[KERNEL] [JB 4.2.2 Kernel 3.4.86][05 APR] Dorimanx 3.5 LG G2 800/1/2/3/5/6 LS/VS980

[aurelianobue]

Dorimanx LG G2 Kernel para Rom Stock 4.2.2 y custom derivadas

Compatible con las roms Flex y Rayglobe

Es un Kernel desarrollado sobre la base del kernel original stock v10a.


Para las Roms STOCK 4.2.2 y derivadas

Solo para los modelos siguientes:
D800-D801-D802-D803-D805-D806-LS980-VS980

NO SE SOPORTARÁN OTROS MODELOS




Si quieres saber más sobre el autor:
http://about.me/dorimanx


++++++++++++++++++++++++++++++++++++++++++++++++++ ++

QUE ES LO QUE INCLUYE
texto original

 Cita:

.Default I/O Scheduling: ROW.
.More I/O Scheduling present in kernel: DEADLINE, NOOP, CFQ, SIO, BFQ.
.Default CPU frequency: 300-2496 MHz (MAX OC up to 2.5Ghz speed!).
.You can set MIN/MAX CPU Freq in CPU tuning apps.
.Default CPU governor: Ondemand.
.More CPU Govs present, conservative, performance, Intelidemand, OndemandPlus.
.Support for Kernel HOTPLUG (Inteli hotplug by @faux123)
.Support Inteli CPU Temp control (by @faux123)
.Support for CPUBOOST code.
.Support undervolt/overvolting via sysfs interface/apps interface.
.CIFS network share mounting supported.
.Debugging is OFF by Default to save CPU cycles, and extend battery life.
.Internal kernel function fixes (ie, memory leaks, scheduler fixes).
.High performance, low latency kernel.
.Compiled with -O2 flags and hardware neon-vfpv4 FPU enabled.
.Built from official LG v10a kernel source.
.Lokified during flash! support new VS980 12b BootLoaders.
.File systems support: Ext2/3/4, FAT32, CIFS, EXFAT, NTFS, USB OTG.
.WIFI Driver 1.88.49 ported from LG G2 KitKat Kernel Source.
.Sound Driver Control (Gain for headphones, mic, speakers) use Faux Sound App.
.Always forced fast charge! no matter what you select in ROM.
.Kernel created using Google GCC 4.8 ToolChain + all needed mods for it.
.Running Scripts from /system/etc/init.d/ is SUPPORTED but OFF in STweaks! if you need it, enable.
.STweaks Kernel Control App will be installed with kernel.
.Kernel will install Latest SuperSU on boot! and AUTO ROOT!

++++++++++++++++++++++++++++++++++++++++++++++++++ ++

INSTALACIÓN
.Debes de ser Root
.Tener un Recovery modificado
.Descargas el kernel y lo situas en tu SD CARD.
-Entras en modo Recovery.
.Flasheas el Kernel como si de cualquier archivo zip se tratase.
.Reinicias

Posibles Bugs:
*Miracast no funciona!
*El Brillo Automático no se activa con la misma suavidad en algunas custom ROMS
*Si tienes FC (Cierre Forzado) con la aplicación SuperSU, REINICIAS debería solucionar el problema.

++++++++++++++++++++++++++++++++++++++++++++++++++ ++

CHANGE LOGS:

texto original

12/04/14
Kernel 3.5

*New updates to Alucard HotPlug by DEV him self.
It's more smart and very powerful but that comes with the price of more battery drain.
Any way it's very good.
*Tuned and Updated Ondemand Gov. now much more battery friendly and still smart and fast.
*Many fixes to RAM and OOM code from main line kernel.
*I have merged Darkness CPU gov and Alucard Cpu GOV.
Darkness is good for battery save it's simple and doing what it's should by his name! Sleep! 
The alucard gov is not working as should, so leave it alone for now, it's STUCK on max freq all the time.
*I have merged Intelli Thermal driver in too MSM Thermal Driver + updated from KK Source.
We still have DEFAULT thermal that uses ROM binary + file config for temp control
And we have the Intelli Thermal as was but CORE of it is a lot better now! as it's now has all the rest of the driver that was OFF till now.
Any way it's working great with Intelli HotPlug or Alucard HotPlug.
Do not use it with Default HotPlug! freq will be stuck on on limited point when overheated!
Rom HotPlug have no idea how to rise to max again...
*Added some missing Kernel configuration based on KK Source!
Many of network code was missing for LS980 and VS980!
So this may fix many NET problems!
*Merged all new Critical patches for Kernel RAM and USB + MMC

