[05.02.12][VooDoo] N.E.A.K. Kernel for I9100 - Think Different! (v1.3.3x)

ONLY FOR SAMSUNG-BASED ROMs (NO CM/MIUI, NO ICS, neither samsung one)

ONLY FOR INTERNATIONAL I9100!!

BASIC FEATURES:

 Cita:

- Based on sammy update3 sources, updated to 2.6.35.14 (without hiding the OS bug!)
- CWM Recovery 5.0.2.7 NEAK Modded
- Governors: Ondemand, Lulzactive(default), Performance, Lagfree, Conservative (module), Lazy (module)
- Schedulers: BFQv3-R1, Noop, SIO, VR (default)
- XZ Compression only for KERNEL (+speed, --size)

INITRAMFS AND MISC:
- Auto-Root (3.0.7)
- Init.d Support
- Bootanimation Support (system/media & data/local)
- Touch Move Support + Touchscreen Fix (5 - thx to vitalij)
- BLN v2 support (by Creams)
- CIFS, FUSE, CUSE Support (modules)

CPU/GPU:
- NO OC!!!! (100-1200Mhz)
- CPU Undervolt support
- BUS Control Support (by GM)
- Complete control of freqs/voltages with Voltage Control/SetCPU
- Sleep-of-Death fixes
- GPU Overclock/Undervolt (by netarchy)
- Charging current interface support (by GM - via Voltage Control)
- New ARM Mali-400 Drivers (November '11)
- Speedmod Color/mDNIe values (by hardcore)

MEMORY & PERFORMACES:
- JHash 3 optimised
- SLQB Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- Disabled ALL the debugging (++speed, --size)
- AFTR ARM Idle Mode enabled by default (++battery)

CONNECTIVITY TWEAKS:
- Patch wakelock WiFi (by hardcore)
- Disabled debugging WiFi/BT
- New WiFi Drivers
- TCP/IP Tweaks

OPTIMISATIONS:
- Dynamic Hotplug with tweaked thresholds (no Tegrak 2nd core support, useless)
- 2nd CPU Core OFF when screen is locked
- ARM_ERRATA_743622
- Upstream patches and fixes from Galaxy Note sources
- Upstream patches and fixes from Linux 3.2 mainline kernel
- GPU UI Rendering
- fuelgauge wakelocks fixed (by Entropy)
- Compiled with CodeSourcery G++ Lite 2011.03 + Hard Float CFLAGS
- Ultra-Optimised EXT4 filesystem (from 3.2 linux kernel)
- Generally optimised code (removed useless functions and variables)
e molto altro

UNIQUE FEATURES:

 Cita:

- Modded Recovery with N.E.A.K. Menu:
1) Remove voltage settings (Voltage control)
2) Remove auto-nonwipe NEAR ROM (N.A. Now)
3) Create EFS Backup (in /sdcard/near)
4) Enable/Disable Conservative Governor
5) Enable/Disable Lazy Governor
- NO COMPRESSION for Initramfs (ultra fast boot!!)
- Tweaked Ondemand, lulzactive and lazy governors (sleepfreq = 500Mhz)
- Tweaked BFQ, SIO and VR Schedulers for NAND devices

CHANGELOG:

(Click para mostrar/ocultar)

v1.3.3x

KERNEL:
- defconfig: TREE_PREEMPT_RCU enabled (+performance)
- Enabled TINY_SHMEM (+performance)
- Original Samsung SAMOLED+ panel driver (better colours)
- BFQv3-R2 scheduler updated
- Samsung E4GT EL29 update: Bluetooth HID (possible fix for BTHID)
- Various patches and fixes for CPU Driver
- Added missing Android common patches
- arm: remove stale export of 'sha_transform'
- arm: remove "optimized" SHA1 routines
- Tweaking conservative a bit more to support lower sampling_rate
- cpuidle: Remove pr_info() that spams the dmesg
- wireless: bcm4330: Disable MAX power saving mode as disabled by Samsung
- Input: evdev - fix variable initialisation
- tspdrv: Add adjustable vibrator levels
- wakelocks: Allow independent debugging of wake_lock_destroy()


INITRAMFS:
- A bit updated Lionheart Tweaks
- Removed Louder Module (VL compatibility is built in)
- Auto insmod of ScreenTune module (removed option from recovery)
- Added support for N.E.A.K. OTA Updater
- Added N.E.A.K. Downloader (to download ota updater)
- Completely changed the way NEAK Options are enabled (1st patch for future neak app)


MISC:
- Compiled with Linaro GCC 4.5-2012.01
- New optimisation flags (thx to the_ozyrys @ XDA)
- Various patches and improvements
- A bit updated tweaks
- Smallest NEAK Kernel ever made!!! All with the same features and performances!!

