ROMs y desarrollo Samsung Galaxy S I9000 ROMs y desarrollo Samsung Galaxy S I9000

Respuesta
 
Herramientas
  #161  
Viejo 07/09/13, 22:32:10
Array

[xs_avatar]
djdedo djdedo no está en línea
Miembro del foro
 
Fecha de registro: ago 2012
Mensajes: 312
Tu operador: Movistar

ya vieron esta ultima changelog del dia 8 ? impresionante!!


Mokee Open Source Changelog from 09/07/2013 - today
---------------------------------------------------------------

Project: kernel/lge/gproj
Laura Abbott - gpu: ion: Flush new pages
Laura Abbott - mm: Use aligned zone start for pfn_to_bitidx calculation
Laura Abbott - fs: fuse: Workaround for CMA migration
Minchan Kim - cma: fix migration mode
woojoong.lee - cma : use migrate_prep() instead of migrate_prep_local()
Laura Abbott - mm: Add is_cma_pageblock definition
Liam Mark - mm: split_free_page ignore memory watermarks for CMA
Laura Abbott - common: DMA-mapping: Add strongly ordered memory attribute
Larry Bassel - mm: make counts of CMA free pages correct
Joonsoo Kim - slub: fix a memory leak in get_partial_node()
Joonsoo Kim - slub: fix a possible memory leak
Laura Abbott - ARM: dma-mapping: Allow highmem pages to not have a mapping
Marek Szyprowski - ARM: dma-mapping: add support for CMA regions placed in highmem zone
Chris Brand - ARM: mm: fix MMU mapping of CMA regions
Laura Abbott - arm: dma: Allow CMA pages to not have a kernel mapping.
Laura Abbott - arm: dma: Expand the page protection attributes
Ricardo Cerqueira - gproj: remove obsolete DMM code
Larry Bassel - msm: remove obsolete DMM code and config options
Jordan Crouse - msm: kgsl: Always send fence sync the timestamp it expects
Oleg Nesterov - wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task
Oleg Nesterov - ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL
Oleg Nesterov - ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up()
Jeff Ohlstein - sched_avg: add run queue averaging.
Mekala Natarajan - sched: provide per cpu-cgroup option to notify on migrations
Joonsoo Kim - ARM: 7693/1: mm: clean-up in order to reduce to call kmap_high_get()
Hareesh Gundu - msm: kgsl: Always Signal event time timeline for every event type
Yan He - msm: sps: free the interrupt for satellite mode
Yan He - msm: sps: turn off BAM DMA clock after initial config
Yan He - msm: sps: enable BAM DMA client to control BAM DMA clock
Yan He - msm: sps: remove the address checking for descriptors
Yan He - msm: sps: improve BAM inactivity timer function
Yan He - msm: sps: adapt to clock API change
Mitchel Humpherys - msm: Kconfig: Disable SPARSEMEM for A-Family targets
David Howells - FS-Cache: Don't sleep in page release if __GFP_FS is not set
Minchan Kim - mm: use up free swap space before reaching OOM kill
Konstantin Khlebnikov - mm/vmscan: store "priority" in struct scan_control
Rik van Riel - mm: remove swap token code
Konstantin Khlebnikov - mm/memcg: use vm_swappiness from target memory cgroup
Satoru Moriya - mm: avoid swapping out with swappiness==0
Konstantin Khlebnikov - mm/memcg: kill mem_cgroup_lru_del()
Konstantin Khlebnikov - mm: remove lru type checks from __isolate_lru_page()
Konstantin Khlebnikov - mm: push lru index into shrink_[in]active_list()
Tim Chen - memcg: gix memory accounting scalability in shrink_page_list
Hugh Dickins - memcg: further prevent OOM with too many dirty pages
Michal Hocko - memcg: prevent OOM with too many dirty pages
Mel Gorman - mm: vmscan: remove reclaim_mode_t
Mel Gorman - mm: vmscan: do not stall on writeback during memory compaction
Mel Gorman - mm: vmscan: remove lumpy reclaim
