 |
|
Menu
| ROMs y desarrollo LG G2 ROMs y desarrollo LG G2 |
«
Tema Anterior
|
Siguiente tema
»
|
|
Herramientas |
|
#1
20/04/14, 02:36:23
|
||||
|
||||
|
[KK 4.4.2 Kernel 3.4.104][14 NOV] Dorimanx 8.9 LG G2 800/1/2/3/5/6 F320* LS/VS980 + DORIMANX OTA(2)
 Dorimanx LG G2 Kernel para STOCK 4.4.2 Estable para los siguientes modelos: D800 D801 D802/5/6 D803 LS980 VS980 No habrá más modelos soportados. Necesitas respuestas para las preguntas que no sea sobre el desarrollo?  Mi kernel esta basado en el kernel stock v20E  Kernel Tree is 3.4.104, + LG JB/KitKat updates + my tweaks and lots of tuning! Créditos! Big thanks to g.lewarne for helping me to start! Savoca for many kernel mods Cyanogen (rmcc@github) for many kernel mods Faux123 for UV/OV, Sound Gain Control, Inteli Hotplug, Fast Charge support! and more! Alucard_24 for AlucardHotplug and mods. LG for Stock kernel base! MyFluxi for kernel updates and fixes. Linus Torvalds for Linux source! 
BUGS conocidos! Se pierde el Root al instalar el kernel por priemera vez. Descargar SuperSU Instalar vía CWM http://download.chainfire.eu/396/Sup...erSU-v1.94.zip Responsabilidad ninguna: Instalando este kernel TÚ tienes la responsabilidad absoluta por cualquier daño que causes al dispositivo. No hay nadie que te fuerce hacerle cosas al Hardware o software! Así que por favor no me echéis la culpa sino has leído bien! o por no a ver leído las instrucciones que he escrito para TI! Pero puedes sentirte A SALVO en utilizarlo, ya que lo pruebo en mi terminal antes de lanzarlo!. Antes de publicar lo para la descarga Tú garantía será anulada instalando un kernel personalizado como bien ya sabéis. Este kernel puede ROOTEAR/DESROOTEAR tu dispositvo! Y ROOTEARlo vía ADB Shell! Información global sobre los modelos de LG: D800 = Modelo AT&T D801 = Modelo US Tmobile D802 = Modelo internacional D803 = Modelo Canada D805 + D806 (el mismo que el D802) LS980 = Modelo SPR (Sprint) VS980 = Modelo VZW (Verizon) Código del kernel: KERNEL GITHUB RAMDISK GITHUB PARA DESCARGLO LEER MÁS ABAJO!!SI MAS ABAJO (Es necesario que lo repita?) Cómo instalarlo: Tienes que tener el dospositivo ROOTEADO y con un Recovery instalado! Ir a otros hilos para el proceso del recovery. Descargar el kernel, copiarlo en tu SDinterna. Descarga el STOCK Kernel para tu dispositivo! Así siempre lo tendrás en la SDinterna pos si pasa algún desastre!!!! Reiniciar en modo Recovery. Instalar el kernel como si de una ROM se tratara. Reinicia!  EN el caso en que te quedes en el Logo de LG y quieras volver al kernel por defecto. Mantener el botón de encendido + Vol bajo hasta que el teléfono se reinicie y cuando veas que aparece de nuevo el logo de LG! Suelta los botones y presionalos de nuevo hasta que te aparezca una pantalla preguntando si quieres hacer un HARD RESET. Le das 3 veces al botón de encendido y ésta te llevará al recovery así que no te preocupes que no te hará ningún formateo. Instala el kernel que viene por defecto y espera a que se solucione el problema. A divertirse y a reportar se ha dicho!! INFORMACIÓN PARA EL USUARIO! LEEDME PRIMERO!!: LG ha empezado a actualizar todas las ROM + Kernel con un nuevo driver pantalla táctil. Éste incluye la nueva característica llamada "knock code", veánlo en youtube si aún no lo han visto. Por ahora tan sólo lo tiene el 802 con las ROMS que tenga de base la 20B/D! Y algunos de los modelos VS980 con las Custom ROM que tenga de base la 20B/D! En la zona de descarga, verás que hay Kernels con una versión normal con tan sólo números. Y Kernel con "No-Knock-Code". SI tu ROM no soporta KNOCK CODE! usa el kernel que no soporte Knock-Code O sino perderás el knock ON. Si sopota el Knock-Code entonces utiliza el normal. Pronto todas las ROMS será soportadas! todo depende de LG y de nuestrxs grandes desarrolladores de ROM *Sobre el forzar de la carga rápida, no todos los dispositivos/modelos soportan este Hack. Así que si no te funciona y estás con los parámetros por defecto con STWEAKS. Entonces es que no te funciona, no quejarse, es un Hack, no un característica de LG. Lista de donaciones:
   Descargas Changelogs: 14/11/14 Kernel 8.9 *Fixed Low Power mod code to prevent stuck in suspend. *Merged updates to speed up CPU code. *Restored BT driver updates. *Restored LowMemKiller updates + fixes. *Disabled ARCH POWER, may lead to SOD. *Merged updates to main CPUFREQ driver. *Removed mods to MDSS (LCD Panel driver) that caused BLACK screen on wakeup. *Reduced overhead in Acpuclk driver, idea by @duki994 11/11/14 Kernel 8.8 *Disabled dual kernel boot for now as we have locked boot loader. *Released 16mb locked RAM to low mem pool. *Merged updates to OCMEM, BINDER, MMC, ARM, CORE, SCHED, TIME, NET *Merged lots of updates to FileSystem: Including FAT,F2FS,EXT4+JBD2, EXFAT, DEBUGFS, + core FS code updates. *Merged BFQ 7r6 update. *Fixed GPU OC code. now works very good. *Merged Alucard HotPlug + Govs fixes/optimizations by DEV. *Merged OOM code fixed, now mem management is very good. *Enabled MMC deferred resume to speedup the wakeup. *Reduced Power Drain by WIFI in suspend. *Merged updates to kernel modem driver. *Updated LINARO to 2014.10 build with soft FPU. *Restored some changes to BT driver, now it's more STOCK. (works good) *Removed some changes to FS to make the code more stable. *Found and fixed broken code in sync driver that was stuck and created SOD from kernel 4.0 till 8.7. now it's GONE!. *Merged fixes to ARM,LPM,QSECCOM,CGROUPS,USB code. *Merged new updates to sound driver and sound policy. *Merged quickwakeup driver that help to resume system fast, and suspend fast. *Fixed bugs in touch screen driver for all models. *Fixed CRON service stop. *Removed FSTRIM CRON, we can only use it with screen on. it's has to sync all data with active system. *Restored new ROM INIT binary's for all models. Profiles will be reset. 31/10/14 Kernel 8.7 *Added GPU OC/UC max/min 650Mhz/100Mhz works great. *Merged updates to slimbus driver for HDMI and others USB devices. *Merged Update to Sound Driver. *Merged updates to ARM code + kernel code performance boost. *Merged fix for useless SYNC to FS during suspend. one sync on screen off is all we need. *Reduced min brightness in dark. *Fixes for FAST CHARGE driver. *Fixes for BT driver. *Merged GPU driver update. *Merged update to Alucard Hotplug + Alucard CPU GOV from DEV. *Reverted LMK updates to fix stability. *Reverted Kernel tuning to fix stability. *Reverted some WIFI changes to fix stability. *Restored Audio Policy to fix stability. *Fixed Cron bugs in scripts. *Fixed charge only set on boot for some users of G3 Port. now will be MTP *Tuned Msm Adreno GPU gov in all profiles. 26/10/14 Kernel 8.6 *Merged new crypto neon accelerated 256/512bit driver. *Merged fix for microseconds calculation in CORE driver. *Merged USB MTP connection speedup for file transfers + bug fixes. *Merged Sound Driver updates from CAF. *Merged New updates to WIFI driver from Nexus 5 source. *Merged updates to Alucard,Nightmare,Darkness CPU govs by DEV + tuning. *Merged updates for Alucard HotPlug by DEV. *Restored function that needed for LG driver. possible big BUG fix. *Cleaned CPU STATS Driver, seems was bugged. now all ok. *Removed fake AC when using USB, it's useless hack, just brake things in ROM. *Merged updates to global CPUFREQ driver. *Merged new Alarm Timer driver from CAF and Main Line kernel. It's responsible for suspend, and fixed many bugs. *Restored changes to Touch Screen driver that i ported, best to use latest STOCK LG driver. *Fixed bug in msm thermal. *Fixed F2FS auto mount scripts, there was BIG mess, and they didnt work! Now all OK. *Fixed CROND terminated by kernel as it's was not running from root script. Now it's protected from kill, same as cortex. 19/10/14 Kernel 8.5 *Merged updates for sound driver. *Merged updates for CORE code. *Fixed manual charge lock on 900ma using 1.8a charger. *Merged updates for SeLinux. *Added Auto mount F2FS partitions if formatted as F2FS on boot. *Fixed CRON functions and added calibrate battery every week. *Tuned Intelli and Alucad HotPlugs. *Fixed Thermal Core down/up control. *Added new controls for how many cores can be OFF during high temp. IF! Core control is Enabled. *Added HotPlug Live Status is Synapse main tab. *Fixed Profiles backup/restore *Made arrangements in STweaks XML to look more clear to understand. *Fixed Stuck freq on core0 after high pressure thermal test. will be reset to max on 55C temp. *Merged updates for Alucard Hotplug. more performance and smart hot-plugging. *Merged updates to Alucard, Darkness, Nightmare CPU govs from DEV. Improved freq handling. *Updated with latest ZVD+ZVE LS980 Source update from LG. it's common code for all branches. +Update to NFC driver +Update to MTP driver +Update to LCD panel driver +Update to sound driver *Tuned Ondemand to be more fast, and respond fast. *Fixed BUG in OOM LMK driver. *Moved all Thermal Controls back to STweaks, in new TAB. Synapse is now for live date state. for debugging. and for fun. *Fixed Stuck freq on CORE0 after boot. and after thermal event. *Updated Alucards Touch boost driver + add/remove control for it. See STweaks. *Tuned Ondemand gov. *We now Boot on 2.26Ghz then set by profiles. was 2.8Ghz (version 8.4 only) *Now ROM thermal alone can handle huge stress test on max TEMP of 77C for 5 min, that all i tested, i am sure it's can hold hour... just bad for hardware. *Fixed 1000ms description. *We now boot on four cores! so boot will be little faster. *Fixed possible SOD bug on charger overnight. and when disconnecting power. *Allowed to charge from USB3 port on 900ma as it's give us that. *Merged update for Alucard and Darkness CPU GOVS. *Fixed MIN freq stuck on some freq above 1GHZ now we can set MIN freq up to 1.03Ghz no more! we dont need more for MIN freq. *Fixed BUG in multi core freq set that can cause deadlock = SOD. *Tuned Alucard HotPlug, now last core will work on stress load. as others. Improved idle state on one core. HotPlug is smart, it's not turning all core for a finger swipe... so you will need to stress is a bit to see all cores online. *Updated ExFat driver, critical bug fixed inside the module. *Fixed performance degradation when freq reduced due thermal event. now will be restored back to max every time temp is reduced. by this boost performance to state of awesomeness! *Tuned ROM thermal policy to work with 5c temp diff for freq cuts. *Added controls for Touch boost driver in STweaks. *Possible random SOD on suspend FIX! *Disable some not used drivers. *Added zip binary for zipping kernel log on creation. so data inside will not be damaged on transfer to me. *Merged power use reducer code, for CPU, will allow to save more power on idle or low load. *Fix slow wakeup from long suspend. *Fix for Alucard Hotplug suspend function. *Tuned Intelli HotPlug to perform faster. 14/10/14 5:00AM Kernel 8.4 (STILL BUGGED!!) *Fixed kernel Install Script.*Merged update to Audio Driver. *Merged new Touch Boost CPU'S code made by Alucard! much better than old one, it's FAST and less battery drained, but getting great "Micro LAG" removal. *Merge Fix for mess in freqs after ROM thermal released from limit. now that we can control each core by it's it's own freq and gov, ROM thermal made mess. Now kernel will take care of that mess, and correct all as should be when core is cold again. under 55C. *Fixed broken in past freqs in I2C BUS. now all good. *Fixed not started MTP on boot. now USB driver will be reloaded after boot. if USB/Charger cable is detected. and by this fix MTP or Fast Charge. 13/10/14 4:41AM Kernel 8.3 (BUG IN Install Script, deleted from storage) *Fixed BUG with suspend SOD. *Fixed Force Fast Charge. *Cleaned POWERSUSPEND code. *Adapted install script for old recovery's *Fixed MSM HotPlug performance drain. *Fixed CPU BOOST battery drain. *Added missing sqlite3 for DB optimization cron. *A lot of work made in RAMDISK boot scripts and Cortex and STweaks + Synapse. See Ramdisk GIT for more info. *Profiles and /data/.dori dir will be reset on first boot. to clean old problems. *New Max freq limit driver added, it's now limit per core, there is no longer need for Global Max Freq limit. so it's removed. What is set in STweaks, that is the MAX limit per core. no other app can change that. WAS ADDED BEFORE (SOD BUG) *Merged updates to PM code from CAF 3.5.y Kernel. responsible for low power mods in suspend. *Added FSTRIM also to Cache partition. *Moved Synapse App from SYSTEM to DATA on kernel install. *Set SELinux to Permissive on BOOT. seems some ROMS just BUGGED. and cant take the Enforce MODE. not my problem. now will be OK. *Fixed MSM/INTELLI Hoplug Suspend function, now it's safe to use for 100% *Fixed BOOT tuning for MSM Thermal control. *Added new status to Synapse that show active CORES in LIVE. *Clean Synapse data when profiles cleaned. *Link wget binary to /system/xbin *Updated refresh times for Synapse status tab. *Profiles will be RESET on first boot. *Fixed OndemandPlus CPU gov. *Fixed Long vibrates bug when typing. *Added support for Synapse Kernel control app! BIG Thanks to @neobuddy89 for help! it's like STweaks but can show live data from kernel controls. for now it's will control the thermal driver. *Added support for USB Simple PPP modems. (WWAN PPP). *Added support for USB to Serial adapters. it's a module that can be loaded by some app for USB adapter. *Merged fix for CMA RAM pages. *Merged Multi CPU Policy code by @alucard_24 that allow us to set different freq for each core, and different cpu gov! All controls are in STweaks.  *Fixed Force Fast Charge and made it super smart! Now it's will on/off it's self if battery is above 95% to preserve battery LIFE. as fast charge can in time reduce battery life if used till 100% Will charge fast when in ON state, or Manual state. also added MAX 300mA as requested, to force slow charging to prolong battery life, if fast charge is not needed. *Merged fix to alucard hotplug from DEV. will improve hotplug performance. *Merged kernel code alignment fix. *Merged some new functions for kernel drivers future use. *Removed old panels hack, as JDI/LGD panels fixed on kernel install. *Fixed GPU update button in STweaks. *Added copy of /data/.dori/ files to /data/.dori_bkp folder before profiles reset! In this new build profiles will be reset on first boot! *Added Anti Fast User function in boot script, that will not allow user to open STweaks till it's service loading controls, to prevent BUGS and mess. User will be denied access to STweaks till all ready! *Added SElinux control to STweaks Other Tab, you can set Enforce or Permissive. *Added File System TRIM support! will be run on boot! And user can push TRIM NOW in I/O Tab in STweaks. if it's show 0 then all was OK. Also we can now set to run TRIM on /system + /data every day at 6:00AM in CRON Tab, active by default! *Removed not used tuner modules from kernel image. 