|
||
|
![]() |
![]() |
ROMs y desarrollo HTC One ROMs y desarrollo HTC One |
![]() |
|
Herramientas |
#1
|
||||
|
||||
Como Quitar letras Rojas de Splash?
Queria saber si hay algun modo de quitar las letras rojas del Splash, soy S-OFF y con base 3.17
SALUDOS.
__________________
El mundo no está en peligro por las malas personas, sino por aquellas que permiten la maldad.
|
|
#2
|
||||
|
||||
http://www.htcmania.com/showthread.php?t=625819 aquí tienes
|
Gracias de parte de: | ||
#3
|
||||
|
||||
https://mega.co.nz/#!3dBnVbYB!JyHUsn...OjoANZGCgooBWg y aquí el firmware para 3.17
|
Gracias de parte de: | ||
#5
|
||||
|
||||
http://d-h.st/Jtp y este es para quitar letras rojas
|
Gracias de parte de: | ||
#6
|
||||
|
||||
los comandos:fastboot oem rebootRUU
fastboot flash zip firmware.zip |
#7
|
||||
|
||||
http://d-h.st/Jtp y este es para quitar letras rojas
![]()
__________________
El mundo no está en peligro por las malas personas, sino por aquellas que permiten la maldad.
|
#10
|
||||
|
||||
Bueno, creo k dejare las letras, según he podido leer si metes un Hboot modificado, luego si kieres cambiar de firmware o hboot hay k volver a meter el original, aunque me he bajado el original también, pero si se me olvida la cago. :eek:
__________________
El mundo no está en peligro por las malas personas, sino por aquellas que permiten la maldad.
Última edición por ereodin Día 21/09/13 a las 15:39:57. |
#12
|
||||
|
||||
Yo lo he hecho en one s y tb en el one
De hecho en sección one s tengo un tutorial para quitar las letras y cambiar hboots Tb el de volver a stock modo fabrica Siendo s off no hay problema siguiendo los pasos al pie d la letra Esta claro q si se joroba el hboot dejas un bonito ladrillo ya q es el gestor de arranque Tampoco pasaría nada ya q el sat te lo cambiaría x uno nuevo ya q ni ellos podrán entrar Muchos compañeros brikearon a posta el one s para forzar el cambio en el sat En cuanto al hilo q te he puesto más arriba. Lo q tienes q hacer si eres s.off y con custom recovery Es coger los zips del post 2 del hilo d xda Justo al inicio del post 2 verás las letras rojas q tanto molestan Coges el zip modificado devla misma versión q tienes Ejecutas el comando x fastboot y adiós letras rojas Yo las he quitado Si da algún error no se te ocurra reiniciar Vuelves a flasear el zip siempre q estés en modo ruu con las letras HTC es recuperable Yo he probado los 2 modelos q hay en el hilo de xda En los del post 1 te actualiza radio hboot y te deja recovery stock Con esta prueba tuve fallo pero se quedó en modo ruu Y en la consola salía q volviera a flasear inmediatamente Volví a flasear el zip y listo pero esto me dejó recovery stock me actualizo radio y hboot Volví a meter twrp Otra vez letras rojas Pero esta vez flasee el zip del post 2 de la misma manera x comando fastboot en modo ruu Y esta vez se quitaron las letras y conserve twrp Lis zips del post 2 son sólo para quitar las letras |
#13
|
||||
|
||||
Modified and Stock Hboot zips for RUUmode (Red Warning Edit)
General Information Now that we have S-Off, (and ONLY if you have S-Off!) we can get rid of the red warning text, the development disclaimer overlay that has defaced our boot splashes until now. This build is for development purposes only Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action. This is not really anything new. It has been done many times before, there are numerous threads with this information and actually everyone can do it himself. I only post this for the sake of convenience. This is the same recipe as was used on other devices, these are RUUmode flashable hboot zips and work the same way as the firmware zips in post #1. They were modified to edit out the warning text; no other modifications. Enjoy a clean custom splash. Notice: Regaw_leinad has a thread for a utility called "RegawMOD" that allows more customization's of the hboot. My thread is only for this one edit, it is manually done, it flashes in RUUmode