Ajay Dudani - footswitch: Fix setting MSM_RPM_ID_RPM_CTL for force_bus_clocks
Shashank Mittal - msm: footswitch-8x60: Skip GFX memory power collapse on 8064.
Matt Wagantall - msm: footswitch-8x60: Allow specification of per-fs reset delays
Taniya Das - ARM: Fix negative idle stats for offline cpu
Stephen Boyd - ARM: sched_clock: Load cycle count after epoch stabilizes
Joonsoo Kim - ARM: 7643/1: sched: correct update_sched_clock()
Felipe Balbi 2 - ARM: 7565/1: sched: stop sched_clock() during suspend
Colin Cross - ARM: 7486/1: sched_clock: update epoch_cyc on resume
Srivatsa Vaddagiri - arm: Remove no-longer-required RCU_NONIDLE wrapper
Russell King - ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS
Matt Wagantall - msm: footswitch-8x60: Update 8064 footswitch_enable() sequence for GFX3D
Matt Wagantall - msm: clock: Expose parts of "clock.h" through <mach/clk-provider.h>
Matt Wagantall - msm: clock: Allow registration of multiple MSM clock tables
Matt Wagantall - msm: clock-8960: Add 1.8MHz rate to 8064's gfx3d_clk plan
Arun Bharadwaj - tracing/sched: Add trace events to track cpu hotplug.
Rohit Gupta - trace: power: Adding trace events for cpufreq
Matt Wagantall - msm: acpuclock-krait: Enable HFPLL for init only if switching to it
Syed Rameez Mustafa - lib: spinlock_debug: increase spin dump timeout
Vikram Mulukutla - lib: spinlock_debug: Avoid livelock in do_raw_spin_lock
Sujit Reddy Thumma - PM / QoS: Fix deadlock during PM QoS vote to default value
Syed Rameez Mustafa - Revert "msm: move printk out of spin lock low_water_lock"
Peter Boonstoppel - sched: Unthrottle rt runqueues in __disable_runtime()
Ajay Dudani - hrtimer: Don't reinitialize a cpu_base's lock on CPU_UP
Ajay Dudani - timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
Devin Kim - timers: Fix endless looping between cascade() and internal_add_timer()
Mekala Natarajan - sched: remove migration notification from RT class
Mekala Natarajan - sched: provide per cpu-cgroup option to notify on migrations
Patrick Daly - msm: cpufreq: Update frequency index
Saravana Kannan - msm: cpufreq: Add support for CPU clocks and msm-cpufreq device
Saravana Kannan - msm: cpufreq: Ensure cpufreq change happens on corresponding CPU
Matt Wagantall - msm: cpufreq: Relax constraints on "msm-cpufreq" workqueue
Mahesh Sivasubramanian - msm: cpufreq: Configure WQ for higer priority
Jennifer Liu - msm: cpufreq: Always update frequency limits when core is online
Praveen Chidambaram - msm: cpufreq: Initialize cpufreq driver early at boot
Praveen Chidambaram - Revert "msm: cpufreq: Remove cross-calling limitation"
Srivatsa Vaddagiri - cpufreq: Retain only online cpus in managed_policy->cpus
Matt Wagantall - cpufreq: ondemand: Fix hotplug deadlock with store_powersave_bias
Rohit Gupta - cpufreq: Adding traces to the cpufreq
Rohit Gupta - cpufreq: ondemand: Fix update_sampling_rate race with hotplug
Dilip Gudlur - cpufreq: ondemand: add input_boost interface
Stephen Boyd - cpufreq: Avoid using smp_processor_id() in preemptible context
Tingwei Zhang - cpufreq: ondemand: Boost CPU frequency only for touch input
Rohit Gupta - cpufreq: ondemand: Disable freq sync feature in store_powersave_bias
Rohit Gupta - cpufreq: ondemand: Fix locking issue in store_powersave_bias
Ajay Dudani - cpufreq: ondemand: change freq sync code to use per-CPU kthreads
Ajay Dudani - cpufreq: Use dedicated high-priority workqueues
Mekala Natarajan - msm: Synchronize CPU frequency on thread migration
Stephen Boyd - msm: SSR: Remove useless warning
Mitchel Humpherys - msm: iommu: re-use existing buffers for `extra' mappings
