Problema al instalar room RileyROM_1.8 AYUDA por favor.

[Jaruco]

Hola; necesito vuestra ayuda, he intentado instalar la room de Riley que dicen van tan bien mediante el metodo que viene en el guia burro de Riey:
He usado la herramienta que el proporciona Flash Tool, llegado hasta donde hago el borrado de memoria, y luego he de dar al boton de flash room:
"Now you are ready to start the flash process
Click Erase IDB.
I suggest that you erase IDB every time you are upgrading to a new ROM, or if you encounter a problem and need to reflash the current entire ROM.
This will start a low level format of your whole NAND memory. It will count up to however much NAND memory you have installed on your device. Different devices have different numbers it will count up to so I can't be exact. As an example, lets say your device has a count of 4096 - let it count all the way to that number. If it only counts a few numbers then says it's done - that means the format failed. If this happens, see Q&A at the bottom of this file.
After you erase the IDB, it is time to flash the ROM. You will notice on the Flash Tool screen a list of the ROM's components. For details on what each file and entry is for, look below. To begin the flashing procedure, click "Flash ROM".

Llegado este punto, me sale error de "parameter not find", y encima he borrado la tablet ya ahora no va nada logicamente.
Que hago? Parece que es un problema de la room que no esta cargada en el flastool?

[Kaoukunen]

 Cita: Originalmente Escrito por Jaruco

Hola; necesito vuestra ayuda, he intentado instalar la room de Riley que dicen van tan bien mediante el metodo que viene en el guia burro de Riey:
He usado la herramienta que el proporciona Flash Tool, llegado hasta donde hago el borrado de memoria, y luego he de dar al boton de flash room:
"Now you are ready to start the flash process
Click Erase IDB.
I suggest that you erase IDB every time you are upgrading to a new ROM, or if you encounter a problem and need to reflash the current entire ROM.
This will start a low level format of your whole NAND memory. It will count up to however much NAND memory you have installed on your device. Different devices have different numbers it will count up to so I can't be exact. As an example, lets say your device has a count of 4096 - let it count all the way to that number. If it only counts a few numbers then says it's done - that means the format failed. If this happens, see Q&A at the bottom of this file.
After you erase the IDB, it is time to flash the ROM. You will notice on the Flash Tool screen a list of the ROM's components. For details on what each file and entry is for, look below. To begin the flashing procedure, click "Flash ROM".

Llegado este punto, me sale error de "parameter not find", y encima he borrado la tablet ya ahora no va nada logicamente.
Que hago? Parece que es un problema de la room que no esta cargada en el flastool?

Has actualizado los drivers en administrador de dispositivos?