and is thus a very clean and safe method.I always test all of these on my own device. But as always, flash at own risk. You're writing to a critical part of your phone. If anything goes wrong along the way, you might be bricked. Downloads, Updates 16.09.2013 Update: added 1.55.0000 from Base 3.17 Modified - red warning removed. HowTo Step-By-Step:1. If device is booted into Android, reboot into bootloader by running: Now check the console output. It should approximately look like this: Code: C:\Android\com>fastboot flash zip orig_hboot_1.44.0000_M7_RUUmode.zip sending 'zip' (486 KB)... OKAY [ 0.245s] writing 'zip'... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... (bootloader) checking custom ID... (bootloader) start image[hboot] unzipping & flushing... (bootloader) [RUU]UZ,hboot,0 (bootloader) [RUU]UZ,hboot,52 (bootloader) [RUU]UZ,hboot,100 (bootloader) [RUU]WP,hboot,0 (bootloader) [RUU]WP,hboot,99 (bootloader) [RUU]WP,hboot,100 (bootloader) ...... Successful OKAY [ 2.176s] finished. total time: 2.425s Important: the flash process halts at 75% at phone screen! This is normal and a safety precaution! The last 25% is the reboot, which is NOT happening automatically, so you get a chance to check the console output before reboot to make sure it is safe to reboot! The bar will only fill up to 100% once you type the following command: Code:
fastboot reboot-bootloader Última edición por rmthx Día 21/09/13 a las 18:49:42. |
Gracias de parte de: | ||
#14
|
||||
|
||||
http://forum.xda-developers.com/show....php?t=2321794
Prueba esto es mas sencillo a mi me funciono solo lee antes de cualquier cosa
__________________
![]() |
#15
|
||||
|
||||
http://forum.xda-developers.com/show....php?t=2321794
Prueba esto es mas sencillo a mi me funciono solo lee antes de cualquier cosa ![]() yo no flasearia un hboot de operador americano solo flasearia el mismo hboot q llevo I made a plugin a couple of days ago for RegawMOD Bootloader Customizer for AT&T's HTC One. With this you all can customize your 1.44.0000 hboots to your hearts content. You can change *** UNLOCKED *** to any thing you like. Change the .0000 in the hboot version to any version you want (purely cosmetic), hide or customize the development disclaimer (red text at boot), update build date/time, and show S-On instead of S-OFF. Última edición por rmthx Día 21/09/13 a las 18:52:46. |
#16
|
||||
|
||||
Creo k es mayor el riesgo k el beneficio, ya no solo por k pueda dar algún error, si no por k olvides poner el original antes de meter un firmware nuevo, al fin y al cabo son unas letras k salen unos segundos.
Saludos y gracias a todos. ![]()
__________________
El mundo no está en peligro por las malas personas, sino por aquellas que permiten la maldad.
|
#17
|
||||
|
||||
Pues yo que soy un flaseador compulsivo y me gusta tener siempre el ultimo firmware, ademas tengo quitado las letras rojas con el hboot modificado y me acabo de enterar que al instalar un (próximo/nuevo firmare) me podria cargar el One si no instalo antes el hboot original.
![]() ¿pero que seria de todo esto sin un poco de emoción? ![]() |
#18
|
||||
|
||||
Es verdad yo traigo un at&t pero soy supercid no creo que halla problema ademas igual soy s-off y boot unlock, ojo que lo flashee ya estando en android revolution version internacional
__________________
![]() |
#19
|
||||
|
||||
Otra cosa igual actualize el firmware sin cambiar y ningun problema
__________________
![]() |
|
#20
|
||||
|
||||
Pues yo que soy un flaseador compulsivo y me gusta tener siempre el ultimo firmware, ademas tengo quitado las letras rojas con el hboot modificado y me acabo de enterar que al instalar un (próximo/nuevo firmare) me podria cargar el One si no instalo antes el hboot original.
![]() ¿pero que seria de todo esto sin un poco de emoción? ![]() ![]() ![]()
__________________
El mundo no está en peligro por las malas personas, sino por aquellas que permiten la maldad.
|
![]() |
![]() |
||||||
|