[KERNEL] Semaphore N4 3.4.2 [L/5.1.1][19 Mayo]

[Destro]

A mi no me han gustado los consumos despues de unos dias y me lo he quitado..

[pit23]

Nueva versión que corrige un bug,la1.7.5

[ozil78]

Alguien lo lleva con la eclypse? de momento el hells b39 va de lujo pero quiero saber cosas de este.

[pit23]

 Cita: Originalmente Escrito por ozil78

Alguien lo lleva con la eclypse? de momento el hells b39 va de lujo pero quiero saber cosas de este.

Si buscas consumos no comparado con el Hells...Pero en cambio en rendimiento es muy bueno;)

[ozil78]

 Cita: Originalmente Escrito por pit23

Si buscas consumos no comparado con el Hells...Pero en cambio en rendimiento es muy bueno;)

Tienes el enlace de la versión 1.7.5?no lo encuentro

[mikisbd]

 Cita: Originalmente Escrito por ozil78

Tienes el enlace de la versión 1.7.5?no lo encuentro

http://forum.xda-developers.com/atta...1&d=1382994316

[ozil78]

De momento perfecto el 1.7.1, buenisimo, muy rápido y super suave, probado con la eclypse.

[Edisondm]

 Cita: Originalmente Escrito por Gus_Tineo

Características:
- Linux kernel 3.4.67
- built with Linaro gcc 4.8.2 201306
- enabled O2 optimizations
- ondemand (Changed calculation of frequency, tweaked)
- conservative
- mpdecision dropped
- dyn_hotplug driver
- Noop scheduler (default)
- ROW scheduler
- SIO scheduler
- Touch wake
- Gamma control
- LED triggers: touchwake, thermal
- Undervolting
- removed many debug options


Kernel
Versión "j"
Descarga alternativa
Perfiles gamma de Franco para usar en Semaphore (gracias ironjon)




Las versiones >= a 1.5.0 son para JB 4.3
Las versiones "j" son para ROMs JSS15J
Las versiones normales son para ROMs JWR66V
*Antes de flashear una nueva versión resetea los ajustes de undervolting!


Semaphore Manager

Acerca del Undervolting:



Changelog:

(Click para mostrar/ocultar)

1.7.4 (23/10/2013)
- Linux kernel 3.4.67

- Fix logger loading issue in some custom ROMs

- ondemand: A small optimization in input event (thanks to skkip)


1.7.1 (03/10/2013)
- Linux kernel 3.4.64
- mach-msm: dyn_hotplug: On early suspend use min_online value of 1 (make use of C3 power state on CPU0 when the screen is off)
- mach-msm: dyn_hotplug: Use cpumask_next_zero to find the next offline CPU (thanks to Skkip)
- Possible fix from CAF for a cpuidle bug
- video: lm3530_bl: Introduce new tunables to control LED driver (LCD backlight)
lm3530_min_br: sets the minimum brightness level (2-114)
lm3530_max_br: sets the maximum brightness level (2-114)
lm3530_br_mode: sets the linear (default 1) or exponential (0) brightness mapping mode.
The sysfs path is /sys/devices/i2c-0/0-0038
Please note that the exponential brightness mode uses a very low LCD brightness on a low external light. You may need to increase the min_br for better results.


1.6.5 (17/09/2013)
- Linux kernel 3.4.62
- mach-msm: dyn_hotplug: Schedule driver's work only on CPU0
- mach-msm: dyn_hotplug: Offline the CPU with the lowest current frequency (thanks to Skkip)
- cpufreq: Fixes from Code Aurora
- cpufreq: conservative/interactive: Update the CPU utilization in policy for dynamic hotplug driver (should fix issues with hotplug)
- networking: Include Westwood TCP congestion control algorithm (CuBIC still the default)


1.6.0 (06/09/2013)
- Any Kernel Updater installation method, modified to inject all Semaphore changes on the fly to the current initramfs (thanks to Koush)
- Touchwake changes to avoid conflicts with TouchControl app (thanks to bponury)
- ondemand change to handle input only from touchscreen (CAF)
- Added a tiny service 'mpdfake' in initramfs, coded in C to consume PowerHAL messaged to missing mpdecision (fixes error messages in logcat)