Maheshwar Ajja - msm: vidc: Get the current performance level
Maheshwar Ajja - msm: vidc: Handle mgen2maxi interrupt in video driver
Maheshwar Ajja - msm: vidc: Allow client to set turbo mode
Maheshwar Ajja - vidc: Turbo mode for multiple instances
Maheshwar Ajja - msm: vidc: Remove unncessary unmap function calls
Maheshwar Ajja - msm: vidc: Optimize IOMMU map size for H264 decoder
Srinu Gorle - msm: vidc: Remove unwanted error message
Deepak Verma - msm: vidc: Set extradata flag properly
Rajeshwar Kurapaty - msm:vidc: Add support for MP2 sequence end code
Srinu Gorle - msm: vidc: Do not reset VCD_FRAME_FLAG_DATACORRUPT flag for VC1
Rajeshwar Kurapaty - msm: vidc: Amend the check to reset data corrupt flag
Rajeshwar Kurapaty - msm: vidc: Add support for Mpeg-2 open-gop handling
Shobhit Pandey - msm: vidc: Fix compilation errors
Maheshwar Ajja - msm: vidc: Update sub_anchor_mv buffer size
Shobhit Pandey - msm: vidc: Correct log tagging for kernel messages
Maheshwar Ajja - msm: vidc: Free buffer pool entry and then delete address table
Maheshwar Ajja - msm: vidc: Fix metadata buffer size issue
Maheshwar Ajja - msm: vidc: Correct the display size of small resolution clips
Maheshwar Ajja - msm: vidc: Fix possible memory corruption
Deva Ramasubramanian - msm: vidc: Invalidate cache when allocating buffers
Gopikrishnaiah Anandan - vidc: Handle descriptor buffer error as warning
Deepak Verma - msm: vidc: Free meta buffers during address table cleanup
Maheshwar Ajja - msm: vidc: Remove delayed unmap flag in ion_map_iommu()
Maheshwar Ajja - msm: vidc: Remove kernel mapping on input/output buffers
Padmanabhan Komanduru - msm_fb: Avoid MDP mixer reset from ISR context
Kuogee Hsieh - msm_fb: display: add an extra write of 0 to clear dsi-ack-err bit
Sangani Suryanarayana Raju - msm: display: Proper handling of prepare and unprepare clocks
Mekala Natarajan - video: msm: Initialize HistLUT with last saved LUT
Mekala Natarajan - video: msm: Maintain histogram LUT state through suspend resume
Kuogee Hsieh - msm_fb: display: add early_off during panel off
Jeevan Shriram - msm_fb: Correct R and G offsets for correct mapping
Kuogee Hsieh - msm_fb: display: Do clock control within mdp4_hw_init
Naseer Ahmed - msm: mdp: Free secure memory based on pipe config
Olav Haugan - gpu: msm: Allow retries for 0 order allocation
Deva Ramasubramanian - msm: mdp: Move wfd state signalling into mdp driver
Shalaj Jain - msm:wfd: Unregister switchdev before freeing memory
Amara Venkata Mastan Manoj Kumar - msm: Add switch node mechanism for wfd
Huaibin Yang - msm_fb: display: add wfd suspend/resume to early suspend
Mayank Goyal - msm_fb: display: release mdp clk in mdp4_overlay_writeback_on()
Padmanabhan Komanduru - msm_fb: Remove the extra freelist in display_commit
naseer - msm: mdp: Unmap secure memory on dtv off
Steve Kondik - video: msm: Cleanup
Huaibin Yang - msm_fb: display: issue completion when disabling vsync irq
Mayank Chopra - msm_fb: display: Do a pre-fill to writeback buffers.
Neti Ravi Kumar - msm_fb: display: Add null check for base layer
Vishnuvardhan Prodduturi - msm: display: Do not commit in unset for external.
Mayank Chopra - msm_fb: display: Add minimum src/dst image size validation for MDP
Mayank Chopra - msm_fb: display: Fix interleaved 422 input format register settings
Mayank Goyal - msm: rotator: Add pseudo-planar 422 H1V2 dst format for MDP4
Kuogee Hsieh - msm_fb: display: add one more pipe_commit delay before free ion buffer
Mekala Natarajan - msm:video: Enable the LUT update on DSI command mode panel

