[KERNEL] [AnyKernel] HurtSky Kernel V20 10/7/2015 [dt2w] & Simpler V8 10/7/2015 [dt2w] byhurtsky

[slipknot30]

Attention
/*
I'm not a developer, im taking effort to put more choices of kernel for our community.*
This kernel is tweaked for my own taste.
Please do not request for more features*because i want to ensure the stability of the kernel first.
And thank you for using this kernel.
*

Disclaimer

Code:

/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *

WARNING !! Please read before proceeding to download section as to avoid any confusion happen !

This thread provided 2 kind of kernel, which is EXTRA version and SIMPLER version

EXTRA version provide more tuneables features and set balanced as default profile, this version born to satisfy expert or known tweaked user type so that they can tune the kernel by their own setting.

SIMPLER version is a kernel that tweaked in default which is more likely for users that do not want to mess up with the kernel setting or had a little knowledge to tuned the setting. The policy of this kernel version is just flash it and use it, simple as its name.*



CODE NAME: EXTRA VERSION

Features


- Compiled with latest Built with latest custom Gcc 5.1 ArchiToolchain optimized for Cortex-A7
- enabled Dynamic Fsync
- dynamic management of dirty page writeback
- Add AutoSMP hotplug driver (really nice)
- Add IntelliPlug
- updated Sched/fair structure
- GPU Adreno Idler for msm-adreno-tz - enabled by default
- ZEN, SIO, FIOPS, VR IO schedulers
- implement s2w dt2w
- Intelli Demand governor
- intelli Active governor
- Intelli Thermal V2
- zzmoove Governors with tweaked profile for moto G
- yanactive governor
- impluse governor
- enhanced lowmemorykiller from neobuddy - (greately try to avoid lowmemorykiller from killing systemui, contact, and process core)
- filter WAKEUP that caused from disabling AMBIENT DISPLAY (reduce wakeup)
- msm_limitter that limit freq at 600mhz during screen off
-*Powersuspend (for dt2w version only)
- KCAL support for post processing control [v2]
- Enable headset in high performance
- WQ_POWER_EFFICIENT for power oriented workqueues
- Optimized ARM RWSEM algorithm
- Asynchronous I/O latency to a solid-state disk greatly increased
- selinux in permissive
- Disable many debug option to reduced overhead of the kernel

Kernel Sources : - Github
https://github.com/hurtsky/android_k...torola_msm8226


Please ensure that you already used latest version of CM, thank you.. :-

Installation Guide :
Using TWRP
1. Reboot to recovery > Install > Pick the kernel > Confirm to Flash > Reboot
or
2. Flash it using*Flashify* https://play.google.com/store/apps/d...llner.flashify

Code:

Credit to :- - CyanogenMod Developer team for providing the source - developers that contributed in my github changes - all credit goes to them - xda-developers.com - and to all my kernel users, thanks.

Simpler Version (Just flash it)

Simpler Version*

Introduction:
This kernel introduce for users that did not want to mess up with the kernel setting or not really care what the setting OR more likely not really good in changing the value of tuneable kernel EXTRA VERSION thus this version are created for those people. This kernel was tuned in balanced mode, with all default features been enabled and disabled so the user no need to reconfigure the config of the kernel*[http://cdn3].


Features of this kernel:-*
- compiled with Achi Toolchain gcc 5.1
- -O3 and graphite optimization
- enabled Dynamic Fsync
- dynamic management of dirty page writeback
- updated Sched/fair structure
- remove alot of logging
- msm_limitter that limit freq at 600mhz during screen off
- adreno idler GPU enabled
- disable cpu-boost complety (cause too much high frequency)
- filter WAKEUP than caused from disabling AMBIENT DISPLAY (reduce wakeup)
- decrease the amount of time the device waits after entering low power mode to freeze processes by from 5ms to 2ms
- selinux in permissive
- disabled alot of debug functioning kernel to greatly reduce overhead of the kernel
- and much more patches that i may left out