04/10/14 Kernel 8.0.1 *Fixed possible BUG that make SOD on charge, phone alive but screen is black. *Merged CPUFREQ fixes that improve performance. *Added new tweak to STweaks Hotplug tab. now cpu boost duration can be tuned. Kernel 8.0 *Merged updates for CPUFREQ and SCHED CORE code. *Merged HUGE update to Power Manager and QOS Code. *Merged big update to ARM code and CPU code + L2 CACHE speedup fixes. *Merged update to MEM code power suspend. *Merged updates to USB code. *Merged Updates to CRYPTO code. *Merged HUGE update to CPUIDLE code. *Fixed Force Fast Charge code. now will charge fast. *Merged HUGE update to Kernel IRQ distribution Domain. *Merged update for Security Keys code. *Fixed PowerSuspend delaying screen wakeup. *Merged HUGE update to FileSystem code and Kernel System code. *Merged NET code update. *Tuned MSM and Intelli HotPlugs now will hold steady on idle. not jumps. *Reduced Debug code that slowed kernel by 10%. *Fixed stuck SuperSU service on boot. *Added new control to STweaks, that allow to use faster kernel workqueue or more power saver. *Fixed power drain in IDLE/Suspend. 26/09/14 Kernel 7.9 *Updated with 3.4.104 main line patches. *Fixed BoostPulse for Intelliactive + Interactive CPU Govs + code updates. *Updated LINARO kernel builder self made to 2014.09 build. *Updated MSM RQ STATS code to better support Default HotPlug Now much more relaxed and stable on CPU control. *Fixed Force Fast Charge code from resetting low power mode when battery is full to FAST Charge and by this can BUG the kernel and prevent wakeup. Now code is more smart and stable. *Merged HUGE update to CPUIDLE code that responsible for CPU sleep and power up on need from IDLE to full power and fast back to idle. Code is very complicated and many bugs are fixed with this huge port from 3.10.y tree. *Merged HUGE update to Power Mode Domains, this code responsible for powering down drivers on deepsleep and waking them on wakeup. Many bugs are fixed and many new things added that make this code a lot faster and safe. *Merged updates to persistent RAM driver. *Merged code updates to SCHED CORE. *Merged performance boost code for Cortex A15 CPU that we have! If you was thinking that all was fast, well you will be surprised to see how fast it is now! *Merged serious update from TEGRA 3.10.y kernel for CPUIDLE relaxation. this code will help to save power when CPU is not loaded, so kernel will idle much better and not looping useless CPU cycles. when there is nothing to do. *Merged SMP and Unalligned patches to speed up the code process. *Merged CGROUP protection patch. *Fixed App Debug button in STweaks. (not really needed for kernel debug) 21/09/14 Kernel 7.8 *Merged many updates to Audio Driver and to USB Audio driver. *Merged updated to CORE, ARM, SMP and MEM. performance is great, and RAM leaks destroyed. *Merged update to GPU driver, GPU mem leaks removed. *Merged updates for WIFI. *Merged updates to Qseecom driver. *Merged updates to alarm driver. *Merged updates to MMC driver. *Merged updates to Diag driver. *Fixed old bug in kernel/fork.c *Merged NET updates. *Merged latest Seccomp driver. *Merged updates to android binder. *Merged updates to OTG driver. *Fixed many bugs with profile selection and hotplug activation. All profiles will be reset on first boot, and /data/.dori folder cleaned. *Made some code cleanups in kernel and ramdisk. *Fixed Cortex script and other ramdisk scripts. *Merged headphones detect fix. *Merged ARCH updates. *Updated audio policy + enabled USB Audio, Sound is great! *Improved CPU thermal config. 17/09/14 Kernel 7.7 *Reworked Intelligent Thermal Driver. It's now bug free and working great, can be stop/start and tuned. *Merged updates for Sound Driver headset detection code. *Fixed Default HotPlug not starting after switching from other hotplug via STweaks. now all OK. *Tuned MSM HotPlug to be less aggressive, will not pop all cores for nothing on freq jumps. *Restored default LG voltage for touch screen. was 2.7v as min, now 3.3v It's should help with touch response and knock code/knock ON. Possible even make the wakeup faster. *Merged fix for WIFI driver, less power used by wifi driver when it's OFF, but driver is waiting to be turned ON. so now one less routine running even when WIFI is OFF. *Merged more conservative load calculation for default hotplug driver. its help default hotplug to decide if to turn cores ON or NOT on low load request. and by this save power. it's still not WOW but better than was, other kernel hotplugs are still much better. *Merged update to diagnostic driver for ROM/KERNEL operations. *Made some cleanups in ramdisk and adaptations to new changes in kernel. 15/09/14 Kernel 7.6 *Fixed suspend battery drain. now will be less. *More updates to audio driver + fixes for headsets. *Update to audio policy that now allow more sample rates to DSP. Sound is GREAT! *Merged updates for Selinux and CPU core. *Merged latest F2FS driver updates. *Enabled ROM hotplug service without the hotplug, as it's doing other ROM/Power functions, and we had it OFF long time now... same as thermal for camera... *Restored default latency for all models, CPU power increased. *Made small cleanups in kernel and ramdisk. 12/09/14 Kernel 7.5 *Fixed sound hissing in low end headphones/headsets. *Enabled HIFI performance code for all formats to fix sound. *Fixed HIGH speaker sound on boot animation. *Merged new thermal control core by Faux123 and converted it to Intelligent Thermal Control! it's super fast and holding temp just awesome.not letting any overheats to happen. *Allow to set MIC gain to -40 as requested by users. *Fixed Default HotPlug not activated on boot if selected as default. *Updated Sound Control code by faux123 to 3.6 build. *Merged code to reduce I2C bus source freq from 50Mhz to 19Mhz it's will save power. *Merged code that will allow us to use Mutli ROM recovery and switch kernels online! and boot to secondary ROM. for fun! Now we need to wait till recovery is finished and we will be the first LG G2 dual boot users!!! *Merge small fix to kthread work that help to reduce useless jobs in kernel. 08/09/14 Kernel 7.4 (SOUND BUGGED) *Fixed low/high sound bugs. now music will be clear, and incall will be loud. *Merged memory leak fixes for logger code. *Merged Support for MIUI KK STOCK Base ROMS. *Allow to set CAMERA and Incall MIC to -30 in STweaks to allow sound record in concerts. *Fixed Analog Power Amp gain control in Faux App. 04/09/14 Kernel 7.2*Merged fixes for sound driver. Now high performance mode will be active only for HIFI sound music above or equal 96khz. So we can save power using normal sound tracks. Also some fixes for FauxSound Analog Gain control. *Merged fixes for CPUFREQ global driver. mainly fixes from main line. *Merged fixes for OCMEM from CAF. *Merged MMC update. *Merged latest F2FS driver. not used for now. *Merged performance boost mods. *Added new tuning in STweaks Other Tab that allow to set MIN backlight in full darkness. some users reported too bright when using AUTO brightness. well now it's can be VERY dark read instructions in STweaks Control.*Profiles will be reset on first boot to include new tweak. *Removed commit that may have been responsible for some SODS people had before. 