v1.3.2x (bugfix release):
- Fixed all boot issues caused by 1.3.1!
- Full CPU Unaligned access enhanced! (+performance)

v1.3.1x:

KERNEL:
- Added support for ARM_ERRATA_754322 & ARM_ERRATA_754327
- Enabled ARM_ERRATA_754322 & ARM_ERRATA_754327
- A bit tweaked conservative gov to be a little more battery friendly
- Added support for vdd_levels (for Tegrak's Overclock)
- Some RAM Undervolt (1.1V)
- nohz: Fix update_ts_time_stat idle accounting
- sched_features: NO_GENTLE_FAIR_SLEEPERS
- cpuidle: Stop spamming the kernel message buffer when enabling AFTR
- Various general patches from upstream

INITRAMFS:
- Unsecured Kernel (adb root in recovery)
- Fixed a few CWM Issues
- Small cleanup file for issues with Thunderbolt!

MISC:
- A lot of compiler warning fixes (really a lot!) (thx to myfluxi)
- Added J4FS support (for param.lfs)
- Now supports Hellcat's Bootlogo App (from market)

v1.3x:
- SCHED_MC disabled by default (enable it via CWM NEAK menu)
- Amazingly smooth and battery friendly as never before!!
- Removed Interactive Governor (was causing issues, will readd into 1.4)
- Added support for Tegrak's 2nd Core App (Dynamic Hotplug by default)
- Re-enabled ARM_UNWIND (and removed frame pointers)
- Re-enabled UNALIGNED ACCESS for CPU (++performance)
- Various CPUFREQ and cpu management fixes and improvements
- A lot of fixes for SoDs and Performance Lacks (camera bug still there)
- Disabled ARCH_POWER from sched features
- Some various patches for power functions
- ram_console: pass in a boot info string
- cpuidle: governor: menu: don't use loadavg
- ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
- Removed more debugging (ramconsole and more)
- Enabled soft lockups and hung tasks detection
- Again smaller like 1.1x!!
- New recovery option (sched_mc enable/disable)
- Recovery auto-creates init.d folder if not found one
- Minor bugfixes for CWM (misc bugfixes)
- Removed SQLITE3 app libs optimising (was causing issues)
- More tweaks fixed and updated
- Updated Thunderbolt! CFS Tweaks

v1.2x:
- ARM CPU Topology + sched_mc enabled (++battery, boot is now slower, = performance after boot!) ;) (thx to linaro, i have included latest available)
- LulzactiveV2 Governor by Tegrak (tweaked by me, compatible with lulzactive app) :p
- New Siyah CPU Driver with Arighi's smooth freq scaling (++smoothness)
- Voodoo Louder and ScreenTuner Modules (enable via CWM NEAK, Voodoo Modules)
- init/calibrate.c: fix for critical bogoMIPS intermittent calculation failure
- init/calibrate.c: remove annoying printk
- init: skip calibration delay if previously done
- portd calibrate from 2.6.39 - by zachariasmaladroit
- binary_sysctl(): fix memory leak
- PM / Suspend: Fix ordering of calls in suspend error paths
- pmem: fix buddy free memory corruption bug
- rtc alarm: fix bad index when canceling alarms[]
- New recovery options (into neak menu): Voodoo, Lionheart
- Auto-install of modded liblights for BLN support
- Fixed some small bugs of nandroid backup of CWM
- A lot of fixes for tweaks
- More debugging removed
- A bit raised up charging current for USB (550mA)
- Fixed SDCARD Mounting issues

v1.1x:
- Lulzactive as default CPU Governor (++performace)
- Original lulzactive gov by Tegrak (with some mods by me)
- Lowered min GPU clock/voltage to save more battery
- Optimised ARM RWSEM algorithm (by Cattleprod)
- cpuidle: extend cpuidle and menu governor to handle dynamic states
- kernel:smp: Match on_each_cpu behaviour on UP to SMP
- nohz: Remove ts->inidle checks before restarting the tick
- New optimisation in EXT4 code (from linux 3.2 kernel)
- CPU Hotplug thresholds changed (saves battery and better scaling up)
- rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states
- fuse: register_filesystem() called too early
- ipv6: Fix for adding multicast route for loopback device automatically
- Enabled CGROUP_TIMER_SLACK (++performace)
- Enabled by default HRTICK and ARM POWER FUNCTIONS
- SAMOLED+ screen UNDERVOLT (3V ---> 2.5V) to save battery (= performace)
- Added LAZY Governor as a module (enable it via recovery)
- Some new mods to recovery (enable lazy gov)
- Aestetic changes in recovery (now it checks if a module is already enabled)
- Updated SU Binary
- Updated Thunderbolt 2.2.0 CFS Tweaks (thx to pikachu01)
- Removed more debugging (lighter than ever!!)
- Fixed some warnings
- More code cleanup (++speed)
- New CFLAGS optimisations

v1.0x: First internal release!