Project: build
Ryuinferno - OTA: Move prebuilt stuff to vendor (1/2)
Ricardo Cerqueira - Restore original behavior when PRODUCT_BOOTANIMATION is undefined
Steve Kondik - envsetup: Use wait-for-online so these cmds work in recovery

Project: packages/apps/Mms
Tamas Toth - Mms: HU translation
Michael Bestas - Mms: EL translations

Project: packages/apps/Apollo
Tamas Toth - Apollo: HU translation
Michael Bestas - Apollo: EL translations

Project: packages/apps/Settings
martincz - Settings: cleanup
martincz - Settings: remove reduplicate class

Project: device/lge/e975
Ricardo Cerqueira - Remove leftovers
Ricardo Cerqueira - Update ondemand configuration

Project: device/lge/mako
martincz - mako: kernel branch changed
Steve Kondik - mako: Enable additional power modes
Ricardo Cerqueira - mako: Switch to unified MSM nexus kernel

Project: device/samsung/omap4-common
Abimanyu G - fix hwc defs

Project: device/motorola/omap4-common
Hashcode - fix hwcomposer defs

Project: frameworks/base
Marco Brohet - Enable extra languages (2/2)
jackmu95 - Core: Update German translation

Project: external/bluetooth/bluedroid
Steve Kondik - Move QCOM enhanced features under QCOM_SW ifdef

Project: vendor/mk
Ryo


http://old.androidfilehost.com/main/...50-NIGHTLY.zip

Última edición por djdedo Día 07/09/13 a las 22:40:05.
Responder Con Cita
Los siguientes 2 usuarios han agradecido a djdedo su comentario:


  #162  
Viejo 07/09/13, 23:24:02
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
He visto testamentos más cortos
Responder Con Cita
  #163  
Viejo 07/09/13, 23:47:04
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
Lo que si parece es que casi todo son cambios para el lge
Responder Con Cita
  #164  
Viejo 08/09/13, 00:47:38
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
NIGHTLY de Mokee ROM 43.0 (Actualizada al dia 08/09/13)

https://mega.co.nz/#!Mh4UHSYZ!VNyi6m...OGChqtHjfOLb-U


Responder Con Cita
Los siguientes 2 usuarios han agradecido a eliherx su comentario:
  #165  
Viejo 08/09/13, 19:06:02
Array

[xs_avatar]
djdedo djdedo no está en línea
Miembro del foro
 
Fecha de registro: ago 2012
Mensajes: 312
Tu operador: Movistar

[Android 4.3] 【MoKee OpenSource For Galaxy S|I9000】2013年09月08日更新


http://pan.baidu.com/share/link?shar...&uk=1160557519
Responder Con Cita
Gracias de parte de:
  #166  
Viejo 08/09/13, 21:21:44
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
RELEASE de Mokee ROM 43.0 (Actualizada al dia 08/09/13)

https://mega.co.nz/#!g5xlkCiT!VCDZKx...7W5eGSBkR2Jiqk


Responder Con Cita
Los siguientes 3 usuarios han agradecido a eliherx su comentario:
[ Mostrar/Ocultar listado de agradecimientos ]
  #167  
Viejo 08/09/13, 22:32:16
Array

[xs_avatar]
djdedo djdedo no está en línea
Miembro del foro
 
Fecha de registro: ago 2012
Mensajes: 312
Tu operador: Movistar

Mokee Open Source Changelog from 09/08/2013 - today
---------------------------------------------------------------

