 |
|
||
|
#201
12/02/14, 22:30:09
|
||||
|
||||
 Cita: Originalmente Escrito por starsy
Yo le meti un paquete minimo de gaps, este
http://goo.im/devs/BaNkS/GApps/4.4.2...4.2_signed.zip Seria posible que en alguna proxima version se pueda hacer que el reproductor de serie, el poweramp o cualquier otro, pueda mostrar la tarjeta externa? es que ahora mismo no la muestra y es cosa de la rom porque en otras JB 0 ICS si que la mostraban sin problemas  
|
| Gracias de parte de: | ||
|
|
|
#202
13/02/14, 19:05:01
|
||||
|
||||
|
Instalada y probada, todo OK
Va super fluida, muy fluida, posiblemente una de las que más fluida valla , paso a comentar una serie de cosas x si tienen solucion que desconozco o que no encontrara,hecho en falta: modo dark (modo oscuro en iconos, teclado y demás...) accesos directos en la parte baja del panel de notificacioness o en el panel de ajustes rapidos , que se le puede poner una aplicacion que tu quieras ( estoy acostumbrado a ellos vengo de la 4.2.2 liquismooth con angela kernel), hecho en falta la rotación automática solo con el teclado activado y que el teclado no ocupe toda la pantalla y sobre todo lo que mas hecho en falta es la posibilidad de poner la barra de notificaciones en transparente y que se oculte automáticamente, esto ultimo la verdad q me encanta de otras ROMs. Por lo demás va de fábula , ligera y muy muy fluida. Felicidades al cocinero 
|
|
#203
13/02/14, 19:17:57
|
||||
|
||||
|
Cita: Originalmente Escrito por ivangv83
Instalada y probada, todo OK
Va super fluida, muy fluida, posiblemente una de las que más fluida valla , paso a comentar una serie de cosas x si tienen solucion que desconozco o que no encontrara,hecho en falta: modo dark (modo oscuro en iconos, teclado y demás...) accesos directos en la parte baja del panel de notificacioness o en el panel de ajustes rapidos , que se le puede poner una aplicacion que tu quieras ( estoy acostumbrado a ellos vengo de la 4.2.2 liquismooth con angela kernel), hecho en falta la rotación automática solo con el teclado activado y que el teclado no ocupe toda la pantalla y sobre todo lo que mas hecho en falta es la posibilidad de poner la barra de notificaciones en transparente y que se oculte automáticamente, esto ultimo la verdad q me encanta de otras ROMs. Por lo demás va de fábula , ligera y muy muy fluida. Felicidades al cocinero
|
| Gracias de parte de: | ||
|
#204
13/02/14, 19:38:26
|
||||
|
||||
|
Cita: Originalmente Escrito por JohnMcClane1
no se si en esta rom es igual que la de cyanogenmod 11 pero si editas con un explorador root el archivo que esta en system/ build.prop hay una linea que pone ro.config.low.ram=true..pues cambias true por false y la barra de notificaciones se pone transparente.
