|
||
|
![]() |
![]() |
ROMs y desarrollo Huawei Ascend G300 ROMs y desarrollo Huawei Ascend G300 |
![]() |
|
Herramientas |
#1
|
||||
|
||||
Kernel 3.0.8 ICS código fuente
HUAWEI Ascend G300 Open Source(U8815,IcecreamSandwich,kernel-3.0.8)
2012-10-18|103.30MB http://www.huaweidevice.com/worldwid...oftid=NDY4NzQ= Description this kernel file is just for ROM developers and do not used to upgrade your moblie phone as the firmware,which may make your phone totally dead. Product:U8815 (ICS)/U8818 (ICS)/U8666E/U8666N el aviso en "chinglish" dice algo por el estilo de que se publica solo para desarolladores de ROMs y no debemos ponerlo como firmware porque podemos "matar completamente" al terminal.
__________________
"Había visto interacciones con el terminal curiosas: mirarle fíjamente, agitarlo, darle unos golpecitos en la parte superior para subir en el listado...¡pero nunca soplarle por el USB!" - escrito por [email protected]
![]() Última edición por KaterM Día 18/10/12 a las 16:23:49. |
|
#2
|
||||
|
||||
kernel compilado desde código fuente 100% funcional
en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!! [Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual. "What is it? This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800. I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom." ... Thanks to: Dazzozo and Fagulhas Omegamoon Geno Code Aurora Forum Cyda for Init.d support Fork Me: All my source is updated on GIT and I try to credit everything I do where needed. https://github.com/PaulMilbank/g300_kernel You can build this by using this guide: http://forum.xda-developers.com/show....php?t=1577876 I use ubuntu 12.04 LTS and build off the g300_defconfig. impresionante trabajo ![]()
__________________
"Había visto interacciones con el terminal curiosas: mirarle fíjamente, agitarlo, darle unos golpecitos en la parte superior para subir en el listado...¡pero nunca soplarle por el USB!" - escrito por [email protected]
![]() |
#3
|
||||
|
||||
en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!! [Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual. "What is it? This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800. I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom." ... Thanks to: Dazzozo and Fagulhas Omegamoon Geno Code Aurora Forum Cyda for Init.d support Fork Me: All my source is updated on GIT and I try to credit everything I do where needed. https://github.com/PaulMilbank/g300_kernel You can build this by using this guide: http://forum.xda-developers.com/show....php?t=1577876 I use ubuntu 12.04 LTS and build off the g300_defconfig. impresionante trabajo ![]() ![]() |
Gracias de parte de: | ||
#4
|
||||
|
||||
Una pregunta tonta, este kernel tiene la función NFC implementada, o es un modulo aparte
Enviado desde mi HUAWEI U8815N usando Tapatalk 2 |
#5
|
||||
|
||||
Compañeros con este kernel, no habéis percatado de un rendimiento menor en juegos o es mi sensación???
Sent from my HUAWEI U8815 using Tapatalk 2 Última edición por J.S Día 13/11/12 a las 12:45:40. |
#6
|
||||
|
||||
Yo lo probe en la B940, llevaba 5 min usándolo y se me reinicio navegando por internet, primera vez que se me reinicia solo el cel, decide probarlo un poco mas de tiempo pero al hacer un test con antutu se me volvio a reiniciar, asi que finalmente volvi a un backup anterior. En el hilo de modacco lei muy buenos comentarios, pero en mi caso funciono bastante mal
![]() |
#7
|
||||
|
||||
en MoDaCo ha salido el nuevo kernel del miembro "PaulMilbank" que se puede flashear encima de cualquier ROM basada en Huawei stock ICS (p.e. B926 hasta B944, Infusion etc.)
NO sirve para CM9 o CM10 !!! [Kernel] 308 Kernel for official ICS roms, #19 update 11/11/12 Está incluido en la B944 Stock + ROM de "Cyda"en la versión actual. "What is it? This is a kernel I have been working on for fun when I have time. It uses some commits from Daz and his ICS/JB kernel, Quite a few commits from Code Aurora Forum and a bit from Omegamoon and Geno. I have Also recycled some code from my previous 308 kernel for the Huawei X5/u8800. I used the 3.08 kernel source from Huawei as a base and pulled the boot.img and config from my stock b936 vodafone NZ rom." ... Thanks to: Dazzozo and Fagulhas Omegamoon Geno Code Aurora Forum Cyda for Init.d support Fork Me: All my source is updated on GIT and I try to credit everything I do where needed. https://github.com/PaulMilbank/g300_kernel You can build this by using this guide: http://forum.xda-developers.com/show....php?t=1577876 I use ubuntu 12.04 LTS and build off the g300_defconfig. impresionante trabajo ![]() ![]() Saludos |
![]() |
![]() |
||||||
|