NOTE: - for those who comes from stable version / others kernel please do dirty flash of your rom before installing this kernel, because this kernel script runs many setting in default at first boot.. thank you




Sources of this version can be found at there -

https://github.com/hurtsky/android_k...m-12.1-simpler

DOWNLOAD SECTION
https://www.androidfilehost.com/?w=files&flid=34910

Note : - if you comes from others kernel, please dirty flash your rom again to clean up any conflict from different kernel script.. let it reboot.. and flash this kernel.. thank you




Changelogs of Hurtsky Kernel

CHANGELOGS for EXTRA VERSION*>*CLICK HERE*https://github.com/hurtsky/android_k.../cm-12.1-extra

CHANGELOGS for EXTRA dt2w Version*>*CLICK HERE https://github.com/hurtsky/android_k...2.1-extra-dt2w

CHANGELOGS for SIMPLER VERSION*>*CLICK HERE https://github.com/hurtsky/android_k...m-12.1-simpler

CHANGELOGS for SIMPLER VERSION dt2w version*>*CLICK HERE https://github.com/hurtsky/android_k...1-simpler-dt2w

Please do not expect me to explain all changes, mostly can be found by googling them or look into the commit changes in github, also those information can be found in xda forum itself and i will not entertain those question. thank you

Note : - if you comes from others kernel, please dirty flash your rom again to clean up any conflict from different kernel script.. let it reboot.. and flash this kernel.. thank you*



Hilo oficial-----------> http://forum.xda-developers.com/moto...-2015-t3062059

Enviado desde mi Moto G mediante Tapatalk

[slipknot30]

Para mi es de lo mejorcito

Enviado desde mi Moto G mediante Tapatalk

[josecuchillo]

 Cita: Originalmente Escrito por slipknot30

Attention
/*
I'm not a developer, im taking effort to put more choices of kernel for our community.*
This kernel is tweaked for my own taste.
Please do not request for more features*because i want to ensure the stability of the kernel first.
And thank you for using this kernel.
*

Disclaimer

Code:

/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *

WARNING !! Please read before proceeding to download section as to avoid any confusion happen !

This thread provided 2 kind of kernel, which is EXTRA version and SIMPLER version

EXTRA version provide more tuneables features and set balanced as default profile, this version born to satisfy expert or known tweaked user type so that they can tune the kernel by their own setting.

SIMPLER version is a kernel that tweaked in default which is more likely for users that do not want to mess up with the kernel setting or had a little knowledge to tuned the setting. The policy of this kernel version is just flash it and use it, simple as its name.*



CODE NAME: EXTRA VERSION

Features


- Compiled with latest Built with latest custom Gcc 5.1 ArchiToolchain optimized for Cortex-A7
- enabled Dynamic Fsync
- dynamic management of dirty page writeback
- Add AutoSMP hotplug driver (really nice)
- Add IntelliPlug
- updated Sched/fair structure
- GPU Adreno Idler for msm-adreno-tz - enabled by default
- ZEN, SIO, FIOPS, VR IO schedulers
- implement s2w dt2w
- Intelli Demand governor
- intelli Active governor
- Intelli Thermal V2
- zzmoove Governors with tweaked profile for moto G
- yanactive governor
- impluse governor
- enhanced lowmemorykiller from neobuddy - (greately try to avoid lowmemorykiller from killing systemui, contact, and process core)
- filter WAKEUP that caused from disabling AMBIENT DISPLAY (reduce wakeup)
- msm_limitter that limit freq at 600mhz during screen off
-*Powersuspend (for dt2w version only)
- KCAL support for post processing control [v2]
- Enable headset in high performance
- WQ_POWER_EFFICIENT for power oriented workqueues
- Optimized ARM RWSEM algorithm
- Asynchronous I/O latency to a solid-state disk greatly increased
- selinux in permissive
- Disable many debug option to reduced overhead of the kernel

Kernel Sources : - Github
https://github.com/hurtsky/android_k...torola_msm8226


Please ensure that you already used latest version of CM, thank you.. :-

Installation Guide :
Using TWRP
1. Reboot to recovery > Install > Pick the kernel > Confirm to Flash > Reboot
or
2. Flash it using*Flashify* https://play.google.com/store/apps/d...llner.flashify

Code:

Credit to :- - CyanogenMod Developer team for providing the source - developers that contributed in my github changes - all credit goes to them - xda-developers.com - and to all my kernel users, thanks.

