *Added patches to FS to speedup I/O access. *Added new HotPlug controller by Alucard! ported from Samsung I9505 for now it's OFF and no controls in STweaks. i need to test and work on tuning and controls for cpu cores. . ![]()
__________________
![]() "the price of privilege is poverty" - Russel Brand.
|
|
#648
|
||||
|
||||
|
Me he dado cuenta que al meter el kernel, el rendimiento grafico baja..
Primero me di cuenta por que al desbloquear el cel, me da un lag en el efecto de particulas.. Despues al hacer un antutu, en la parte de los graficos da un rango entre 38-48 fps! cuando con el kernel stock llega hasta 60 fps y se mantiene en un rango de 45-60. Por que podra ser? |
|
#649
|
||||
|
||||
|
Me he dado cuenta que al meter el kernel, el rendimiento grafico baja..
Primero me di cuenta por que al desbloquear el cel, me da un lag en el efecto de particulas.. Despues al hacer un antutu, en la parte de los graficos da un rango entre 38-48 fps! cuando con el kernel stock llega hasta 60 fps y se mantiene en un rango de 45-60. Por que podra ser? ![]() |
|
#651
|
||||
|
||||
|
Asi rinde la version 2.1, simplemente espectacular
__________________
Soy de Almeria pero no lo vayas diciendo por ahí,no me gusta presumir.
|
| Los siguientes 4 usuarios han agradecido a XX_DIABL1KO_XX su comentario: | ||
|
#652
|
||||
|
||||
|
Espectacular!!! Q rom llevas?
|
|
#654
|
||||
|
||||
|
Y de rendimiento cómo va? Se q no sirve de mucho pero te importaría hacer un antutu? Es q no soy partidario de bajar el rendimiento para gastar menos batería y esos consumos me parecen bestiales. Gracias y un saludo.
|
|
#655
|
||||
|
||||
|
De rendimiento va perfecta y va muy muy suave ni lag ni tirones ni nada va de fabula,lo siento compi no puedo hacer esa prueba que me pides de verdad pero yo no uso esos programas de antutu,el rendimiento lo veo yo dia a dia no hace falta que un programa me de unos números falsos,saludos y sorry
__________________
Soy de Almeria pero no lo vayas diciendo por ahí,no me gusta presumir.
|
| Los siguientes 4 usuarios han agradecido a XX_DIABL1KO_XX su comentario: | ||
|
#656
|
||||
|
||||
|
Gracias igualmente, me conformo con lo q dices, un saludo.
|
|
#657
|
||||
|
||||
|
Me podrían indicar como tienen configurado el kernel para un gran rendimiento de bata?
|
|
#658
|
||||
|
||||
|
Dorimanx 2.4 on líne.
|
| Los siguientes 2 usuarios han agradecido a jaco98 su comentario: | ||
|
#659
|
||||
|
||||
|
Changelog :
Kernel 2.4 ONLINE!
*Updated Busybox with all needed applets for all apps! *Added Alucard hotplug driver to STweaks now you can switch from default to others! *Retuned and and corrected intelli Cpu Temp control! will work good only with Intelli hotplug!!! Best BENCH performance for Showoff is with Default hotplug and Default Cpu Temp control! *Merged massive amount of updates from LG CM11, Nexus 5 kernel by Faux! and from i9505 Kernel from Alucard! Updates to INIT,LIB,NET,ARM,NEON,RAM,FS,INPUT,CPU,PWR and more! see GIT! *Updated SuperSu to 1.93 in kernel. If you dont want to get new SuperSu on each boot, got to STweaks and disable auto install in ROOT tab. simple! *Merged new CPU gov IntelliActive by faux123! it's very strong! but hungry for power! use for BENCH and showoff. *Retuned Ondemand default tuning! it's now very smart! also merged with CM11 updates. *Updated WIFI to save more power and merged more suspend filters to block JUNK noise. *Improved MTP file transfer Speed. *Merged Faux Screen Color tuning interface! (need app) *Added more FORCE to charge from any source at MAX, need to test! *Updated LOKI Patch to latest from Source! in github! Answer to post above! Go to STweaks app, and remove checkbox from CPU tab that control CPUFREQ below! min/max Then other apps can control kernel too. or just limit what you want in STweaks! all other apps are not MY kernel apps. Ondemand new tuning! after many tests! down_differential:10 down_differential_multi_core:3 enable_turbo_mode:1 high_grid_load:90 high_grid_step:20 ignore_nice_load:0 input_boost:0 io_is_busy:0 micro_freq_up_threshold:85 middle_grid_load:60 middle_grid_step:14 optimal_freq:0 optimal_max_freq:960000 powersave_bias:0 sampling_down_factor:1 sampling_rate:30000 sampling_rate_min:10000 sync_freq:2265600 up_threshold:80 up_threshold_any_cpu_load:80 up_threshold_multi_core:80 Update the OLD static sets in your APPS. ![]()
__________________
![]() "the price of privilege is poverty" - Russel Brand.
|
| Gracias de parte de: | ||
|
|
|
#660
|
||||
|
||||
|
|