[ CONSULTA ] Pago $$ a quien me guie al 100% para hacer root mi htc one m9

[Alonsogalaviz2109]

Pago $$$ a quien me guíe al 100% para hacer root mi dispositivo ya que e buscado tutoriales hasta en chino, taiwanes, koreano, ingles, y ninguno me a funcionado, tuve que cargar el software 1 vez y no e podido lograrlo hacer root, me urge tanto porque es Verizon, y restringe muchas cosas, como hostpot, un icono molesto, no puedo llamar a mi buzón, el inicio molesto promocional de Verizon, en fin. Saludos.

[fm4r1n]

Lo primero es desbloquear el bootloader

http://www.htcmania.com/showthread.php?t=1299710

[Alonsogalaviz2109]

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot OEM get_identifier_token.
usage: fastboot [ <option> ] <command>

commands:
update <filename> Reflash device from update.zip.
Sets the flashed slot as active.
flashall Flash boot, system, vendor, and --
if found -- recovery. If the device
supports slots, the slot that has
been flashed to is set as active.
Secondary images may be flashed to
an inactive slot.
flash <partition> [ <filename> ] Write a file to a flash partition.
flashing lock Locks the device. Prevents flashing.
flashing unlock Unlocks the device. Allows flashing
any partition except
bootloader-related partitions.
flashing lock_critical Prevents flashing bootloader-related
partitions.
flashing unlock_critical Enables flashing bootloader-related
partitions.
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked.
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce.
flashing unlock_bootloader <request> Issue unlock bootloader using request.
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback.
erase <partition> Erase a flash partition.
format[:[<fs type>][:[<size>]] <partition>
Format a flash partition. Can
override the fs type and/or size
the bootloader reports.
getvar <variable> Display a bootloader variable.
set_active <slot> Sets the active slot. If slots are
not supported, this does nothing.
boot <kernel> [ <ramdisk> [ <second> ] ] Download and boot kernel.
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ]
Create bootimage and flash it.
devices [-l] List all connected devices [with
device paths].
continue Continue with autoboot.
reboot [bootloader] Reboot device [into bootloader].
reboot-bootloader Reboot device into bootloader.
help Show this help message.

options:
-w Erase userdata and cache (and format
if supported by partition type).
-u Do not erase partition before
formatting.
-s <specific device> Specify a device. For USB, provide either
a serial number or path to device port.
For ethernet, provide an address in the
form <protocol>:<hostname>[:port] where
<protocol> is either tcp or udp.
-p <product> Specify product name.
-c <cmdline> Override kernel commandline.
-i <vendor id> Specify a custom USB vendor id.
-b, --base <base_addr> Specify a custom kernel base
address (default: 0x10000000).
--kernel-offset Specify a custom kernel offset.
(default: 0x00008000)
--ramdisk-offset Specify a custom ramdisk offset.
(default: 0x01000000)
--tags-offset Specify a custom tags offset.
(default: 0x00000100)
-n, --page-size <page size> Specify the nand page size
(default: 2048).
-S <size>[K|M|G] Automatically sparse files greater
than 'size'. 0 to disable.
--slot <slot> Specify slot name to be used if the
device supports slots. All operations
on partitions that support slots will
be done on the slot specified.
'all' can be given to refer to all slots.
'other' can be given to refer to a
non-current slot. If this flag is not
used, slotted partitions will default
to the current active slot.
-a, --set-active[=<slot>] Sets the active slot. If no slot is
provided, this will default to the value
given by --slot. If slots are not
supported, this sets the current slot
to be active. This will run after all
non-reboot commands.
--skip-secondary Will not flash secondary slots when
performing a flashall or update. This
will preserve data on other slots.
--unbuffered Do not buffer input or output.
--version Display version.
-h, --help show this message.

Esto es lo que me aparece y no me arroja ningun tocken

[fm4r1n]

Tienes los drivers bien? Tienes las opciones desarrollador activadas? Y habilitado depuración USB?

[Alonsogalaviz2109]

Son los drivers de la publicacion, ya me aparecen instalados, no se si requiera otro, y tambien tengo la depuracion activada, el problema es que no entra en modo bootloader, al seleccionar la opcion vuelve al menu, como si lo ubiese escogido nuevamente.

[fm4r1n]

no te deja entrar al menú bootloader?

[Alonsogalaviz2109]

No no me deja, al entrar inicia normalmente a lo mismo.