This is probably LAST JB Kernel! new will be KitKat base


05/04/14
Kernel 3.4 STABLE

*Patched with 3.4.85 + 86 main line updates.
*Alucard24 made many updates/fixes to Alucard hotplug gov.
it's stable and good to use any time.
*Me and Alucard24, we updated the Intelli HotPlug and fixed all bugs in it.
Now it's working great, i use it as daily driver! it's extremely fast and powerful.
*Merged updates for OOM so RAM management is improved.
*Merged fix for RAM leak in video driver.
*Added SuperSu 1.94 to kernel zip.
*Updated Interactive and Ondemand Cpu Govs.
and tuned for best performance vs battery preserve.
*Boosted internal kernel clock from 100HZ to 200HZ
This give us performance boost in all functions across the kernel.
Dont look in BENCH tests, it's not shown there...
*Tweaked ROM Thermal Engine driver,
now it's will allow 82C max and stop limiting freq below 65C was (80/60) = Small performance boost.
*Fixed Block Ads file update. now will work as should.


30/03/14
Kernel 3.3 STABLE.

*Fixed delays in ondemand gov. now it's has supreme power.
*Merged CM11 KK updates from codeaurora.org
A lot of CPU, ARM and RAM bug fixes and improvements!
130 Commits!
CPU heat reduced. and delays eliminated.
Suspend improved and much more.


29/03/14
Kernel 3.2.1 STABLE.

*Fixed critical BUG with Intelli Hotplug and CPU stress tests!
any bench app was making hot boot if using Intelli HotPlug
Now OK. please update!


28/03/14
Kernel 3.2

*Fixed CPU idle! now stay more on low freq and save power.
*Fixed Ram leaks
*Reverted some of the USB and PWR code that i merged from KK and ZVA
i dont see any change, only more stable STOCK code.
*I and Alucard_24, we did really big rework to Intelli Hot plug driver and to Alucard HotPlug!
Now they work better and faster.
intelli HotPlug can be selected ONLY via STweaks! other apps dont see it any more.
The control path is changed, i have alerted Faux123 and offered to update his code and app with new path.
*Tuned intelli thermal control driver.
*Reworked all CPU govs to use global function!
*Updated to Max Entropy random generator code from 3.14.rc6 kernel.
*Updated MMC (Sdcard) code.
*Patched with 3.4.84 patch.


21/03/14
Kernel 3.1 Battery drain on idle reported: 

Fixed BUILD!
*Fixed boot for other branches
*Fixed high freq on idle.

*Updated with 3.4.83 main line patches.
*Merged some Power MNG code from KK Source
*Merged new updates to Intelli Hot Plug and Intelli Temp from Faux123 source!
*Merged Voltage corrections to cpu/gpu/screen to reduce power waste.
*Fixed Ondemand sampling rate and updated functions from Hyper to ondemand!
*Merged update to Alucard Hotplug
*Updated MMC code from KK Source! will reduce power usage on sleep.
*Merged fixes to cpu boost code! much less micro lags..
*Updated Entropy random code to speed up the system.
*Reverted some power/board merges from KK source that we cant use and best not to have till we move to KK ROM + Kernel.
*New the CPU Freq limit will work much better it's will not let user or any service / app to change cpufreq higher than the limit!
USE STWEAKS TO CONTROL MAX FREQ LIMIT!!!



16/03/14
Kernel 3.0 IN TEST:

*Reverted Sound code update from ls980 ZVA to fix Flac 24Bit 96Khz playback
via default player. (was working with paid players)
*Added Sweep2Sleep on/off in STweaks TWEAK tab.
*Merged many updates from KK Source kernel! that include:
Power code that allow great battery save on sleep and wake.
Modem Driver code, bug fixes,
CPU code fixes,
Memory bugs fixes.
*Merged new option for force fast charge to fake USB connection and force as AC
this mode has side effect, connection will be x2, 2 sounds 2 vibrates...
*Fixed locked max mA charge to 1500, now max 1800.
*Removed GPU govs SIMPLE and CONSERVATIVE. unstable and not really needed.
*Boosted all CPU govs to deliver more power and give as smoothness.

