[KERNEL] [4.3/4,4][Linaro 4.8.2 ]( (( NEO * 017 )) )[ 16-11-2013 ] Kit Kat ]

[MementoMoriM]

 Cita: Originalmente Escrito por pelucaslee

A mí tampoco me funciona, yo tengo chip nominal y tú?
Esto es con la 002 que es test.
Un saludo.

Sino os funciona meted la 001 que la 002 es un test.

También si tenéis una aplicación que gobierne el kernel borrad datos y forzad detención.

[pelucaslee]

 Cita: Originalmente Escrito por MementoMoriM

Sino os funciona meted la 001 que la 002 es un test.

También si tenéis una aplicación que gobierne el kernel borrad datos y forzad detención.

Ya lo había desinstalado.
Era por probar el kernel. Cuando saque la 002 estable la probaré, de momento estoy muy contento con el último matrix.
Un saludo.

[MementoMoriM]

Change Log:
************************
* 2013-08-25 : Neo-002 *
************************
- Based on Neo-001
- Default setting tuning ( user can change it using TricksterMod)
- defconfig: Use XZ compression instead GZIP to reduce kernel size.
- mach-msm: Increase low GPU BW to 133 MHz from 80 MHz.
- acpuclock-krait: Increase max HFPLL VDD to 1350000 from 1200000 voltage.
- ramdisk: create ramdisk with grant root (by Semaphore, for ramdisk version)
- auto_hotplug: Force offline cpu 1,2 & 3 during suspend mode to save battery usage.
- auto_hotplug: limit suspend cpu0 freq to 192 - 1026 MHz and restore when wakeup.

Download: https://drive.google.com/folderview?...28&usp=sharing
Latest: Neo-002
Note:
- Neo-xxx.zip is kernel+ramdisk
- Neo-xxx-ANY.zip is kernel only, better to flash stock kernel first ( use this if have problem)

[MementoMoriM]

Neo-002.1 is up

************************
* 2013-08-25 : Neo-002.1 *
************************
- Based on Neo-002
- auto_hotplug: Fix screen cannot resume after suspend.

https://drive.google.com/folderview?...28&usp=sharing

[illanxr]

Muy parado está esto... he de decir que este kernel es una auténtica pasada con la PSX v4.1. Venía del Matrix (en el que está basado) y este lo supera: me da mejor rendimiento (tanto en juegos como sensación global de fluidez) con (incluso) algo más de batería

Alucinante

[MementoMoriM]

************************
* 2013-08-26 : Neo-002.2 *
************************
- Based on Neo-002.1
- auto_hotplug: Fix screen cannot resume after suspend - Fix2.
- cpuclock: tweak hfpll & cpu core voltage.

https://drive.google.com/folderview?...28&usp=sharing

[MementoMoriM]

 Cita: Originalmente Escrito por illanxr

Muy parado está esto... he de decir que este kernel es una auténtica pasada con la PSX v4.1. Venía del Matrix (en el que está basado) y este lo supera: me da mejor rendimiento (tanto en juegos como sensación global de fluidez) con (incluso) algo más de batería

Alucinante

Buenas, ¿ qué versión le metistes? ¿la ANY con ramdisk o la normal?

Saludos!


PD ya hay versión 002.2 :sly:

[illanxr]

 Cita: Originalmente Escrito por MementoMoriM

Buenas, ¿ qué versión le metistes? ¿la ANY con ramdisk o la normal?

Saludos!


PD ya hay versión 002.2 :sly:

Le había puesto la 002.1 normal (no la ANY). Habrá que probar la nueva

[MementoMoriM]

************************
* 2013-08-26 : Neo-002.3 *
************************
- Based on Neo-002.2
- auto_hotplug: Fix enable/disable flag.
- sound/soc/codecs/wcd9310.c: expose additional controls
- cpuclock: tweak oc core voltage.
- sound control 3.x: Initial GPL release for WCD9310 Audio Codec
- auto_hotplug: disable debug kernel print info.


https://drive.google.com/folderview?...28&usp=sharing

[tornado76]