Simpler Version (Just flash it)

Simpler Version*

Introduction:
This kernel introduce for users that did not want to mess up with the kernel setting or not really care what the setting OR more likely not really good in changing the value of tuneable kernel EXTRA VERSION thus this version are created for those people. This kernel was tuned in balanced mode, with all default features been enabled and disabled so the user no need to reconfigure the config of the kernel*[http://cdn3].


Features of this kernel:-*
- compiled with Achi Toolchain gcc 5.1
- -O3 and graphite optimization
- enabled Dynamic Fsync
- dynamic management of dirty page writeback
- updated Sched/fair structure
- remove alot of logging
- msm_limitter that limit freq at 600mhz during screen off
- adreno idler GPU enabled
- disable cpu-boost complety (cause too much high frequency)
- filter WAKEUP than caused from disabling AMBIENT DISPLAY (reduce wakeup)
- decrease the amount of time the device waits after entering low power mode to freeze processes by from 5ms to 2ms
- selinux in permissive
- disabled alot of debug functioning kernel to greatly reduce overhead of the kernel
- and much more patches that i may left out


NOTE: - for those who comes from stable version / others kernel please do dirty flash of your rom before installing this kernel, because this kernel script runs many setting in default at first boot.. thank you




Sources of this version can be found at there -

https://github.com/hurtsky/android_k...m-12.1-simpler

DOWNLOAD SECTION
https://www.androidfilehost.com/?w=files&flid=34910

Note : - if you comes from others kernel, please dirty flash your rom again to clean up any conflict from different kernel script.. let it reboot.. and flash this kernel.. thank you




Changelogs of Hurtsky Kernel

CHANGELOGS for EXTRA VERSION*>*CLICK HERE*https://github.com/hurtsky/android_k.../cm-12.1-extra

CHANGELOGS for EXTRA dt2w Version*>*CLICK HERE https://github.com/hurtsky/android_k...2.1-extra-dt2w

CHANGELOGS for SIMPLER VERSION*>*CLICK HERE https://github.com/hurtsky/android_k...m-12.1-simpler

CHANGELOGS for SIMPLER VERSION dt2w version*>*CLICK HERE https://github.com/hurtsky/android_k...1-simpler-dt2w

Please do not expect me to explain all changes, mostly can be found by googling them or look into the commit changes in github, also those information can be found in xda forum itself and i will not entertain those question. thank you

Note : - if you comes from others kernel, please dirty flash your rom again to clean up any conflict from different kernel script.. let it reboot.. and flash this kernel.. thank you*

Ajo

Hilo oficial-----------> http://forum.xda-developers.com/m+(<...-2015-t3062059

Enviado desde mi Moto G mediante Tapatalk

Kmnnwz)*_&

Enviado desde mi XT1032 mediante Tapatalk

[josecuchillo]

Bbbov
La v. £ %,

Enviado desde mi XT1032 mediante Tapatalk

[mikivila]

 Cita: Originalmente Escrito por josecuchillo

Bbbov
La v. £ %,

Enviado desde mi XT1032 mediante Tapatalk

ni papa de ingles no?
o traduce "algo" o con el enlace a xda hubiera bastado

[jclrtuning]

Para CM o stock??

Enviado desde mi XT1032 mediante Tapatalk

[slipknot30]

 Cita: Originalmente Escrito por jclrtuning

Para CM o stock??

Enviado desde mi XT1032 mediante Tapatalk

Yo lo llevo en AOSP

Enviado desde mi Moto G mediante Tapatalk

[slipknot30]

Se puede eliminar este hilo
Gracias

Enviado desde mi Moto G mediante Tapatalk