11/03/14
Kernel 2.9 STABLE:

*Reverted some of KK Kernel source updates to gain stability.
*Merged new WIFI driver 1.88.60 + all patches
*Tuned ondemand Gov to deliver good performance.
*Merged USB + NET +HWMON code from KK Kernel source 20c
*Updated NFC Driver for all branches
*Merged fixes to workqueue code for I/O operations.
*Removed some debug counters to free cpu from useless jobs.

Kernel reported to be stable and fast as should be. (i dont care about bench!)
it's normal any way...

09/03/14
Kernel 2.8 (REMOVED! too much BUGS with CPU)

*Fixed CPU gov lags.
*Added new patches from main line.
*Added Sweep2Sleep from left to right and backwards.
*Added Control interface for CPU OC. now user can have stock speed!
and nothing can change the speed higher! not app or service! only STweaks!
this is useful for battery save or just for personal needs.
*Locked max CPU temp in intelli thermal control to 75C!
No matter how much you set, max is 75! and it's more than needed.
if you want more heat use LG thermal control.
*Improved random entropy pool generation. it's used by many apps
and when pool is empty cpu work much more to generate and even lags the system.
*Disabled turbo boost for now. it's not really needed as logic was, if only 2 cores ON, then allow 2.8Ghz to be used, if more than 3 then 2.5Ghz max.
we have 4 cores on/off all the time, so code is pointless.
*Disabled touch freq boots to MAX in ondemand code, it's burning power for nothing. if i like to move icon i dont need 2.8Ghz for that..

07/03/14
Kernel 2.7 (Lag Bugs)

*Major Update from LS980 ZVA LG Source Code!
Fixed USB disconnects when battery is full!
Fixed USB disconnects when using not powered HUB!
*MAX CPU to 2.8Ghz! and MIN to 96Mhz by faux123
*New Loki Patch by PhilZ-cwm6
*Merged Sweep2Sleep code! very cool thing!
just swipe from right to left on soft buttons panel and phone will sleep!
then knock knock to wake! by savoca and ayysir
*Fixed memory leaks!
*Merged many fixes for NET,RAM,CORE,ARM,RTC,CPUFREQ,MM,SOUND
from main line, LG ZVA, and Android patches from other kernels.
*Merged New code for Ondemand CPU gov from I9505 Device kernel.
*Updated EXFAT Source from Samsung.
*Tuned Intelli Thermal code and Intelli HotPlug.
Now there are more controls in STweaks and Good scores in bench apps!
the overall performance is GREAT, no need for bench score to see that.
*Default LG Hotplug will reset MAX freq to 2.8Ghz no matter what you set in any App! including STweaks.
So to have lower max freq use Intelli hotPlug or Alucard hot Plug.
*Kernel will boot with max 2.3Ghz but LG Hotplug will set MAX after boot.
*Merged Some critical parts from new KK LG Source Kernel!
*Merged Turbo Boost code by faux123, will boost cpufreq when max 2 cores needed to finish task, then cpufreq will drop to min.
*Fixed profiles and scripts in ramdisk.
*I have set ondemand as GPU GOV, it's more stable than others.
*When using Intelli Temp control, dont go above 75C for CPU Temp!
Hot Boot will happen! 2.8Ghz is a serious thing.
Kernel panic on 88C but it's reach it so fast that code dont react so fast to reduce heat.
and puff! hot boot... stay with 75C max! stable as wall.

23/02/14
Kernel 2.6 (BUG with MEM LEAK.)

*Updated with 3.4.81+82 main line patches!
*Modded force fast charge code, and restored old hack parts to get max compatibility.
*Merged all new kernel updates from CM11 Kernel.
*Removed Gamma control code, it's was not working, and need more work and merges.
*Improved Ondemand CPU gov tuning and set it on boot for people that dont mess with controls.
now it's save power a lot and still responsive as needed.
*Merged Asynchronous Fsync by Faux123! to help with I/O speedup.
*Merged Implement conservative GOV for GPU by Entropy512
*Merged critical updates from main line kernel for global code operations and memory controls!
*Merged Updates for hotplug global code.
*Many other small patches see GIT.
*Added 1800mV limit for force fast charge, and set as default.

Profiles of STweaks will be reset to defaults to gain new options.

18/02/14
Kernel 2.5.1 (Bugs en modo carga rápida)

New Force Fast Charge driver made by Faux123!
+ STweaks interface for it!
STweaks profile will be reset to profile defaults to include new options!

