Tema: [ SOLUCIONADO ] Inicio error
Ver Mensaje Individual
  #32  
Viejo 11/05/13, 03:00:27
Array

[xs_avatar]
JacksSsS JacksSsS no está en línea
Usuario muy activo
· Votos compra/venta: (46)
 
Fecha de registro: jun 2009
Localización: Sevilla
Mensajes: 14,446
Modelo de smartphone: Huawei Mate 20 Pro
Tu operador: Vodafone
Pero a ver... Si te lo he explicado y te lo he pegado...

1.- te bajas adb / fastboot.o el AndroidSDK
2.- te bajas una stock rom como la que te ha dicho fixit
3.- renombras esa rom que te has bajado a ROM.zip
4.- Te metes en la carpeta donde hayas descomprimido adb/fastboot y metes ROM.zip
5.- Te pillas el teléfono y lo metes en recovery siguiendo los siguientes pasos:
 Cita:
- Boot your phone into Recovery and select the "Mounts & Storage" screen

- Plug your phone into your computer using USB Data Transfer Cable

- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount)

- Open Command Prompt on your computer by doing Start -> Run -> cmd

- In Command Prompt, type "cd c:\AndroidSDK\tools" replacing AndroidSDK\tools with wherever your adb and ROM are located.

- This is probably the most important part - Still in Command Prompt, type "adb push ROM.zip /sdcard/ROM.zip" replacing ROM with the EXACT name of the ROM file and including the .zip piece on both ends. This may take a minute or two...or four, but you will see a message in Command Prompt saying something like <12345678kb to 1234567kb>. That is just telling you that the file was pushed properly. (I did not include that message in the picture below)


- Once this has completed, unplug your phone from your computer and close the Command Prompt window

- Back in Recovery, go to Recovery's main screen and Do a "Factory Reset", "Wipe Cache Partition", and "Wipe Dalvik Cache [which is in the Advanced menu of Recovery]"

- When these are all done, from Recovery's main screen, select "Install ZIP from SD Card" and then "Choose file from SD Card" and select the ROM.zip file you just pushed from your computer to the SD Card. If you do not see the file, go back to Mounts and Storage and toggle them to say "Mount /sdcard/" and "Mount /system/" and then go back and try to fine the ROM.zip file. If you still do not see it, it was not pushed correctly...go back and ensure you were letter for letter with the name and the file path.

- Once the screen in Recovery says "Install from SD Card Complete.", go back to Recovery's main screen yet again and select "Reboot system now" - If your device fails to Install the ROM.zip, I had this happen to me. You must push the CWM SuperSU ZIP (the .zip file is found at the end of this thread)file as outlined before and Install THAT .zip file in Recovery, then reboot Recovery and Install the ROM.zip from SD Card.

- Let your phone have some time to boot up...initial boot from installing a new ROM have histories of taking a couple minutes.
Poco más puedo hacer por tí, como no quieres que te lo traduzca o vaya a tu casa a ponertelo bien... o que te lo haga de forma remota que en cualquier caso estamos hablando de un servicio ya es otro cantar
__________________
- Corsair iCue 220T RGB / MSI X570 Tomahawk / Ryzen 9 3900X / Corsair H100i AIO RGB / Corsair Vengeance RGB Pro 32Gb DDR4-3200 / MSI GeForce RTX 2070 Ventus GP 8Gb GDDR6 / Corsair RM750 Gold 80 / Kioxia Exceria Plus 1Tb M.2 MVNe / HDD 2Tb Seagate / Dell 31.5" S3220DGF // Lenovo 15ADA05 / Ryzen 5 3500U / 8Gb DDR4-2400 / 256Gb NVMe / 15.6" FullHD
Responder Con Cita
Gracias de parte de: