|
ROMs y desarrollo Asus Transformer Pad 300 ROMs y desarrollo Asus Transformer Pad 300 |
|
Herramientas |
#1
|
||||
|
||||
TeamWin Recovery - Recovery Tactil para la TF300T
TeamWin Recovery, es un recovery Tactil super chulo y super facil de instal·lar.
Post en XDA: http://forum.xda-developers.com/show....php?t=1672108 Version para TF300T pagina oficial: http://teamw.in/project/twrp2/97 Para instalarlo es super facil (HAY QUE TENER ROOT, sino NAINAI) : Si quereis insta·larlo i aun no teneis root, seguid el metodo debugfs, teneis un tutorial aquí mismo: http://www.htcmania.com/showthread.php?t=404315 (gracias a tueurises)
Luego tendremos este bonito recovery instalado: Y ya ta, no hace falta ni fastboot ni siquiera conectar la tablet al PC, todo por wifi i automatico. Flis flas i recovery instalao A mi me ha funcionado perfecto y el recovery es una chulada, todo tactil. PD: Gracias a davidshaper por la recomendación y los links! Última edición por DaWeIII Día 13/07/12 a las 09:43:31. |
|
#2
|
||||
|
||||
Buen aporte, ira bien para muchos ya q parece q con el cwr la gente tiene problemas
Enviado desde mi Galaxy Nexus usando Tapatalk 2
__________________
[i]
I'm a fucker flasher!
|
#3
|
||||
|
||||
Un par de preguntas tontas: Hace falta desbloquear el bootloader o con tener root es suficiente??
Y la segunda: con este recovery se pueden meter ROMs cocinadas o hay que hacer algo más para flashear una ROM no oficial?? Un saludo. |
#4
|
||||
|
||||
Enviado desde mi Galaxy Nexus usando Tapatalk 2
__________________
[i]
I'm a fucker flasher!
|
#7
|
||||
|
||||
__________________
[i]
I'm a fucker flasher!
|
#8
|
||||
|
||||
Bueno, hecho root, desbloqueado bootloader, puesto nuevo recovery e instalado rom Hydro-ponic. Tiene buena pinta, sólo espero que no le pase nada a la tablet o me dará algo por el tema de la garantía.
Ya sólo falta que alguien sea capaz de revertir el desbloqueo del bootloader para que sea perfecto. Un saludo y gracias por el aporte. |
#9
|
||||
|
||||
A nivelde software con el recovery estas cubierto..
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2
__________________
[i]
I'm a fucker flasher!
|
#11
|
||||
|
||||
El goo me da error en el MD5 y no lo instala por que puede ser??
|
#12
|
||||
|
||||
tienes que ser root i con el recovery abierto, asegurate de las dos cosas
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2 |
#13
|
||||
|
||||
Eso ya lo tengo echo y me sigue dando error en la descarga de MD5, no se por que.
Gracias y saudos. |
#14
|
||||
|
||||
pues entonces si que no se que puede ser, es que ahora tengo el otro recovery, que me va mejor que este, por costumbre
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2 |
#15
|
||||
|
||||
Gracias por responder davidshaper pero e leido en XDA que este recovery da problemas al hacer nand-droid y al final e instalado el de toda la vida, siguiendo el tuto de tueurises.
Gracias a los 2. |
#16
|
||||
|
||||
Hola.
Me ha sucedido que, burro de mi, he formateado los datos con el TWRP y no tengo ya el zip de la ROM a instalar en la SDcard, ni sistema operativo con el que arrancar... ¿Hay algún modo de iniciar la tablet?. ¿Es posible que lea desde el TWRP una tarjeta externa donde meterle la ROM? Gracias, un saludo. Última edición por kalatravo Día 23/07/12 a las 12:45:36. |
#17
|
||||
|
||||
Disculpen la insistencia, pero no logro salir del modo TWRP. ¿Alguna solución posible?. Lo agradecería, la verdad es que no se si me he cargado el cacharro...