Kernel 2.5 

*Updated with 3.4.80 update from main line.
*Updated BFQ with 7r2 patch.
*Fixed STweaks I/O gov settings.
*Fixed OOM low free RAM.
*Merged all new updates to kernel from CM11 source! big update to many functions!
*Fixed CIFS mounting /storage.
*Merged large update to suspend/wakeup code and to wakelock processing.
Also enabled wakelock junk collector that will remove dead wakelocks.
power save was never good as now! this is came from main line kernel 3.14.rc!
*Updates to intelliactive by faux, and updates to alucard hotplug by dev.
*Tuned Ondemand tunings.
*Switched to SIMPLE GPU Gov.
*Allowed to disable STweaks settings on BOOT. for people that like other apps.
*Improved logger and lowmem drivers.
*Updates to WIFI code.
*Merged system wide power_efficient workqueues that will reduce power usage in real time.

14/02/14
Kernel 2.4 (Estable)
*Updated Busybox with all needed applets for all apps!
*Added Alucard hotplug driver to STweaks
now you can switch from default to others!
*Retuned and and corrected intelli Cpu Temp control! will work good only with Intelli hotplug!!!
Best BENCH performance for Showoff is with Default hotplug and Default Cpu Temp control!
*Merged massive amount of updates from LG CM11, Nexus 5 kernel by Faux!
and from i9505 Kernel from Alucard!
Updates to INIT,LIB,NET,ARM,NEON,RAM,FS,INPUT,CPU,PWR
and more! see GIT!
*Updated SuperSu to 1.93 in kernel.
If you dont want to get new SuperSu on each boot, got to STweaks and disable auto install in ROOT tab. simple!
*Merged new CPU gov IntelliActive by faux123! it's very strong! but hungry for power!
use for BENCH and showoff.
*Retuned Ondemand default tuning! it's now very smart! also merged with CM11 updates.
*Updated WIFI to save more power and merged more suspend filters to block JUNK noise.
*Improved MTP file transfer Speed.
*Merged Faux Screen Color tuning interface! (need app)
*Added more FORCE to charge from any source at MAX, need to test!
*Updated LOKI Patch to latest from Source! in github!

10/02/14
Kernel 2.3 (Estable)
*Added busybox 1.22.1 fully pached and compiled by me!
will be auto installed to ROM on boot.
*Updated with main line kernel patch 79
*Updated BFQ from 6r2 to 7r1! boost i/o power greatly.
can be selected via STweaks.
*Added CPU controls over freqs min/max + gov change to STweaks App.
*Fixed all scripts and STweaks install on boot.
*Reduced logcat log size by half.
*Updated SuperSu to 1.93 will be updated on boot.
*Rearranged STweaks Tabs.
*Added 3 new CPU govs, Nightmare by Alucard! Hyper by me!, Pegasusq
All retuned to deliver balance performance and battery. you can tune as you wish.
*Fixed STweaks Intelli temp control switch. now it's works + added core temp mod, (core is the MB + GPU)
*Added patches to FS to speedup I/O access.
*Added new HotPlug controller by Alucard! ported from Samsung I9505
for now it's OFF and no controls in STweaks. 
i need to test and work on tuning and controls for cpu cores.

05/02/14
Kernel 2.2 (Estable)
*Fixed Mirracast wifi driver.
*Added Inteli CPU Temp control! enabled by default + STweaks control.
*Merged new code updates from CM11 Kernel source.
Including many CORE,FS,VIDEO,CAMERA,PWR,MEM,NET,CPU,ARM,STATS
updates and fixes. This is HUGE Update! see GIT 12 pages.
*Updated Ondemand + Interactive GOVS.
*Fixed CronTab activation and functions.
*Fixed Cortex script, removed obsolete code.
*Tuned WIFI and improved battery save + fast response to notifications.
*Cpu Freq + active GOV now set on all core equally!
*Merged CPU Boost code. need to tune it in next release.
So what you set on first core is set on all in the same time!
this will help me to restore STweaks CPU controls and manipulate min/max and boost boot and and wakeups!
*I have removed Tracers and more debuggers to free CPU from junk work!
more battery should be saved.
*Removed video cache error check and panic(reboots) some devices have bugs in video chips, so LG made code that check for errors and if found reboot!
this errors are tiny graphic glitches, that no one can see, but people get reboot if they found, i have disabled the check. no more reboots.

