[KERNEL] Abandonado

[moi12345]

TwistedKernel for PIPA(PAD 6) is out!

NOTES: no flash in pad 6 pro or your tablet enter in bootloop, this kernel is for pad 6 thanks!(normal version)(Only MIUI)

Download link:https://drive.google.com/file/d/1yWZ...ew?usp=sharing

Source code:https://github.com/DevUknown/kernel_xiaomi_pipa-twisted

Procediments for flashing:

1.Patch boot.img with magisk extract with payload dumper and dump boot.img from stock rom
2.Flash stock kernel with magisk.
3.Install FKM.
4.Download kernel zip and flash

Changes:
1.use adaptative power scaling and TEO cpudile governor for best battery performance
2.Increase UFS speeds
3.Removed Pm QoS operations from UFS source and removed xattr f2fs implementation from xiaomi so this cause ufs bad speeds
4.Balanced kernel with battery and performance.
5.This kernel uses MQ IO/Schedulers so you can use SSG scheduler backported from samsung source .
6.use tickless tick for use a minor usage of battery consumption in normal tasks.
7.Implemented thermal config switch(from xiaomi) you can switch thermal profile in franco kernel manager, prime cluster is not working at maximum frequency constantly when reaches "high" temperatures all clusters reduce frequency and with this reduce heat without thermal throttling mantaining performance
8.Other changes

[moi12345]

TwistedKernel v2.0 for PIPA(MI PAD6)(NO PRO) is out!

Changelog:
1.Upstreamed to 4.19.297.
2.Implemented MLGRU.
3.Applied some optimizations in teo governor so battery performance is better in idle drainage.

Download link:https://drive.google.com/file/d/1xVv...ew?usp=sharing

[moi12345]

TwistedKernel v3.0 for mi pad 6 normal(Snapdragon 870)(NO PRO)

Changelog:
1.Include KSU.
2.Backported ZSTD compression algorithm
3.Use by default lz4 for zram compression.
4.use dagu usb drivers by default.
5.Kernelsu v0.6.8 included.

Download link:https://drive.google.com/file/d/1KyD...ew?usp=sharing

[moi12345]

TwistedKernel v4.0for MIUI/AOSP is out!(MI PAD 6)(SNAPDRAGON 870)(PIPA)

Changes:
1.Added support for A14(MIUI/AOSP).

Download link:https://drive.google.com/file/d/1g6L...ew?usp=sharing

[moi12345]

TwistedKernel v5.0 balanced is out! (MI PAD 6)(PIPA)(SNAPDRAGON 870)

Changes:
1.iImport nanoistic drivers(smart keyboard drivers from pipa-t-oss)
2.Fixed keyboard not recognized in MIUI/AOSP

Download link:https://drive.google.com/file/d/1-2c...w?usp=drivesdk

[moi12345]

TwistedKernel v6.0 battery version is out!

Changelog:
1.Implement multiple optimizations of cpuidle governor teo.
2.Use 100hz tickless value for tickless system is usefull for minor battery drainage.
3.Focused on battery stability.
4.Inbuilt KSU
5.Other changes

SHA1:b6fb6a00354cfcb0447d5f0639131a52

Download:https://drive.google.com/file/d/1aGH...ew?usp=sharing

[Nanium]

Pon la letra un poco más grande que no se ve casi

[moi12345]

 Cita: Originalmente Escrito por Nanium

Pon la letra un poco más grande que no se ve casi

Lo siento si te molesto, lo pongo grande para que quede claro, pero de todas formas tendre en cuenta tu comentario.

[moi12345]

TwistedKernel v7 battery version is out!

Changelog:
1.Rollback to 4.19.157
2.Inbuilt KSU
3.Implemented samsung tpb+hpb features and implementations for increasing ufs speeds.
4.Compatible with AOSP/android 14.
5.Rebased completly in caf sources
6.Use a tickless value(100hz) for better active drainage consumption.
7.Fixed screen freeze when entering in deep sleep mode
8.Enabled adaptative voltage scaling

Download link:https://drive.google.com/file/d/1G6x...ew?usp=sharing

[Plamb1r]

¿Cómo configurarlo desde Franko? ¿Puedes dar algún manual, por favor?

[haihg321]

Thank you for this awesome works �� I am currently very satisfied with the results. Verry appreciate this.
But I just want to request 1 feature. Can you add Double tap to wake support in the next release version.
Thank you verry much ��

[noboays]

Good work, by the way do u have working custom recovery resources for this device?

[moi12345]

Pronto:

[moi12345]

TwistedKernel v8 for PIPA (mipad6) is out

Changelog:
1.Enable wireguard support.
2.Default zram algorithm compression is lz4.
3.Enabled bbr2 tcp congestion algorithm.
4.Upstream to 4.19.304(latest).

Download link:https://drive.google.com/file/d/1Joe...ew?usp=sharing

[moi12345]

 Cita: Originalmente Escrito por Plamb1r

¿Cómo configurarlo desde Franko? ¿Puedes dar algún manual, por favor?

Hola perdona por contestar tarde.

Lo unico que yo tocaria seria cambiar de congestionador TCP IPV4 hacia bbr2 y cambiar el planificador de entrada y salida a SSG en kernel settings lo tienes.

Un saludo

[moi12345]

 Cita: Originalmente Escrito por haihg321

Thank you for this awesome works �� I am currently very satisfied with the results. Verry appreciate this.
But I just want to request 1 feature. Can you add Double tap to wake support in the next release version.
Thank you verry much ��

Thank you very much.

Its fixed in v8.

Thank you

[byf3332]

when using scene to monitor RAM usage，v8 will lead to blank usage data, and the "MemAvaliabe" data will be a huge number
seem to be lz4 problem

[moi12345]

 Cita: Originalmente Escrito por byf3332

when using scene to monitor RAM usage，v8 will lead to blank usage data, and the "MemAvaliabe" data will be a huge number
seem to be lz4 problem

Okay i am fix in Next build

[Plamb1r]

Doesn’t work touchpad on keyboard, on v8.0. Also some problems with lz4

[moi12345]

Okay thanks for reporting