Esto es lo que me sale por el ADB que llevo la mañana empollandome: e returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is r unning. -s <serial number> - directs command to the USB device or emulator w ith the given serial number. Overrides ANDROID_SERI AL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. devices - list all connected devices connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this command with no additional arguments will disconnect from all connected TCP/IP devic es. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> -- iv <hex-encoded iv>] <file> - push this package file to the device and instal l it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data ) ('-s' means install on SD card instead of inter nal storage) ('--algo', '--key', and '--iv' mean the file is encrypted already) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories ) adb bugreport - return all information from the device that should be included in a bug report. adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy stem] [<packages...>] - write an archive of the device's data to <file> . If no -f option is supplied then the data is wr itten to "backup.ab" in the current directory. (-apk|-noapk enable/disable backup of the .apks themselves in the archive; the default is noapk.) (-shared|-noshared enable/disable backup of the device's shared storage / SD card contents; the defau lt is noshared.) (-all means to back up all installed applicatio ns) (-system|-nosystem toggles whether -all automat ically includes system applications; the default is to inclu de system apps) (<packages...> is the list of applications to b e backed up. If the -all or -shared flags are passed, then t he package list is optional. Applications explicitly g iven on the command line will be included even if -nosys tem would ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup archive adb help - show this help message adb version - show version num scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb status-window - continuously print device status for a specifie d device adb remount - remounts the /system partition on the device re ad-write adb reboot [bootloader|recovery] - reboots the device, optionally into the boo tloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on th e specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be u pdated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync , sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes prior ity over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these de bug tags are printed. C:\Users\LUISMI>adb usb error: device not found C:\Users\LUISMI>adb restart Android Debug Bridge version 1.0.29 -d - directs command to the only connected USB devic e returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is r unning. -s <serial number> - directs command to the USB device or emulator w ith the given serial number. Overrides ANDROID_SERI AL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. devices - list all connected devices connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this command with no additional arguments will disconnect from all connected TCP/IP devic es. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> -- iv <hex-encoded iv>] <file> - push this package file to the device and instal l it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data ) ('-s' means install on SD card instead of inter nal storage) ('--algo', '--key', and '--iv' mean the file is encrypted already) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories ) adb bugreport - return all information from the device that should be included in a bug report. adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy stem] [<packages...>] - write an archive of the device's data to <file> . If no -f option is supplied then the data is wr itten to "backup.ab" in the current directory. (-apk|-noapk enable/disable backup of the .apks themselves in the archive; the default is noapk.) (-shared|-noshared enable/disable backup of the device's shared storage / SD card contents; the defau lt is noshared.) (-all means to back up all installed applicatio ns) (-system|-nosystem toggles whether -all automat ically includes system applications; the default is to inclu de system apps) (<packages...> is the list of applications to b e backed up. If the -all or -shared flags are passed, then t he package list is optional. Applications explicitly g iven on the command line will be included even if -nosys tem would ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup archive adb help - show this help message adb version - show version num scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb status-window - continuously print device status for a specifie d device adb remount - remounts the /system partition on the device re ad-write adb reboot [bootloader|recovery] - reboots the device, optionally into the boo tloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on th e specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be u pdated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync , sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes prior ity over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these de bug tags are printed. Última edición por kalatravo Día 23/07/12 a las 15:07:34. |
#18
|
||||
|
||||
Disculpad la insistencia, a ver si alguien puede darme una solución. Mi Asus T300 se queda en el logo de inicio, con "The device is unlocked" en la parte izquierda. Le instalé el CWM, y puedo acceder al recovery pero no me instala desde el zip. ¿Sabeis si hay alguna esperanza de revivirla desde el recovery?. Por lo que llevo leido, es posible que me cargara la partición y el bootloader...
Gracias, ando muy jodido por el tema, la tablet tiene 20 días... |
#19
|
||||
|
||||
No se te ocurrió hacer un nandroid antes de trastear con algo nuevo? Pero bueno lo q puedes hacer es instalar la ROM desde el pc con fastboot.
Parece q tienes problemas de drivers Enviado desde mi Galaxy Nexus usando Tapatalk 2
__________________
[i]
I'm a fucker flasher!
|
|
#20
|
||||
|
||||
Lo hice, pèro en la SD interna que formateé.... Me cargué el backup y el zip de la ROM que debía de instalar. ¿Algún tutorial o explicación para esa instalación desde fastboot?. Muchas gracias, tueurises.
|
Estás aquí | ||||||
|