Recopilatorio de Kernel

[joseignac3]

Hola otra vez,
perdonad que sea tan pesado, pero es que flipo con el kernel ragemod.
Lo he estado testeando varios días, y creo que puedo decir con seguridad que es el mejor kernel, en el post de antes he puesto que el consumo es mayor que los demás, y es verdad, pero es que con este kernel, el móvil va igual de rápido a 1000mhz, y si no probad con el asphalt 6 a esa velocidad y me contais, y a 800mhz también va muy fluído, lo cual me ha sorprendido gratamente.

Ni siquiera se calienta lo más mínimo y va muy fluído igualmente, y la batería obviamente dura bastante más, eso sí, los quadrant entre 2680 puntos y 3013 puntos
Alguien que me comente por favor si lo prueba, a ver si es que tengo un cuadruple núcleo o algo y no lo sé.

[sergy330]

A mi el RageMod siempre ha sido uno de los kernels que mejor rendimiento me ha ofrecido en la práctica con unos buenos consumos

Originalmente Escrito por sergy330

A mi el RageMod siempre ha sido uno de los kernels que mejor rendimiento me ha ofrecido en la práctica con unos buenos consumos

Compi,me podris decir que kernel me tengo que bajar para quitar el triangulo?se instala por odin o por recovery?meti la base kh3,un saludo y gracias de antemano

[sergy330]

Originalmente Escrito por soniakyran

Compi,me podris decir que kernel me tengo que bajar para quitar el triangulo?se instala por odin o por recovery?meti la base kh3,un saludo y gracias de antemano

Sólo me ha hecho falta una vez quitar el triángulo y me lo cepillé con el Jig.

De todos modos creo que tienes que coger el stock kernel de la rom que lleves, en este caso el KH3. Aquí tienes un ejemplo de un compi del foro para que te hagas una idea, es lo mismo pero con los kernles correspondientes: Aquí

Y aquí tienes un tuto con otro método quizás más sencillo: Aquí

Originalmente Escrito por sergy330

Sólo me ha hecho falta una vez quitar el triángulo y me lo cepillé con el Jig.

De todos modos creo que tienes que coger el stock kernel de la rom que lleves, en este caso el KH3. Aquí tienes un ejemplo de un compi del foro para que te hagas una idea, es lo mismo pero con los kernles correspondientes: Aquí

Y aquí tienes un tuto con otro método quizás más sencillo: Aquí

Gracias compi,conseguido con el Stock kernel XXKG6,un saludo

[jmblazquezh]

Kernel Siyah 2.2 beta7

Changelog:

• added Cyanogenmod native led notifications (thanks to DvTonder). You may need to install CM7 again as my previous kernels were copying liblights over the original one. From this version on it will be copied only on samsung roms.
• reverted back to TREE_RCU
• updated AOSP part of the initramfs to cm7-nightly-111.
• some usb driver modifications. I tested adb, usb mass storage (mounting both internal&external storage) and OTG in samsung and cm7 roms (both with and without usb debugging enabled). I hope there is no more usb problems.
• auto-installation of ntfs-3g. it will be copied to /system/xbin.
• initramfs cleanup and compression of some rarely used files.

Renombrar ficehero .rar a .tar



Salu2.

[jmblazquezh]

Kernel Siyah 2.2 beta8

Changelog:

• fixed touchpad backlight not turning off
• fixed usb tethering problem in samsung roms
• fixed the bug which prevents second core to become active
• ,fixed bluetooth problems with AOSP ROMs.
• reverted some optimizations which were causing graphics problems/instabilities
• read-only auto-mounting of ntfs volumes to /mnt/usb/[partitionName] folder. it is readonly because I have no control from the kernel side to “click here to safely remove” feature. if you want to mount them read-write, use your own script to remount them and don’t forget to unmount before removing the device. you can find ntfs-3g in /system/xbin after installing this kernel. mounting ntfs in read/write mode and removing it safely will be supported by the tool (application) that I am working on.

Renombrar ficehero .rar a .tar



Salu2.

[jmblazquezh]

Kernel Siyah 2.2 beta9

Changelog:

• reverted usb changes. sorry, I do not have enough time to resolve problems for both samsung and aosp roms. therefore, I reverted the changes to beta6 where samsung roms have no problems. AOSP part can live with that state I think.
• enabled SCHED_MC for arm topology and set the level to 2 (highest). If you don’t like it you can disable it by : “echo 0 > /sys/devices/system/cpu/sched_mc_power_savings”. SCHED_MC helps reducing the usage of the second core under load, therefore reduces the power consumption. You will not notice any change when your device is deep sleep and it is not something to replace cpu hotplug. It will probably increase the total time of active usage such as surfing or listening to music. Please report your experience but do not report overnight battery consumption :p
• fixed CM7 built in BLN notification.
• changed mount point of external sd to /mnt/sdcard/external_sd for AOSP ROMs (just like in samsung roms) because CWM app checks for external sd backups in that location. I have also created symbolic links in /mnt/emmc and /emmc just in case some other app requires them.

known issues:

1. only external sd is mounted over usb in CWM recovery.
2. bluetooth problems for AOSP roms
3. …new items will be added to this list until a new beta is released.

