Hola soy usuario de un moto z play pero en este caso tengo un problema con un moto g4, hardbrick, me lo detecta la PC como "qualcomm hs-usb qdloader 9008". Baje el blankflash pero me aparece esto:
**** Log buffer [000001] 2017-07-13_20:54:49 ****
[ -0.000] Opening device: \\.\COM7
[ -0.000] Detecting device
[ 0.002] ...cpu.id = 2418 (0x972)
[ 0.002] ...cpu.sn = 18633329 (0x11c5271)
[ 0.003] Opening singleimage
[ 0.003] Loading package
[ 0.007] ...filename = singleimage.pkg.xml
[ 0.010] Loading programmer
[ 0.010] ...filename = programmer.mbn
[ 0.011] Sending programmer
[ 0.229] Handling things over to programmer
[ 0.229] Identifying CPU version
[ 0.232] Waiting for firehose to get ready
[ 60.234] Waiting for firehose to get ready
[120.306] ...MSM8952 unknown
[120.306] Determining target secure state
[120.309] Waiting for firehose to get ready
[180.323] ...secure = no
[180.340] Flashing GPT...
[180.340] Flashing partition:0 with gpt_main0.bin
[180.340] Initializing storage
[180.345] Waiting for firehose to get ready
[242.845] Configuring device...
[242.848] Waiting for firehose to get ready
[305.350] Waiting for firehose to get ready
[365.354] Waiting for firehose to get ready
[425.412] Waiting for firehose to get ready
[485.682] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[485.682] Check qboot_log.txt for more details
[485.682] Total time: 485.684s
[485.682]
[485.682] qboot version 3.40
[485.682]
[485.682] DEVICE {
[485.682] name = "\\.\COM7",
[485.682] flags = "0x64",
[485.682] addr = "0x28FE6C",
[485.682] sahara.current_mode = "0",
[485.682] api.buffer = "0x2120020",
[485.682] cpu.serial = "18633329",
[485.682] cpu.id = "2418",
[485.682] cpu.sv_sbl = "0",
[485.682] cpu.name = "MSM8952",
[485.682] storage.type = "eMMC",
[485.682] sahara.programmer = "programmer.mbn",
[485.682] module.firehose = "0x20815C0",
[485.682] cpu.ver = "0",
[485.682] cpu.vername = "unknown",
[485.682] api.bnr = "0x20889E0",
[485.682] }
[485.682]
[485.682]
[485.682] Backup & Restore {
[485.682] num_entries = 0,
[485.682] restoring = "false",
[485.682] backup_error = "not started",
[485.682] restore_error = "not started",
[485.682] }
[485.682]
**** Log buffer [000001] 2017-07-13_21:03:31 ****
[ 0.000] Opening device: \\.\COM7
[ 0.000] Detecting device
[ 4.001] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.001] Check qboot_log.txt for more details
[ 4.001] Total time: 4.001s
[ 4.001]
[ 4.001] qboot version 3.40
[ 4.001]
[ 4.001] DEVICE {
[ 4.001] name = "\\.\COM7",
[ 4.001] flags = "0x64",
[ 4.001] addr = "0x28FE6C",
[ 4.001] api.bnr = "0x5328D8",
[ 4.001] }
[ 4.001]
[ 4.001]
[ 4.001] Backup & Restore {
[ 4.001] num_entries = 0,
[ 4.001] restoring = "false",
[ 4.001] backup_error = "not started",
[ 4.001] restore_error = "not started",
[ 4.001] }
[ 4.001]
Alguien me puede guiar que estaria faltando o si necesito el archivo singleimage.bin correspondiente? gracias de antemano
