 |
|
||
|
|
|
|||||||
| Elephone P9000 Elephone P9000 |
 |
|
|
Herramientas |
|
#41
14/03/16, 20:15:47
|
||||
|
||||
 Cita: Originalmente Escrito por Rukia_ct
bueno, ya lo recuperé!
 Enviado desde mi Elephone P8000 mediante Tapatalk 
|
|
|
|
#42
14/03/16, 20:45:18
|
||||
|
||||
|
Cita: Originalmente Escrito por Ashrapi
Enhorabuena! Tu experiencia con la actualización OTA fallida nos sirve a los que lo estamos esperando... Hasta que no haya más gente trasteándolo, nanai de actualizaciones OTA....
Enviado desde mi Elephone P8000 mediante Tapatalk Si, es para pensarselo, pero el caso es que son necesarias ya que las 2 primeras mejoran bastante la camara, entre otras cosas.
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#43
14/03/16, 21:37:14
|
||||
|
||||
 Bufffff, me alegro por ti Rukia_ct.Lo bueno sería saber que hizo tu amigo, por si nos pasa a los demás. Pero seguramente lo tenga clasificado como "secreto profesional". Salu2.
|
|
#44
14/03/16, 23:25:27
|
||||
|
||||
|
Cita: Originalmente Escrito por jupiters
Bufffff, me alegro por ti Rukia_ct. Lo bueno sería saber que hizo tu amigo, por si nos pasa a los demás. Pero seguramente lo tenga clasificado como "secreto profesional". Salu2. 
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#45
14/03/16, 23:30:32
|
||||
|
||||
|
Ahora el ordenador me lo reconoce sin problemas. Antes me lo reconocía y al poco se desconectaba solo. Lo mismo desde un principio había algo que no funcionaba bien en el movil y al reinstalarlo todo desde 0 ya va mejor...
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#46
15/03/16, 06:46:47
|
||||
|
||||
|
Cita: Originalmente Escrito por Rukia_ct
Ahora el ordenador me lo reconoce sin problemas. Antes me lo reconocía y al poco se desconectaba solo. Lo mismo desde un principio había algo que no funcionaba bien en el movil y al reinstalarlo todo desde 0 ya va mejor...
|
| Gracias de parte de: | ||
|
#47
16/03/16, 13:25:55
|
||||
|
||||
|
Para hacer root:
http://bbs.elephone.hk/thread-9919-1...l#.VulOVvnlGO4
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#48
04/04/16, 22:58:25
|
||||
|
||||
|
Hola a todos, yo os explico mi experiencia.
No he conseguido instalar los drivers en w10 y lo he tenido que hacer en el curro sobre w7. Entonces a la primera, eso si, va preguntando por certificados sin poder validar, etc... Pero dando a instalar a todo lo he conseguido. Luego meter por flash tool la room ha sido coser y cantar. Todo ok pero eso si, instalación limpia y todo lo instalado anteriormente al carajo. @Rukia_ct tu has conseguido instalar el twrp al final? Y si es así, como meter la room de elephone por ahí? Gracias. PD: tema batería horrible, ya abriremos un hilo expreso para ello porque se merece uno propio.
__________________
Anda !!!
Como el iphone !!! 
|
|
#49
04/04/16, 23:08:33
|
||||
|
||||
|
Por cierto, a mi me llego el terminal con la caja abierta y al encender no me pidió ni idioma ni nada, o sea que lo habían trasteado. Al intentar entrar en el recovery, me sale el muñeco de Android tumbado con un signo de admiración encima. Alguien sabe lo que significa?
Muchas gracias. @jupiters: gracias por el hilo!
__________________
Anda !!!
Como el iphone !!!
|
|
#50
04/04/16, 23:34:46
|
||||
|
||||
|
Cita: Originalmente Escrito por xhoyos
Por cierto, a mi me llego el terminal con la caja abierta y al encender no me pidió ni idioma ni nada, o sea que lo habían trasteado. Al intentar entrar en el recovery, me sale el muñeco de Android tumbado con un signo de admiración encima. Alguien sabe lo que significa?
Muchas gracias. @jupiters: gracias por el hilo!   El muñeco tumbado es una presentación previa del modo recovery.Si pulsas Power, Volumen + ó Volumen -, debería entrar en el recovery. Yo no tengo el P9000, pero en otro móviles funciona así.
|
|
#51
04/04/16, 23:52:05
|
||||
|
||||
|
Cita: Originalmente Escrito por jupiters
De nada compi.
El muñeco tumbado es una presentación previa del modo recovery.Si pulsas Power, Volumen + ó Volumen -, debería entrar en el recovery. Yo no tengo el P9000, pero en otro móviles funciona así. Gracias colega!
__________________
Anda !!!
Como el iphone !!!
Última edición por xhoyos Día 05/04/16 a las 23:31:13.
|
|
#52
05/04/16, 00:09:18
|
||||
|
||||
|
Somos ya unos cuantos a los que les ha llegado el terminal ya abierto...
Yo tampoco he podido entrar nunca en el recovery stock del movil. Yo ahora uso otro ordenador para toquetear el movil, uso el de mi hermano ya que con el mio no podía usar bien el flashtool. Xhoyos, yo para actualizar me lo corgé todo con el flashtool, instalé desde cero la 03/15, y una ver instalada pues volví a ponerle el twrp y el root. Y la verdad es que lo de la batería tienen que mejorarlo ya.
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#54
05/04/16, 22:58:04
|
||||
|
||||
|
Hola, aquí os dejo un tutorial de como instalar los drivers en Windows 10 para certificados que no se puede comprobar la firma, o sea los que necesitamos para nuestro P9000
Es la única forma que he conseguido instalarlos.
__________________
Anda !!!
Como el iphone !!!
|
| Gracias de parte de: | ||
|
#55
05/04/16, 23:00:19
|
||||
|
||||
|
Cita: Originalmente Escrito por Rukia_ct
Somos ya unos cuantos a los que les ha llegado el terminal ya abierto...
Yo tampoco he podido entrar nunca en el recovery stock del movil. Yo ahora uso otro ordenador para toquetear el movil, uso el de mi hermano ya que con el mio no podía usar bien el flashtool. Xhoyos, yo para actualizar me lo corgé todo con el flashtool, instalé desde cero la 03/15, y una ver instalada pues volví a ponerle el twrp y el root. Y la verdad es que lo de la batería tienen que mejorarlo ya.
__________________
Anda !!!
Como el iphone !!!
|
| Gracias de parte de: | ||
|
#56
05/04/16, 23:32:43
|
||||
|
||||
|
Cita: Originalmente Escrito por xhoyos
Prueba el tutorial que he colgado para los drivers a ver que tal.
De todas formas creo que voy a formatear mi ordenador, ya le va tocando, y volveré a probar.