|
|
#205
14/02/14, 17:51:51
|
||||
|
||||
|
Nueva elease 14/02
Nueva release de este magnifico proyecto o dejo el changelog, he corregido los enlaces de la primera pagina para que funcionen y redirecionen bien, un saludo:
MoKee OpenSource Changelog from 02/12/2014 - 02/13/2014 --------------------------------------------------------------- Project: kernel/lge/hammerhead myfluxi - ARM/dt: hammerhead: Reduce minimum panel brightness myfluxi - ARM/dt: msm8974-gpu: Enable qcom bus-control myfluxi - PM: devfreq: Fix simple_ondemand crashing on startup Syed Rameez Mustafa - sched: convert WARN_ON() to printk_sched() in try_to_wake_up_local() Konstantin Dorfman - mmc: queue: do not clean current request when urgent in progress Tatyana Brokhman - block: do not notify urgent request, when flush with data in flight Project: kernel/samsung/d2 ajrty33 - d2: pulse the led Project: kernel/samsung/aries Pawit Pornkitprasan - Revert "s3cfb: tl2796: do not read calibration data on aries" Project: kernel/samsung/smdk4412 sbrissen - smdk4412: update fimc_capture and sr130pc20 cam driver Project: kernel/motorola/msm8226 dhacker29 - defconfig: Update Asutosh Das - fat: limit the number of error prints Abhinay Reddy Vanipally - Revert "mmc: core: do not reinsert prepeared FUA and FLUSH requests in stop flow". Anirudh Ghayal - drivers: qpnp-bms: Use disable_irq_nosync() in IRQ context Shruthi Krishna - Revert "mmc: sdhci: retune on cmd or data CRC error" Girish Mahadevan - msm: msm_bus: Modify IB aggregation at master Vijayavardhan Vennapusa - USB: dwc3-msm: Fix USB connection issue after DCP charger disconnection Gilad Avidov - i2c_qup: Improve implementation of PM callbacks Manu Gautam - USB: gadget: qdss: Flush pending works before function unbind Himanshu Aggarwal - ARM: dts: msm: Update config data of Atmel for 8x10 MTP Lior Barenboim - msm: ultrasound: Add support for general button events Xiaozhe Shi - power: qpnp-charger: disable ibat_loop when temperature is out of range Xiaozhe Shi - power: qpnp-bms: calibrate iadc using correct batfet settings Adrian Salido-Moreno - msm: mdss: initialize write back arguments in kickoff Adrian Salido-Moreno - msm: mdss: allow re-queue of writeback buffers Rohit Vaswani - msm: gpiomux: Add msm_tlmm_misc_reg_read API Banajit Goswami - ASoC: msm: qdsp6v2: disable OCMEM by default Todd Poynor - ashmem: avoid deadlock between read and mmap calls Shankar Brahadeeswaran - staging: android: ashmem: get_name,set_name not to hold ashmem_mutex dhacker29 - Revert "ashmem: avoid deadlock between read and mmap calls" Girish Mahadevan - ARM: dts: Reintroduce dual config for CPU on msm8974 Hariprasad Dhalinarasimha - kernel/msm: Add qrngp header file Wesley Cheng - USB: dwc3_msm: Disable all events before error recovery for Erratic event Shrenuj Bansal - msm: kgsl: Remove cpu_is_msm8960() check Shrenuj Bansal - msm: kgsl: Add arch_mmap_check() stub definition David Keitel - power: qpnp-charger: add vbatdet-maxerr-mv option Ken Zhang - msm: display: hdmi: vic search Al Viro - arm: new way of handling ERESTART_RESTARTBLOCK Al Viro - arm: if there's no handler we need to restore sigmask, syscall or no syscall Vijay Ganti - cpufreq: interactive: Fix null pointer dereference in interactive governor Ke Liu - ARM: dts: update frequency to corner and quot mapping for CPR on msm8926 Gilad Avidov - spmi: Correct pointer casting and arithmetic Girish Mahadevan - msm: msm_bus: Allow QOS address offset to be configurable Akhila Musunuri - Revert "ARM: dts: msm: change emmc clock line drive strength" Himanshu Aggarwal - input: touchscreen: Remove redundant code from Goodix driver Panwar Vivek - Revert "Revert "ARM: dts: msm: Move data to devicetree for 8926"". Panwar Vivek - Revert "Revert "power: qpnp-charger: allow 0 mA iusbmax request"". Mitchel Humpherys - msm: ADSPRPC: Always map buffers into IOMMU if one is present Patrick Daly - ARM: dts: msm: Add cpu clock device for 8610 Talel Atias - msm: ecm_ipa: add differentiation for EP config Vijayavardhan Vennapusa - USB: gadget: u_bam: Add module parameter for max packets pending with bam Sahitya Tummala - PM / devfreq: Add new flag to do simple clock scaling Ming-yi Lin - net/wireless: Fix kernel crash while doing iwlist scan Xiaozhe Shi - power: qpnp-charger: report full when charger is plugged in at 100 SoC Patrick Daly - msm: clock-8610: Add clock lookup entries for clock-a7 driver Pavankumar Kondeti - usb: storage: enable scsi auto-suspend for USB UICC devices Sujit Reddy Thumma - scsi: Allow auto suspend override by low-level driver Aaron Lu - sd: call blk_pm_runtime_init before add_disk Sujit Reddy Thumma - mmc: sdhci-msm: Fix clock gating while voltage switch is in progress Hemant Kumar - net: usb: Do not modify usbnet device context upon rx complete Manish Kumar - Revert "ARM: dts: msm: Move data to devicetree for 8926" Panwar Vivek - Revert "power: qpnp-charger: allow 0 mA iusbmax request" Vikash Garodia - msm: vidc: add sleep of 100us before clock disable Dov Levenglick - usb: f_qc_rndis: set context for encapsulated response Diego Wilson - ARM: dts: msm: Add panel dimension details for Truly WVGA panel Abhijeet Dharmapurikar - gpio: qpnp-pin: map interrupts only when required David Keitel - power: qpnp-charger: enable arb workaround for DC_IN Dipen Parmar - hwmon: qpnp-adc: Add check for wrong calib data Oliver Wang - input: sensors: fix the bmp18x driver request regulator multiple times Laura Abbott - fs: fuse: Add replacment for CMA pages into the LRU cache Murali Nalajala - msm: msm_rq_stats: remove is_smp() API Katish Paran - diag: Safeguard for bound checks and integer underflow Ray Zhang - ARM: dts: msm: fix ssd2080m pixel corruption issue Maria Yu - rtc: alarm: have dummy set_power_on_alarm function Asutosh Das - mmc: block: stop bkops during shutdown Sheetal Sahasrabudhe - msm: perf: Fix cpu id logic in tracectr notifier Saket Saurabh - ARM: dts: msm: Disable AHB2AHB By pass mode in device mode Kumar Gala - rtc: alarm: init power_on_alarm_lock mutex in alarmtimer_rtc_timer_init Oliver Wang - input: sensors: correct the min_delay of mpu3050 Olav Haugan - USB: dwc3: Fix compilation error when debugfs is disabled Pavankumar Kondeti - usb: core: Limit HCD old enumeration scheme request to root ports Sujit Reddy Thumma - mmc: core: Hold host resume status while card rescan is in progress Walter Yang - ASoC: msm8x10-wcd: Reduce pop noise when earpiece is switched fast Konstantin Dorfman - mmc: core: do not reinsert prepeared FUA and FLUSH requests in stop flow Pavankumar Kondeti - defconfig: 8226: Enable USB CCID class driver Pavankumar Kondeti - USB: ccid_bridge: Add support for USB smart card class Padmanabhan Komanduru - msm: clock-mdss: Update the PLL lock sequence for 8x26 Mohammad Johny Shaik - ASoC: msm: Add RDAC3 Mixer control support for headset right. David Keitel - power: qpnp-charger: report trickle charging correctly Neil Leeder - msm: perf: fix formatting of trace entry Skylar Chang - msm: ipa: Fix the format string vulnerability. Oliver Wang - input: sensors: add enable and poll_delay handle for cm36283 sensor driver Matt Wagantall - msm: clock-krait-8974: Expose PVS table data through module parameters Gopikrishnaiah Anandan - ASoC: compress: Update lock for dpcm calls Sreelakshmi Gownipalli - diag: Add mutex protection while writing to