Project: kernel/google/msm
Ricardo Cerqueira - bcm2079x: Ignore the BCMNFC_CHANGE_ADDR ioctl on flo/deb
Ricardo Cerqueira - Revert "Remove a workaround since BCM20793 chip default is 7 bits address."
Ricardo Cerqueira - Revert "msm: pm: Remove unused variable"
Ricardo Cerqueira - Revert "msm: pm: Fix broken reg_val check"
Ricardo Cerqueira - msm: pm: Fix broken bits
Steve Kondik - cm: Create CM configs for Flo and Mako
Steve Kondik - msm: Add change command for saw regulators on mako/flo
Laura Abbott - msm: scm: Add scm_call_noalloc and helper macros
Mark Rutland - ARM: perf: add L2x0 PMU driver
Steve Muckle - msm: dcvs: fail gracefully if TZ does not support dcvs
Priyanka Mathur - msm: spm_devices: do not program SPM on cores more than present
Mahesh Sivasubramanian - msm: spm_devices: Initialize return error code
Mahesh Sivasubramanian - msm: spm_devices: Disable SPM APIs when device isn't registered
Mahesh Sivasubramanian - msm: spm_devices: Update notify_rpm flag for L2 retention
Praveen Chidambaram - msm: spm: Conform comments to coding standards
Girish Mahadevan - msm: spm: Add msm_spm_get_vdd() API for SAW v1 driver
Stephen Boyd - cache_erp: Use seq_printf and modernize procfs code
Stepan Moskovchenko - msm: cache_erp: Dump I/O regions on cache errors
Stepan Moskovchenko - msm: cache_erp: Handle recoverable L1 errors
Mahesh Sivasubramanian - msm: spm-v2: Store voltage levels into PMIC_DATA3
Anji Jonnala - msm: spm-v2: NULL check for dev pointer
Praveen Chidambaram - msm: spm-v2: Add API to enable PFM mode on PMIC
Michael Bohan - msm: acpuclock-krait: Use standard regulator APIs during CPU Hotplug
Michael Bohan - msm: saw-regulator: Support enable and disable
Matt Wagantall - msm: acpuclock-krait: Only print supported number of frequencies once
Matt Wagantall - msm: acpuclock-krait: Remove inapplicable 8064 errata workaround
Matt Wagantall - msm: acpuclock-krait: Add __init markings to 'krait vmin' functions
Matt Wagantall - msm: acpuclock-krait: Add support for HFPLL lock detect bit polling
Patrick Daly - msm: acpuclock-8960ab: Increase L2 frequency
Matt Wagantall - msm: acpuclock-krait: Support alternate PVS and speed bin format
Matt Wagantall - msm: acpuclock-krait: Add a debugfs interface
Steve Kondik - msm: Fix nonboot SPM configuration
Steve Kondik - mako: Fix typo in config
Steve Kondik - msm: pm: Fix broken reg_val check
Anji Jonnala - msm: pm-stats: Move to seq_file and friends
Girish Mahadevan - ARM: cache_l2x0: Set outer_cache resume
Steve Kondik - msm: pm: Remove unused variable
Steve Kondik - mako/flo: Update for pm-8x60 changes
Praveen Chidambaram - arm: msm: Fix section mismatch discrepancies in power drivers
Priyanka Mathur - msm: pm-8x60: Increase warn timeout for sleep sts check
Venkat Devarasetty - msm: pm: add failed stats
Mahesh Sivasubramanian - msm: pm-8x60: Fix incorrect computation of wakeup times

Project: build
Ryuinferno - OTA: Get MK_BUILDTYPE directly from build vars

Project: packages/apps/Mms
martincz - Mms: cleanup
martincz - Mms: fix Recipients NPE

Project: packages/apps/Apollo
Gustavo - Apollo: PT-BR update translations

Project: packages/apps/DeskClock
martincz - DeskClock: update drawable

Project: packages/apps/Settings
martincz - Settings: fix error package view
martincz - Settings: Simplified Chinese Translations
Francesco - Settings: IT translations
Gustavo - Settings: PT-BR update translations
Ondrej Zima - Settings: CS translation
Michael Bestas - Settings: EL translations
martincz - Settings: Simplified Chinese Translations
martincz - Settings: fix build error
martincz - Settings: fix CustomLabel get/set value

Project: device/lge/mako
Steve Kondik - mako: Enable QCOM Bluetooth enhancements
Steve Kondik - mako: Enable QRNGD

Project: device/samsung/galaxys2-common
Daniel Hillenbrand - galaxys2: require vendor

Project: device/samsung/aries-common
Pawit Pornkitprasan - aries-common: set TARGET_ARCH_LOWMEM

Project: device/samsung/smdk4412-common
Daniel Hillenbrand - smdk4412: require vendor

