Cita:
Originalmente Escrito por satyr
Vaya, me cargue todo lo que tenia y ahora me dice que no hay default.txt Creo que me tocara meter antes una anterior por lo que veo.
|
Pongo el original. Copia el texto y ponlo en un archivo startup.txt.
Cita:
set RAMSIZE 0x08000000
set MTYPE 1805
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing #777
# ppp.password - The password used to connect to the network when dialing #777
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 3, use 0 for best power savings
# board-htcvogue.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Hitachi 2=Topoly 3=Samsung
# mddi.width - width of the scaled display
# mddi.height - height of the scaled display (these should be multiples of 16 for the camera to work I think)
set cmdline "msmts_calib=115.105.863.911 msmvkeyb_toggle=off mddi.width=320 mddi.height=480 lcd.density=240 ppp.apn=movistar.es ppp.username=MOVISTAR ppp.password=MOVISTAR no_console_suspend"
#set cmdline "no_console_suspend"
# fbcon=rotate:1
# console=ttyMSM0"
boot
|