#61
|
||||
|
||||
Carga un poco la maquina y veras... Tal vez la 62 vaya mejor que la 61 o 60 que probé yo hace un tiempo; la que si que iba fina era la 47.. pero ceastel no parece interesar dar soporte a CM11 :/ en fin, sus motivos tendra. Tal vez sea el mejor Kernel para CM10.1/10 y posiblemente Stock.
|
|
#62
|
||||
|
||||
Por cierto! Fíjate que la ROM que compilaste... no trae Pie, ni van algunas opciones, otras hacen cosas raras... y hay menús vacíos. Seria interesante lo pudieras resolver con una ACT por que la ROM si funcionase correctamente seria muy bonita.
|
#63
|
||||
|
||||
de eso vienen las sources de xenon, estamos arreglando los maximos posibles y el del settings igual
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
#64
|
||||
|
||||
Tengo una pregunta y no se si se ha respondido ya.
Que diferencias hay entre CM11 y AOSP?? Quiero decir, ademas de que el código es mas puro y eso. Realmente donde esta la diferencia?? En rendimiento?? En duración de batería?? En estabilidad?? O no hay mucha pero los pro son la personalización?? Es que veo ROMS similares y como tengo titanium gratuito tengo que ir restaurando una por una las apps, y aventurarme así nada mas... pero capaz y me estoy perdiendo algo bueno. |
#65
|
||||
|
||||
Ya tenemos nueva release, por lo visto la sacan cada dos semanas:
URL: http://xenonhd.com/xenonhd-build-5-changelog XenonHD Build 5 Changelog Posted by iceandfire on Apr 1, 2014 in Change Log | 0 Comments Project name: platform_manifest •iceandfire – Track BluetoothExt from CM •iceandfire – Track new samsung props •iceandfire – jflte •TheBr0ken – Sync -c •iceandfire – Track device/qcom/common from CM •TheBr0ken – This is a device dependency •TheBr0ken – fix a few derp •pcarenza – Track netd from cm •pcarenza – Track recovery from omni •pcarenza – Track libcore from slim •iceandfire – Track sony_rhine-common •iceandfire – Track sony blobs •iceandfire – Add honami Project name: bionic •synergydev – libm: sync with upstream freebsd Project name: build •Ricardo Cerqueira – Fix the alternate recovery inclusion logic •Steve Kondik – build: Add alternate recovery to pathmap •Brint E. Kriebel – Store the value from BOARD_CUSTOM_BOOTIMG_MK to a file •Brint E. Kriebel – Store the value from TARGET_OTA_ASSERT_DEVICE to a file •Ricardo Cerqueira – Store the path to the ota file generator where it can be reused •Ricardo Cerqueira – recovery: Always allow the CM release key •Ricardo Cerqueira – Sign final packages with a different key if requested •Koushik Dutta – add adb to the disttools •synergy – gettop: fix symlink detection •Steve Kondik – [HAX] Allow per-target dtbTool •Ying Wang – Increase the maximum javac heap size. •TheBr0ken – Make it Dirty Project name: flo •Dees_Troy – TWRP-ify (Squashed commits) Project name: platform_device_asus_grouper •Ethan Yonker – Add TWRP fstab •Jens Andersen – Add initial TWRP config Project name: device_asus_tilapia •Jens Andersen – Add initial twrp support Project name: hammerhead •Dees Troy – hammerhead: TWRP-ify Project name: device_lge_mako •Chad Cormier Roussel – Fix TWRP-ify commit This will also fix sounds problems. Thanks @Entropy512 •Andrew Dodd – mako: TWRP-ify CyanogenMod Project name: android_device_qcom_common •Steve Kondik – qcom: Add crypto helper for ODE •Giulio Cervera – common-qcom: enable custom module name extension •Steve Kondik – common-qcom: Make QC PowerHAL opt-in •Steve Kondik – common-qcom: Add PowerHAL Project name: android_device_samsung_jflte •iceandfire – XenonHD dependencies •iceandfire – Overlay cleanup •iceandfire – Build with TWRP •Dan Pasanen – add jflteusc to assert Project name: android_device_samsung_msm8960-common •iceandfire – Cleanup •Steve Kondik – msm8960: Add fix for stupid preferred preview size bug •Dave Daynard – msm8960-common: I don’t want to see your face Project name: android_device_samsung_qcom-common •Steve Kondik – qcom-common: TARGET_POWERHAL_VARIANT = cm •Steve Kondik – qcom-common: Don’t use CM PowerHAL for all targets Project name: platform_device_samsung_tuna •Grarak – add twrp fstab and