Project: device/samsung/omap4-common
Daniel Hillenbrand - samsung omap4: require vendor

Project: .repo/manifests
martincz - Android: Add BluetoothExt repository

Project: android
martincz - Android: Add BluetoothExt repository

Project: frameworks/base
martincz - Frameworks: Simplified Chinese Translations
martincz - Revert "SystemUI: fix pie when rotation on"
martincz - SystemUI: fix pie when rotation on
martincz - Frameworks: Update Resource

Project: frameworks/opt/telephony
Shareef Ali - SamsungQualcommRIL: skip setCdmaSubscriptionSource if CDMA_SUBSCRIPTION_MODE is null

Project: external/bluetooth/bluedroid
Hemant Gupta - Bluetooth: Add support for disconnecting HID based on priority

Project: vendor/mk
mar
Responder Con Cita
Gracias de parte de:
  #168  
Viejo 08/09/13, 23:12:09
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
NIGHTLY de Mokee ROM 43.0 (Actualizada al dia 09/09/13)


https://mega.co.nz/#!twBDVb6D!N7fDlQ...bo2d7PkX6EHGKY



Última edición por eliherx Día 09/09/13 a las 00:48:43.
Responder Con Cita
Los siguientes 4 usuarios han agradecido a eliherx su comentario:
[ Mostrar/Ocultar listado de agradecimientos ]
  #169  
Viejo 08/09/13, 23:40:13
Array

[xs_avatar]
Dharma95 Dharma95 no está en línea
Vendedor verificado
· Votos compra/venta: (6)
 
Fecha de registro: ago 2011
Localización: Gipuzkoa
Mensajes: 2,046
Modelo de smartphone: Samsung Galaxy S25 Ultra
Tu operador: Vodafone
 Cita: Originalmente Escrito por eliherx Ver Mensaje
NIGHTLY de Mokee ROM 43.0 (Actualizada al dia 09/09/13)


http://old.androidfilehost.com/main/...48-NIGHTLY.zip (ENSEGUIDA LA SUBO A MEGA)


Muchas gracias por el curro, esperando el enlace a mega porque el otro tira muy lento...
Responder Con Cita
  #170  
Viejo 09/09/13, 00:53:03
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
Listo el enlace de MEGA de la ultima Nightly. Esto no para, ya se está cocinando la del dia 10
Responder Con Cita
Los siguientes 5 usuarios han agradecido a eliherx su comentario:
[ Mostrar/Ocultar listado de agradecimientos ]
  #171  
Viejo 09/09/13, 12:48:56
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
ilbando::silbando Si estos chinos no han hecho flasheadores compulsivos

Voy a hacer instalacion limpia de la release del dia 08/09 y luego la nightly del 09/09 pues en los foros chino martinz dice que no hace falta hacer wipes, probare a ver si no explota el movil




Os pongo unas capturas de atuntu antes de hacer la instalacion con el kernel que trae la rom, la verdad es que lo estan dejando fino, fino no hecho de menos el mackay Perfomance y cfq ............

Screenshot_2013-09-09-11-40-17.png Screenshot_2013-09-09-11-40-34.png

Última edición por segu42 Día 09/09/13 a las 13:24:57.
Responder Con Cita
Gracias de parte de:
  #172  
Viejo 09/09/13, 22:03:27
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
NIGHTLY de Mokee ROM 43.0 (Actualizada al dia 10/09/13)

https://mega.co.nz/#!1gpS3IpY!Q9BP5X...KoDr6FBC2vGhcw



Última edición por eliherx Día 10/09/13 a las 00:13:51.
Responder Con Cita
Los siguientes 5 usuarios han agradecido a eliherx su comentario:
[ Mostrar/Ocultar listado de agradecimientos ]
  #173  
Viejo 10/09/13, 02:10:36
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
Changelog 10/09

Mokee Open Source Changelog from 09/09/2013 - today
---------------------------------------------------------------