La nueva base de la PSX v4.1 es JSS15Q por lo tanto este kernel sirve para la JSS15??
La verdad lo vengo siguiendo y tiene una pintra tremenda y segun los comentarios con resultados muy buenos verdad .
Saludos

[MementoMoriM]

 Cita: Originalmente Escrito por tornado76

La nueva base de la PSX v4.1 es JSS15Q por lo tanto este kernel sirve para la JSS15??
La verdad lo vengo siguiendo y tiene una pintra tremenda y segun los comentarios con resultados muy buenos verdad .
Saludos

Yo diría que si, ya que ramgear creador del kernel lo lleva con la psx

Saludos!

[tornado76]

Pues aqui estoy
De bateria es pronto para decir nada, ya veremos!!
Saludos

[sergiomontcada]

lo acabo de probar con la rom CyanKang y no consigo q furule

[MementoMoriM]

Neo-003 is up


************************
* 2013-08-27 : Neo-003 *
************************
- Based on Neo-002.3
- auto_hotplug: tweak nr calculation and set max suspend cpu freq to 702MHz
- auto_hotplug: add fix sampling rate to avoid dynamic change using number of online cores
- auto_hotplug: Fix initial min sampling rate value.
- Use custom toolchain built on Ubuntu 13.04 64 bit with default configuration.


https://drive.google.com/folderview?...28&usp=sharing

[MementoMoriM]

Neo-004 is up

************************
* 2013-08-28 : Neo-004 *
************************
- Based on Neo-003
- mach-msm: Tweak GPU BW
- modules: bypass vermagic check for TouchControl module.
- module: also bypass bad_version check.
- defconfig: Enable Touch Control required flag.
- defconfig: Default CFQ IO Scheduler
- auto_hotplug: add tunable threshold
- readahead: tweak max vm

[MementoMoriM]

Neo-005 is up.

Will update change log later.

Fyi, TC not reduce performance, using it to wake my phone. 

[MementoMoriM]

Change Log:
************************
* 2013-09-3 : Neo-007 *
************************
- mm: Increase vm min readahead
- int_sqrt.c: Correction square root algo with naming
- lib: Use glibc instead arch lib.
- Makefile: Use cortext-a9 compile cpu flag
- mach-msm: subsystem_restart: Fix CPU detection - Thank Stratos
- acpuclock-8064: Adjust L2 vdd and cpu uv boost
- kgsl_pwrscale_trustzone: Tweak simple gov average idle time
- defconfig: Disable Ultimate CPU OC (1.9 - 2.0 MHz)

************************
* 2013-09-1 : Neo-006 *
************************
- Remove some debugging
- sweep2wake: Use POWER_SLEEP on suspend and POWER_WAKE on resume.
- kgsl: Not change to low power on performance
- regulator: Limit minimum voltage to 700mV
- auto_hotplug: Replace fix sampling rate option with scalar scale option
- regulator: Tweak voltage and bring back cpu freq 387MHz
- auto_hotplug: Delay at least min sampling rate when enable.
- BLX: Set default limit to 98
- mach-msm: Allow CPU Overclock up to 2.052 GHz
- mach-msm: Use switch to enable/disable GPU 533MHz (diabled)
- mach-msm: Increase CPU BW level

https://drive.google.com/folderview?...28&usp=sharing

[MementoMoriM]