smd Gopikrishnaiah Anandan - ASoC: dapm: Fix race condition in dapm Junjie Wu - ARM: dts: msm: Update 8974Pro PVS table to config v1 Hemant Gupta - Bluetooth: HID: Add support for building hid drivers Oliver Wang - input: sensors: add enable handler for mma8x5x Amy Maloche - input: touchscreen: add Kconfig & Makefile entries for atmel_maxtouch_ts Pavankumar Kondeti - usb: ehci-msm-hsic: avoid double free of platform data Saravana Kannan - ARM: dts: msm: Add kraitbw-l2pm device for 8974 Houston Hoffman - ARM: dts: msm: Add NFC device for squab V2 devices Shantanu Jain - ARM: dts: msm: Change soft button key code for msm8610 qrd Shantanu Jain - input: touchscreen: Remove irq polling from Goodix driver Shantanu Jain - input: touchscreen: Add debugfs support for suspend/resume. Shantanu Jain - input: touchscreen: Code clean-up for Goodix driver Shantanu Jain - input: touchscreen: Replace Kernel thread with a workqueue Shantanu Jain - input: touchscreen: Add virtual key support from dtsi Shantanu Jain - input: touchscreen: Remove improper debug code Shantanu Jain - input: touchscreen: Add devm_kzalloc calls to goodix driver Shantanu Jain - input: touchscreen: Clean initialising linux kernel code Shantanu Jain - input: touchscreen: Use macros for magic numbers in Goodix drivers Shantanu Jain - input: touchscreen: Correct return value check in Goodix driver Shantanu Jain - input: touchscreen: Clean code for i2c_read and i2c_write Sagar Dharia - slimbus: Provide framer-booted notification to slimbus device drivers Will Deacon - netfilter: x_tables: fix ordering of jumpstack allocation and table update Venkat Gopalakrishnan - msm: Remove old unused sdio related code Matt Wagantall - defconfig: msm8974: Disable CONFIG_MSM_L2_ERP_1BIT_PANIC Sameer Thalappil - defconfig: Enable WCNSS register dump on WCNSS bite Saravana Kannan - ARM: dts: msm: Add L2 perf monitor interrupts to bypass list Dipen Parmar - msm: sps: Enable the clocks when BAMDMA available Wu Fenglin - spmi: pmic_arb: Fix opcode calculate error in pmic_arb_cmd Maria Yu - arm: msm: add alarm reboot reason Katish Paran - diag: dci: Safeguard to prevent integer overflow Manu Gautam - USB: u_serial: Don't free usb_requests in gs_close and reuse them Zhen Kong - Revert "crypto: Fix memory leak in bam_release call" Bingzhe Cai - input: misc: mma8x5x cannot change polling delay Jie Cheng - sensors: unify the poll delay interface name of bmp18x sensor driver Oliver Wang - input: sensors: add enable and poll_delay handler for mpu3050 sensor driver Jie Cheng - sensors: add enable and poll_delay handle for stk3x1x sensor drver Abinaya P - leds: leds-qpnp: Rename WLED OVP Enumeration Ke Liu - ARM: dts: msm: enable update target quotient value for msm8926 Ke Liu - msm: cpr-regulator: add support for quotient adjustment algorithm Siddartha Mohanadoss - hwmon: epm_adc: Add debug logs Jie Cheng - sensors: add enable and poll_delay handle for bmp18x sensor drver Oliver Wang - input: sensor: adjust the cm36283 sysfs interface path Wu Fenglin - hwmon: qpnp-adc: add battery thermistor mapping table for skug Ke Liu - msm: cpr-regulator: remove maxmize and restore down threshold Ke Liu - msm: cpr-regulator: change device tree vendor prefix from 'qti' to 'qcom' Tushnim Bhattacharyya - kernel: enable internaldb on perf build Jie Cheng - sensors: add enable and poll_delay handle for kxtj9 sensor drver Bingzhe Cai - input: misc: stk3x1x: remove unnecessary log message Vijayavardhan Vennapusa - USB: dwc3: gadget: Add support for sending zero length packets Asutosh Das - mmc: sdhci: do not use maximum timeout for all cards Asutosh Das - mmc: core: increase data-timeout value for Hynix