22/08/14 Kernel 7.1 STABLE *Merged fixes for MSM/Intelli/Alucard HotPlugs to allow them to work as should in Awake/Suspend mode! no more SODS caused by them. *Allowed to set Speaker Gain max to 20, if that is needed. *Updated LINARO 2014.08 Toolchain kernel builder, compiled by me and tuned. *Merged fix for WIFI driver. *Merged update for CPU BOOST driver, will help in wakeup speed. *Merged updates for Nightmare,Alucard,Darkness CPU GOVS from DEV. *Merged fix for sound driver. *Fixed long vibrates when typing fast, now much less frequent, one in 20~30 clicks. 18/08/14 Kernel 7.0 STABLE *Updated with 3.4.103 main stream patch. *Tuned Interactive gov. *Added new Sound Policy config to allowed higher sample rates to go via hardware decoder. *Merged Sound driver updates. *Merged fix for low mem killer code. *Disabled useless kernel config for all models. *Merged small fix for WIFI. *Added new control for HotPlugs to STweaks, it's allow to suspend hotplug when screen is OFF, or not (default) we had is SUSPENDED!!! for 5 versions now. So i suspect that all SOD reporters have device/rom not compatible for hotplug suspend. and other MANY other have 0 problems... so it's not suspended by default. this will also help with faster wake up on In Call. but may use little more battery when screen is OFF and sleeping... test and see. 12/08/14 Kernel 6.9 *Merged updates for sound driver. *Merged updates for SCHED CORE. *Fixed MSM/INTELLI hotplugs wake/resume functions. *Merged BIG update to SLIMBUS (HDMI) driver. *Merged updates to OCMEM. *Enabled possibility to use external app modules with my kernel. should fix all kind of MODS. *Merged updates for MMC driver. *Updated LINARO kernel builder internal code to 2014.08 release. *Merged updates to Interactive + tuning. *Merged big update to kernel futex and rmutex code. used for many functions and drivers. *Merged update for EXT4 code. *Fixed STweaks Sound Controls when used along with Faux sound App. now both control gains as needed. mic + speaker via STweaks, and headphones + in call speaker via Faux App! *Merged update for cpu-boost code that help hotplugs to run better. *Uploaded VS/LS980 no knock builds. 08/08/14 Kernel 6.8 STABLE! *Merged HUGE update to SCHED CORE and RCU code from 3.10.y Android MSM CAF. Apps open faster, many bugs fixed, CPU cores working great, and much more. *Merged many Suspend updates to get rid of wakeup problems. *Merged updates to Interactive CPU gov. *Fixed PowerSuspend code messing with LCD panel wakeup... should fix all sods. *Added ability to set max 3 cores online in STweaks (Triple Core) *Merged many USB updates, that include better file transfer and bug fixes. *Merged GPU (KGSL) updates. *Patched with 3.4.102 main stream patch. *Fixed sound noises when using old decoded files or low sample rates. *Merged Sound Driver updates. *Merged HDMI updates. *Merged MMC Updates. *Merged Power Manager updates and timekeeping! *Fixed old bug in suspend code. *Updated ONDEMAND CPU gov + Tuning. *Merged NET and WIFI updates. *Uploaded one more build for VS980 without knock code support. i hope it's will work for people without ROM that support Knock code. 04/08/14 Kernel 6.7 *Restored all MMC updates from CAF. *Restored all Qseecom updates + new fixes from CAF *Merged many new sound driver updates from 3.10.y CAF. *Merged NET fixes and other misc system updates. *Restored CMA updates and ARM updates. set 16MB allocated for drivers only to speedup kernel operations. *Restored all GPU commits to fix GPU power controls and many bugs. *Restored Wireless TV driver updates. *Restored CPU code updates and cleanups. *Restored OCMEM updates and cleanups. *Restored GPIO updates. *Restored IOMMU updates. *Restored SCHED CORE updates. *Merged update to Intelliactive CPU GOV by faux123 *Merged sound driver control updates to ver 3.5 by faux123 and fixed sound controls lock for LG sound driver. we dont loose STweaks tuning after using Faux Sound App any more. So what you set in STweaks is now sticking till reboot. no matter what. *Merged update to Interactive CPU GOV. *Merged small camera driver update. *Merged small LED control fix. help with stuck leds, no more... *Restored Audio Policy config file with new controls and sample rates and support for offload and compression and latency fixes. *Uploaded one more build for VS980 without knock code support. i hope it's will work for people without ROM that support Knock code. 02/08/14 Kernel 6.6 *Merged new updates to Alucard/Nightmare/Darkness CPU Govs. *Merged new updates to Alucard HotPlug. *Reverted MSM/INTELLI/CPUFREQ LIMIT usage of LCD Notify for suspend! Suspected as the SOD maker! now it's will use powersuspend as was with 5.9 *Installed patch 3.4.101 from main line. *Restored Random number generator and sync it with 3.16.y kernel code. *Fixed AC3 decoded files, noise when playing music. i dont hear any noise! *Restored MSM/INTELLI HOTPLUG and CPU-BOOST tuning. *Restored Thermal Tuning. *Restored CPU boost commits. This kernel has all that was restored in 6.5.4 and more fixes. 30/07/14 Kernel 6.5.1 *Reverted LCD panel update that came from LS980 LG source update. *Fixed MSM HotPlug Resume function. Kernel number is 6.5 in app. see DATE Stamp. Kernel 6.5 (Deleted) *New Update for WIFI to allow to use hidden SSID connections. *Patched with 3.4.100 main line patches. *Reverted some commits of MMC updates...(suspected as wakeup bugs) *Fixed and perfected MSM/INTELLI/CPUFREQ-LIMIT wakeup/suspend code! This should fix the wakeup BUG. No problem here... *Small correction in STweaks script. Profiles will be RESET on first BOOT. To all users! please delete this folder with any ROOTED file explorer or via ADB /data/system/time then REBOOT install 6.5 kernel. or install, delete, reboot! Suspected as problem maker from older kernel wrong perm set. 27/07/14 Kernel 6.4 *Reverted 2 CPU commits that can be responsible for performance loose. *Restored ability to use only ROM thermal Control for people that want more speed, in cost of possibility to damage the screen with too high temp over time! Playing heavy games, but it's will allow to run games more smooth... (THIS IS DEFAULT LG SETTING!!!) See Thermal Controls in Main tab in STweaks. For others! i strongly suggest to use DUAL Thermal Protection! as set by DEFAULT. *Set Thermal control to use sensor 0 (ZONE0) for cpu temp check. Correct your readings path in monitor apps! *Fixed broken suspend for ALL hotplugs! they didnt sleep! for 6 builds or more! Now they are OFF after 10sec of screen OFF. and when turned ON, in less than 400Msec cores are online! and wakeup is fast and smooth. *Merged new Sound updates. *Added KNOCK CODE Support for VS980! as it's the same as LS980 27/07/14 Kernel 6.3 *Reverted some MMC updates, possible SODS problems for some models. *Reverted Seecom Updates. lets use STOCK. *Reverted CMA Updates, all was OK with MEM before. *Merged updates for WFD (Samsung video over WiFi to TV) *Merged New update to Audio Policy to include new sound formats and rates! *Merged new sound driver updates. *Reverted Crypto updates. This build made to restore stability and usage. I have went back to 5.9 and added only good stuff that i trust. 