[hecvalve]

Changelog:

Release 5 FINAL [10.09.2013]

ROM Changes:
*Updated sensor demons and deleted the outdated sensors.GT-I9001.so (credits to CastagnaIT)
*Use opensource libsensors (credits to CastagnaIT)
*Kernel 3.4.60 (Phenom Kernel v4.8 370MB exUV)

Release 4 [24.08.2013]

ROM Changes:
*Rebase on DevCon Device Tree
*AriesParts: Updated cm device settings with tab layout (CM 2013) (thanks to CastagnaIT)
*AriesParts: VibrationPreference: shows the value of strength in percentage (thanks to CastagnaIT)
*AriesParts: Russian translation (Thanks to Shram32)
*MMS: Updated German Translations (thanks to Rhonin86)
*Phone: Updated German Translations (thanks to Rhonin86)
*Settings: Updated German Translations (thanks to Rhonin86)
*Final updates on the 4.2.2 branches from the Liquid Smooth Team
Performance Control v2.0.9:
*New DiskInfo TAB - display the total and free space of: /system. /data, /cache, /sdcard, /ext-sd partitions
*Added Optimize Databases (SQLite Vacuum) - Tools Tab
*Change Fix Permission script for better compatibility with CM-10.2
*Added Tab Menu (manage all tabs from one window -> accessible through the Menu key)
*Added German and Romanian translations (thanks to Rhonin86 and Laurentyu1995)
*Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
*Added "Fix Permission" option (as it is removed from newer CWM recoveries)
*Added "Clean Residual Files" option *Minor Bug Fixes
*UI Improvements
Kernel Changes:
*Phenom Kernel v4.7 (3.4.59)
*writeback: Fix occasional slow sync (credits to Jan Kara)
*Better support for VPN over IPsec (credits to Christopher83)
*Bluetooth: Fix for the l2cap layer crashes while turning OFF BT (credits to Nitin Shivpure)


Release 3 [03.08.2013]

ROM Changes:
*Loads of HALO updates/bigfixes (full list here)
*Liquid Smooth v2.9 Official Changelog
*Kernel 3.4.55 (Phenom Kernel v4.5 360MB UV)
*Sync to latest CM/LS Sources
Performance Control: (credits and thanks to h0rn3t)
*Added the ability to flash kernels and recoveries from the /sdcard Supported devices: GALAXY S PLUS, GALAXY W, GALAXY S IV (Qualcomm Variant), GALAXY NEXUS, NEXUS 4, HTC ONE X
*Some minor UI Changes
Liquid Recovery:
*CWM 6.0.3.5
*No more Fix Permissions option (deprecated, read this)
*Shutdown option
*Reboot to bootloader option (Download Mode)
*Minor UI Changes


BETA 2.5 [20.07.2013]

*Update Performance Control Low Memory Killer UI (credits to h0rn3t)
*Sync to latest CM/LS sources

Release 2 [17.07.2013]

*Bump LS to version 2.9
*Built with SaberMod GCC 4.7 toolchain (with some more optimization flags)
*Revert back to system defined dalvik heap (credits to arco) *Enabled world phone preferences menu (credits to CastagnaIT)
*Fix audio in Hangouts (credits to Steve Kondik)
*Put back dalvik.vm.dexopt-data-only=1 (credits to arco)
*MMS: Fix possible NPE; Mms: switch inverted text color back (credits kufikugel)
*HALO is a trusted overlay (yes, you can install APK's while it's ON)
*HALO: Size customizability
*HALO: Add more coloros *HALO: Tablet mode support
*HALO: New vertical gestures
*Other changes for HALO from PA team
*Privacy Guard Manager: Settings->Security->Privacy Guard (CM)
*Updated German Translations for HALO (thanks Rhonin86 for help)
*New USB Mass Storage Interface logo (replace the SlimBean one with the Liquid Smooth one)
*Remove Torch App
*Sync with latest CyanogenMod sources (CM-10.1.2)
Kernel Changes:
*Version 3.4.53 (Phenom Kernel v4.4 UV)
*Added DoNotKillProcesses from Christopher83 Performance Control: (credits and thanks to h0rn3t)
*NEW BATTERY TAB - View current battery voltage - View current battery status - View current battery Temperature - Fast Charge Toggle
*Memory Settings: - Enable/Disable Not Killable Processes - Set the Processes Whitelist
*NEW TOOLS TAB: - Set a custom shell command which will be executed at every boot - Wipe Cache and Dalvik cache (directly from the app, without booting into recovery)

Recovery:

*New Liquid Smooth Recovery (CWM 6.0.3.3)