02/02/14
Kernel 2.1 (Estable)
*Updated from 3.4.0 --> 3.4.78 from main line updates.
Many fixes to CORE,NET,USB,PWR,ARM,SOUND,RAM
*Removed WIFI wakelocks! wifi is less responsive at deepsleep but save x10 power.
*Updated LOKI patch to support new bootloaders.
*Cleaned STweaks descriptions and fixed kernel update check.
*Improved Default ondemand GOV tuning, now no more lags or stuck freq when needed so much...
*Updated Miracast driver from LG KK Source, i hope it's will work now.
*Fixed critical permissions on boot.
*Fixed unknown kernel ver for some ROMS. (i didnt see that with rayglobe 4 rom!)

31/01/14
Kernel 2.0 (Estable)
*Made rebuild from LG G2 D802 10a source!
*Added all cool and critical stuff only!
*We are back to 3.4.0 for now till all checks are done.
*No more screen wakeups, i have not merged the Zero Wait code.
*No Wakelocks! sleep like a baby! (so happy)
*All should work as needed. but only YOU can tell me that.
*Removed WIFI wakelocks! wifi is less responsive at deepsleep but save x10 power.
Added NET Firewall that will block all noise including PING and IPv6!
*Added STweaks app to control kernel + advanced options + 5 profiles
but now it's simple and no longer mess with CPU freqs!
*Added Inteli Hot Plug driver for cpu on/off by kernel. need to deactivate default manager and enable inteli. not MUST! default is not bad at all!
use Faux123 App or trisker app.
* Added live AI script named by me, cortex_brain_tune that will handle extensive operations for PWR Save and NET control.
*Added NTFS driver for HDD over USB. my 1TB drive now mounted as should.
*Added SuperSU 1.91 ROOT app + SU to kernel, will be installed to system on boot. can be turned off via STweaks.
*We have sound controls
*We have CPU 2.5Ghz
*We have Voltage control
*We have New WIFI with disabled WAKELOCKS.
*We have improved PWR saver controls.
*We have 6 models support.
*INIT.D Scripts are Disabled by default! got to STweaks and enable if you think you need them.
I DONT! i dont like when someone else force my phone to do stuff.
but it's me.  if you enable in (OTHER tab) then only after boot it's will be RUNNING.
All profiles reset to defaults to clean the old not existing controls. one time only.

29/01/14
Kernel 1.9
*Rebased AGAIN the drivers from v10k LG Source.

29/01/14
Kernel 1.8

Rebased kernel source to LG JB v10k
This merge fixed many things in all wide rage of drivers!
*Removed WIFI wakelocks! wifi is less responsive at deepsleep but save x10 power.
Added NET Firewall that will block all noise including PING and IPv6!
*Updated Ondemand and Interactive CPU govs from LG KK Source.
*Added STweaks app to control kernel + advanced options + 5 profiles.
Need more work on cool addons and tuning for GOVS and much more...
*Added live AI script named by me, cortex_brain_tune that will handle extensive operations for PWR Save and CPU freq Boost on wakeup.
By default all CPU operations of max/min CPU freq can be tuned ONLY via STweaks! any other APP settings will be reset to STweaks value!
Now you get DEFAULT profile with max 2.29Ghz CPU.
You can tune the profile or select other from list in STweaks.
*Added NTFS driver for HDD over USB. my 1TB drive now mounted as should.
*Added SuperSU 1.91 ROOT app + SU to kernel, will be installed to system on boot. can be turned off via STweaks.
*Fixed too sensitive screen wakeup.
*Fixed Proximity delay on calls.
*Enabled Termo Control(over heat control by reducing max speed) for CPU by default.

24/01/14
Kernel 1.7 

*Rebased Sound Driver.
Now Default player will play 24bit tracks.
*Fixed Mounting HDD Disks.
*Reduced WIFI Wakelocks.
*Fixed Folder Mount
*Pulled Some updates from LG v10o JB Source.
*Fixed WIFI storage
*Possible fix for mirror cast, i cant test it. 