25/07/14 Kernel 6.2 *Big update to Random Generator (Entropy) from 3.16.y kernel! This allow fast random data generate used by kernel or APPS/ROM *Merged updates for KSGL (GPU) Driver. *Merged many new updates for Sound and HeadSet drivers. *Reverted USB Audio drivers to STOCK, after reports that it's was broken. *Big update for MMC (internal storage) driver from CAF and Nexus 5. *Merged updates for qseecom driver. *Merged new ZVD LG Source update for LS980 Knock Code support! and new touch screen firmware. all new ZVD base ROMS can use this kernel. Others use OLDER NO Knock build. *Merged big update for LowMemKill driver from CAF and Nexus 5. Now it's much more smart and relaxed, not killing apps without need. you may see less free RAM, but it's all under control! *Fixed some NET bugs i have found. *Merged updates for ARM code from CAF. *Merged many new updates for Ondemand GOV, it's rewritten! and much more smart and efficient! some controls removed as they are no longer needed. *Tuned Touch Boost driver. *Tuned new Ondemand. *Found working wget binary and restored AD-Block update via STweaks and kernel version check! *Fixed some small bugs in STweaks scripts. *Improved deepsleep power usage and performance when active. *Possible fixed the strange CPU HANGS in some different conditions. *Found out that if one of the CPU cores overheat too much! it's shutdown and will not work any more till reboot, this is hardware protection! so if you see that one of your cores have 0Mhz when it's online. you burned it too much! reduce MAX cpu temp in STweaks for 2C less.. and REBOOT. Now all CPUS can handle high temp! this why Default profiles and lower have 78C max. 19/07/14 Kernel 6.1 *Updated LINARO 2014.07 toolchain for kernel building, personally compiled by me. *Updated with patch 3.4.99 from main stream. *Updated Qseecom driver from CAF, responsible for secure communication from ROM to Kernel. *Updated Crypto driver. faster and with less bugs! *Major update for USB Audio driver. *Merged major update for sound driver from CAF and Nexus 5, now we have high performance hardware decoding support! and that help to reduce CPU usage when playing super heavy sound files! for example i can play FLAC 192khz/24bit file (350mb just 9:00min) and when screen is OFF, CPU is at 300Mhz one core! and playing without any problem! when screen is ON it's jump to higher freqs but again much less than was. So playing music now use less power! and quality is great! *Merged new CODEC support for WMA,MP2,ACC via DSP processor. *Tuned max CPU temp on boot to prevent reboots when CPU is too hot, for some models / low quality CPU chips. *Tuned Ondemand GOV to provide balanced power/battery save. as people reported higher drain. now should be good. don't expect high score in bench apps, no need to post this junk. *Tuned Touch Boost driver to provide better performance. *Merged updates for modem driver. *Merged updates for BT driver. *Merged updates for Interactive CPU gov. *Merged update for reboot code. *Allowed higher speaker gain in STweaks! up to 15. (use in your own risk!) *Boot D800 with older INIT till new one will be available from LG. *Tuned MSM Hotplug to balance performance. *Added new Button in STweaks under Force fast charge, it's allow to reset battery fuel gauge, and allow recalibration. if you think that % that you see is not right, push that button, and it's should drop/rise or stay as was, than it's OK. after this allow full charge and discharge. don't play with this button too much. it's reset battery calibration in kernel. *Fixed Profiles backup/restore function in STweaks. 15/07/14 Kernel 6.0 *Fixed BT connect delays. *Merged major Sound Driver update from CAF and Nexus 5! Including improvements to Ultra Sound (192khz 24bit) audio drivers. and many fixes for protecting kernel from crash and compatibility with different headsets. *Merged CORE, MEM, CMA updates. we lost 16MB from total ram that now allocated for drivers, this allow much faster kernel work, as ram already free for drivers and no app can touch it. *Fixed stereo call recording support. *Added new option to STweaks to control CPU gov sample rate. *With help from @Formhault now STweaks control descriptions are written much better, and typos fixed. *Fixed WIFI wakelock drain. *Update to Alucard CPU gov by DEV. *Thanks to @pendroz we now have updated RAMDISK binary's from 20D and 20F STOCK kernels! For all Knock Code supporting models. *Headphones volume boosted! make sure you have normal volume set before use it's much more clear and powerful now. 11/07/14 Kernel 5.9 *Merged CPU code updates from 3.10.y kernel. *Merged fixes for BT driver. *Fixed all CPU GOVS and tuned them to deliver high power on need. *Fixed Thermal Protection code. no more shutdowns on too high temp. *Added Optimization Kernel GCC flags to boost performance. *Merged code updates for NET. *Updated with 3.4.98 main stream patches. *Merged big update to ARM code from 3.10.y kernel. *Fixed force USB debug on boot. if not selected in ROM it's will be OFF. ADB will not work in that state. Global CPU performance improved. Profiles will be reset on boot to include new changes. 07/07/14 Kernel 5.8 *Merged all latest updates for GPU driver from MSM 3.5.y kernel. *Merged USB/OTG updates from MSM 3.5.y kernel. *Fixed Speaker Gain settings! now it's stick as set in STweaks! and will be set on boot, and for all sounds! not just music play. *Updated with 3.4.97 main stream patches. *Merged Fixes to BT driver. now connects faster. *Enabled ROM and Kernel thermal controls! and make them work together! This reduce to 0 chance to burn the screen! and controls for heat now active all the time! there is no more selector STOCK or Intelli Thermal, and camera closes fast! *Merged fixes for sound driver. *Merged fixes to ARM code. *Merged updates to modem driver. first mirror is busy! hackers dont sleep... so use second mirror. 04/07/14 Kernel 5.7 *Added auto FIX for panel type! on kernel install! thanks to @dr87 now JDI panel type users will get fully working LCD panel! no white lines! No need to flash any modded kernels or use any MOD zips to set panel. *Merged updates to camera driver. *Merged Critical fixes for NET and ROW I/O sched. *Merged fixes for Interactive Gov. *Merged critical fixes for GPU driver! GPU performance increased. *Merged new encryption driver, for now just there for future use by some app. *Merged update for LCD panel that allow brightness change even if no GPU activity! when nothing moved, brightness was stuck as last set, even if needed. delay was small... but now it's gone! *Merged LCD driver update to suspend faster, will save power on screen Off. *Merged fixes for MMC driver all about power suspend when not used. *Merged fixes to Modem driver. *Merged fixes for CPU drivers. *Merged update to MSM CPU FREQ Limiter code. now more optimized. *Merged new driver for stream synchronization during capture and playback. *Fixed typos in STweaks descriptions. I will not release any more updates for D800/1/2/3/F320 without knock code!!! All Roms have the base updated! so time to update your ROM. 02/07/14 Kernel 5.6 *Merged CPU code improvements! A lot! see GIT *Merged misc Android code fixes. *Updated LINARO Kernel Builder tool chain to 2014.06 GCC 4.9.1 self compiled. *Many fixes to NET and WIFI. *Merged new updates to Intelli HotPlug. *Merged new updates to Alucard HotPlug. *Merged new updates to Msm Hotplug. *Merged new updates to MSM cpu limiter code. *Merged Mutex and Core new updates. *Merged GPU code updates. *Merged sound code updates. *Merged patch 3.4.95+96 from main stream. *Merged D800 v20u LG source update for Knock Code support and more for ALL! *Merged D801 v20e LG source update for Knock Code support. *Merged D803 v20f LG source update for Knock Code support. *Updated F320* Knock Code support from above updates. *Fixed many GCC compile errors and bugs that where hidden! now they destroyed! *Improved kernel GCC flags to boost performance. *Added Freq Boost on wakeup to speed up things! *Merged CPU Touch Boost updates!. *Updated PowerSuspend code! *Enabled Sched Autogroup code! *Merged ARM code updates. *Merged many kernel code updates. *Merged CPU PWR topology updates. *Disabled gentle_fair_sleepers for smoother UI. *Start Kernel boot with MSM HOTPLUG by default. *Start Kernel with Ondemand CPU gov. *Start Kernel with Full Thermal protection (ROM control + Intelligent Thermal) after boot all set as selected in Stweaks. *Update to Alucard CPU Gov. *Update BFQ I/O sched to v7r5 *Merged FIX for G3 Port ROM for 0 Storage display! *Misc bugs fix in Ramdisk files. 