1.5.7 (30/08/2013)
- Revert touchwake changes introduced in 1.5.6


1.5.6 (30/08/2013)
- Linux kernel 3.4.60
- Rework touchwake code for compatibility with TouchControl (thanks @bponury)
- mach-msm: board-mako-display: Use default values for LCD color temperature (should fix stock issue with 'fastboot boot' command. Thanks @mskip for reporting)
- mach-msm: subsystem_restart: Fix CPU detection (should fix issue that the subsystem_restart could not detect the CPU and panic_handler could not restart subsystems properly)


1.5.5 (23/08/2013)
- Linux kernel 3.4.59
- Fix compatibility issues with CM in initramfs
- Fix initramfs files ownership to root


1.5.3 (06/08/2013)
- Linux kernel 3.4.56
- dyn_hotplug: Add max_online tunable to control maximum number of online CPUs
- dyn_hotplug: Add checks when store tunables
- dyn_hotplug: code clean-up
- freezer: Fix deadlock issue (by Colin Cross)


1.5.2 (31/07/2013)
- Linux kernel 3.4.55
- mach-msm: acpuclock-krait: Fix PVS bin information in cputable info
- Add service call in init.rc about SuperSU daemon (recommended by Chainfire)
- Add CM10.2 support for su (untested)



1.5.1 (29/07/2013)
- Add gamma control
- Merge freezer changes
- Enable O2 optimizations
- Remove some debug options


1.5.0 (26/07/2013)
- Rebased on JB 4.3 (JWR66V) kernel. It should be used only on stock JWR66V.
Unmerged features (compared to 1.4.1):
- gamma control
- ROW scheduler
- O3 optimizations

1.4.1 (25/07/2013)
- Fix conflict of hotplug driver with cpufreq statistics
- Fix issue that may cause crash when enable hotplug driver


1.4.0 (22/07/2013)
- Linux kernel 3.4.54
- Dropped mpdecision (and related driver for exporting statistics to userspace)
- Introduce dyn_hotplug driver to automatically online/offline CPUs according to load. Parameters:
/sys/module/dyn_hotplug/parameters/enabled, valid values 0,1,Y,N,y,n. Default Y (enabled)
/sys/module/dyn_hotplug/parameters/up_threshold, over this threshold the driver will put one more CPU online
/sys/module/dyn_hotplug/parameters/min_online, minimum number of CPUs that will be always online. Default 2.
- Introduced new ondemand tunables to support touch boost:
touch_load: the simulated load when there is touch in the screen (default 75)
touch_load_threshold: over this load will be applied the touch_load (default 10)
touch_load_duration: the duration of the simulated load in msec (default 1100)
- cpufreq: ondemand: Default sampling rate to 20000
- leds: ledtrig-thermal: Rework code
- leds: Default led triggers to "none"
- built with Linaro 201306 (gcc 4.8.2)
- an update to framebuffer to fix some visual glitches (thanks to CM team, thracemerin)


1.3.0 (18/06/2013)
- Linux kernel 3.4.49
- cpufreq: ondemand: Drop early demand
- config: remove unused media tuner option



1.2.0 (02/06/2013)
- cpufreq: ondemand: Fix issue that could cause performance issue
- cpufreq: ondemand: freq_next should be proportional to cpuinfo.max_freq
- cpufreq: Remove unused code due to new calculation method of frequency target
- msm: cpufreq: Break out early if target frequency is the same as the current
- Use SLAB allocator instead of SLUB
- Enable O3 optimizations
- Build with Linaro 4.8.1 201305


1.1.0 (27/05/2013)
- Linux kernel 3.4.47
- cpufreq: ondemand: Calculate the next frequency proportional to current load
- cpufreq: ondemand: Default up_threshold to 95, sampling_rate to 30000
- freezer: updates from linux-next to help suspend/resume operation.
- block: couple of fixes from Code Aurora



