Les traigo el kernel recien salido del horno, Thor kernel para JB. Tiene soporte bln entre otras cosas mas. les dejo las caracteristicas.
Changelog:
New Thor Kernel Galaxy Note v0.31(Custom JB based on CM10 ONLY):
i/o scheduler tweaks
usb tweaks
cpu oc(from 100mhz to 1.7ghz) and uV+oV
gpu oc(default 4 step freq table 100/160/267/400mhz)
wifi updates/tweaks
many many many many many driver updates/tweaks
fixed tvout(works only with hw decoded files)
memory optimizations
cpu optimizations
mtp/ptp/mass storage modes work
fully custom kernel does not have mmc bug
epen offset change support
bln support
drivers for xbox/ps3/wiimote controller
usb cdrom drive support(still needs manual mount)
HFS and HFS+ support
NFS support
nfs and cifs support
charging current sysfs control(usable in voltage control app)
tegrak 2nd core control interface
linaro optimized
0.19-2: fix VSYNC mode for JB
0.19-2: added Google's synchronization framework
0.20: new mali driver r3p0
0.20: gpu voltage and speed control interface
0.20: back to 4 step gpu speeds
0.20: increased the gpu speed timeout to 1.5s
0.20-2: switch to a 3 step gpu speeds(160/267/400MHz)
0.20-2: fixed voltage and speed interface
0.20-2: should be smooth as butter
0.21: kernel optimizations
0.21: disabled 100mhz freq because of issues
0.21: fixed sometimes the screen off animation wouldn't show
0.21: memory optimization
0.21-2: added volumes interface for xxTweaker
0.22: mali gpu tweaks
0.22: kernel tweaks
0.22: hotplug cm10 patch
0.22: mali cm10 patch
0.23: more kernel optimizations
0.23: i/o optimizations
0.23: update recovery base to 6.0.1.5
0.23-2: compiled with new linaro 2012-10
0.23-2: optimizations to lowmemorykiller
0.24: add 1770mhz freq(don't expect it to work on all phones... the cpu heats up quite fast...)
0.24: readd 100mhz freq(careful some phones may lose signal on this freq)
0.24: added thermal limit change interface(look below for instructions)
0.24: fixed touchscreen not retaining threshold(sensitivity) change after suspend
0.24: fixed lowmemorykiller free ram value
0.24: "/sys/devices/platform/s5p-tmu/curr_temp" is no longer celsius*10 just celsius...
0.24: build with newer linaro compiler
0.24-2: some code cleaning...
0.24-2: removed complier flag
0.24-2: build with newer linaro compiler
0.25: tweaked board voltages
0.25: memory tweaks
0.25: switched I/O to cfq
0.25: vfp tweaks
0.25-2: fixed memory mapping(a good memory performance boost)
0.25-2: fixed buggy voltage regulator
0.26: rewrite gpu interface
0.26: tweaked/rewrite part of the cpu hotplug driver
0.26: recalculated freq 1770 to 1760
0.26: vfp tweaks
0.26: tweaked cpu performance
0.27: note2 modem driver
0.27: add vr io scheduler
0.27: add zen io scheduler
0.27: switch io from cfq to zen by default
0.27: tweaked bussfreq
0.27: tweaked cpu
0.27: updated lulzactiveq gov
0.27: improved touch responsiveness
0.27: tweaked mali driver
0.28: fixed support for 2nd core app
0.28: fixed cpufreq cpu speed setting
0.29: fix exynos-mem permissions
0.29: tweak cpu
0.29: add mr1 build aka cm10.1 support
0.29: tweak video driver
0.30: fix lowmemorykiller adj interface not getting created
0.30: fix gpu control interface
0.31: rewrite part of the gpu driver + interface rewrite
0.31: add row iosched
0.32: tweak cpu
0.32: removed google change to lowmemorykiller
0.33: new modem driver
0.33: tweak lowmemorykiller
0.33: update binder
0.33: update to 3.0.57
0.33: config tweaks
0.34: fixed mali_dvfs_utilization interface
0.34: posible fix for mr1(cm10.1) recovery
0.34.1: mali utilization timeout interface fix and rename to mali_utilization_timeout
Changelog menu recovery:
Thor Touch Recovery Galaxy Note v1.9:
backup/restore efs partition
backup/restore modem partition
install from internal/external memory
backup to internal/external memory
custom power menu
custom wipe menu
mount to usb mounts internal/external memory
recovery at boot shows real kernel version
touch buttons at the bottom
touch gesture control(swipe up/down - moving || swipe left/right - back/enter)
mounting as mass storage works
hw buttons light up
Descarga kernel thor v0.34.1:
http://api.viglink.com/api/click?for...13582188268254
Descarga kernel thor v0.34.1 Para cm10.1:
http://api.viglink.com/api/click?for...13582188578215
Aplicación xxTweaker:
http://www.mediafire.com/?a0rki03tdt6822j
Instalación: se flashea desde el menu recovery, con wipe cache y dalvik. Ojo, funciona solo en rom basadas en cm10 y la version mr1 para las cm10.1
Link original:
Ir al link original: http://forum.tegraowners.com/viewtopic.php?f=35&t=807