[Tutorial] Rootear sk17i 2.3.4 .62 de manera fàcil

[Pacerme]

Hola a todos.
Llevava un par de días con mi nuevo Xperia Mini Pro (antes tenia un X10 Mini Pro).
Por error imperdonable de novato, dejé que el teléfono se actualizara a la última versión nada más conectarlo (a la .62). Luego ví que la única dforma de rooteo de esta versión de firmware era downgradear. Después de mucho buscar encontré la manera de hacerlo en un tutorial de XDA-Developers. Lo quoteo aquí, no es mio, que quede claro!

Si alguien no entiende alguna parte, puesto que está en inglés, que me lo pida, pero se entiende a la perfección.

 Cita:

For 4.0.2.A.0.62 or 4.0.2.A.0.69

To root these two firmware versions, you'll first have to downgrade your phone to 4.0.2.A.0.42 or 4.0.2.A.0.58. Remember: Flashing firmware may void your warranty!

Your data will be lost throug this proceed, save it using for example Android Assistant, which can backup the .apk (but the data will be lost). Save contacts and maybe sms.

MAKE SURE PC COMPANION OR SONY UPDATE SERVICE ISN'T RUNNING IN BACKGROUND WHILE YOU ARE FLASHING!!! DON'T USE THIS METHOD IF YOUR BOOTLOADER IS UNLOCKED, OTHERWISE YOUR DEVICE WILL BRICK!! (Unlocked bootloader can't do updates over the air!)

First you have to flash the 4.0.2.A.0.42. For that you download and install flashtool from here.
The firmware you can download from this thread by benji.berg or here by someguyfromhell.
Thx for sharing the firmware with us!
Download the 4.0.2.A.0.42 for your device!

After installation you open the windows explorer and go to the downloaded file. If it is a 7z or zip archive you unpack it, that you have a .ftf file.


Now you go to the flashtool installation folder. There you open the drivers folder and install the drivers.

In the flashtool -> drivers folder is the drivers installer


Now we go to the downloaded .ftf file and copy it to the firmware folder of flashtool

Programs -> Firmwares:


Then we launch flashtool


Now, to flash a new firmware, we click on the flash


In the Mode Selector you choose Flashmode and click ok


In the next step you choose the firmware and you mark wipe data and wipe cache. Just mark it like in the picture. If you are sure all is marked right, you click ok


Now you have to turn off your device. Make sure the battery is more than 75%. You hold the volume down and while holding volume down you connect your device to pc. The green led will light up and flashtool will automaticly flash the new firmware.
DON'T DISCONNECT DEVICE FROM PC WHILE THE FLASHING PROCESS!!

Here's the flashing log:

 20/019/2012 11:19:39 - INFO  - <- This level is successfully initialized
20/019/2012 11:19:39 - INFO  - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
20/019/2012 11:19:39 - INFO  - You can drag and drop ftf files here to start flashing them
20/019/2012 11:19:44 - INFO  - Device disconnected
20/019/2012 11:19:49 - INFO  - Selected Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf
20/019/2012 11:19:49 - INFO  - Preparing files for flashing
20/019/2012 11:19:50 - INFO  - Please connect your device into flashmode.
20/019/2012 11:19:55 - INFO  - Device connected in flash mode
20/019/2012 11:19:55 - INFO  - Opening device for R/W
20/019/2012 11:19:55 - INFO  - Reading device information
20/019/2012 11:19:55 - INFO  - Phone ready for flashmode operations.
20/019/2012 11:19:55 - INFO  - Start Flashing
20/019/2012 11:19:55 - INFO  - Flashing loader
20/019/2012 11:19:58 - INFO  - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED / IMEI : xxx
20/019/2012 11:19:58 - INFO  - Flashing kernel.sin
20/020/2012 11:20:01 - INFO  - Flashing fota0.sin
20/020/2012 11:20:01 - INFO  - Flashing fota1.sin
20/020/2012 11:20:01 - INFO  - Flashing adsp.sin
20/020/2012 11:20:04 - INFO  - Flashing amss_fs.sin
20/020/2012 11:20:04 - INFO  - Flashing apps_log.sin
20/020/2012 11:20:04 - INFO  - Flashing amss.sin
20/020/2012 11:20:14 - INFO  - Flashing system.sin
20/022/2012 11:22:17 - INFO  - Flashing userdata.sin
20/022/2012 11:22:19 - INFO  - Flashing cache.sin
20/022/2012 11:22:20 - INFO  - Ending flash session
20/022/2012 11:22:20 - INFO  - Flashing finished.
20/022/2012 11:22:20 - INFO  - Please wait. Phone will reboot
20/022/2012 11:22:20 - INFO  - For flashtool, Unknown Sources and Debugging must be checked in phone settings

Check your log first before you restart phone. If there are no errors, go on.

Then you have to restart your phone. When it has started go through the setup assistant.

You are now on 4.0.2.A.0.42 or 4.0.2.A.0.58 firmware, so you go to next step to root:

1. For 4.0.2.A.0.42 or 4.0.2.A.0.58 firmware:

Flashtool method

This is a very easy method to root your phone. For this you download flashtool from here and install it.

When it is installed, you launch it.


Now you go on your phone and go to Settings -> Applications -> and enable unknown sources.