1.0.0 (23/05/2013)
- Linux kernel 3.4.46
- msm: mako: Change CPU regulators min_uV to 700mV (thanks to sirxdroid, thracemerin)
- ledtrig-thermal: Do not update LED brightness when there is no actual change.
- msm: acpuclock-krait: Cleanup code, fix a typo in message
- cpufreq: ondemand: Increase DOWN_DIFFERENTIAL to avoid oscillations between max - min freq
- config: little cleanup


0.9.5 (17/05/2012)
- Rename undervolting parameters upper_uV and upper_khz_thres to higher_uV and higher_khz_thres respectively.
- acpuclock-krait: small improvements
- LED thermal trigger: Check temp every 5s when LED is off, every 2s when LED is on
- Noop as default scheduler



0.9.0 (15/05/2013)
- Add undervolting support *
- msm: acpuclock-8064: Add support for 8064v1.1 FASTER PVS bin (updated voltage table)
- msm: acpuclock-krait: improvements and fixes from Code Aurora
- msm: acpuclock-krait: small improvements
- msm: Makefile: remove some acpuclock redundant files.



0.8.0 (12/05/2013)
- Linux kernel 3.4.45
- cpufreq: interactive: many updates from Code Aurora
- leds: thermal trigger: increase low threshold to 52℃



0.7.5 (08/05/2013)
- Linux kernel 3.4.44
- leds: Switch off LED when thermal trigger deactivated
- Change some compiler flags (hopefully little bit better performance)
- Remove many ugly debug messages in WiFi driver, and a message in charger driver.



0.7.0 (06/05/2013)
- leds: Do not remove trigger when brightness = LED_OFF (fixes conflicts between LED trigges and notification lights)
- touchwake: Introduce new LED trigger (name touchwake) that switch on LED when the touchwake is active.
- leds: Add LED trigger for thermal sensor (switch on LEDs when temperature >= 47, with brightness proportional to the temperature)
- mako: Use default triggers: Blue - touchwake, Red - thermal, Green - battery full
- more clean ups to config (remove tracers, KALLSYMS)



0.6.0 (01/05/2013)
- Linux kernel 3.4.43
- Fix issues with logger module
- Enable KALLSYMS



0.5.5 (30/04/2013)
- video: msm: Expose gamma table to sysfs* (thanks to faux123, franciscofranco for ideas)
- android: logger: Compiled as module** (disable by default)
- Clean up configuration (excluded swap support, ext2, ext3, some debug options)
- touchwake: clean code, remove debug information
- msm: acpuclock: Lower max L2 speed to 1134MHz (fix from Code aurora)
- built with Linaro gcc 4.7 201304



0.5.0 (26/04/2013)
- Linux kernel 3.4.42
- touchwake: Fix reboot issues
- touchwake: small improvements
- touchscreen: Show accuracy filter and jitter filter parameters in sysfs (you may tune them from Semaphore Manager)
- change vibrator sysfs permissions (now vibrator works in SAI options)



0.4.0 (22/04/2013)
- Add ROW scheduler and make it default (thanks to Tatyana Brokhman)
- block: a couple of fixes from code aurora
- wifi: upstream fix.
- Fix compatibility issues with CM10.1
- drivers: msm_fb: Apply kcal values when screen on (more info here)



0.3.0 (20/04/2013)
- Linux kernel 3.4.41
- ondemand: default sampling_rate 20000, up_threshold 85
- init scripts support (/etc/init.d/ directory must exists, busybox required)
- drivers: touchwake support - EXPERIMENTAL (thanks to Ezekeel for initial implementation)
Enable:
echo 1 > /sys/devices/virtual/misc/touchwake/enabled
Delay in ms:
echo xxxxx > /sys/devices/virtual/misc/touchwake/delay