recovery.rc •iceandfire – TWRP Project name: android_device_sony_honami •Chirayu Desai – Use “include” instead of “-include” wherever appropriate •iceandfire – Update dependencies •iceandfire – Don’t need this anymore •iceandfire – XenonHD dependencies Project name: android_device_sony_rhine-common •Ethan Chen – rhine: properly set up QC props •Giulio Cervera – rhine: proper check of bt address •Giulio Cervera – rhine: bt: disable clock-sharing •Giulio Cervera – rhine: add selinux policy •Yashdev Singh – Telephony: Implementation of IWLAN. •Jaime Lopez – Add TD-SCDMA support •Rakesh Pallerla – Support Additional SIM Depersonalizations. •Srikanth Chintala – Interface changes to support Multi SIM functionality. •Srikanth Chintala – Add Multi RILD support. •Naveen Kalla – STK Call Control feature implementation. •Naveen Kalla – Support reading data profiles from OMH cards •Giulio Cervera – rhine: add radish blob •Giulio Cervera – rhine: fix mic on speakerphone •Giulio Cervera – rhine: enable dual mic and update mixer path •Chirayu Desai – Use “include” instead of “-include” wherever appropriate •Chirayu Desai – Add init extension library for s1boot version •Chirayu Desai – Support C6802 and C6902 with a post-install script •Chirayu Desai – rhine: use dtbToolCM •iceandfire – Fix TWRP console word wrap and scrolling for rhine-common devices Project name: bluedroid •Ricardo Cerqueira – Fix building for USB CyanogenMod Project name: Superuser •Ondrej Zima – Superuser: CS translation •Gustavo – Superuser: PT-BR Translations •pylerCM – Superuser: SK translations •Lorenzo M – Superuser: ES translations •Jacob Overgaard Madsen – Superuser: DA translation CyanogenMod Project name: sepolicy •Robert Craig – Introduce asec_public_file type. Project name: frameworks_base •Matthias Freund – Fix: onBoot brightness •Anu6is – Fix: Graphics error when switching to recents using Pie controls •Anu6is – Fix: SysUi crash on Pie recents •Kelly – Add lockscreen rotation as an optional rotation setting (1/2) •D4rKn3sSyS – Frameworks: Add in-the-spot user preference dialog •Peter Carenza – Make swipe to switch default! •BigBrother1984 – PIE: Fix random showing of navbar when swiping from top. •Peter Carenza – Revert “Little fix for swipe to switch” •Peter Carenza – PIE 2.0 – credit (and lots of it) goes to the AOSPA team! •iceandfire – Fix Power connect/disconnect notification •Der-Schubi – Halo: Add master switch to disable Halo (1/2) -Port master switch from @Der-Schubi. -Fixed Halo not showed at first notifiction pulldown. •Ricky Salinas – QS: Flip drawables used by Immersive hide nav/status bar only modes •Steve Kondik – quickboot: Only enable QuickBoot if package is installed •Yevgen Pronenko – Do not show Home behind full screen activity •Peter Carenza – Shorten app switch delay time •Kun Liang – Squashed commit of QuickBoot feature from Qualcomm •aways – Active display: Fix for HDPI devices. •Peter Carenza – Fix Tethering reboot on exception •iceandfire – Fix •Sam Mortimer – [1/2] Power connect/disconnect notification support •Raju Yadav – Avoid SystemUI crash due to NPE •nuclearmistake – ActiveDisplay: fix possible add>remove>add(nothing happens) condition •Matthew Qin – Alarm: Add one more RTC alarm type for poweroff alarm. •TheBr0ken – Speed up default progressbar speed •Jens Gulin – Solve three memory leaks related to PatchCache •ByteHamster – Base: NFC toggle •Matthias Freund – Fix: onBoot brightness •BigBrother1984 – Revert “Immersive: Fix black bar in some games” •Peter Carenza – Fix so that the toggles change the string •Peter Carenza – Add TRDS Tile (thanks Slim) Project name: native •bdeng3X – GraphicProducerWrapper may return false transact status Project name: android_kernel_google_msm •Nirmal Abraham – MDP: correct clock calculation logic for up-scaling scenario •Mike Galbraith – sched,cgroup: Fix up task_groups list •Stephen Boyd – msm: clock-rpm: Make rpm clocks sleeping clocks •myfluxi – cpufreq: Fix broken uevents for cpufreq governor and cpu devices •Steve Kondik – drivers: cpufreq: Send a uevent when governor changes •Paul E. McKenney – rcu: Use smp_hotplug_thread facility for RCUs per-CPU kthread •Thomas Gleixner – rcu: Yield simpler •Venkatesh Yadav Abbarapu – msm: dma: Refactored driver to avoid queuing of cmds in workq. •Utsab Bose – msm: dma: Moving queue_work() function within spinlock •Eric Dumazet – softirq: reduce latencies •Thomas Gleixner – softirq: Use hotplug thread infrastructure •Vijay Ganti – cpufreq: interactive: Fix null pointer dereference in interactive governor Project name: android_kernel_lge_hammerhead •Ricardo Cerqueira – leds: At disable, set the trigger to default instead of wiping it •Dennis Rassmann – drivers/input/touchscreen/sweep2wake: if s2s_only is true, opt out early •Dennis Rassmann – drivers/input/touchscreen/sweep2wake: add flo/deb definitions •Dennis Rassmann – drivers/input/touchscreen/sweep2wake: add mako definitions •Dennis Rassmann – drivers/input/touchscreen/sweep2wake: Fix compilation with earlysuspend •Dennis Rassmann – drivers/input/touchscreen/doubletap2wake: Fix compilation with earlysuspend •Dennis Rassmann – s2w: add s2s only override •Dennis Rassmann – dt2w: fix triple tap to wake occuring sometimes •Dennis Rassmann – defconfig: update & enable dt2w •Dennis Rassmann – s2w: abort on multitouch events early •Dennis Rassmann – sweep2wake: remove distinction between S2W and DT2W defines •Dennis Rassmann – sweep2wake: update header information •Dennis Rassmann – sweep2wake/doubletap2wake/touchscreen: Prepare for dt2w •Dennis Rassmann – s2w: rename version file so we don’t conflict with dt2w, driver versions, etc •Dennis Rassmann – touch_synaptics: don’t wait for irq events to be handled, just disable the irq •Dennis Rassmann – touch_synaptics: remove wakeup procedure for i2c device •Dennis Rassmann – touch_synaptics_ds5: don’t wait for irq events to be handled, just disable the irq •Dennis Rassmann – touch_synaptics_ds5: remove wakeup procedure for i2c device •Dennis Rassmann – defconfig: compile with s2w •Dennis Rassmann – sweep2wake: cleanup header file •Dennis Rassmann – sweep2wake: disabled as default, enable it over apps/sysfs •Dennis Rassmann – touch_synaptics_ds5: i2c_read: auto retry 10 times before erroring out The i2c devices we are connecting to may not be ready yet, or just busy. Retry with a 10ms pause in order to still obtain touch data. This improves overall touch data robustness, but the main thing it does: WE CAN FINALLY GET TOUCH DATA IN SUSPEND ALL THE TIME. •Dennis Rassmann – touch_synaptics: i2c_read: auto retry 10 times before erroring out The i2c devices we are connecting to may not be ready yet, or just busy. Retry with a 10ms pause in order to still obtain touch data. This improves overall touch data robustness, but the main thing it does: WE CAN FINALLY GET TOUCH DATA IN SUSPEND ALL THE TIME. •Dennis Rassmann – touch_synaptics: bring on par with touch_synaptics_ds5 •Dennis Rassmann – sweep2wake: we no longer need irq_wake. remove it. Also clean up variable declariation to save some space •Dennis Rassmann – sweep2wake & touchscreens: replaced flawed irq_wake procedures with linux functions Also init device wakeup in init to be able to use those functions in the first place •Dennis Rassmann – sweep2wake: massive update, bring on par with s2w2 except algorithm •Dennis Rassmann – sweep2wake: disable debug •Dennis Rassmann – mdss_dsi_panel: keep the panel gpio active and don’t trigger a reset •flar2 – [PATCH] mdss_dsi: do not power down panel when sweep2wake is enabled In order to detect touches during suspend, the panel must be powered on. When sweep2wake is enabled, change one of the panel-off-cmds in mdss_dsi_panel.c from 0×10 to 0×11. •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: fix epic c&p fails for irq_wake indicator •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics: patch with sweep2wake hooks as well •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: add missing irq_wake controls and fix c&p typo •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: re-add android_touch kobj •Dennis Rassmann – sweep2wake: add irq_wake indicator •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: add screen suspend indicator •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: add reset code on finger release •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: disable suspend if sweep2wake is enabled •Dennis Rassmann – sweep2wake: backport per device settings from sweep2wake2 (like pwr btn choice too) •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5.c: No suspend irq •Dennis Rassmann – drivers/input/touchscreen/touch_synaptics_ds5: add is_single_touch & s2w detection hook •Dennis Rassmann – sweep2wake: add qpnp-power-on hooks for the power key •Dennis Rassmann – add sweep2wake source files •Dennis Rassmann – add doubletap2wake, completely rewritten on the s2w template •Lars Greiss – push kernel version Project name: kernel_lge_mako •Josue Rivera – Update defconfig for 3.4.83 •Greg Kroah-Hartman – Linux 3.4.83 •Emil Goode – net: asix: add missing flag to struct driver_info •Lucas Stach – net: asix: handle packets crossing URB boundaries •Mark Cave-Ayland – rtlwifi: Fix endian error in extracting packet type •Emmanuel Grumbach – iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 series •Stanislaw Gruszka – iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULL •Johannes Berg – iwlwifi: dvm: don’t send BT_CONFIG on devices w/o Bluetooth •Johannes Berg – iwlwifi: always copy first 16 bytes of commands •Johannes Berg – iwlwifi: handle DMA mapping failures •Emmanuel Grumbach – iwlwifi: don’t handle masked interrupt •Johannes Berg – iwlwifi: protect SRAM debugfs •Johannes Berg – iwlwifi: fix flow handler debug code •Takashi Iwai – ALSA: asihpi: Fix unlocked snd_pcm_stop() call •Takashi Iwai – staging: line6: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ASoC: s6000: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ALSA: usx2y: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ALSA: ua101: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ALSA: 6fire: Fix unlocked snd_pcm_stop() call •Takashi Iwai – ALSA: atiixp: Fix unlocked snd_pcm_stop() call •Fabio Estevam – ASoC: sglt5000: Fix the default value of CHIP_SSS_CTRL Project name: android_kernel_samsung_jf •myfluxi – cpufreq: Fix broken uevents for cpufreq governor and cpu devices Project name: android_kernel_sony_msm8974 •Chirayu Desai – Revert some commits, fixes SoD CyanogenMod Project name: android_packages_apps_Apollo •Ethan Chen – Apollo: Update default album art •Ethan Chen – Apollo: Avoid crash when attempting to load many items •Ethan Chen – Apollo: Use correct preference keys for artwork download Project name: Bluetooth •sahranbay – Bluetooth: UG translation CyanogenMod Project name: android_packages_apps_CMFileManager •Francesco – CMFileManager: IT translations •Jacob Overgaard Madsen – CMFileManager: DA translation •Ondrej Zima – CMFileManager: CS translation •elektroschmock – CMFileManager: Update DE translation •Eddy Witkamp – CMFM: NL translation Project name: Camera2 •Lars Greiss – Camera2: if camera HAL does not return valid picture formats do not show wrong defaults Project name: DeskClock •Peter Carenza – Revert “Alarm: Use dedicated alarm type for poweroff alarm.” •Peter Carenza – Revert “DeskClock: Add back switch to profile” •Jacob Overgaard Madsen – DeskClock: DA translation •Ondrej Zima – DeskClock: CS translation Project name: packages_apps_ROMSettings •iceandfire – Add lockscreen rotation as an optional rotation setting (2/2) •Peter Carenza – RS: Make Swipe to Switch default! •iceandfire – Halo: Add master switch to disable Halo (2/2) •TheBr0ken – update custom progressbar to more of a stock value •iceandfire – Notification Reminder Interval (2/2) Project name: Settings •Anu6is – Settings: On-the-spot preference clear option •Zhang Fang – Settings: Add screen color settings •iceandfire – Fix Power connect/disconnect notification support •Kun Liang – QuickBoot: enable QuickBoot Settings UI •iceandfire – [2/2] Power connect/disconnect notification support •TheBr0ken – Update custom_strings.xml Project name: LatinIME •iceandfire – Revert “locatePreviewPlacer based on window not screen” Project name: DownloadProvider •Anu6is – DownloadNotifier: Standardize play store and browser downloads Project name: Telephony •h3llrais3r – Ported my low-incall volume fix from CM-10.2 to CM-11.0 Project name: platform_manifest •iceandfire – Track BluetoothExt from CM •iceandfire – Track new samsung props •iceandfire – jflte •TheBr0ken – Sync -c •iceandfire – Track device/qcom/common from CM •TheBr0ken – This is a device dependency •TheBr0ken – fix a few derp •pcarenza – Track netd from cm •pcarenza – Track recovery from omni •pcarenza – Track libcore from slim •iceandfire – Track sony_rhine-common •iceandfire – Track sony blobs •iceandfire – Add honami Project name: core •Peter Carenza – Revert “update minui library call” Project name: proprietary_vendor_motorola •dhacker29 – msm8226: Build qcom power hal Project name: vendor_samsung •iceandfire – Initial props for crespo, jflte, maguro, toro and toroplus This entry was posted on Tuesday, April 1st, 2014 at 3:22 pm You can notice any resposnes to this entry through the RSS 2.0 feed. Posted in: Change Log |
#66
|
||||
|
||||
Si el pc no me da problemas saco hoy la build
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
Los siguientes 2 usuarios han agradecido a infernape763 su comentario: | ||
#67
|
||||
|
||||
Ah, mira... estaría bien ya que luego hasta entorno al día 15 no habrá release. Esperemos que se haya solucionado todos esos problemas que trae la build anterior.
|
#68
|
||||
|
||||
Y ojo he dicho si el pc no me da problemas por que tengo problemas con la gráfica (es integrada) y como se recaliente peta el pc y adiós build
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
#69
|
||||
|
||||
Chavales a soplar la pc de infer.
__________________
Cualquiera puede errar, pero sólo el necio persevera en su falta.
|
Gracias de parte de: | ||
#70
|
||||
|
||||
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
#71
|
||||
|
||||
Entiendo, si las maquinas cuando quieren dan bien la brasa. Referente a la ROM... Ya te lo dije el otro día... opciones que no van o no aparecen, etc... que este en inglés únicamente no me di cuenta pues yo lo utilizo en ese idioma el sistema.
|
#72
|
||||
|
||||
Mmm... Raro pero estarán solucionados (creo)
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
#73
|
||||
|
||||
Funcionara? XD
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
#75
|
||||
|
||||
|
#76
|
||||
|
||||
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
Gracias de parte de: | ||
#77
|
||||
|
||||
En vez de soplar las velas soplale fuerte al pc...
Felicidades campeón ;).
__________________
|
Gracias de parte de: | ||
#78
|
||||
|
||||
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
Los siguientes 3 usuarios han agradecido a infernape763 su comentario: | ||
#79
|
||||
|
||||
Que hoy es tu cumpleaños?? Felicidades inferna!!! Pues deja de lado esa ROM y vete a tomar unas cervezas
PD. Por nuestro bien, mejor no me hagas caso Tenía un fallo "despertando" la pantalla con las teclas de volumen al usar reproductor de música, pero se arregló desmarcando la opción de adelantar/regresar pista con las teclas de volumen... por lo demás al momento muy bien, no da los cortos de sonido reproduciendo música al bloquear y desbloquear como me pasaba con la ProBam |
Gracias de parte de: | ||
|
#80
|
||||
|
||||
Que hoy es tu cumpleaños?? Felicidades inferna!!! Pues deja de lado esa ROM y vete a tomar unas cervezas
PD. Por nuestro bien, mejor no me hagas caso Tenía un fallo "despertando" la pantalla con las teclas de volumen al usar reproductor de música, pero se arregló desmarcando la opción de adelantar/regresar pista con las teclas de volumen... por lo demás al momento muy bien, no da los cortos de sonido reproduciendo música al bloquear y desbloquear como me pasaba con la ProBam pues creo que estara ya arreglado
__________________
COCINERO DEL HUAWEI ASCEND G510-Y300/HUAWEI ASCEND G600/HUAWEI ASCEND G630/SAMSUNG GALAXY S3 Y XPERIA Z1 SEGUIDME EN TWITTER: @infernape763 |
Gracias de parte de: | ||
Estás aquí | ||||||
|