NEO 009 https://drive.google.com/folderview?...28&usp=sharing

************************
* 2013-09-6 : Neo-009 *
************************
- Based on Neo-008
- smp: patches from mainline 3.5 to hopefully help with hotplug efficiency
- Make sure PWMs are running in sync.
- Sweep2Wake: Loop until i2c is awake (Thank myfluxi)
- msm_fb: Set timeline threshold for command mode to 2
- msm: mdp: Do not wait for vsync for command mode panel
- msm_fb: display: add mfd null pointer and mfd panel_power_on checks
- msm_fb: display: fix the hang issue caused by solidfill pipe
- video: msm: external: Limit HDMI to standard resolutions
- remove compilation error by changing int to uint32_t
- msm_fb: hdmi: Resolution modes on HDMI
- msm: move printk out of spin lock low_water_lock
- sched: change WARN_ON_ONCE to WARN_ON in try_to_wake_up_local()
- sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
- sched: Make sure to not re-read variables after validation
- sched: re-calculate a cpu's next_balance point upon sched domain changes
- sched: fix reference to wrong cfs_rq
- sched: Fix SCHED_HRTICK bug leading to late preemption of tasks
- sched: Reset rq->next_interval before going idle
- hrtimer: Prevent hrtimer_enqueue_reprogram race
- msm: msm_bus: Correct the return value from register-client
- msm: msm_bus: Explicitly clear client requests before removal
- msm: msm_bus: Add NULL pointer checks.
- msm: msm_bus: Change MDP port interleaved setting
- msm: msm_bus: Fix the 64-bit division during interleaving
- Revert "msm: kgsl: use kgsl_mmu_device_setstate() if the GPU is already idle"
- Revert "msm: kgsl: implement server-side waits"
- Revert "lib: Update RWSEM to Linux 3.10"

************************
* 2013-09-4 : Neo-008 *
************************
- Based on Neo-007
- string: Use memchr from glibc
- int_sqrt: Improve 3x faster integer sqrt.
- auto_hotplug: Add min/max cpu freq setting during screen off (default 192/702MHz).
- mach-msm: Decrease CPU BW level
- defconfig: Enable Ultimate CPU OC (1.9 - 2.0 MHz)

[MementoMoriM]

************************
* 2013-09-10 : Neo-010 *
************************
- Based on Neo-009
- sweep2wake: Fix touch screen not response after reboot.
- IO Control: Read ahead 512 and Row scheduler by default.
- auto_hotplug: Tweak
- Always POWER_OFF on suspend and POWER_ON on resume
- deadline: Allow 0ms deadline latency, increase the read speed
- Async I/O latency to a ssd greatly increased, 34% gain (Creds: kleikamp)
- block: deadline: hardcode magic values from the usual suspects
- lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
- lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'
- vsprintf: correctly handle width when '#' flag used in %#p format
- vsprintf: further optimize decimal conversion
- vsprintf: add %pMR for Bluetooth MAC address
- lib/vsprintf.c: remind people to update Documentation/printk-formats.txt when adding printk formats
- lib/vsprintf.c: kptr_restrict: fix pK-error in SysRq show-all-timers(Q)
- vsprintf: add support of '%*ph[CDN]'
- lib: vsprintf: optimize division by 10 for small integers
- lib: vsprintf: optimize division by 10000
- lib: vsprintf: optimize put_dec_trunc8()
- lib: vsprintf: fix broken comments
- lib/vsprintf: update documentation to cover all of %p[Mm][FR]
- lib/vsprintf.c: improve standard conformance of sscanf()
- scatterlist: add sg_alloc_table_from_pages function
- scatterlist: atomic sg_mapping_iter() no longer needs disabled IRQs
- tmpfs: fix mempolicy object leaks
- Staging: android: binder: Fix memory leak on thread/process exit
- Makefile: Fix sizeof pointer memaccess warning.
- GPU Freq boost on touch (default 2 step, 320MHz)
- defconfig: Enable extra GPU OC up to 533 MHz
- block/deadline-iosched: Tweak magic value
- prima: release v3.2.2.17b
- acpuclock-krait: Report PVS Bin as readable text.
- msm: mdp: Adjust bandwidth parameters
- msm: video: increase MM heap size for smoothstreaming
- msm: mdp: Unmap secure memory on dtv off

https://drive.google.com/folderview?...28&usp=sharing

[MementoMoriM]

Neo-011 JSS/JWR is up.

************************
* 2013-09-15 : Neo-011 *
************************
- Based on Neo-010
- JSS/JWR build support
- Performance tweak.
- Fix GPU Boost logic checking
- mach-msm: Reduce Max BW to 533MHz
- sweep2wake: Fix off status checking
- cpuidle: many update commit
- cpufreq: ondemand:: many update commit