Cita: Originalmente Escrito por
p4bl0t32
Hola, te hago una consulta, me pasó lo mismo que a vos, compre el modelo que viene con firmware G970U y no se me actualiza, por lo que quiero cambiarlo al G970U1.
Ya me baje el último firmware del modelo G970U1, con CSC XAA.
Ahora, mi duda surge al tratar de instalarlo con Odín, ya que en el archivo .ZIP hay 5 archivos (empiezan con las letras AP, BL, CP, CSC, y HOME). Después de leer en el foro XDA con el traductor de google, no me queda claro si tengo que instalar los 5 archivos o solo el que empieza con las letras AP.
Desde ya muchas gracias!
Te pongo las instrucciones, tal y como viene en la página de sammobile:
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.