#21
|
||||
|
||||
Sencillo... haz un tuto con imágenes enm lugar de criticar los que hay...
Cita:
no es por burlarme de ti suriya, pero no sabes la de post asi que podrian evitar si pusieran los tutos con imagenes, y tambien vaya tela lo tuyo, seguro que ni puta idea de android y aleeee tu ahi a meterle todas las roms que trinques...lo siento, pero quien se mete en camisas de 11 varas le acaban sobrando 9
Última edición por c.martinez.lozano Día 23/08/10 a las 22:26:47. |
|
#22
|
||||
|
||||
You only need to install apanda 2.1.9(new 2.1.4), to install another rom than CMLMod you need to use fastboot mode, because is a modify of apanda 2.1.9 or 2.1.4, not an entire ROM. Sorry about my bad English PDT: Tell me the steps you did to have more information |
#23
|
||||
|
||||
Sencillo... haz un tuto con imágenes enm lugar de criticar los que hay...
En fin.. no sabes eso de quien no arriesga no gana? sin gente como el o como yo o como muchos más que han arriesgado algo, una persona que sólo sabe pedir todo bonito mascao, etc,etc podrá poner una rom sin riesgos. +1 Un saludo. |
#24
|
||||
|
||||
Sencillo... haz un tuto con imágenes enm lugar de criticar los que hay...
En fin.. no sabes eso de quien no arriesga no gana? sin gente como el o como yo o como muchos más que han arriesgado algo, una persona que sólo sabe pedir todo bonito mascao, etc,etc podrá poner una rom sin riesgos.
__________________
|
#25
|
||||
|
||||
ok. my phone is from orange austria. I used xp mode on windows 7 (maybe this was the big mistake?) I used this tutorial: http://www.htcmania.com/showthread.php?t=128235 1. i installed apanda 1.6.2, everything ok 2. i downloaded firmware 2.1.4 1.0, extracted and made setup (maybe this was the mistake?) 3. i downloaded firmware 2.1.9 (the .nb0 file) 4. i open RUT 1.2.2 i select file (the 2.1.9 file) i reboot my phone into fastbot mode (i can choose reboot, apply, wipe, wipe...), i connect usb. now rut 1.2.2 can see my phone and i can start update. now on my computer i see: "prepare to re-flash ROM image" on my phone: the screen becomes grey (nothing written just dark grey screen) and then on the computer i see error message and phone always grey screen. I take off battery and restart phone and it goes into fastboot. i can not select anything in fastboot (i can move with trackball, put if i press trackball nothing happens). i take off battery again and again restart and phone starts normal with apanda 1.6.2 now Apanda 1.6.2 is working on my phone (everything seems to work well) If i dial *#64# my phone says "connection error or wrong MMI code" If i go to settings -->About Phone --> Status i can see my correct IMEI... Tomorrow i will try everything possible on a windows xp machine and then i hope it works again p.s. at one point (i don't remember exactly when) i executed the setup file inside the phone. now i have chinese software starting when i plug my phone to the computer... sorry for so many questions, and muchas gracias Última edición por suriya Día 24/08/10 a las 06:00:57. |
#26
|
||||
|
||||
mascado no se, pero mira como suriya si te pone las capturitas de pantalla para que sepas como PODER RESOLVERSELO BIEN, mejor que si no te pusiera capturas verdad???
|
#27
|
||||
|
||||
suriya me alegro que se te haya resuelto el problema y que hayas podido poner la rom que querias (o eso entiendo), otros no han podido decir lo mismo y se han quedado con un bello pisapapeles
|
#28
|
||||
|
||||
pozo… ahora tengo un teléfono con el china android 1.6 y ningún internet…. no muy feliz…. espero que pueda conseguir CML 1.4 u otra versión de android 2.1 o estancia con 1.6 pero con internet....
now i'm also learning spanish P.S. i managed to set apn and now mobile internet works this is already good Última edición por suriya Día 24/08/10 a las 06:02:56. |
#29
|
||||
|
||||
Si buscas un manual cómo hacer ésto tirao... pues hazlo tu... xq yo por lo menos los que he escrito es xq me lo he currao por mi cuenta y a mi no me pagan por hacerlo, pagame y te pongo imágenes, xq por mi propia voluntad creo que hago más que suficiente;) vaya tela.... Y TODOS los tutos que he utilizado aquí... sin imágenes me han ido de perlas... y empecé sin saber de android ;) Y por cierto... que me aclara esa imagen? si sólo tiene un mensaje de error, por ser una imagen más bonita que texto escrito voy a entenderlo mejor?... en fin... Última edición por c.martinez.lozano Día 24/08/10 a las 07:38:17. |
#30
|
||||
|
||||
ok. my phone is from orange austria.