DOWNLOADS:

 Cita: Originalmente Escrito por sergy330

Comentar que este kernel sólo es válido para las ROMs basadas en Samsung (no CM/MIUI).

 Cita:

Última versión estable:

v1.3.3x CWM ZIP: CLICK HERE
v1.3.3x ODIN TAR: CLICK HERE

 Cita:

Aquí tenéis todas las versiones de este kernel: Aquí

Link xda
http://forum.xda-developers.com/show....php?t=1411788

[sergy330]

Gracias por el kernel noob

Comentar que este kernel sólo es válido para las ROMs basadas en Samsung (no CM/MIUI).

También recordad que este kernel lleva implementados perfiles para modificar las frecuencias cuando se apaga la pantalla con determinados gobernadores, así que no utilicéis perfiles con SetCPU para evitar conflictos.

 Cita: Originalmente Escrito por sergy330

Comentar que este kernel sólo es válido para las ROMs basadas en Samsung (no CM/MIUI).

Editado el 1 post, Gracias

[ferdy_cm]

Pues habrá que probarlo... O qué pasa???

[bostrom]

PROBANDO en YakkasRom v3.1 ... sta noche... primera carga al 100% y mañana día de prueba y estabilizacion... jajajaja
salu2

[kandem]

Ya comentareis yo con phenomenal 2.0 y brutal.

Enviado desde mi GT-I9100 usando Tapatalk

[zadkyn]

Pedazo de kernel esto es el futuro jejeje me encanta su cwm

Enviado desde mi GT-I9100 usando Tapatalk

[bostrom]

a mi no me sale ningun cwm...
salu2

[rovertovilla]

pues a flashear a ver que tal va!!

[Sensei Zaldi00]

alguien que lo haya probado que mire en la galería a ver si le salen todas las fotos,porque a mi no me salen fotos ni vídeos viejos,no se si sera cosa del kernel o que

[lobo70]

 Cita: Originalmente Escrito por zaldi00

alguien que lo haya probado que mire en la galería a ver si le salen todas las fotos,porque a mi no me salen fotos ni vídeos viejos,no se si sera cosa del kernel o que

mira a ver que no te haya formateado la sd externa a alguien le ocurrio con otro kernel

[Stbeas]

me da que voy a ponerlo yo también a ver como va!

 Cita: Originalmente Escrito por zaldi00

alguien que lo haya probado que mire en la galería a ver si le salen todas las fotos

A mi me sale todo, sin problemas, pero parece que hay problemas con las SD, no se externas o internas.
El kernel no esta nada mal pero no me gusta como rinden los juegos..esperando la siguiente version

[valepunto]

 Cita: Originalmente Escrito por noobishnoob

A mi me sale todo, sin problemas, pero parece que hay problemas con las SD, no se externas o internas.
El kernel no esta nada mal pero no me gusta como rinden los juegos..esperando la siguiente version

Ya ves a mi se me cerraba el gta3 por ejemplo y con este kernel vuela el juego.. Por otro lado, la estacada de 30% de bateria ( sin jugar ) que se a llevado en una hora no tiene nombre, le doy mañana de prueba pero a simple vista consume un hue..

[Sensei Zaldi00]

Definitivamente e cosa del kernel,la galería ni la musica me funcionan,no se ven las cosas,

[valepunto]

 Cita: Originalmente Escrito por zaldi00

Definitivamente e cosa del kernel,la galería ni la musica me funcionan,no se ven las cosas,

Es cosa de que formatea la tarjeta al instalarlo.. me a formateado un que tenia de 2gb con los backups dentro ajaj

[Chicharete]

 Cita: Originalmente Escrito por Stbeas

me da que voy a ponerlo yo también a ver como va!

Culo inquieto .. Yo lo estoy probando y por ahora pide bastante y como dice noob en los juegos va bastante justo.. Le voy a dar una semana a ver como se comporta

[tansy]

 Cita: Originalmente Escrito por Chicharete

Culo inquieto .. Yo lo estoy probando y por ahora pide bastante y como dice noob en los juegos va bastante justo.. Le voy a dar una semana a ver como se comporta

Pues en el modern combat 3 va de lujo,muy fluido

[emiliodeputas]

Ya va por la 1.3

[vvaleta]

Actualizo el titulo..