23/06/14 Kernel 5.5 *Reverted code that was braking CPUFREQ. *Updated CPUFREQ limiter code! also possible fix for stuck apps. *Merged updates for WIFI and NET code. *Merged Updates for GPU Driver. *Merged update for IOMMU driver. 21/06/14 Kernel 5.4 (deleted! CPU freq stuck BUG) *Major update to android binder code from 3.16.y it's responsible for memory allocation for services. *Major update to GPU ION memory allocator. *Update IntelliDemand CPU Gov. *Update to sound driver. *Update to USB OTG driver. *Added Tcp Congestion Control to STweaks. This update should fix apps freeze in some points. will not fix broken swiftkey keyboard app!!!! All NEW changes from 5.3 + 5.4 exist in 5.5! 20/06/14 Kernel 5.3 *Updated with 3.4.94 upstream update. *Added support for G3 ROMS! thanks to @Cloudyfa *Fixed profiles reset via STweaks. (minor bug) *Tuned Cortex Script, CPU freq helper see GIT. *Updates to Alucard CPU Gov by DEV. *Added short path to Hotplug govs for advanced users. see /hotplugs folder. *Fixed Screen OFF CPU freq control! its was broken... Now works! i call that feature Anti Brain Cooking feature! As it's will make phone much more cold during call! as CPU cant get to max freq. But this control is set to MAX(disabled) at STweaks. so best to set it to 1.5Ghz max on screen off.. *Updates to sound driver code. *Updates to Kernel misc code see git. *Reverted BT/GPS mods to have more STOCK code for BT and GPS. *Big update to USB code and OTG. mostly bugs fixes and other corrections. *Updates to NET code and to PWR controls. should waste less on sleep. *Updates to camera driver and to video encrypt/decrypt. *Bug fix for ondemand GOV. 15/06/14 Kernel 5.2 *Fixed MIC gain bug, now OK. *Added new sound controls to STweaks. you can now set MIC and SPEAKER gain. In FauxSound app MIC/SPEAKER now only SHOW the value set by STweaks. it's will not change it. use STweaks for that. Kernel 5.1 *Updated with 3.4.92+93 upstream updates. *Updates to All CPU HotPlugs! much changed for MSM and Intelli! Alucard updated with fixes by DEV. *Now it's possible to set 2 or more CPU cores non stop online. *Now it's possible to set screen OFF max freq. to save power when listening to music and phone is not in deepsleep. *Updated Linaro 2014.05 GCC 4.9.1 self compiled. *Added option to disable logcat or use other options for it, see STweaks Other tab. *Fixed low MIC/Speaker gain. now other side will hear you loud and clear. if you have FuaxSound app you will see that mic gains are higher than app can set! that is OK! that is what we need, app 0 = 24 for us, app 10(max) = 34 for us! this is for MIC/CAM MIC only. you can tune the level from 0 to 10 in app, then exit, and load again and you will see that setting is your set + 24 *Merged many updates to kernel CORE functions. *Merged updates for NET and RAM. *Merged updates for camera and sound. *Merged updates for GPU and LCD. *Merged updates for touch CPU boost. *Merged updates to support Linaro GCC 4.9.1 *Merged updates for all CPU Govs. *Merged update for safer boot with JB bootloader and LCD boot commands. Now risk to have fried LCD panel that people speak about is eliminated! *Updated ExFat driver. *New options added to profiles, so they will be reset on first boot after install. 05/06/14 Kernel 5.0 *Merged updates to MSM HotPlug from DEV and contributors. *Merged updates to Alucard HotPlug by DEV! *Fixed CPU Govs sampling rate change, now can be changed. *Merged LG way of working with Ondemand CPU GOV. now when selected power save it's works with Samsung SG4 way, and if Performance mode than with LG mode *Tuned CPU GOVS for balanced power. *Fixed code mistakes in Intelli Thermal driver. *Merged updates to CPU BOOST code. *Fixed INIT.D run by busybox (updated busybox installed in kernel) now if ENABLED will run all scripts! *Fixed loosing ROOT on clean install! i hope so *Tuned all I/O Govs to deliver more speed as they tuned to android needs. Now ROW is not using 100% I/O for read, and allow 20% to write on high priority to reduce small lags. *I have tuned all profiles and set to be RESET on first boot to have changes. *Merged updates to Camera driver from CAF. *Merged updates to LCD panel, now rotation is faster. *Merged updates to video driver. *Added new CPU GOV Alucard! it's made by DEV you already know it's strong gov for performance needs! will get you to max power quick and reduce to low also fast, dont expect it to save power but tuning controls are free to mod. *Updated BFQ I/O sched to v7r4 from source. *Merged updates to global kernel stuff for NET,RAM,USB,BUG checks.. 01/06/14 Kernel 4.9 *Big update to Intelligent Thermal control! now it's can go up to 80C and still be stable. but default set to 75C *Enabled NET WESTWOOD + HTCP + BIC + CUBIC congestion controls default is set as CUBIC as was in all older kernels. Read GOOGLE for what is it, and what is the difference. *Updated All CPU Govs with fixed code in functions + a lot of tuning. *Updated CORE code from main line. *Improved Fast Charge code. now will charge fast! also when using Intelligent Thermal driver. *Fixes for LINARO 4.8 builder. *Disabled some more DEBUG code that drained battery and performance! *Merged BT code updates. *Merged new updates for Touch CPU Boost code! *Merged updates to MMC code. *Merged HUGE update to GPU driver from Nexus 5 KK source! Now we can select 4 different GPU Govs and tune them via STweaks! New TAB = GPU CORE! have fun with it. *Huge update to MSM HOTPLUG, now it's responsive and powerful as never before. *Big update to Intelli HotPlug, very smart and responsive! *Many updates to Alucard HotPlug very smart and responsive! *Merged special control for msm-adreno-tz GPU Gov by Faux123! Allow to control the Gov even more! see STweaks. *Merged sound code updates. *Merged Mem code updates. *Merged better WIFI power management. *Merged updates to camera driver. *Fixed CIFS mounting! *Merged code that MAY allow using OTG + Charger! but need to test it. it's OFF by default. PM me for instructions if you have cable. *Tuned all profiles and set to RESET them on first boot! to add new controls. 