#81
|
||||
|
||||
Una cuestion.
He hecho un backup desde el clockwormod y me ha generado esto. Supongo que si quiero hacer un restore con mantener esta estructura en el futuro no habría problemas, no ?? saludos
__________________
Gogua SM-G935F
|
Gracias de parte de: | ||
|
#82
|
||||
|
||||
bueno el primer paso bien, pero al realizar el segundo paso para quitarle el triangulo amarillo e flaseado el kernel original de la ke7 y se me a ido el root y ya no me aparece el CMW. que kernel original hay que flasear? es que tengo dos de cuando me hice root. tar grande y otro pequeño que se hacia en el ultimo paso para kitarle el triangulo.
ufff me estoy hacien un lio...... |
#83
|
||||
|
||||
Si tenias una KE7 este es el que tenias que haber metido para quitar el triangulo.
I9100XWKE7_Kernel.tar está en el repositorio
__________________
Gogua SM-G935F
|
Gracias de parte de: | ||
#84
|
||||
|
||||
Cita:
gogua;2315908]Si tenias una KE7 este es el que tenias que haber metido para quitar el triangulo.
I9100XWKE7_Kernel.tar está en el repositorio Si ahora quiero meter la light room cocinada, estando dentro del clockworkmod recovery, i teniendo descomprimida la room en la raiz que seleciono? Apply update from sdcard, install zip from sdcard....? En el caso de que no me gustase, como he hecho un backup le doy a restore y me lo deja tal cual? |
#86
|
||||
|
||||
@gogua
Si ahora quiero meter la light room cocinada, estando dentro del clockworkmod recovery, i teniendo descomprimida la room en la raiz que seleciono? Apply update from sdcard, install zip from sdcard....? En el caso de que no me gustase, como he hecho un backup le doy a restore y me lo deja tal cual? saludos
__________________
Gogua SM-G935F
|
#87
|
||||
|
||||
__________________
Gogua SM-G935F
|
#88
|
||||
|
||||
@gogua
Si ahora quiero meter la light room cocinada, estando dentro del clockworkmod recovery, i teniendo descomprimida la room en la raiz que seleciono? Apply update from sdcard, install zip from sdcard....? En el caso de que no me gustase, como he hecho un backup le doy a restore y me lo deja tal cual? tu has visto en el post de la rom esa que se pueda flasear por CWM? yo creo que no, asi que se sigue flaseando como siempre hasta que la adapte el autor y si lleva dentro el archivo zimage lo normal es que pierdas el rooteo y el CWM de chainfire |
#89
|
||||
|
||||
tate quieto que la vas a liar
tu has visto en el post de la rom esa que se pueda flasear por CWM? yo creo que no, asi que se sigue flaseando como siempre hasta que la adapte el autor y si lleva dentro el archivo zimage lo normal es que pierdas el rooteo y el CWM de chainfire Asi que si la flasheo normalmente perdere el rooteo y el CWM? Mejor me estoy quieto entonces xd |
#91
|
||||
|
||||
__________________
Gogua SM-G935F
|
#92
|
||||
|
||||
TRADUCCION CASERA (1) Make sure you have CF-Root flashed (see the first post). You must have the "CWM Manager" app available. ASEGURATE DE HABER FLASEADO EL KERNEL CF-ROOT, DEBE APARECER EN APLICACIONES CWM MANAGER (2) Make sure you have the same version of CF-Root extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage). EXTRAE EL KERNEL DEL CF ROOT, ES EL ARCHIVO ZIMAGE QUE HAY DENTRO DEL TAR QUE HAY DENTRO DEL ZIP (3) Push the zImage file to /sdcard . It must still be called zImage ! PONLO EN LA SD, EN LA RAIZ PARA NO PERDELO QUE VOLVEREMOS A EL MAS TARDE (4) Find an original Samsung signed stock kernel (preferably from the same stock firmware you have, but it's not terribly important) POR OTRO LADO, BUSCATE EL KERNEL ORIGINAL DE SAMSUNG, A SER POSIBLE LA MISMA NUMERACION QUE EL CF-ROOT QUE HAYAS FLASEADO (5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed) REINICIA EN MODO DOWLOAD (6) Fire up ODIN, and flash the Samsung kernel FLASEALO CON ODIN (7) Boot the device with the stock kernel. CWM Manager will still be available. ARRANCA EL TELEFONO DE NUEVO, EL CWM MANAGER DEBE SEGUIR DENTRO DE APLICACIONES (8) Start CWM Manager, select Flash Kernel, and select the zImage from CF-Root you previously put on your SD-card. The kernel will flash and the device will reboot. INICIA EL CWM MANAGER Y ELIJE FLASH KERNEL, FLASEA EL KERNEL QUE HAS METIDO EN EN LA SD (ESTE ES EL QUE HAS EXTRAIDO DEL PAQUETE Y DEBE SER EL CF-ROOT) (9) You will now notice you no longer have the warning triangle during boot, but you are actually running CF-Root with all it's goodies! UNA VEZ FLASEADO YA NO TIENES QUE VER EL TRIANGULO (10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files) A PARTIR DE AHORA PROCURA FLASEAR LOS KERNELS DESDE EL CWM MANAGER DEJANDO DE LADO ODIN Y EL TRIANGULO NO APARECERA AUNQUE EL CONTADOR DE FLASEOS NO AUTORIZADOS POR SAMSUNG SEGUIRA CONTANDO. LOS KERNELS NO CF-ROOT DEBERAN SOPORTA BUSYBOX PARA PODER SEGUIR FLASEANDO POSTERIORES KERNELS DESDE CWM MANAGER, ES INDISPENSABLE PARA ELLO A grandes rasgos es esto...
__________________
|
#93
|
||||
|
||||
saludos y espero tu respuesta y gracias de antemano
__________________
SIGUEME EN TWITTER: @JAIMEVR76 |
#94
|
||||
|
||||
Metiendo el firm Litening v1.0 que tienes en este mismo sub-foro.
Hay otra forma de ponerlo toqueteando el framework, pero pasaba, preferí meter esa rom, que lleva el root del telefono inluido y funciona muy bien.... http://www.htcmania.com/showthread.php?t=218555 saludos
__________________
Gogua SM-G935F
|
Gracias de parte de: | ||
#95
|
||||
|
||||
Metiendo el firm Litening v1.0 que tienes en este mismo sub-foro.
Hay otra forma de ponerlo toqueteando el framework, pero pasaba, preferí meter esa rom, que lleva el root del telefono inluido y funciona muy bien.... http://www.htcmania.com/showthread.php?t=218555 saludos saludos y gracias x la respuesta
__________________
SIGUEME EN TWITTER: @JAIMEVR76 |
#96
|
||||
|
||||
Efectivamente sigue las instrucciones de xda.
ya sabes ponerlo en modo download y eso antes de conectarlo al pc, no ?? Despues de flashearlo, serás root también. saludos
__________________
Gogua SM-G935F
|
Gracias de parte de: | ||
#97
|
||||
|
||||
Bueno bueno bueno... Lo que es estar uno días sin poder entrar mucho en el foro!!
Entro, y veo que ya tenemos un señor CWM para manejar. Por supuesto que ya me puse manos a la obra, y está instalado y todo correcto. Ahora a seguir probando todo lo que salga, pero cada vez con la vida mas facil o por lo menos mas rápida... Jejeje. Gracias a los que disponen de tiempo para ir adelantando los acontecimientos. Un saludo a todos.
__________________
|
#98
|
||||
|
||||
__________________
SIGUEME EN TWITTER: @JAIMEVR76 |
#99
|
||||
|
||||
|
|
Estás aquí | ||||||
|