[Tablerone]

Originalmente Escrito por vejeta

Sigo sin saber qué archivo ejecutar una vez conectado el móvil... saludos.

No hace falta más que flashear el ejecutable que hizo Stefan, esta ya viene con la V28G, root y CWM.

Originalmente Escrito por jackdragma

Pues la verdad es que no entiendo muy bien el proceso de root, ¿parece como si solo utilizara smartflash no? corrígeme si me equivoco por favor.

Las instrucciones son estas:

Installation NVFlash version (under Windows): = Full wipe, and also wipes Internal SD (not External though)

• download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
• take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
• screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked. Tutorial on driver installation: http://www.modaco.com/topic/335416-n...-links-active
• assuming that you already installed APX drivers: run the "flashme.bat" file in the folder where you extracted the ROM
• if your device is properly connected, a terminal window will be opened for some minutes, showing the Flashing progress
• once flashing is done, the window closes or notifies you that it is finished. Wait 30 seconds and then unplug phone, put battery back in and boot your brand new ICS!
• That's already it No complications to be feared. Enjoy!

Y el zip con todo lo necesario para el NVFlash:

http://d-h.st/VZp