Project: kernel/lge/gproj
Ricardo Cerqueira - gpu: ion: Add ION compat ioctls to the CP heap
Ricardo Cerqueira - Revert "gpu: ion: Make secure buffers 1MB chunks"
Neeti Desai - msm: Add support for ION Flushing without virtual address
Ricardo Cerqueira - Revert "gpu: ion: Add extra metadata for secure buffers"
Ricardo Cerqueira - Revert "gpu: ion: Add support for securing indiviudal buffers"
Ricardo Cerqueira - gproj: gpu: ion: Restrict access to CP heap
Ajay Dudani - gpu: ion: Add null-pointer check after allocation
Praveen Chavan - gpu: ion: handle allocation error during heap protection in CP heap
Laura Abbott - gpu: ion: Add flag for forcing contiguous allocations
Laura Abbott - gpu: ion: Restrict access to CP heap
Ricardo Cerqueira - Revert "gpu: ion: Change secure heap allocation restrictions"
Huaibin Yang - msm_fb: display: restore previous mdp bandwidth when resume
Devin Kim - msm_fb: Fix display corruption with continuous splash screen feature
Ricardo Cerqueira - Revert "msm_fb: Correctly setup splash screen flag in MDP probe"

Project: kernel/google/msm
Steve Kondik - msm: Upgrade ION setup for Mako and Flo
Steve Kondik - msm: Fix warning about sparsemem during compilation
Steve Kondik - mako: Update bus topology for QSEECOM
Ricardo Cerqueira - Revert "Revert "msm: pm: Fix broken reg_val check""
Ricardo Cerqueira - msm: pm: Turn msm_init_pm back into a late initcall

Project: packages/apps/Mms
Danny Baumann - Cleanup: Remove variables that were never read.

Project: packages/apps/BluetoothExt
L谩szl贸 D谩vid - 32 bit int shifted by 36 bits at BluetoothMasObexServer.getUint32BigEndian

Project: device/lge/e975
Ricardo Cerqueira - Fix inclusion order
Ricardo Cerqueira - Add widevine DRM library
Ricardo Cerqueira - Split off common g-project elements to a shared repo
Ricardo Cerqueira - Add initlogo

Project: vendor/lge/e975
martincz - vendor update

Project: vendor/lge/p880
martincz - vendor update


Practicamente todas las novedades para el lge
Responder Con Cita
  #174  
Viejo 10/09/13, 02:30:42
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
Instalacion limpia

Bueno he hecho lo que comente unos post atras hice instalacion limpia de la rom quitando las apps del sistema que no me interesan, sonidos y poniendo los ficheros del gps que hay en la primera pagina. Todo funcionando sin ningun problema esa es la primera impresion. Instale las apps con el titanium le pase el atuntu y esta es la lectura que dio, con el kernel que trae sin añadir ningun otro (con perfomence y cfq).

Screenshot_2013-09-09-17-51-25.png Screenshot_2013-09-09-17-51-37.png

Luego instale la nightly del 09/09 quitando todo lo dicho anteriormente sin hacer los wipes y es verdad lo que dicen en los foros chinos ya hacen los wipes necesario, no tenemos que hacerlos nosotros antes de instalar la rom. y luego pase el atuntu y este es el resultado que dio(con perfomance y cfq y el kernel que trae):

Screenshot_2013-09-09-22-45-01.png Screenshot_2013-09-10-01-20-14.png

Conclusiones:

Se pueden hacer las instalaciones de las nightlys y release sin hacer wipes antes de instalar pues las rom ya los hacen por si solas. En anteriores instalaciones tenia el grenify y el advance mobile care para controlar la ram e hibernar las aplicaciones para ahorrar ram, ahora no las tengo instaladas y el móvil va ligero y rapido, creo que han hecho un buen trabajo en al racionalización de la ram pues va bastante fluida. Con niguna otra rom me ha dado lo que con esta el atuntu ( ya se que no es fiable 100%) pero al menos nos puede sevir de referencia.
Responder Con Cita
Los siguientes 2 usuarios han agradecido a segu42 su comentario:
  #175  
Viejo 10/09/13, 02:34:01
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
Tendremos que esperar a la siguientes a ver que novedades para nuestro LEGENDARIO Galaxy

