Measure blood ya disponible gracias a un usuario de xda

[adrianr1]

Samsung ya ha activado el medidor de presión arterial en Korea y gracias a un usuario de XDA podemos tenerlo siguiendo unos sencillos pasos

https://www.xda-developers.com/heres...e-2-right-now

[pauljbl]

Ya lo probé ayer y funciona bien. Calibrado y todo

[brandi]

Soy incapaz de hacerlo. Conecto el reloj pero a partir de ahí no sé como seguir

[tontomele]

A mi tambien me funciona perfecto

[brandi]

¿cómo se hace el paso de instalar el tpk?

[tontomele]

Originalmente Escrito por brandi

¿cómo se hace el paso de instalar el tpk?

Okay, I'm going to explain all the steps I've done. I will try to simplify driving to the maximum.
In attached you will find the APK and the TPK that I used (the credits for both go to those who upload them in the forum; thank you very much), and old version of SDB (2.2.6.0).

Of course, everything will be AT YOUR OWN RISK, so you need to know what you are doing!

0) Enable debugging and "Developer Options" on the GWA2, activate WiFi (same network where the PC is connected, the guide concerns only Windows, sorry for this)
1) Download the attached files and dezip it
2) Download and install TizenStudio 3.7 with IDE installer (608MB)
3) Start TizenStudio, at the top you will see a box with "No target" written, click on the drop-down menu and choose "Launch Remote Device Manager" click on "Scan" and you will find your watch.
4) Click on "Connect ON" and accept the connection on the watch. Once connected, open the folder containing SDB 2.2.6.0, CMD, "sdb install bp.tpk"

If you have installation problems you have to try these ways
- on the watch activate wi-fi, deactivate bluetooth, restart the GWA2, retry steps 3) and 4)
- if you have not solved, you must reset the smartwatch, re-associate it with your smartphone and repeat steps 0), 3) and 4).

Let me know if you have difficulties and where, forgive my English but it is the result of Google Translator

[brandi]

Originalmente Escrito por tontomele

Okay, I'm going to explain all the steps I've done. I will try to simplify driving to the maximum.
In attached you will find the APK and the TPK that I used (the credits for both go to those who upload them in the forum; thank you very much), and old version of SDB (2.2.6.0).

Of course, everything will be AT YOUR OWN RISK, so you need to know what you are doing!

0) Enable debugging and "Developer Options" on the GWA2, activate WiFi (same network where the PC is connected, the guide concerns only Windows, sorry for this)
1) Download the attached files and dezip it
2) Download and install TizenStudio 3.7 with IDE installer (608MB)
3) Start TizenStudio, at the top you will see a box with "No target" written, click on the drop-down menu and choose "Launch Remote Device Manager" click on "Scan" and you will find your watch.
4) Click on "Connect ON" and accept the connection on the watch. Once connected, open the folder containing SDB 2.2.6.0, CMD, "sdb install bp.tpk"

If you have installation problems you have to try these ways
- on the watch activate wi-fi, deactivate bluetooth, restart the GWA2, retry steps 3) and 4)
- if you have not solved, you must reset the smartwatch, re-associate it with your smartphone and repeat steps 0), 3) and 4).

Let me know if you have difficulties and where, forgive my English but it is the result of Google Translator

Muchas gracias, hecho

[kabutor]

Originalmente Escrito por tontomele

Okay, I'm going to explain all the steps I've done. I will try to simplify driving to the maximum.
In attached you will find the APK and the TPK that I used (the credits for both go to those who upload them in the forum; thank you very much), and old version of SDB (2.2.6.0).

Of course, everything will be AT YOUR OWN RISK, so you need to know what you are doing!