After that, you go to Settings -> Applications -> Development -> and enable usb debugging.


In the end you go to Settings ->Sony Ericsson ->Connectivity ->USB connection mode ->MSC


Now you connect your device to pc and flashtool will automaticly recognize it.


Now if your device is connected and recognized, we can begin with the rooting process:

For that we click on the open padlock here:


Now it will root your device automaticly

Here's the log:

 19/057/2012 22:57:08 - INFO  - <- This level is successfully initialized
19/057/2012 22:57:08 - INFO  - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
19/057/2012 22:57:08 - INFO  - You can drag and drop ftf files here to start flashing them
19/057/2012 22:57:13 - INFO  - Device connected with USB debugging on
19/057/2012 22:57:14 - INFO  - Connected device : SK17
19/057/2012 22:57:14 - INFO  - Installed version of busybox : N/A
19/057/2012 22:57:14 - INFO  - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
19/058/2012 22:58:16 - INFO  - Pushing C:\Program Files (x86)\Flashtool\.\devices\SK17\busybox\1.19.0\busybox to /data/local/tmp/busybox
19/058/2012 22:58:17 - INFO  - Pushing C:\Program Files (x86)\Flashtool\.\custom\root\zergrush.tar.uue to /data/local/tmp
19/058/2012 22:58:17 - INFO  - Running part1 of Root Exploit, please wait
19/058/2012 22:58:42 - INFO  - Waiting for device
19/058/2012 22:58:42 - INFO  - Device disconnected
19/058/2012 22:58:44 - INFO  - Device connected with USB debugging on
19/058/2012 22:58:45 - INFO  - Running part2 of Root Exploit
19/058/2012 22:58:45 - INFO  - Running rootit2
19/058/2012 22:58:49 - INFO  - Finished!.
19/058/2012 22:58:49 - INFO  - Root should be available after reboot!
19/058/2012 22:58:50 - INFO  - Device disconnected
19/058/2012 22:58:56 - INFO  - Log written to C:\Program Files (x86)\Flashtool\flashtool_2012-08-19_10-57-08.log
19/059/2012 22:59:10 - INFO  - Device connected with USB debugging on
19/059/2012 22:59:10 - INFO  - Connected device : SK17
19/059/2012 22:59:10 - INFO  - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
19/059/2012 22:59:10 - INFO  - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
19/059/2012 22:59:32 - INFO  - Remounting system read-write
19/059/2012 22:59:34 - INFO  - Installing toolbox to device...
19/059/2012 22:59:34 - INFO  - Pushing C:\Program Files (x86)\Flashtool\custom\root\ftkit.tar to /data/local/tmp
19/059/2012 22:59:35 - INFO  - Running installftkit  as root thru sysrun
19/059/2012 22:59:35 - INFO  - Root Access Allowed

Gratulation! Now you have a rooted xperia 2011 device!

When your device is rooted, you connect your xperia via wifi with the internet. Now you start the update center (on your phone) and search for updates. It will find the update to 4.0.2.A.0.62 which you install then over the air (ota=via wlan, not connect to pc).




Now you click on download and then install it.

After reboot you have a rooted 4.0.2.A.0.62 firmware!

Una vez hecho esto, veréis que falla algun carácter del teclado (el signo ? está en otro lugar, la ç no está, etc...). Esto es devido a que no es el Iberia, sinó que es el firmware global. Pero muy sencillo, tenéis que seguir el tuto de Fantas94 de este foro y lo solucionaréis: http://www.htcmania.com/showthread.php?t=328320ç

Espero que os haya servido como a mi!

[Pacerme]

Por cierto, este tuto que os he puesto arriba es una extracción de este hilo:
http://forum.xda-developers.com/show....php?t=1842366

[TheTribu11]

 Cita: Originalmente Escrito por Pacerme

Bien, me he puesto a buscar por xda y he encontrado este hilo:
http://forum.xda-developers.com/show....php?t=1842366

Voy a tratar de seguirlo a ver si consigo downgradear bien a la versión .42, hacer root y luego actualizar a la .62 sin que me quede con un brick de móvil. Porque me imagino que si haces root en la version .42, al actualizar a la última se mantendrà el root, no???
Si es que no y lo tengo mal entendido, porfavor, que alguien me avise antes de liarme a hacer todo esto...

Si nadie me dice nada y lo consigo ya explicaré cómo lo he hecho porque estoy seguro que muchos se encuentran en mi misma situación...

Si actualizas mediante wifi si mantienes el root, no lo hagas mediante el pc companion ya que de esa manera si perderás el root

Enviado desde mi SK17i con ROM Veloz46 GB 2.3.4

[Pacerme]

Sólo decir que me funcionó a la perfección. Ahora veo que el superuser no me funciona bien al cabo de unos días. No sé a qué es debido.... pero el root explorer me dice que no soy root, y a mi me sigue saliendo el superuser. No se entiende mucho, la verdad.
Voy a volver a hacer todos los pasos a ver... pero tranquilos que va muy bien el tutorial, lo podéis seguir!

[OpXim]

y para el st15i, el mini normal?

[gerdelas]

super su no quites el modo depuracion ^^ eso me paso a mi el super usuario necesita que tengas siempre el modo depuracion activado XD

[Feerr_22]

funciona para sk17a?