Problema drivers SuperEclair

[HTCONE]

Hola compañeros, resulta que llevo varios dias probando esta magnifica Rom, y hasta ahora ningun problema, el tema es que ahora parece ser que mi pc no me reconoce mi magic y en modo flasbooth no puedo enviar acciones desde la ventana de comandos, anteriormente con la rom 1.6 no habia tenido ningun tipo de problema con los drivers...
Alguien podría ayudarme? saludos y gracias

[diegort]

No se si lo habras probado. Algunas veces hay que hacer un adb devices (o fastboot devices) para que te lo reconozca y puedas empezar a mandar comandos

[HTCONE]

 Cita: Originalmente Escrito por diegort

No se si lo habras probado. Algunas veces hay que hacer un adb devices (o fastboot devices) para que te lo reconozca y puedas empezar a mandar comandos

Gracias por tu respuesta, pero esto es lo que me aparece una vez que ejecuto "adb" en la ventana de comandos

 Cita:

-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP disconnect <host
>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] <file> - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.

adb help - show this help message
adb version - show version num

DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition

scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB adb
tcpip <port> - restarts the adbd daemon listening on TCP on the spec
ified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u
pdated.

- If it is "system" or "data", only the corresponding partition
is updated.

[blerfont]

Has verificado que dentro de Ajustes - Aplicaciones - Desarrollo - Depuración USB está habilitado?

despues de eso, y de haber verificado que en el administrador de dispositivos no tienes ningun dispositivo relacionado con el telefono aun sin instalar...

haciendo un "adb devices" deberia aparecerte tu terminal, y deberias poder funcionar sin problemas.

Un saludo