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
|
#57
13/04/16, 14:16:12
|
||||
|
||||
|
TIPOS DE ERRORES Y SU POSIBLE SOLUCIÓN (in English pleaseeee
 jeje)Phone is totally dead Message: Phone no longer responds to power button Solution: Follow this guide @ http://forum.hovatek.com/thread-286.html Phone still not working after flashing Message: Phone still stuck at Bootlogo or Bootloop Solution: * Ensure there's a formatted SD card in the phone before flashing * Give up to 5 minutes because first boot takes time * Boot the phone into recovery mode then wipe data / factory reset * Remove the battery for 30 seconds then slot back in * Try a firmware upgrade . use MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup * Try a firmware / ROM from another source Phone shows white screen, strange colors or divided screen after flashing Message: You can see the phone responding to buttons and making sound but all is blurred by white screen * Solution: The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img , logo.bin and uboot.bin / lk.bin ) Phone automatically disconnecting during flashing Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process Solution: * Try a different USB cord, USB port & PC * Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing * Launch Device manager (Right-click My Computer > Select Manage) * Connect the phone to the PC via a USB cord, Device manager should refresh * Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices) * Right-click whatever the phone is detect as and select Update Driver Software... * Select Browse my computer for driver software * Select Let me pick from a list of device drivers on my computer * Click Next * Click Have Disk * Proceed with the Mediatek (VCOM) driver installation steps described at https://forum.hovatek.com/thread-440.html and click Yes if you get an Update Driver warning Sp Flash tool remains at 0% Message: Phone only shows charging sign Meaning: Necessary drivers have not been successfully installed on the PC Solution: * Follow this guide @ http://forum.hovatek.com/thread-440.html to manually install vcom drivers Error 5054 Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to Solution: * Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again Initialize scatter failed Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal Meaning: SP Flash tool doesn't accept the name format of your scatter file Solution: * Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool Error 8038 Message: Error 8038! Android download pmt is ready and layout has been changed Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility Solution: * Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download * If Download doesnt work then do a firmware upgrade * If the MTK backup contains more than one scatter file, retry flashing with the other scatter file. * If that isn't feasible, try formatting first or use firmware upgrade * If that doesn't work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" . Error 4032 Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings Solution: * Ensure that the file(s) you're trying to flash are actually for your exact phone model * Ensure you tick the boxes for only the files present in the ROM you're about to flash * Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html * Delete the sp flash tool folder then re-extract * Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing. * If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase). * Consider using the latest version of Sp Flash tool * Format the phone before trying to flash the file(s) again Error 5056 Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069) Meaning: The size of a file is larger than the available / possible partition size Solution: * Ensure that the file(s) you're trying to flash are actually for your exact phone model * Try another stock ROM Error 4001 Message: S_FT_DA_NO_RESPONSE or Meaning: SP flash tool is having difficulty communicating with the device Solution: * Change the USB-port * Run SP flash tool as Admin * Ensure to install the correct drivers (see https://forum.hovatek.com/thread-440.html ) * Try another PC and USB cord * Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing Sp flash tool was successful but phone's calibration doesn't work Message: Soft keys and touch screen don't work / respond Solution: * Edit the scatter file using Notepad++ and remove NODL__ (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way, these items will become listed when next you load the scatter file (after saving of course) and therefore flashable Error 4008 Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) Meaning: SP Flash tool encountered an error while attempting to flash files Solution: * Ensure the battery is in the phone and the phone is switched off before connecting for flashing * Try using a higher version of SP flash tool * Change the USB cord and port or PC * Use the format option then download in SP flash tool Error 3149 Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149) Meaning: SP Flash tool was unable to flash files to the phone Solution: * Ensure to run the latest version of SP flash tool as Administrator * Format first then Download * Don't tick a box with an unspecified / empty file path * Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing * Try a different PC * Try a different ROM * Try a different USB cord * Try formatting the phone first before flashing files to it Error 3168 Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168) Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info. Solution: * Ensure you're using the ROM for the exact phone model * Try a higher version of SP flash tool * Ensure to install the correct drivers for the phone on the PC Error 2004 Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004) Meaning: There was an interruption in the communication between SP flash tool and the device Solution: * Try using a different USB cord, port and PC * Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator * Try a different USB cord * Try a different port on the PC or another PC * Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing USB device not recognized Message: USB device not recognized prompt at system tray after connecting the phone to PC Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems) Solution: * Follow the guide @ https://forum.hovatek.com/thread-808.html * Try a different USB cord, PC port or PC Error 1013 Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013) Meaning: SP flash tool encountered an error while attempting to communicate with the phone via the target port Solution: * Try using a different port on the PC * Try a different version of SP flash tool * Install VCOM drivers using https://forum.hovatek.com/thread-440.html * Ensure the phone is switched off with battery inside before connecting to the PC for flashing * Try using a different PC * Try changing the USB cord * Ensure the phone's USB port isn't damaged Error 2020 Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020) Meaning: SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM Solution: * Use the latest version of SP flash tool * In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery". * Use the Format all + Download option * Hold both volume buttons before connecting to the PC for flashing and release once flashing begins Error 5007 Message: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) Meaning: You're trying to flash an item with an unspecified path (no file selected for the ticked item/box) Solution: * Ensure the scatter file is in the same directory as the other file(s) to be flashed * Untick any item whose file you do not have or whose path is not specified; yet, is ticked / selected for flashing Error 4010 Message: BROM ERROR : S_FT_FORMAT_FAIL Meaning: The blocks map in the scatter file doesn't match the phone's partition sizes Solution: * Try using the latest version of Sp flash tool * Try using another firmware for the exact phone model Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182) Meaning: The ROM your're trying to flash is not compatible with the target device Solution: * Download the ROM for the exact phone model you're trying to flash * Ensure to install VCOM drivers on the PC * Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded. Error 6012 Message: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00 Meaning: The Download-Agent being used is incompatible with the phone Solution: * Set Download-Agent to MTK_AllInOne_DA.bin Error 1042 Message: BROM ERROR: S_TIMEOUT (1042) Meaning: The flashing process took too long so SP flash tool encountered a timeout Solution: * Try flashing one file at a time * Use the latest version of SP flash tool * Try using a different PC and USB cord * Try Infinix Flash tool @ https://forum.hovatek.com/thread-9224.html Error 2 Message: BROM ERROR: ?? (2) Meaning: SP Flash tool was unable to communicate with the phone Solution: * Try using a different PC (preferably Windows 7 or lower) * Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit) * Try another USB cord Error 2005 Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) Meaning: The device attempted to power on before SP flash tool could flash files to it Solution: * Try using a different USB cord, port and PC * Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator * Try a different USB cord * Try a different port on the PC or another PC * Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing Error 4058 Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058) Meaning: SP flash tool was unable to locate the partition you're trying to flash to Solution: * Untick any item (box) with a blank or empty Location Error 3178 Message: BROM_ERROR_S_STORAGE_NOT_MATCH (3178) Meaning: The firmware you are trying to flash isnt compatible with your phone Solution: Try flashing another firmware for your exact phone model / variant Error 8406 Message: SP FLASH TOOL ERROR (8406) Meaning: There is some compatibility problem interrupting the flashing process Solution * Try flashing another firmware for your exact model * Update VCOM drivers for the device under Device manager Error 1012 Message: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012) Meaning: The version of SP flash tool you're using doesn't support the size(s) of the file(s) in the firmware / stock ROM. Solution * Use the latest version of SP flash tool Error 3140 Message: BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED Meaning: SP flash tool encountered an error flashing a selected file to a non-specified partition Solution: * Try using the latest version of SP flash tool * Use the format option then download in SP flash tool Error 8417 Message: BROM ERROR: Initialize scatter file failed. Please check the scatter file name you load is legal Meaning: The format of the scatter file is invalid Solution: Open the scatter file in Notepad++, the first line must begining with: ################################################## ################################################## ########## General Setting # If there is anything else above this then delete it and save the scatter file Error 6047 Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL Meaning: Hash (integrity) check of the images being flashed failed. Solution * Use SP Flash Tool V5.1516.00 @ http://adf.ly/1ZI3Ym * Ensure to select the right Download-Agent * Navigate to Options > Option > Download and untick DA DLL All.....
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
| Gracias de parte de: | ||
|
#59
16/04/16, 13:29:09
|
||||
|
||||
|
Bueno, ya instalé el twrp con el flashtool y ya está roteado con la versión20160401.
Lo que no consigo instalar es el xposed framework
__________________
"Si supiera que el mundo se acaba mañana, yo, hoy todavía, plantaría un árbol"
— Martin Luther King
|
| Gracias de parte de: | ||
|
|
|
Estás aquí
|
||||||
|
||||||
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/unknown.gif)
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar215956_10.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar286980_1.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar633844_1.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar1305011_1.gif){kind=avatar}