Changelogs:
Version 2.1.2
1/ Linux 3.0.46
Versión 2.1.0
1/ Linux 3.0.44
Versión 2.0.9f
1/ Linaro 2012.09
2/ Added camera fix done by @Tungstwenty
Versión 2.0.9e
1/ Disabled JRCU, back to RCU
Versión 2.0.9d
1/ Phenomal tweaks for memory and LCD voltages (thanks @@fenomeno83)
2/ Another review of chargecurrent settings
(PLEASE DO A WIPE CACHE, first boot will be longer anyway)
Versión 2.0.9c
1/ JRCU (thanks @simone)
2/ New chargecurrent settings (again with 4th settings)
Versión 2.0.9b
1/ Linux 3.0.43
2/ New chargecurrent settings
Versión 2.0.9
1/ Another new boot logo
2/ Added bus voltage into sysfs
3/ Merge with Siyah's initramfs (CM10 video issue ++)
4/ Added /sdcard/.nobootlogo
Versión 2.0.8c
1/ Linux 3.0.41 and 3.0.42
2/ Readded Ondemand governor
Versión 2.0.8b
1/ Linux 3.0.40
Versión 2.0.8
1/ Linaro 2012.08
2/ Linux 3.0.39
3/ Back to Revert max8997: Allow 700 mV on buck3 (too long to exit deep sleep)
Versión 2.0.7e
1/ Samsung update 5/6/7 sources
2/ Linux 3.0.37 and 3.0.38
3/ bluetooth: support for 4.0.4 stock ROMs
4/ net: wireless: bcmdhd: update bcmdhd driver to 1.15.15
5/ CM10 compatibility (thanks @gokhanmoral)
EDIT : For 4.0.4 ROM users, there is an excellent camera fix done by @Tungstwenty you can install through CWM :
HERE
Versión 2.0.7a
1/ Linaro toolchain 2012.07 (gcc 4.7.2)
Versión 2.0.6
1/ wakelock: main_wake_lock fix by tungstwenty
2/ Added -mfpu=neon to Makefile (thanks @voku)
3/ From NEAK 2.1 : cpufreq: another change to stop Level not found issue (might help slow mo)
4/ drivers: conservative and abyssplug, sampling rate modification
Versión 2.0.5d
1/ Merge with Siyah 3.3.3c
2/ mach-exynos: mach-u1: Allow 700mV on buck3 (@thanks dorimanx)
3/ bcmdhd: Change packet filter settings to block multicast
4/ Revert: block: sio tweaks
5/ mali: allow 700 mV as minimum for GPU
Versión 2.0.4
1/ New bootlogo ("Déchainez votre mobile" thanks @mr.mout)
2/ max8997: Allow 700 mV on buck3
3/ Revert : max8997: Allow 25 mV steps on buck3
4/ From myfluxi kernel : mach-exynos: busfreq: Add undervolt option using asv table
&& Add options for up- and down threshold
5/ Added SU and SuperSU 0.93
6/ Revert UV -50 mv into default profile
7/ Lower voltages for 200 MHz
Versión 2.0.3
1/ Revert : max8997: Allow 700 mV on buck3
2/ Legacy hotplug is back
3/ Some debug flags unset
4/ NOOP is default profile scheduler
5/ Undervolting -50 mV within default profile
Versión 2.0.2
1/ Voodoo louder compatibility is back (sorry)
2/ Some makefile merge from myfluxi kernel (thanks @myfluxi)
3/ From myfluxi kernel :
max8997: Allow 700 mV on buck3
max8997: Allow 25 mV steps on buck3
Versión 2.0.1
1/ Revert to gcc 4.6.3 (Linaro 2012.03)
2/ Revert to conservative
Versión 2.0
1/ Linux 3.0.36
2/ Linaro 2012.06 (GCC 4.7.1)
3/ Merge with Siyah 3.3.2
(extweaks profiles should be reseted during installation but you can use my script to save them before)
Versión 1.8
1/ Linux 3.0.35
2/ SuperSU 0.91
3/ Some reverts from Ikki merge
4/ arm: remove "optimized" SHA1 routines
5/ Added Abyssplug with some tweaks from my GS3 testings (credits @Angelom)
6/ net: wireless: bcmdhd: update wifi drivers (from i9300 sources)
Versión 1.7
1/ Linux 3.0.34
2/ Linaro 2012.05 (gcc 4.7.1)
3/ block: sio tweaks
4/ mmc: n7000 changes without enabling MMC_CAP_ERASE
5/ Few others fixes
Versión 1.6
1/ Linux 3.0.33
2/ mdnie: toggling mdnie negative effect with home button
3/ Revert bad cherry pick (kernel/sched.c : ONLINE)
4/ mc1n2: Add GT-N7000 call audio support
Versión 1.5
1/ Added a way to change logo into CWM
2/ Merge cpu settings from Ikki (hotplug, deepsleep level, L4=800 MHz freq max enabled, ...)
Versión 1.4
1/ Staging: android: binder: Fix crashes when sharing a binder file between processes
2/ From Siyah : sched: fix cpu index check in get_cpu_nr_running function
3/ mc1n2: Add interface for volume registers (thanks @myfluxi)
4/ From Siyah : touchscreen: mxt224_u1: use platform data struct directly to set touchscreen threshold values
5/ ld9040: increase boot gamma level to original GAMMA_160CD level
6/ max8997: Implement Accessory Charger Adapter support.
Versión 1.3
1/ modem_if: update modem driver to update5 sources
2/ mach-exynos: tmu: add tmu sysfs for temperature reading (from update5 sources
3/ net: wireless: bcmdhd: disable ESCAN_RESULT_PATCH (from Siyah)
4/ usb: gadget: composite: Fix corruption when changing configuration
5/ [MMC] Patch the firmware of certain Samsung emmc parts to fix a bug
6/ Revert "usb: otg: merges with sztupy's usb host mode build 5 changes in his nexus s kernel"
Versión 1.2
1/From Siyah : cypress: touchkey refactorings, cleanup and guards against voltage&led status modifications when in deep sleep which cause slowness bug
2/ mDNIe: adjustable color settings (thanks to sakura)
3/ New boot logo
Versión 1.1
1/ Linux 3.0.32
2/ net: wireless: bcmdhd: another major update to broadcom drivers, from SHV-E110S sources.
3/ Revert "RWSEM_XCHGADD_ALGORITHM for ARM (R/W semaphores implemented using ARM atomic functions) by CodeAurora"
4/ GPU voltage +50 mV with default profile (use script to reset profile)
Versión 1.0
1/ bcmdhd : patches from Siyah 3.2.3
2/ mmc: increase mmc read and write timeout for some crappy cards.
3/ ld9040: adjust panel gamma order to have more smooth transitions in lower brightness levels
& panel gamma set changes to have lower brightness for low-light conditions
4/ from Siyah : cypress: led fadein/fadeout (inspired from myfluxi's repo).
& cypress: restore led regulator voltage after fading out
5/ mozilla boot-to-gecko (b2g) support. (thanks to pulser)
6/ cm9 sdcard mounts