0.2.0 (15/04/2013)
- android: logger: fixes from 3.9 kernel
- android: lowmemorykiller: updates from 3.9
- android: binder, timed_output: minor fixes from 3.9
- block: Added SIO scheduler (and cleaned some code)
- cpufreq: ondemand: early demand feature (more info here)
enable it:
echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/early_demand
You may also control the threshold:
echo XX > /sys/devices/system/cpu/cpufreq/ondemand/grad_up_threshold (default 50)
- cpufreq: ondemand: fixes that have beed applied in Linux 3.9
- cpufreq: included conservative governor
- cpufreq: conservative: fixes that have been applied in Linux 3.9
- removed some debug options from configuration
- Compiled with gcc 4.7


0.1.0 (13/04/2012)
- Linux kernel 3.4.40
- enabled O2 optimizations

Ir al link original: http://forum.xda-developers.com/showthread.php?t=2232898

Funcionando perfectamente .
Fluidez mejorada.
Rendimiento con Quadrant de 5000 a 5300.
Istaslado touchcontrol y funcionando.
Y mi gran problema resuelto me lo reconoce el pc y puedo entrar en todos mis archivos.

[overhtc]

Version 1.7.6 disponible

- Linux kernel 3.4.68
- touchwake: Fix issue when disabling driver during screen off and wakelock was active (thanks @ihancioglu for his report)
- ondemand: a small cleanup in code (thanks @jugster)

[cortizo]

el touch control solo le da soporte a la versión 1.5.8 de semaphore. cómo lo puedo hacer funcionar con la última versión?

edito: ya lo he solucionado. ;)

[Edisondm]

 Cita: Originalmente Escrito por cortizo

el touch control solo le da soporte a la versión 1.5.8 de semaphore. cómo lo puedo hacer funcionar con la última versión?

edito: ya lo he solucionado. ;)

Tengo la ROM stock rooteada compilacion JWR66Y con este kernel y me funciona el touchcontrol con la versión 1.5.8 de maravilla.
Y con la aplicación battery saver pro el rendimiento y duración de la batería es muy bueno.
De momento me quedo así.
Solo me da un problema que aveces hace unos reiniciós muy cortos donde me sale la cruz inicial me dice actualizando y después pasa a la pantalla de bloqueo.
Por lo demás lo dicho fluidez rendimiento muy bueno y el touchcontrol funcionando.

[id63033]

Pregunta... puedo poner este Kernel a la recién llegada Rom STOCK KRT160? eh? eh? puedo?

[Morales92]

 Cita: Originalmente Escrito por fap31

Pregunta... puedo poner este Kernel a la recién llegada Rom STOCK KRT160? eh? eh? puedo?

No.

[id63033]

Y que le pongo?

 Cita: Originalmente Escrito por Morales92

No.

[dizinho]

 Cita: Originalmente Escrito por fap31

Y que le pongo?

Que yo sepa, nada, hasta que no se empiecen a actualizar los kernels para ser compatibles con la baseband y radio nuevas.

[id63033]

Raro... habiendo por aquí un montón de Roms cocinadas de 4.4 KRT160, algunas con kernel propio, otras con kernels recomendados... al margen de las que usan el Stock.

tendré que ponerme al día...

 Cita: Originalmente Escrito por dizinho

Que yo sepa, nada, hasta que no se empiecen a actualizar los kernels para ser compatibles con la baseband y radio nuevas.

[evogp]

Podes pero tenes que instalar el fix de WiFi en algunos casos y las que habían usaban binarios de 4.3 por eso

[T-RoR]

Estoy intentando reducir el consumo de bateria, puedo (y si puedo como debo hacerlo?) poner este kernel a una Panaroid Android 3.99 RC2?

[T-RoR]

La compilación de mi N4 es JLS36G ¿Cual debo de bajarme?

[T-RoR]

He puesto 1.7.6 normal. Los valores de undervolting para un chip fast serían los mismos que para el franco k.?

Me estoy rayando. Acabo de aplicar estos valores:

https://www.dropbox.com/s/qebwbcz93r...2014.17.52.png

Pero no se si tengo que marcar "apply on boot" o no...

Edito por segunda vez: pues parece que sí porque si no al reiniciar se pierden los valores...