Avisos

Motorola Moto G5 Motorola Moto G5

Respuesta
 
Herramientas
  #1  
Viejo 22/07/18, 01:59:29
Array

[xs_avatar]
jadeT3232 Hombre jadeT3232 no está en línea
Usuario muy activo
· Votos compra/venta: (2)
 
Fecha de registro: may 2009
Localización: Madrid
Mensajes: 800
Modelo de smartphone: xt1032
Tu operador: Lowi
rom Revivir, Unbrick moto g XT1670 XT1671 XT1676 ...

Enlace a xda

 Cita: Originalmente Escrito por TheFixItMan
This guide is for hard bricked Moto G5 Cedric
Hard bricked means a device which can not enter bootloader mode normally


This method has now been confirmed working

XT1672 32gb version (also works with XT1670 XT1671 and XT1676)
Download mmcblk0 image from here
Thanks to @jcbotelho for providing image

Requirements
Freshly formatted microSD card of at least 32gb
7zip
Linux mint live usb/dvd
USB card reader


Method
The BEST method to flash the sdcard with mmcbk0.img file is to use LINUX!
Windows user have no need to install Linux in pc, you can run Linux from a bootable usb-stick or pendrive that is at least 8gb

0) Put the Moto g5 on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run linux, preferable cinnamon or mate versions of linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) Go to Desktop, open "Computer" and navigate to the location when the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the comand written below and dont forget to eliminate that "1" from the sdcard path,
that "1" can make the differnce betwen phone boot or not!!!!!


Things to note
Linux Live dvd doesn't have open as root so just open in terminal and add sudo to the start of the commands
I've included this in the commands below

If you get a status error just remove status=progress from the terminal command below


Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal aply that comand:
sudo dd bs=4M if=mmcblk0.img of=/dev/sdb status=progress oflag=sync

-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal aply that comand:
sudo dd bs=4M if=mmcblk0.img of=/dev/mmcblk0 status=progress oflag=sync

and the flashing process should start
when it finishes, test the sdcard in the phone and it should boot!

If you get a size error of the sdcard in terminal you have to change the sdcard and try again!

Thanks to vaserbanix for the guide


Re-flash Stock Firmware
Once the phone is in bootloader mode you can flash stock firmware via fastboot
Note that in order to flash gpt the firmware MUST be the same or newer than the version currently on your phone

Once you have firmware that is the same or newer than your current version you can remove the sd card and run these commands (assuming you have fastboot all setup on your pc)

fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot


Imei fix
If your imei is 0 then follow instructions from here
You should be able to restore stock after & keep imei
https://forum.xda-developers.com/g5/...image-t3776012
Responder Con Cita
Respuesta

Estás aquí
Regresar   Portal | Indice > Zona Motorola > Motorola Moto G5

Herramientas


Hora actual: 13:21:27 (GMT +2)



User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.