cards Asutosh Das - mmc: sdhci: retune on cmd or data CRC error Pan Fang - msm: restart: Add pmic wdog fix for emergency download mode. Dipen Parmar - msm: sps: Fix error case handling in probe function Jie Cheng - sensors: add enable and poll_delay APIs for sensor class driver Abinaya P - ARM: dts: MSM: Remove entry for flash1 on 8x26 Ke Liu - msm: cpr-regulator: add support for virtual corner based quotient scaling Ke Liu - msm: cpr-regulator: add debug message in cpr_scale Maya Erez - mmc: card: fix arbitrary write via read handler in mmc_block_test Kiran Kandi - ASoC: msm: hold lock while allocating and freeing ASM clients Ke Liu - ARM: dts: msm: change cpr SVS voltage for msm8x10 Vikram Mulukutla - msm: clock-8974: Allow measurement of clocks in the WCNSS Vikram Mulukutla - msm: clock-8610: Allow measurement of clocks in the WCNSS Vijayavardhan Vennapusa - USB: gadget: f_mtp: Fix bug in receive_file work Ravi Aravamudhan - diag: Send non real time control packet to all peripherals Patrick Daly - ARM: dts: msm: Move data to devicetree for 8926 Krishna Konda - ARM: dts: msm: change emmc clock line drive strength Girish S Ghongdemath - ARM: dts: msm8974: Update MPM mapping to bypass few GIC interrupts David Collins - ARM: dts: msm: allow VDD_CX to operate in AUTO mode for MSM8974Pro Anurag Singh - ARM: dts: msm8974pro: nullify the effect of io-fraction for the GPU Raviv Shvili - mmc: core : fix arbitrary read/write to user space Stephen Boyd - input: sensor: cm36283: Remove earlysuspend code Abhijeet Dharmapurikar - ARM: dts: msm: update ldo-delta to 12.5mV for 8084 and 8974pro devices David Keitel - power: qpnp-charger: allow 0 mA iusbmax request Lucille Sylvester - ARM: dts: msm8974pro: Correct nominal GPU frequency request Ke Liu - ARM: dts: msm: change turbo floor voltage for msm8x10 Sahitya Tummala - mtd: msm_qpic_nand: Fix buffer overflow issue Oliver Wang - input: sensor: fix mpu3050 not connected due to power logic error Phani Kumar Uppalapati - ASoC: wcd9xxx: Notify mbhc when TX1/IN1 path is enabled Hamad Kadmany - csdio: Remove the driver Saket Saurabh - ehci-msm2: Add boundary check in echi driver Vijayavardhan Vennapusa - USB: gadget: f_uac1.c: Fix bug in accessing freed buffer pointer Oliver Wang - input: sensor: remove the input open/close interface for mpu3050 Katish Paran - diag: dci: Safeguard to prevent Integer Underflow and Memory Leak Neeti Desai - defconfig: Disable OCMEM on msm8610 Houston Hoffman - ARM: dts: msm: Add NFC device for 8226-qrd devices Mihir Shete - msm: wlan: update db.txt for Taiwan Osvaldo Banuelos - Revert "tcp: call sock_orphan() before freeing socket in tcp_nuke_addr" Neil Leeder - Perf: preserve registers across hotplug Sheetal Sahasrabudhe - Perf: Fix PID for tracepoints Sheetal Sahasrabudhe - Perf: Make per-process counters cumulative Neil Leeder - msm: perf: clean up duplicate constraint events Evgeniy Borisov - ARM: dts: MSM: Remove flash source flash1 on 8x26 Ujwal Patel - defconfig: msm: Add configuration for MDP3 Sarang Joshi - defconfig: remove support for /dev/mem and /dev/kmem on perf builds Sujit Reddy Thumma - mmc: host: Use sentinels for devicetree match tables Dipen Parmar - msm: sps: Add integer wrap check for debugfs buffer Subhash Jadavani - mmc: queue: scale down the max_segs if memory allocation fails Xu Han - ARM: dts: msm: Added torch-source for 8974 mtp Dixon Peterson - diag: Correct the minimum dci packet length Aparna Das - ARM: dts: apq: add remote debugger dt entry for dragonboard8074 Dipen Parmar - msm: sps: Add probe deferral support in sps driver Hamad Kadmany - media: dvb: Add cache maintenance when working with SDMX Hamad Kadmany - msm: tspp: Fix memory leak Dilip Kota - ARM: dts: msm: Removing UART Entry at f995e000 Padmanabhan Komanduru - msm: mdss: Change wait_for_completion to timeout in MDSS DSI driver Aparna Das - defconfig: 8610: enable remote debugger driver Aparna Das - defconfig: 8226: enable remote debugger driver Aparna Das - defconfig: 8974: enable remote debugger driver Aparna Das - ARM: dts: msm: add remote debugger driver dt entry for 8610 Aparna Das - ARM: dts: msm: add remote debugger driver dt entry for 8226 Aparna Das - ARM: dts: msm: add remote debugger driver dt node on 8974 Aparna Das - ARM: dts: msm: add dt entry for remote debugger driver support Aparna Das - msm: add support for remote debugger driver Vimal Puthanveed - ARM: dts: msm: Add device tree node for ASM loopback Ravi Aravamudhan - diag: dci: Remove the cap on number of delayed rsp registrations Matt Wagantall - defconfig: Disable CONFIG_SYSRQ_SCHED_DEBUG for MSM targets Matt Wagantall - sched/debug: Make sysrq prints of sched debug data optional Sujit Reddy Thumma - mmc: core: fix buffer overflow during memcpy of ext_csd Kuirong Wang - ARM: dts: msm: Add digital MICs to audio routing for msm8610 Ram Chandrasekar - ARM: dts: msm: Enable optimum current request support in KTM for MSM8974Pro-AC Laura Abbott - mm: change freepage state correctly in __isolate_free_page Ravi Aravamudhan - diag: dci: Remove the cap on number of delayed rsp registrations Saket Saurabh - arm/dt: 8226: Disable otg-disable-reset flag Olav Haugan - deconfig: msm8610: Reduce default CMA region to 4MB Liam Fernandez - kernel: rng: Change master id to 54 in rng vector Amy Maloche - defconfig: msm8974: Enable secure touch Osvaldo Banuelos - tcp: call sock_orphan() before freeing socket in tcp_nuke_addr Jie Cheng - sensors: Add the class device support for cm36283 sensor Jie Cheng - sensors: Add the class device support for mma8x5x sensor Jie Cheng - sensors: Add the class device support for mpu3050 sensor Jie Cheng - sensors: Add the class device support for bmp18x sensor Jie Cheng - sensors: Add the class device support for stk3x1x sensor Chandan Uddaraju - ARM: dts: msm: Add CX regulator Phandle to MDP node Vladimir Razgulin - PM / devfreq: Add a new target flag for the performance governor Jorge Solano Altamirano - [media] v4l2-ctrl: add constrained high h.264 profile to menu Zhoulu Luo - Revert "ARM: dts: msm: Add NFC device for 8974 bc" Badhri Jagan Sridharan - ARM: dts: msm8974pro: Update MPM mapping for GIC interrupts Xiaozhe Shi - power: qpnp-bms: disable sw_cc_thresh interrupt after it fires Mohit Aggarwal - diag: diag over uart not working for QSC David Keitel - power: qpnp-charger: check for reverse boost on probe Abhijeet Dharmapurikar - power: qpnp-charger: fix charging timer Dilip Kota - msm_serial_hs: Fix the wrong register offset Macro usage Houston Hoffman - ARM: dts: msm: Add NFC device for 8974 bc Houston Hoffman - defconfig: msm8974: Add NFC for 8974 devices Dilip Kota - msm_serial_hs: Fix register access issue Dilip Kota - msm_serial_hs: Add IPC Logging Jie Cheng - sensors: remove the write permisson of sensor class sysfs Kuogee Hsieh - mdss: display: remove checking of pwm gpio from pwm config Ujwal Patel - msm: mdss: Fix MDP hang issue for H2V1 interleaved formats Siddartha Mohanadoss - hwmon: qpnp-adc-current: Fix potential race condition Saket Saurabh - arm/dt: 8610: Enable support for vdd min without phy retention Saket Saurabh - usb: msm_otg: Add support for vdd min without phy retention Project: kernel/motorola/omap4-common Michael Gernoth - Revert "moto lis3dh: use i2c block API" Michael Gernoth - omap4-common: prevent lis3dh from overwriting arbitrary