Last known good beta:
(In case you have a problem, use this version before going back to previous release)
v2.2beta6




Renombrar ficehero .rar a .tar

Salu2.

[jadchaos]

me quedo en la beta6 que no tiene incidencias

[karchax]

Con tantas betas ya no sé ni cual instalar. Alguna que sea estable?

[karchax]

Y que sea compatible con la 2.3.5 KJ1 oficial de Samsung....

[maquilon]

para instalarlo mediante cwm hay que descomprimirlo en la sd primero?

[Zazk]

Originalmente Escrito por jadchaos

me quedo en la beta6 que no tiene incidencias

+1

He vuelto a la beta 6 después de pasar por la 8 y la 9, tenia problemas con el usb.

[sergy330]

Kernel Abyss Plus 2.0: http://www.htcmania.com/showthread.php?t=274388

[jmblazquezh]

Kernel Siyah 2.2 beta10-DarkKnight
Changelog:

• removed symlink from /mnt/emmc to /mnt/sdcard/external_sd
• experimental fix for bt problems (confirmed by goose2600@XDA that it is working)
• disabled SCHED_MC
• experimental lower screen-brightness values for low light conditions (not yet configurable, but it will be)
• fix for touchkey backlight not turning off
• fixed liblights not being copied for miui and oxygen roms. copying lights library suppressed only for CM7 and derivatives.

DarkKnight edition is a safer version which doesn’t let you change some values (freq or voltage) that will make your device unstable (for instance, you cannot undervolt or overvolt your device more than 100mV per step, i.e. it is not possible to set 1200MHz voltage value to 900mV). So, if you don’t know how things work you better use DarkKnight edition. It is aimed for stability and battery life. The default i/o scheduler is noop and cpu governor is lulzactive@100-1200. Some experimental features may be disabled in DarkKnight editions.
known issues:

1. only external sd is mounted over usb in CWM recovery.

Last known good beta: (In case you have a problem, use this version before going back to previous release) v2.2beta6


Renombrar ficehero .rar a .tar

Salu2.

[jadchaos]

seguimos pues con la beta6 :P

[josechufa]

Originalmente Escrito por jmblazquezh

Kernel Siyah 2.2 beta10-DarkKnight
Changelog:

• removed symlink from /mnt/emmc to /mnt/sdcard/external_sd
• experimental fix for bt problems (confirmed by goose2600@XDA that it is working)
• disabled SCHED_MC
• experimental lower screen-brightness values for low light conditions (not yet configurable, but it will be)
• fix for touchkey backlight not turning off
• fixed liblights not being copied for miui and oxygen roms. copying lights library suppressed only for CM7 and derivatives.

DarkKnight edition is a safer version which doesn’t let you change some values (freq or voltage) that will make your device unstable (for instance, you cannot undervolt or overvolt your device more than 100mV per step, i.e. it is not possible to set 1200MHz voltage value to 900mV). So, if you don’t know how things work you better use DarkKnight edition. It is aimed for stability and battery life. The default i/o scheduler is noop and cpu governor is lulzactive@100-1200. Some experimental features may be disabled in DarkKnight editions.
known issues:

1. only external sd is mounted over usb in CWM recovery.

Last known good beta: (In case you have a problem, use this version before going back to previous release) v2.2beta6


Renombrar ficehero .rar a .tar

Salu2.

no se puede renombrar,hay que meterlo en winrar tar con 7-zip,@jmblazquezh,pero ya te los hago yo,saludos.
Siyah-2.2-beta10-DarkKinght.tar
http://www.multiupload.com/G4AK07D2KL

[jmblazquezh]

Kernel Siyah 2.2 beta11

Changelog:

• enabled SCHED_MC and AFTR
• changed crc32 and crc32c methods
• this release should have no problem with internal sd mounting for CM7 roms. please test and report.
• CM7 Only: recreated /mnt/emmc link to get rid of “Preparing SD: Checking for errors” message.

known issues:

1. only external sd is mounted over usb in CWM recovery.
2. some apps may index your external sd content twice because we have both /mnt/emmc and /mnt/sdcard/external_sd directories pointing to the same content.

Last known good beta: (In case you have a problem, use this version before going back to previous release) v2.2beta11 (recursion? yes.. but I mean it)

Cambiar extensión .rar a .tar

Salu2.

[sergy330]

Hellcat's Root Kernel v1.25 // root,CWM5+4+stock,CIFS,BLN,BootLOGO and more

http://www.htcmania.com/showthread.php?t=254421

[jmblazquezh]

Kernel Siyah 2.2 beta12

Changelog:

• back to SLUB
• some performance tweaks in scheduler and memory manager
• re-enabled TREE_PREEMPT_RCU with FANOUT=16 just like in beta6

known issues:

1. only external sd is mounted over usb in CWM recovery.
2. some apps may index your external sd content twice because we have both /mnt/emmc and /mnt/sdcard/external_sd directories pointing to the same content.

Last known good beta: (In case you have a problem, use this version before going back to previous release) v2.2beta11


Cambiar extensión .rar a .tar

Salu2.