Flash Instructions & Rom Setup can be found below :
Flash Instructions...
1. Boot phone into recovery (must be CWM5 or touch)...
2. Select factoryreset/Wipe Cache/Wipe Dalvik/Wipe Battery Stats...
3. Flash rom...
4. Re-boot phone back to recovery...
5. Remove from Charger/Usb if connected then Re-boot phone to system...
6. Once phone is booted wait for initialization to finish (This will take a little time), only touch screen when "SuperSU" ask's for 1 permission (select "Grant") ...
7. After permission has been asked you can go ahead & finish setting up phone...
8. Follow instructions below to the letter for setting up phone once you are on claystone home screen...
Enjoy Xperience ~ 3Dx pro...
Setup Instructions...
1. Select SuperSU, & update the binary when asked then open SuperSU...
2. Go to Settings,/"Default Access" & select "Grant"...
3. Go to "Show Notifications" & remove the tick from the box & exit SuperSU...
4. Now you must follow the instructions from here on in to the letter ok ?...
5. Open Terminal emulator app...
5. Type "su" then type "engengis"...
6. Press "y" (enter) at the disclaimer...
7. Now select no.1 (enter)...
8. Select no.1 again...
9. Now "Do not touch no.1. on this page". A full guide & explanation will be provided later regarding this option, Instead select no.2, no.4, no.5 & no.6... then enter "b" (enter)...
10. Now select no.2 & choose either DeadLine or Noop Scheduler (Noop is faster but less stable than DeadLine)...then type "b" (enter)...
11. Select No.3 & choose SD read-ahead cache size (2048kb for up to class4 sd & 3072 - 4096kb for class 6 - 10 sd then type "b" (enter)...
12. Now select No.4 & then select No.1 Then type "b" (enter)...
13. Now Ignore No.5 here. Messing with screen DPI will cause FC's if changed...
14. Select No.6, now choose No.8 first (makes a backup, if you don't do this your changes will not be applied (failsafe))... After no.8 Ignore No.1, select No.2, Ignore No.3, select No.4, No.5 & No.6 then type "b" (enter)...
15. Now select No.7, then choose No.5 (this enables Engengis" auto-updates over the air so you are always up to date)... then type "b" (enter)...
16. Now type "r" to re-boot your phone & apply all your changes...