kernel memory Project: system/media Eric Laurent - audio_route: fix crash with unsupported control types elektroschmock - Revert "audio_route: fix possible segfault" Project: hardware/libhardware_legacy Steve Kondik - audio: Fix check for sonification on digital docks Project: packages/apps/DSPManager Ricardo Cerqueira - Add an explicit license Project: packages/apps/Camera2 Lars Greiss - Camera2: tweak volume key zoom and cleanup Lars Greiss - Camera2: add option to prevend autofocus cancel if preview stopped Lars Greiss - Camera2: fix possible NPE on configurationchange Lars Greiss - Camera2: actually fix ArrayAdapter on MoreSettingsPopup Project: packages/apps/Settings martincz - Settings: mokee bringup martincz - Settings: Simplified Chinese Translations Jorge Ruesga - settings: fix battery stats Project: device/samsung/d2-common Dave Daynard - Revert "d2-common: remove continuous-picture mode" nicklovell23 - Camrea2: overlays continuous focus/Cancel autofocus if preview stopped Jon S - d2: prevent boot led from overriding charging led, take 2 ajrty33 - d2: prevent boot led from overriding charging led Project: device/samsung/i9500 martincz - i9500: mokee bringup martincz - i9500: mokee bringup martincz - mokee bringup Alberto96 - nfc: update NFC Configuration from Stock 4.3 Samsung ROM Alberto96 - BoardConfig: enable recovery swipe support Alberto96 - cm: new fingerprint from newer Samsung ROM Alberto96 - i9500: enable CWM Key Repeat and add new ril props Alberto96 - i9500: Enable Samsung STK support Alberto96 - i9500: Report barometer support Alberto96 - i9500: fix touchkey haptic feedback Alberto96 - i9500: Fix datamedia permission Project: device/samsung/smdk4412-common David Ferguson - Proper battery paths Project: android martincz - manifest: Track our own prebuilts/misc martincz - rename Project: frameworks/av martincz - av: Turn camera shutter sound on/off (2/2) Haynes Mathew George - audio: Use composition instead of multiple inheritance Pavan Chikkala - audio: Check the return code of MediaWriter::start Naresh Tanniru - Audio: Tunnel Exception for ER AAC ELD profile format Nitesh Bhardwaj - audioflinger: Add Null pointer check while enabling effects for LPA Phani Kumar Allada - framework/av: Fix for frame drop in video playback wjiang - audio: Supress redundant effect config events in short duration Sharad Sangle - audioflinger: SRS effects are not working for LPA Eric Laurent - audioflinger: do not use raw pointer for tracks Shashank Mittal - media: Add Ops check before starting audio recording. wjiang - framework/av: Check for NULL pointer of mCblk and zero division error Divya Narayanan Poojary - frameworks/av: Mediacodec initialization check in QCUtils Project: frameworks/base Nilesh Poddar - Release wakelocks acquired by SyncManager Guntawee Tiwapong - server: Handle broadcast intent and receiver Jorge Ruesga - base: fix battery stats Project: external/consumerir martincz - move to top folder Project: external/koush/ion Koushik Dutta - v122 Koushik Dutta - Only allow deepZoom for API level >= 10. Project: vendor/samsung/i9500 martincz - update vendor files Project: vendor/sony/rhine-common martincz - update vendor files link:http://download.mfunz.com/?device=galaxysmtd
|
| Gracias de parte de: | ||
|
#206
23/02/14, 07:08:36
|
||||
|
||||
|
Ya probé todas de igual manera y siempre regreso a esta, me gusta su estabilidad, deseo, todo..
Además ya pude solucionar el problema con las OTAS porque daba error status 7..
|
|
#207
02/03/14, 09:37:02
|
||||
|
||||
|
Cita: Originalmente Escrito por heros_45
Ya probé todas de igual manera y siempre regreso a esta, me gusta su estabilidad, deseo, todo..
