Aqui esta el fichero 'parametros' original y sin tocar:
https://ufile.io/932731
por si acaso lo copio y pego a continuacion
#################################
PARMÃFIRMWARE_VER:5.0.0
MACHINE_MODEL:Pad971
MACHINE_ID:007
MANUFACTURER:Haier
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3288
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x62008000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
#CMDLINE:console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0 x00002000@0x00004000(misc),0x00008000@0x00006000(r esource),0x00008000@0x0000e000(kernel),0x00010000@ 0x00016000(boot),0x00010000@0x00026000(recovery),0 x0001a000@0x00036000(backup),0x00040000@0x00050000 (cache),0x00002000@0x00090000(kpanic),0x00300000@0 x00092000(system),0x00008000@0x00392000(metadata), 0x00200000@0x0039A000(userdata),0x00020000@0x0059A 000(radical_update),-@0x005BA000(user)
# in section; per section 512(0x200) bytes
CMDLINE:console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=t
#################################