0) Enable debugging and "Developer Options" on the GWA2, activate WiFi (same network where the PC is connected, the guide concerns only Windows, sorry for this)
1) Download the attached files and dezip it
2) Download and install TizenStudio 3.7 with IDE installer (608MB)
3) Start TizenStudio, at the top you will see a box with "No target" written, click on the drop-down menu and choose "Launch Remote Device Manager" click on "Scan" and you will find your watch.
4) Click on "Connect ON" and accept the connection on the watch. Once connected, open the folder containing SDB 2.2.6.0, CMD, "sdb install bp.tpk"

If you have installation problems you have to try these ways
- on the watch activate wi-fi, deactivate bluetooth, restart the GWA2, retry steps 3) and 4)
- if you have not solved, you must reset the smartwatch, re-associate it with your smartphone and repeat steps 0), 3) and 4).

Let me know if you have difficulties and where, forgive my English but it is the result of Google Translator

funcionando, me faltaba las opciones de desarrollador, gracias por la aclaracion en el video

Un saludo

[stopa7111]

Originalmente Escrito por tontomele

Okay, I'm going to explain all the steps I've done. I will try to simplify driving to the maximum.
In attached you will find the APK and the TPK that I used (the credits for both go to those who upload them in the forum; thank you very much), and old version of SDB (2.2.6.0).

Of course, everything will be AT YOUR OWN RISK, so you need to know what you are doing!

0) Enable debugging and "Developer Options" on the GWA2, activate WiFi (same network where the PC is connected, the guide concerns only Windows, sorry for this)
1) Download the attached files and dezip it
2) Download and install TizenStudio 3.7 with IDE installer (608MB)
3) Start TizenStudio, at the top you will see a box with "No target" written, click on the drop-down menu and choose "Launch Remote Device Manager" click on "Scan" and you will find your watch.
4) Click on "Connect ON" and accept the connection on the watch. Once connected, open the folder containing SDB 2.2.6.0, CMD, "sdb install bp.tpk"

If you have installation problems you have to try these ways
- on the watch activate wi-fi, deactivate bluetooth, restart the GWA2, retry steps 3) and 4)
- if you have not solved, you must reset the smartwatch, re-associate it with your smartphone and repeat steps 0), 3) and 4).

Let me know if you have difficulties and where, forgive my English but it is the result of Google Translator

coño ponlo en español.

[vicentelme]

Lol

[tontomele]

Originalmente Escrito por stopa7111

coño ponlo en español.

Pon algo de tu parte

[chibudo]

Buenas, hay que poner el reloj en algún modo para que el ordenador lo reconozca.. Saludos y gracias.

[guicholuis96]

https://www.reddit.com/r/GalaxyWatch..._pressure_app

Ahi esta todo muy bien explicado y resumido.
Por cierto ya lo probé y es muy acertado comparado con mi medidor de presion digital. Lo unico mal que he visto es que la frecuencia cardiaca la mide diferente a lo que el reloj muestra en shealth (Cambia como unas 8 pulsaciones en el mismo instante de tiempo) y aun no puedo sincronizar los datos con shealth aunque ya le di los permisos necesarios.

Pero bueno pequeños errores para una funcion que se supone saldrá oficialmente en 3 meses y que seguramente la app de xda no es la ultima versión

[chibudo]

Muchas gracias, pero no soy capaz de instalar la aplicación al reloj, me sale en cmd como si el archivo estuviera corrupto, todo lo demás es correcto.

[albertro]

Pues yo soy incapaz de que me encuentre el Tizen studio el reloj

[chibudo]

Yo ya lo he conseguido, he tenido que probar con 3 portátiles, al final con uno de ellos... Por cierto la app del móvil la tenéis es español o solo esta en inglés.?

[vrolok]

Ojo que Malwarebytes detecta un malware en la app del móvil. Sólo Malwarebytes, con otros antivirus que he probado sale limpia. He desinstalado la app... una pena porque ya era unos cuantos días que la probaba y me funcionaba estupendamente.

[biel]

Originalmente Escrito por chibudo

Yo ya lo he conseguido, he tenido que probar con 3 portátiles, al final con uno de ellos... Por cierto la app del móvil la tenéis es español o solo esta en inglés.?

Me pasa lo mismo, alguna solucion?

[kabutor]

Originalmente Escrito por biel

Me pasa lo mismo, alguna solucion?

Esperar a que salga la oficial

[aguuis]

Se sabe cuando estaría disponible de manera oficial?