[fernnanndo]

Muchas gracias 3navis. Hice lo que me dijiste y el resultado es el siguiente :

 Cita:

cmd
Command error !!!

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=hynix_hyh0ssj0mf3p
DEVICE ID=0xBA
DEVICE MAKER ID=0xAD
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 20 (0x14) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x780
Partition[2], type=0x25, start=0C0, total=0xA980
Partition[3], type=0x4, start=0xB740, total=0xFB80

CE Total Length(with sector info) = 0x5BFBA00
CE CheckSum Length(without sector info) = 0x5BA0000

La Rom que tengo instalada en estos momentos es la NiAx Polaris 6.1.90 Alias Iolite