Cita: Originalmente Escrito por
mediavilla
Con qué ROM se te ha brickeado y en que O.S. lo estabas intentando?
Entonces, Dinodirect os la va a arreglar o enviar otra?
Está todo arriba, Custom Rom de Oma 3.1 (4.2.2) intentado flashear con windows 8
kusuku y rreinadev:
probad esto, aunque yo os adelanto que a mi en windows 8 no me funciona, esta tarde/noche lo probaré en un pc con windows 7 a ver que tal:
---------CROSS POST From XD@FORUM-----------CREDIT TO OMA-------------
http://forum.xda-dev...=2310818&page=3
RKFlashTool=included in Oma firmware, simpler tool
RKBatchTool=Factory Tool
================================================== ====================
How to start tab in Flash-Mode after flash went wrong :
- start RK-Flashtool with admin rights (click right)
- power supply and USB cable plugged
- hard-power off (hold power until screen go black or 20 sec)
- now the kernel will be loaded again (kernel-logo: Padmini A9 4x) to switch to charge mode
- wait until battery pictogram disappear
- press immediately Vol-up and Power together (3-4 sec, until you hear a PC-sound)
- if necessary install usb driver via device manager
- you are now in Flash-Modus (Found in RK-Flashtool / USB-ID 2207:310b)
If the kernel wont start (no kernel-logo) we need RK-Batchtool (factory tool):
- start RK-Batchtool with admin rights (click right)
- power supply and USB cable plugged
- hard-power off (hold power for 20 sec)
- press and hold Vol-up
- release a reset by unplug/plug the power supply (wait 10 sec between unplug and plug)
- repeat until tool shows connected/green (you hear a PC-sound)
- if necessary install usb driver via device manager
- load stock update.img and press restore
Factory tool will not stop if you have defects on the NAND. Please never interrupt a flash!
Good luck!
- Oma -
Por cierto, yo la compré en aliexpress, la china ya me ha dado la dirección para que se la devuelva, de todos modos quiero probar una vez mas en otro SO.
Saludos.