Además ya pude solucionar el problema con las OTAS porque daba error status 7..
|
|
#208
04/03/14, 07:09:48
|
||||
|
||||
|
Cita: Originalmente Escrito por esdiba
¿como lo solucionaste?
Si puedes bajarlas antes es mejor.. 1. Instalar la rom 2. Instalar las gapps que esta en el mokee center y solucionado el Status error 7
|
|
#209
04/03/14, 18:20:13
|
||||
|
||||
|
Alguna sulucion para poner cualquier tema , por q me pone que son incompatbiles
__________________
Moto G / Nexus 6 / Nexus 9
|
|
#210
04/03/14, 20:26:44
|
||||
|
||||
|
alguien sabe como aplicar temas de mokee 44.2 saludos
|
|
#211
05/03/14, 02:50:31
|
||||
|
||||
|
Con respecto e a esto te puedo ayudar en algo con el siguiente enlace de xda donde se le da solucion a los temas en mokee:
http://forum.xda-developers.com/show....php?t=2577469
|
|
#212
06/03/14, 16:54:07
|
||||
|
||||
|
Cita: Originalmente Escrito por heros_45
Después de instalar la rom no instales las gapps, en el primer reinicio baja las gapps que están en mokee center y esas flashea.
Si puedes bajarlas antes es mejor.. 1. Instalar la rom 2. Instalar las gapps que esta en el mokee center y solucionado el Status error 7
__________________
Moto G / Nexus 6 / Nexus 9
|
|
#213
08/03/14, 09:35:40
|
||||
|
||||
|
Cita: Originalmente Escrito por DJHAMILTONS
Pero puedes cambiar de Kernel o tiene que ser con el de serie
|
|
#216
18/03/14, 17:54:45
|
||||
|
||||
|
Yo no las desinstalo, las deshabilito.
__________________
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ESTE es mi blog ¡también hablo de Android! 
|
|
#217
18/03/14, 21:49:08
|
||||
|
||||
|
Cita: Originalmente Escrito por heros_45
Por más que flasheo otras roms, siempre regreso a esta.. Con el ultimo Kernel de Mackay va perfecta..
Yo tambien he vuelto a esta pero a la 140117 que es la que mejor va para mi gusto con el kernel mackay 6.0.7. La actualicé ayer via OTA y tuve que quitarla porque me daba errores varios. Echo de menos la personalizacion de la C-rom pero esta cumple con lo que necesito 
|
|
#218
28/03/14, 04:37:58
|
||||
|
||||
|
modo oscuro el dialer
alguien sabe si se puede cambiar a modo oscuro el dialer, contactos y demas de la rom mokee? para galaxy s4 i9500.... 4.4.2.... gracias de antemano....
|
|
#219
29/03/14, 07:15:49
|
||||
|
||||
|
Cita: Originalmente Escrito por starsy
Yo tambien he vuelto a esta pero a la 140117 que es la que mejor va para mi gusto con el kernel mackay 6.0.7. La actualicé ayer via OTA y tuve que quitarla porque me daba errores varios. Echo de menos la personalizacion de la C-rom pero esta cumple con lo que necesito
|
|
|
|
#220
01/04/14, 13:01:37
|
||||
|
||||
|
Hola.
Alguien puede confirmar si funciona la salida de tv con el adaptador hdmi de samsung ? Lo conecto y me marca carga pero no me activa la salida de tv en el menu. Graciassssss. [EDITO] Solucionado, se me fue la pinza... (solo la pinza ?) Con un conector jack a rca lo tengo funcionando a la perfección para las series y los partiditos. [FIN DE EDICION] Freiserk. Última edición por freiserk Día 01/04/14 a las 18:25:00.
|
 |
Estás aquí
|
||||||
|
||||||
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/unknown.gif)
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar195768_1.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar1094146_1.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar322723_1.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar695249_3.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar1042871_4.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar317464_2.gif){kind=avatar}
![Array
[xs_avatar]](https://avatar.htcmania.com/avatares/avatar476594_5.gif){kind=avatar}