![]() |
|
Motorola Moto E (2014) Todo sobre el Moto E de Motorola (modelo 2014) |
«
Tema Anterior
|
Siguiente tema
»
|
Herramientas |
#1
|
||||
|
||||
Móvil no flashea
Hola gente!
Tengo un Motorola Moto E versión 2014 (modelo XT1021), que siempre estuvo con su sistema de fábrica, sin rootear ni nada. Hace cosa de un mes, lo encendí después de una temporada apagado y se quedó en modo "Flashboot", con la siguiente leyenda: "Fastboot Reason: Fall-through from recovery boot mode" El caso es que nunca sale de ahí. He intentado iniciar con todas las opciones del menú ("Normal Powerup", "Recovery", "Factory", "Barcodes", "BP Tools" y "QCOM"), pero siempre sucede lo mismo: el móvil se reinicia y vuelve de nuevo a la misma pantalla. El PC reconoce bien el dispositivo, aunque está bloqueado ("Device is Locked"). He intentado flashearle de nuevo la ROM siguiendo este tutorial, ya que el usuario en cuestión utiliza un móvil también bloqueado y le funciona: http://www.webs.com.gt/revivir-motor...om-de-fabrica Pero a mí no me funciona, saliéndome el siguiente error en la consola del PC tras ejecutar "FlashFirmware.bat": "Flashing GPT and bootloaders ... sending 'partition' <32 KB>... OKAY [ 0.030s] writing 'partition'... Preflash validation failed FAILED <remote failure> finished. total time: 0.591s sending 'motoboot' <1669 KB>... OKAY [ 0.120s] writing 'motoboot'... Motoboot: Preflash validation for tz Preflash validation failed FAILED <remote failure> finished. total time: 0.601s Flashing Modem SW ... sending 'modem' <46132 KB>... OKAY [ 1.753s] writing 'modem'..." Y ahí se queda congelado. Al mismo tiempo, en la pantalla del móvil sale esto: "USB connected cmd: getvar:max-download-size cmd: download:00008000 cmd: flash:partition version downgraded for primary_gpt cmd: getvar:max-download-size cmd: download:001a1400 cmd: flash:notoboot version downgraded for tz cmd: getvar:max-download-size cmd: download:02d0d000 cmd: flash:modem" Y ahí se queda congelado también. Por otra parte, he pensado que podría instalarle a este móvil LineageOS, pero claro, para eso necesitaría desbloquearlo y no sé cómo desbloquearlo sin entrar en el entorno de Android. Llevo mucho tiempo investigando por la Red, pero ya me veo impotente. Por eso recurro a este foro. Si alguien me echa una mano, lo agradeceré muchísimo. Un saludo y gracias por adelantado! ![]() Última edición por moltamoto Día 01/11/18 a las 20:40:05 |
|
#2
|
||||
|
||||
Creo que he avanzado algo
Bueno, creo que el error que antes reporté era debido a que estaba intentado flashear un firmware antiguo (Android 4.4.4) y fallaba al intentar hacer el downgrade.
Hoy he intentado flashear el último firmware y he avanzado un poco más, aunque también me da un error. He seguido esta vez este tutorial de XDA: https://forum.xda-developers.com/sho...&postcount=245 Me he bajado esta imagen (Android 5.1): https://androidfilehost.com/?fid=24459283995312210 Y he seguido los pasos del tutorial, pero me falla al intentar flashear la imagen: Código:
>mfastboot flash partition gpt.bin target max-sparse-size: 256MB sending 'partition' (32 KB)... OKAY [ 0.090s] writing 'partition'... (bootloader) This may take a few seconds, if a (bootloader) different partition table is being (bootloader) flashed since we need to backup (bootloader) and restore a few partitions (bootloader) Flashing primary GPT image... (bootloader) Flashing backup GPT image... OKAY [ 0.611s] finished. total time: 0.701s >mfastboot flash motoboot motoboot.img target max-sparse-size: 256MB sending 'motoboot' (1669 KB)... OKAY [ 0.180s] writing 'motoboot'... (bootloader) flashing tz ... (bootloader) flashing rpm ... (bootloader) flashing sdi ... (bootloader) flashing aboot ... (bootloader) flashing sbl1 ... OKAY [ 2.093s] finished. total time: 2.283s >mfastboot flash logo logo.bin target max-sparse-size: 256MB sending 'logo' (527 KB)... OKAY [ 0.110s] writing 'logo'... OKAY [ 0.150s] finished. total time: 0.260s >mfastboot flash boot boot.img target max-sparse-size: 256MB sending 'boot' (10200 KB)... OKAY [ 0.421s] writing 'boot'... OKAY [ 1.743s] finished. total time: 2.183s >mfastboot flash recovery recovery.img target max-sparse-size: 256MB sending 'recovery' (10280 KB)... OKAY [ 0.451s] writing 'recovery'... OKAY [ 1.773s] finished. total time: 2.233s >mfastboot.exe flash system system.img_sparsechunk.0 target max-sparse-size: 256MB load_file: could not read 248819368 bytes from 'system.img_sparsechunk.0' error: cannot load 'system.img_sparsechunk.0': Unknown error > ¿Alguna idea? |
Respuesta |
![]() |
||||||
|
«
Tema Anterior
|
Siguiente tema
»
|
|
Hora actual: 22:38:09 (GMT +2)
HTCMania: líderes desde el 2007