Release 1 [04.07.2013]

*First official build
*Bump LS version to 2.8
*New Phenom Kernel v4.2.0 (synced with latest changes made by arco)
*Set resampler quality (credits to arco)
*Privacy Guard fix possible NPE (credits kufikugel) -hopefully those bootloops after Gapps flash are fixed now
*Update Performance Control (credits to h0rn3t) -more stability with kernels without VDD Sysfs interface
*New static boot image (credits Stefano187 and Christopher83)
*Sync to latest CM/LS sources


28.06.2013

Released Liquid Recovery (CWM 6.0.3.2)
Released Performance Control App (already present in Liquid Smooth)
Released Liquid Smooth BUILD 8

BUILD 8
*Fix HALO Settings (you can now disable HALO and the settings take effect)
*Privacy Guard Support
*Remove Torch app
*Remove Display Backlight timeout & Backlight on touchscreen from AriesParts
*Add Backlight timeout & Backlight on touchscreen to Performance Control (credits h0rn3t)
*Exclusive release of Phenom Kernel v4.0.7 UV (based on 3.4.51)
*Liquid Smooth Official Changelog *Sync to latest CM/LS sources

BUILD 7 [25.06.2013]
*Fixed Charging animation when device is off (again)
*Fixed Bootanimation (thanks to @Pat_Man)
*Updated AriesParts (Ariesve DevCon Team)
*Added PKF Manager and Dynamic Fsync control to Performance Control app (thanks to Christopher83 and h0rn3t)
*Speed up statubar/notification drawer (thanks to deadman96385 and IceColdJelly)
*Sync with DevCon device tree (Release 2)
*Sync with CM10.1.0 Final sources
*Update kernel (Phenom Kernel v4.0.6 360MB UV 3.4.50)

BUILD 6 [21.06.2013]
*HALO works now
*Performance Control changes by @h0rn3t:
- Reduce time spend at boot when a lot of values need to be saved.
- Minor UI updates

UNOFFICIAL [19.06.2013]
*Bump Liquid Smooth version to 2.7
*Fixed WiFi Tethering (thanks to Christopher83)
*Enable Volume Rocker Wake (thanks to arco)
*HALO (still in Beta stage - I'm not sure how to activate it yet)
*Sync to latest CM/LS sources Modded and adapted performance control by @h0rn3t - thanks mate
*VDD Levels customization now works properly (yes, you can change the Voltage Values now, without getting FC)
*More stable app (fix for some FC's)
*Added the ability to customize BLX values (only if the kernel supports it)

KERNEL CHANGES:
*Fixed the high brightness for a second when turning on the display (thanks to Krislibaeer) *Corrected auto-brightness values (thanks to Christopher83)
*Tweak the lowest brightness level (now you can set the screen brightness even lower)


NIGHTLY [09.06.2013]
*Switch to 3.4.47 Kernel (Phenom Kernel v4.0.2 UV 360MB) - compatible with other 3.4 kernles
*Fixed battery charging when device is shutdown
*O3 optimized build *Using DevCon device tree
*Sync CM repo to RC5 *Sync to latest LS sources
BUG: Only the power button is able to unlock the screen.

Build 5 [27.05.2013]
*Update Kernel (Phenom Kernel v3.9.4)
*Bump to v2.5
*Sync Liquid Smooth/CM repo
*Sync CM and LS sources

Build 4 [19.05.2013]
*Official Liquid Smooth v2.4 changelog
*BUILT WITH LINARO GCC 4.6.4 TOOLCHAIN OPTIMIZED FOR CORTEX A8 CPU WITH NEON TECHNOLOGY SUPPORT (credits to Christopher83)
*Fix reboot when using Google Maps/other apps (this time for good)
*Fixed graphical glitches on bootanimation (credits DualJoe)

Build 3 [16.05.2013]
*Bump Liquid Smooth version to v2.4
*Fix reboot when using Google Maps/other gapps
*Use Equalizer, Visualizer and Bass Boost CM libraries for DSP Manager (credits broodplank) *Sync with some changes made by arco for ancora
*Some minor stability improvements
*Sync with latest CM/LS sources

Build 2 [14.05.2013]
*Fixed Front Camera Orientation
*Enabled the DSP Manager Library - really good bass sound improvement (inspired from broodROM Jelly Bean, thanks to broodplank for finding this one)
*Fixed Reboot when connecting USB the first time (make sure to enable USB Debugging)
*Removed Torch
*Synced with Liquid Smooth v2.3.1 & CM10.1.0 RC2 repos
*Kernel 3.0.78