23/05/14 Kernel 4.8 *Updated with 3.4.91 main line patch *Merged code fixes to camera driver. *Added Button in STweaks in OTHER, Reset Camera Now, in case that camera STUCK and there is a black screen in APP, go to STweaks and fix it *Merged updates to MSM HotPlug from DEV source! *Merged updates to Alucard HotPlug from DEV source! *Merged updates to Intelli Thermal code by Alucard_24. *Merge kernel fixes for LINARO builder compatibility. *Merged tweak to allow Stereo Call Record. *Alucard updated his Nightmare + darkness CPU govs, now more responsive. *Merged fixes for memory leaks in global drivers and in video/ion driver. *Merged fixes for video encoding. *Now correct GPU speed is reported from kernel, idle speed is 27mhz *Merged new USB driver part that allow to use PHONE as USB Keyboard and Mouse for your PC! it's OFF by default and needs APP name USB Keyboard from google play. also to use it you need to enable is in STweaks in Tweaks tab. the disadvantage is: when driver is enabled, you get 2 connection alerts! one for MTP and one for HID (keyboard mouse support) *Tuned ONDEMAND Smart UP tuning to allow more smooth usage on power save mode. *Merged updates for SMP and CPU code. *Merged change to video driver to allow it to work in HIGH priority and deliver video performance boost. *Merged Sound driver updates. *Merged MMC driver updates. 17/05/14 Kernel 4.7 *Updated with 3.4.90 main line patch. *Merged CPU Core updates up to 3.14.y kernel! many fixes to how system operate and save power. Now much less drain on standby and during operation. *Tuned Ondemand CPU Gov, now much more responsive when using power save mode (new in STweaks) *Added touch boost driver updated to deliver freq boost on touch to prevent small lags when scrolling. This can be tuned via STweaks. *Used Fix by Faux123 to fix Faux sound gain boost driver. now enabled again in kernel! and can be used with faux app for it. *Updated MSM HotPlug from DEV source. *Updated Alucard HotPlug from DEV source. *Disabled core debug, useless for all, and just drain cpu power. and write logs non stop on idle. not any more *Merged updated Interactive CPU Gov from Myfluxi source. *Added option to enable support for Apple chargers! it's OFF by default and it's can brake support for all kind of not standard chargers. see STweaks force fast charge section. *Fixed not turning ON Red led on USB charge from PC. *Disabled WIFI debug, to save power. not needed. *Updated EXT4 driver, and other File System code. *Updated MEM Code. *Updated NET Code. *Updated power Suspend code. *Updated video driver code (decoder code) *Updated profiles in STweaks! (first boot will reset active profile to default values!) *Arranged STweaks TAB's 10/05/14 Kernel 4.6 *Updated with 3.4.89 main line patch. *Updated Alucard Hotplug from DEV source. *Removed useless debug code! performance increased and battery drain reduced. *Fixed broken sampling rate setting in all CPU govs. now will stay as user ask. or default 60000. will save more battery *Alucard helped with cleaning all govs from useless function for sampling update. and fixed code logic. *Removed hack for knock ON. for AOSP, we dont need it, as we use STOCK. *RAM management improved. *Merged updates for MMC code, some are critical. *Merged updates for sound code. *Merged updates for WIFI code and common NET code. *Merged updates for camera driver. *Made full sync with 3.4.88 for USB OTG driver. mounting NTFS/exFAT need APP, OTG USB helper. but FAT32 mounted right away. *Merged many system code updates for all kind of android drivers. see GIT. *Merged STOCK ondemand gov from LG source, with small changes to work with my kernel. for now only for testing. not in STweaks. Remember to install kernel for your model and for ROM that has KNOCK code! read USER INFO! If you loose ROOT. install via recovery SuperSU 1.94 06/04/14 Kernel 4.5 *Kernel created with Linaro 2014.04 optimized for our device, compiled from source by me  *Added ability to reduce core usage for all KERNEL CPU hotplugs! Now ECO and STRICT modes working for all, (not for default old junk) *Added option to control CPU boost for MSM HotPlug, see STweaks. *Disabled Faux123 Sound Driver control module. it's must be tuned before use. Too much problems with sound and mic gain. *I have raised voice volume in all branches sound config. *I have merged all ramdisks for all branches! now all have there own special stuff that i didnt have in D802 ramdisk. Some things will work now, i dont know which as i cant test. *I have added 200Mhz and 320Mhz to GPU freqs and allowed to be idle on 200Mhz! and was on 320Mhz non stop. power should be saved more now. *Merged MSM HotPlug updates by DEV. improvement on idle handling, And more performance boost on short bursts. *Merged Selinux fixes. *Merged Reboot code fixes. *Added Darkness CPU gov to STweaks. *Fixed missing Default CPU Temp throttle controls. 02/05/14 Kernel 4.4 *Merged updates for Alucard HotPlug *Merged updates for MSM HotPlug *Merged RAM Fixes. *Merged Camera drivers fixes. *Merged patch 3.4.88 *Merged CPU code fixes. *Merged NET Updates. *Merged Ramdisk for VS980 *Merged New BFQ 7r3 for 3.4.y *Merged many fixes for video decoder and lcd panel. *Cleaned Sweep2Sleep will use little less ram. *Updated config for D803 *Merged MMC patches *Merged Sound patches. 27/04/14 Kernel 4.3.4 ONLY for LS/VS 980 branch. *Disabled KNOCK CODE mod to allow KNOCK ON to work. till LG will update ROM code for ls/vs980 ROMS. *Restored AOSP ROMS Hack for KNOCK ON. *Updates to Alucard HotPlug by DEV. *Updates to CPU load Calculations. *Small Update for faux123 sound controls code. Kernel 4.3.1 *Fixed Knock Code to unlock to HOME not to lock screen. Kernel 4.3 *Merged D802 20B new Source code! with KNOCK CODE source! Now ROMS that based on 20B with option for KNOCK CODE on lock screen will have the ability to unlock by using knock code on turned off screen! *Updated Busybox 1.22.2 custom patches and support for F2FS *Merged New HotPlug driver by Myfluxi named MSM HotPlug! It's very good replacement for OLD junk ROM binary! that is slow! Kernel driver works 10x faster! It's now DEFAULT hotplug. controls in STweaks. *Fixed My scripts, removed not needed things. *Merged massive update to SOUND Driver. should improve sound and headphones effects.. *Tuned Ondemand CPU gov to be faster and removed LAG on wakeup. *Removed Touch Boost and replaced with LG CPUBoost code. *Updated Alucard Hotplug from DEV tree. (bit thanks to @alucard_24) *Updated EXfat driver and allowed ROM vold to use it! (big thanks to @faux123) *Merged MMC updates from new sources. 22/04/14 Kernel 4.2 *Removed NET tweaks from kernel scripts. *Fixed broken ROOT, by removing the root/unroot options. no needed any more. we all have ROOT any way. *Fixed NET problems in all branches + added missing NET code to D803 branch. *Updated Busybox to support kitkat + fixes. *Fixed my booting scripts to mach new kernel PATH to controls. *Fixed SElinux code. *Updated logger and binder from main line. *Fixed Reboots. *Fixed Alucard HotPlug power code. 20/04/14 Kernel 4.1 first public Alpha Build! *Kernel based on D800/2/3 20E Source! *I have merged all the cool stuff from my LG JB kernel See what inside list! *Kernel is in high Alpha test stage! but it's STABLE and working good on STOCK Builds. *This kernel not supporting CM/AOKP ROMS!!! STOCK ONLY. *SI pierdes el root después de instalarlo, descarga el SUPERSU 1.94 y flashealo vía recovery.If you loose ROOT after kernel install, download SuperSu 1.94 zip and install via recovery! El link lo tienes en BUGS conocidos Lo solucionaré en la próxima versión! Por ahora postear/reportar todo en el hilo hasta que la nueva FAQ para KK esté abierta. Disfrutad del kernel! Hilo Oficial:
(Click para mostrar/ocultar)
Última edición por iall5tar Día 16/11/14 a las 09:07:01 
|
| Los siguientes 15 usuarios han agradecido a iall5tar su comentario: | ||
|
|
|
#2
20/04/14, 02:37:20
|
||||
|
||||
|
[OTA] DorimanX OTA V1.7 [2-10-2014][FREE / PRO] LG G2 800/1/2/3/5/6 F320* LS/VS980
[OTA] DorimanX OTA V1.4 [03-09] LG G2 800/1/2/3/5/6 F320* LS/VS980
ATENCIÓN: SOLO PARA BASADAS EN ROMS STOCK. SOLO PARA DORIMANX KERNEL No me hago responsable de bricker los dospositivos o por un mal flasheo. Esta aplicación está bajo su responsabilidad. Por la necesidad de un actualizar el kernel de Dorimanx el compañero @Dieche(xda)l ha creado una aplicación con la app Tasker. Las caracater´siticas de esta aplicación son limistadas por Tasker.Esto quiere decir que no es posible realizar todo lo que se desea ya que no está escrito en Java.(aunque su cometido lo hace muy bien) Con DorimanX OTA podrás descargar y flashear el kernel. El modelo lo detecta autmáticamente y la app buscará el kernel para tu modelo. Cuando esté descargado podrás flashear el kernel. Se reiniciará en el recovery y lo flasheará autmáticamente. Si crees que le falta algo que se pueda añadir en la lista de haceres tan sólo di lo. Características de la vFree: - Download - Check MD5 - Flash - Refresh on startup - Choose mirror - Set webcache time - Logging Características de la vPro: - Check every x hours - Check on boot - Check only on WiFi - View changelog - Live log data DESCARGA: Free: Play Store Pro: Play Store CONSEJOS: - La aplicación es rápida si deshabilitas el log. SOPORTE: Será soportado mientras el compi siga teniendo el G2 y Dorimanx siga lanzando nuevas actualizaciones. PARA HACER: - Better error handling - UI layout when rotating, or turn off rotating - Check for BETA versions D802 model CHANGELOG: v1.7 (2-10-2014) General: - Forcing portrait mode. - Fixed bug in clear logs on startup. - Changed fetching online versions to support Vx.x.x and so on. - Changes in flow control of functions, abort existing function when new one is called. - Changes in caching, file writing was already implemented in HTTP GET function. - Removed splitting variable and added section of variable in online versions. - Not looping through online versions when webcache not updated. - When updating cache show Downloading instead of Loading. - Added zoom option to log viewer - Added swipe to accept flashing - Added countdown with cancel before flashing Pro: - Set max retries of update checking to 2 when connection problem. - Fixed check only on wifi. - Fixed update checking (maybe needs change to support Vx.x.x). - Fixed manually stop update check from retrying. - Added changeable retry count v1.6 General: - Reset magic, when new variables declared - Model override in settings + disclaimer - Small code changes of index select boxes - Option to clear logs on startup v1.5(25-9-2014) General: - Faster startup - Fixed rotation layout - Changed text filesize to size - Added donate to DorimanX button in menu - Fixed local size text hanging on '-' instead of 'loading' - Automatic symlink creation if md5 command not exist Pro: - Faster opening changelog - Fixed bug in changelog cache - Retry update check on boot if connection error v1.4(9-9-2014) General: - Small fixes - Added local file size - Fixed bug that data loaded 2 times at some condition - Check if device manufacturer is LGE - Write log to disk (DorimanXOTA/) instead of global variable - Write cache to disk (DorimanXOTA/cache) instead of global variable of ~25kB - Download kernel file to DorimanXOTA/cache, after download move to DorimanXOTA Pro: - Hide changelog button when downloading - Option to vibrate when update found - Fixed only check on wifi - Better changelog regex - Changelog cache implemented - Write changelog cache to disk (DorimanXOTA/cache) instead of global variable of ~240kB v1.3 (7-9-2014) With this release there will be a free and pro version. The free version will have less features. General: - Changed model detection, there was a build in feature to get model. Not needed to read whole build.prop. Free: - Removed pro features Pro: - Added changelog (needs some optimalisations) v1.2 (5-9-2014) - Live log data in main scene - Give extra message when MD5 not matching - Set logging, live logging on as default - Option to refresh data on startup or not - Changed initialization of settings scene - Navigation buttons on top changed - Add link to XDA thread - Changed settings UI - Add action to icon (top left) in settings and log v1.1 (4-9-2014) - Refresh webcache after downloading to ensure that 'Online MD5' is correct - Run 2 times sync command before calling 'reboot recovery' - Clickable notifications, they are opening DorimanX OTA - Fixed downloading had hardcoded mirror, now using chosen one - Removed check if current kernel is 'dorimanx' for downloading/flashing - Fixed model detection for VS980. Play Store Última edición por iall5tar Día 04/10/14 a las 10:34:08
|
| Gracias de parte de: | ||
|
#3
20/04/14, 02:43:18
|
||||
|
||||
|
Por cierto aunque en el link de descarga ponga JB,es para stock KK.
|
|
#4
20/04/14, 04:48:53
|
||||
|
||||
|
funcionando, en un D805 con rom cloudyflex 2,0
|
| Gracias de parte de: | ||
|
#5
20/04/14, 07:19:29
|
||||
|
||||
|
funciona assics en d801
|
| Gracias de parte de: | ||
|
#6
20/04/14, 17:40:11
|
||||
|
||||
|
Nueva versión, para los que como a mi no va el knock on después de flashear por kdz,zip,tot otra rom que no sea la v20B (vodafone)
Cita:
|
| Los siguientes 3 usuarios han agradecido a iall5tar su comentario: | ||
|
#7
20/04/14, 17:47:51
|
||||
|
||||
|
Que tal va este kernel? , yo estoy con savoca 2.0 con rom cloudy stock 2
|
|
#8
20/04/14, 18:16:11
|
||||
|
||||
|
Cita:
Ir va de pm. 
|
| Gracias de parte de: | ||
|
#9
20/04/14, 20:57:18
|
||||
|
||||
|
Pir cierto si la instalais recordad que tenéis que Flashear el zip de supersu 1.94 para volver a ser root.
Próxima liberación lo solucionará. Saludos. EDITO: OP requeteeditado! =) Última edición por iall5tar Día 21/04/14 a las 01:07:12
|
|
#10
21/04/14, 06:06:03
|
||||
|
||||
|
habeis perdido el lock screnn al instalar el 4,1?
|
|
#11
21/04/14, 07:39:13
|
||||
|
||||
|
Cita:
A que te.refieres de perder el lockscreen? Yo la llevo y no he perdido nada.
|
|
#12
21/04/14, 10:18:19
|
||||
|
||||
|
|
#13
21/04/14, 12:59:14
|
||||
|
||||
|
Oye que eso de apagar la pantalla con deslizar a izquiera o derecha?
|
|
#14
21/04/14, 17:05:20
|
||||
|
||||
|
Cita:
|
|
#15
21/04/14, 17:16:42
|
||||
|
||||
|
Cita:
|
|
#16
21/04/14, 17:26:01
|
||||
|
||||
|
Cita:
|
|
#17
21/04/14, 17:31:19
|
||||
|
||||
|
Cita:
Cita:
LA App se llama Stweaks. Y está en la pestaña de Tweaks. y se activa donde pone sweep2sleep Lo activas y le das a Apply y listo. Saludos.
|
| Gracias de parte de: | ||
|
#18
21/04/14, 17:33:50
|
||||
|
||||
|
Cita:
|
| Gracias de parte de: | ||
|
#19
21/04/14, 17:38:58
|
||||
|
||||
|
Cita:
|
| Los siguientes 2 usuarios han agradecido a iall5tar su comentario: | ||
|
|
|
#20
21/04/14, 18:53:14
|
||||
|
||||
|
Cita:
|
| Respuesta |
Estás aquí
|
||||||
|
||||||
«
Tema Anterior
|
Siguiente tema
»
|
|
Hora actual: 20:04:33 (GMT +2)
HTCMania: líderes desde el 2007