I used xp mode on windows 7 (maybe this was the big mistake?) I used this tutorial: http://www.htcmania.com/showthread.php?t=128235 1. i installed apanda 1.6.2, everything ok 2. i downloaded firmware 2.1.4 1.0, extracted and made setup (maybe this was the mistake?) 3. i downloaded firmware 2.1.9 (the .nb0 file) 4. i open RUT 1.2.2 i select file (the 2.1.9 file) i reboot my phone into fastbot mode (i can choose reboot, apply, wipe, wipe...), i connect usb. now rut 1.2.2 can see my phone and i can start update. now on my computer i see: "prepare to re-flash ROM image" on my phone: the screen becomes grey (nothing written just dark grey screen) and then on the computer i see error message and phone always grey screen. I take off battery and restart phone and it goes into fastboot. i can not select anything in fastboot (i can move with trackball, put if i press trackball nothing happens). i take off battery again and again restart and phone starts normal with apanda 1.6.2 now Apanda 1.6.2 is working on my phone (everything seems to work well) If i dial *#64# my phone says "connection error or wrong MMI code" If i go to settings -->About Phone --> Status i can see my correct IMEI... Tomorrow i will try everything possible on a windows xp machine and then i hope it works again p.s. at one point (i don't remember exactly when) i executed the setup file inside the phone. now i have chinese software starting when i plug my phone to the computer... sorry for so many questions, and muchas gracias You need to run on xp mode and as administrator in windows7 try to install with the SUT utility you download, but makes error for me. you have nb0 file of 2.1.9? if yes use RUT after SUT try to close mobile application on windows before install. Última edición por c.martinez.lozano Día 24/08/10 a las 07:39:24. |
#31
|
||||
|
||||
algun dia que me ponga mas metido en el tema de roms y demas, hare tutos con imagenes para sacar a mucha gente de dudas, y lo hare tambien sin que me pague nadie, pa ver si eso te hace entrar en razon de una vez conmigo... :S
|
#32
|
||||
|
||||
No es cuestión de entrar en razón o no.
Si tienes razón en cuanto a que es más fácil para mucha gente si lo ve con imágenes. No es que falten imágenes o no lo que me ha molestado, es mas bien, el hecho de decir a ver si se dignan a poner imágenes, como si la gente que ha hecho los tutoriales estuviese exclusivamente para hacer tutoriales. Cada uno hace lo que puede y con el tiempo que tiene. Lo importante es compartir para que todos podamos tener el móvil lo mejor posible, yo por ejemplo no tengo demasiado tiempo con el trabajo, y si alguien rehace un tutorial mío con imágenes, se lo agradecerán todos. Pero yo carezco de ganas y tiempo para ponerme a sacar imágenes pasito a pasito de algo que alomejor hice hace un mes... Espero que con esto salgas de dudas y dejemos ya este tipo de discusiones que no llevan a nada. PONER IMÁGENES, SI ES MEJOR, PERO NO TENGO TIEMPO DE HACERLO. |
#33
|
||||
|
||||
aiaiaia! i have apanda 2.1.9 today i'm the happiest man on forum.
i think i know what it was: i tryed almost everything. first on windows 7 64 bit with xp modus on virtual pc... DON'T TRY THIS!!!!!!!!! it has problems with drivers, and i almost bricked my phone..... BETTER NEVER TRY WITH WINDOWS XP ON A VIRTUAL MACHINE!!!! then i installed xp with sp3 and all updates on my pc, still the same errror (see couple of posts above) the thing that worked for me was to rename the file from: Hipi2_1_9_GMS版.nb0 to Hipi2_1_9.nb0 so i think maybe there was a problem with this strange symbol 版 thanks to everyone who helped me! so maybe better rename the file in download section. maybe nobody else will have problems, but better be sure... After i manage to install CML 1.4 i will share what i learned in english on xda developers if this is ok. so that other people that do not speak spanish can do this. special thanks to CML for helping Última edición por suriya Día 24/08/10 a las 17:48:18. |
#34
|
||||
|
||||
CML, me sigues malinterpretando. yo en ningun momento exigia capturas, pero si decia que si las habia mejor que mejor. para ver si entiendes que no estoy ni discutiendo ni peleando contigo (ni con nadie de este foro) lo que puedo hacer es hacer un tutorial con capturas de pantalla basada en las instrucciones hechas por ti cuando instale la rom y sepa como hacerlo...ok?
como bien dices, aqui estamos TODOS (incluido yo) para ayudarnos a tener un movil mejor, dejemos las "discusiones" de lado y pongamonos al lio |
#35
|
||||
|
||||
Pues tema aclarado no se hable más |
#36
|
||||
|
||||
aiaiaia! i have apanda 2.1.9 today i'm the happiest man on forum.
i think i know what it was: i tryed almost everything. first on windows 7 64 bit with xp modus on virtual pc... DON'T TRY THIS!!!!!!!!! it has problems with drivers, and i almost bricked my phone..... BETTER NEVER TRY WITH WINDOWS XP ON A VIRTUAL MACHINE!!!! then i installed xp with sp3 and all updates on my pc, still the same errror (see couple of posts above) the thing that worked for me was to rename the file from: Hipi2_1_9_GMS版.nb0 to Hipi2_1_9.nb0 so i think maybe there was a problem with this strange symbol 版 thanks to everyone who helped me! so maybe better rename the file in download section. maybe nobody else will have problems, but better be sure... After i manage to install CML 1.4 i will share what i learned in english on xda developers if this is ok. so that other people that do not speak spanish can do this. special thanks to CML for helping |
#37
|
||||
|
||||
el boston parece estar a prueba de todo y siempre hay alguna forma de resucitarlo, y doy fe de ello, jajajaja. un saludo. |
#38
|
||||
|
||||
En apañol, por si a alguien le da el mismo problema que a suriya, probar a borrar el caracter chino del fichero .nb0, yo en su momento tube el mismo problema y se soluciono. Saludos. |
#39
|
||||
|
||||
Buenas,
ahora mismo estoy en proceso de instalacion y para empezar la he cagado... he cogido sin mas y he instalado la ultima version 2.1.9 sin pasar por las otras. Todo ha arrancado bien, en chino, ahora lo he cambiado a ingles pero ¿se supone que he jodido algo? |
|
#40
|
||||
|
||||
En principio no.. la gente pasa 1º a la 1.6.2 xq lo que tu has hecho le fallaba.
prueba con otra tarjeta a ver si está liberado, y tb pureba a marcar *#06# a ver si tienes el imei que pone en la caja del movil. Salu2. |
Estás aquí | ||||||
|
Herramientas | |