Oye Segu42, tengo una duda, cuando instalo las actualizaciones metiendo wipe cache y wipe dalvik desaparece el bloqueo de pantalla deslizante, he tenido que aplicar todos los wipes, te ha pasado? Vi que posteaste que no se requieren los wipes según el foro chino, tendrá algo que ver?
Responder Con Cita
  #176  
Viejo 10/09/13, 02:40:22
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
 Cita: Originalmente Escrito por eliherx Ver Mensaje
Tendremos que esperar a la siguientes a ver que novedades para nuestro LEGENDARIO Galaxy

Oye Segu42, tengo una duda, cuando instalo las actualizaciones metiendo wipe cache y wipe dalvik desaparece el bloqueo de pantalla deslizante, he tenido que aplicar todos los wipes, te ha pasado? Vi que posteaste que no se requieren los wipes según el foro chino, tendrá algo que ver?
Pues no lo se cuando antes hacia los wipes antes de instalar no me desaparecia el bloqueo, solamente wipe cache y wipe dalvik pues el otro te resetea el sistema, ahora mismo estoy instalando la de hoy ya te comentare algo, por cierto lo de pasar de 5000 puntos en el atuntu me dejo algo perpejlo, ah y gracias por subir todos los días los enlaces a mega pues yo curro y no llego hasta la 1:00 a casa.
Responder Con Cita
  #177  
Viejo 10/09/13, 02:42:26
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
Terminada de instalar y funciona el desbloqueo deslizante sin problemas, y SI hace los wipes ella solita, instalada y a darle caña a ver como responde
Responder Con Cita
Gracias de parte de:
  #178  
Viejo 10/09/13, 02:47:01
Array

[xs_avatar]
eliherx eliherx no está en línea
Miembro del foro
 
Fecha de registro: ago 2013
Mensajes: 105
Modelo de smartphone: Meizu Mx4 & Le 2 Max
Tu operador: Movistar
 Cita: Originalmente Escrito por segu42 Ver Mensaje
Pues no lo se cuando antes hacia los wipes antes de instalar no me desaparecia el bloqueo, solamente wipe cache y wipe dalvik pues el otro te resetea el sistema, ahora mismo estoy instalando la de hoy ya te comentare algo, por cierto lo de pasar de 5000 puntos en el atuntu me dejo algo perpejlo, ah y gracias por subir todos los días los enlaces a mega pues yo curro y no llego hasta la 1:00 a casa.
Es una bomba esta rom, seguí los pasos de eliminar las aplicaciones desde el zip, quité otras 2 que en lo personal no me sirven, y he notado mucha fluidez, tengo unas 12 aplicaciones independientes a la rom y conservo un poco más de 100 de ram.

Agradezco tu ayuda, espero haya solución para no hacer todos los wipes.
Responder Con Cita
  #179  
Viejo 10/09/13, 03:13:51
Array

[xs_avatar]
segu42 segu42 no está en línea
Usuario muy activo
 
Fecha de registro: jun 2010
Localización: Gran Canaria
Mensajes: 876
Modelo de smartphone: oneplus 5t
Tu operador: Vodafone
Je, yo tengo 41 independientes reinstaladas por titanium backup
Responder Con Cita


  #180  
Viejo 10/09/13, 12:46:07
Array

[xs_avatar]
jalim23 jalim23 no está en línea
Usuario muy activo
 
Fecha de registro: nov 2010
Localización: Bilbao
Mensajes: 735
Modelo de smartphone: LG G2, SAMSUNG S4 MINI, GALAXY NOTE 8.0 Wifi
Tu operador: Euskaltel Móvil
Buenas,

Tengo una duda acerca de los Wipes, tengo la nightly del dia 3 de Septiembre metida con el kernel Mackay 0.502. Si quiero meter la ultima nightly tendría que hacer todos los wipes o no? Entre nightly y nightly se que no, pero al haber cambiador el kernel original a uno mackay pues me surge la duda....

Gracias de antemano.

Un saludo
Responder Con Cita
Respuesta

Estás aquí
Regresar   Portal | Indice > Foros Samsung > Otros smartphones de Samsung antiguos > Samsung Galaxy S I9000 > ROMs y desarrollo Samsung Galaxy S I9000



Hora actual: 20:50:27 (GMT +1)



User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.

Contactar por correo / Contact by mail / 邮件联系 /