22/01/14
Kernel 1.6 

*Removed NTFS from kernel.
Use ntfs-3g to mount drives via ROM.
*Updated WIFI from LG KitKit kernel Source! replaced CM11 driver.
Driver version 1.88.49
*Fixed loading modules on BOOT.
(init.d scripts can be restored)

21/01/14
Kernel 1.5

*Added support for all branches.
NEED TO TEST! I didnt test! as i dont have the model!
So be ready to restore your model DEFAULT kernel in case of boot loop.
*Added Zero Wait Driver from LG KK Source! 
(improves screen wakeup and faster suspend on screen off)
*Fixed broken Reboot to recovery on some ROMS.
*Fixed broken rotation on some ROMS.
*Added PWR saver code to save power on suspend.
*Fixed PowerSuspend code, now it's really works.
*Logcat will not write anything on sleep any more. will save a lot of power!
*Removed some more debuggers that no one need.
*Loaded eXfat Driver on boot. now Large disk will work via OTG
*Added sound configs and ROM tuning to kernel.
*Improved proximity sensor response on call.
*Allowed ROM Dev to use ROM boot script to pass commands to kernel.
But with limits. ROM Dev should be ROM Dev. 
Kernel leave to me.

Have fun testing.

18/01/14
kernel 1.4

*Updated MMC driver from LG KK Stock Source kernel.
*Added busybox to /sbin + symlinks to support script commands.
*Fixed no WIFI on full STOCK ROMS (without busybox)

kernel 1.4.1
*Fixed CPU Stats and UV/OV permissions. now all apps see the CPU.


17/01/14

Kernel 1.3:

*Patched with 3.4.1 to 3.4.77 main line patches.
A lot of fixes to RAM,BT,WIFI,PWR,CORE,ARM,CRYPTO,FS(EXT4,FUSE,CIFS, FAT) and much much more.
*Added OC up to 2496Mhz
*Improved battery life
*Updated Sound driver from CM with hardware sound decoding.
*Added voltage UV/OV interface.
*Tuned All CPU Govs by default in kernel.
*Moved Kernel Modules to Ramdisk! will be added to ROM on boot.
*Fixed Sound Bugs with some Players
*Fixed Reboot Bug! (was shutting down and not rebooting)
*Added logs OFF on suspend code.
*Improved I/O Speed by using notime,nodiratime on file system.
*Fixed entropy fast depletion. (more will be added for this mod later)
*Disabled all performance counters that no one using, to boost performance and save battery.
*Merged Power suspend code to allow suspending drivers on sleep to gain more battery.
*Merged Frandom (random number generator, 
which is 10-50 times faster than what you get from Linux)
*Always Forced Fast Charge! even on MTP mode! so we get fast charging!
*Merged interface to mod Vibrate Force, for now via sysfs only.
*Merged CPUIDLE and NET updates for Android kernel from CM11 Kernel.
*Kernel Created using Google GCC 4.8 toolchain.
*Tuned SLUB RAM driver to operate faster.
*Added Exfat 1.2.4 Samsung Open source for Android Kernels.

++++++++++++++++++++++++++++++++++++++++++++++++++ +++
Compatibilidad de los Kernels según los modelos de G2:
D800 = AT&T Model
D801 = US Tmobile Model
D802 = International Model
D803 = Canada Model
D805 + D806 (igual que D802)
LS980 = SPR Model (Sprint)
VS980 = VZW Model (Verizon)
++++++++++++++++++++++++++++++++++++++++++++++++++ +++
LINKs OFICIALES DE DESCARGA
http://www.dorimanx.com/LG
o
http://www.dorimanx.shine.sk/LG
. Kernel Dorimanx y el Stock original


Enlace alternativo para el modelo d802 (aquí encontrarás algunas versiones retiradas por el desarrollador)
https://mega.co.nz/#F!R4EmWS5L!FhZpm8pW35VpabyJm33lUw

.................................................. ..........................

KERNEL STOCK ORIGINAL
https://mega.co.nz/#!hwExES5R!Jh6EJm...iUZ5yYmvU9h1iQ

++++++++++++++++++++++++++++++++++++++++++++++++++ ++

Hilo original: http://forum.xda-developers.com/show....php?t=2614400

++++++++++++++++++++++++++++++++++++++++++++++++++ ++

[jymxxl]

Lo acabo de probar y por lo menos a mi no me va el wifi

[bostrom]

 Cita: Originalmente Escrito por jymxxl

Lo acabo de probar y por lo menos a mi no me va el wifi

eso es xk el señor te ha castigao x ser del barça... jejejejejeje...

si no rula el wifis... no meto, me kedo con akura k va de luxe!!! jeje

salu2

[aurelianobue]

El wifi va por lo visto perfecto en las roms flex ROM 4 beta 3 y Rayglobe 3.5 Flex. Otros usuarios dicen que todo ok, o que la wifi no les funciona. El desarrollador dice que lo soluciona en las próximas horas.

