Buenos días,
Ya tengo rulando el Android en mi Diamond100, pero lo de editar el default.txt no lo llevo tan bien. Me da errores de como si no estuviese bien escrito o algo :S , os añado lo que pongo en mi Startup.txt
Código:
set RAMSIZE 0x08000000
set MTYPE 1805
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing #777
# ppp.password - The password used to connect to the network when dialing #777
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 3, use 0 for best power savings
# board-htcvogue.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Hitachi 2=Topoly 3=Samsung
# mddi.width - width of the scaled display
# mddi.height - height of the scaled display (these should be multiples of 16 for the camera to work I think)
set ppp.apn=airtelwap.es
set ppp.username=wap@wap
set ppp.password=wap125
set cmdline "msmts_calib=115.105.863.911 msmvkeyb_toggle=off mddi.width=320 mddi.height=480 lcd.density=240 ppp.apn=movistar.es ppp.username=MOVISTAR ppp.password=MOVISTAR no_console_suspend"
#set cmdline "no_console_suspend"
# fbcon=rotate:1
# console=ttyMSM0"
boot