[jymxxl]

Decir que llevo la minimalist

[aurelianobue]

Lo del wifi dice el desarrollador que lo soluciona en las próximas horas... Va todo muy bien, mucha velocidad, fluidez, todo genial.... Salvo el wifi de momento. Os mantengo al tanto.

Edito - ha localizado el fallo. Supongo que tendremos actualización en breve

[aurelianobue]

Para los que llevan la rom de G.Lewarne, debéis flashear la rom después de hacer caché y dalvick caché, SIN instalar la update 1.06 (es un fichero de cambios menores que no afectan a las prestaciones generales de la rom).Después del reinicio, volvéis a Recovery para flashear el custom kernel.
"viking37" forero de xda:
"(...) 1.06 patche can cause issues, no especially about wifi (...)

[manuelmagix]

Ya online la 1.4

http://www.dorimanx.com/LG

[aurelianobue]

Gracias. Actualizo en nada el hilo
Edito- mañana por la mañana le doy un lavado de cara al hilo. Este kernel tiene muy muy buena pinta!

[aurelianobue]

V-1.4 instalado.
Todo funciona perfectamente!
Wifi sin problemas!

[aurelianobue]

Rango de trabajo 300 - 2496 MHz.
Entrada en deep sleep sin problema. La rom se mueve muy muy bien, rapida y fluida, todo funciona perfectamente. Ya veremos el consumo después de que se asiente el kernel y unos cuantos ciclos de por medio.

[XX_DIABL1KO_XX]

ahí otra versión no?la 1.4.1

[aurelianobue]

 Cita: Originalmente Escrito por XX_DIABL1KO_XX

ahí otra versión no?la 1.4.1

Esto va que arde... Hace apenas 2 horas estaba en la versión anterior. Jajaja...
Edito - efectivamente, nueva versión 1.4.1

[aurelianobue]

Versión 1.4.1 instalada.
Todo ok. Wifi ok
Rango de frecuencia min/max igual a la versión anterior.

[ToRk]

Ostis! DoriManx , solo lo conozco por el SGS2 , pedazo Kernels hacia , lo probaré , pero me esperaré un poco , ya que apenas llevo el de Acura en la nueva Rom hace 1 dia , no llevo ni 1 ciclo 26horas , 3h 50 min de pantalla y me queda un 48% , y eso que systema android se a llevado lo mismo que de pantalla 28% van a la par , despues de pegarle repaso al de Acura , probaré este , que además seguro que habrá avanzado , si en solo 2 o 3 horas se a cascado 2 versiones

[aurelianobue]

 Cita: Originalmente Escrito por ToRk

Ostis! DoriManx , solo lo conozco por el SGS2 , pedazo Kernels hacia , lo probaré , pero me esperaré un poco , ya que apenas llevo el de Acura en la nueva Rom hace 1 dia , no llevo ni 1 ciclo 26horas , 3h 50 min de pantalla y me queda un 48% , y eso que systema android se a llevado lo mismo que de pantalla 28% van a la par , despues de pegarle repaso al de Acura , probaré este , que además seguro que habrá avanzado , si en solo 2 o 3 horas se a cascado 2 versiones

El tio es un hacha... No veas como solucionó el problema del wifi en un par de horas. Y es que no te da tiempo de flashear una versión que ya saca otra. La llevo puesta. Probé antes el dw lewarne hace un tiempo, y pasé página por tragón. Este me da muy muy buenas sensaciones. Además el overclock es razonable , no exagerado... Llevo la 1.4.1 y la voy a dejar por lo menos un día para ver como va.

[capilurrio]

Doy fe ahora sí.va el.wifi

[aurelianobue]

Test benchmark 37401. Primer ciclo de carga completo. De momento todo va muy bien.

[ToRk]

Oju, no me pongas los dientes largos!

[aurelianobue]

 Cita: Originalmente Escrito por ToRk

Oju, no me pongas los dientes largos!

no me gusta los ranking benchmark porque en el fondo no significan más que todo está bien instalado. Hay foreros que acaban de publicar test de 39400.