DISPLAY_PATH_SEL[MDNIE 0x1]is on    MDNIE setting Init start!!  MDNIE setting Init end!!    UNKNOWN CHARGING_FULL   CHARGING    CHARGING_STOP   CHARGING_BATTERY_INVALID    CHARGING_UNKOWN_CHARGER CHARGING_RECHARGING charging.jpg    aries_pm_status %s: invalid battery vf!
    vsync interrupt is on   vsync interrupt is off  video interrupt is on   video interrupt is off  [fb%d] turn on
 Set cpu clk. from %dMHz to %dMHz.
Not connected!  ==> Welcome to %s!
ARIES   ==> Entering usb download mode..    saveenv movinand_write  movinand_write  %s: movinand initialization failed.
    >>> Download Address : 0x%x, len :%d
   part_header.FirstPart_Size : %d
    part_header.SecondPart_Size : %d
   part_header.ThirdPart_Size : %d
   Not found partition header in movinand image    This bootloader downloader does not support this movinand image mbr_struct.FIRST_PartTable.TotalSector : 0x%x
Modified mbr_struct.FIRST_PartTable.TotalSector : 0x%x
 card_total_sectors                       0x%x 
 MBR_SECTORS                              0x%x 
 mbr_struct.SECOND_PartTable.TotalSector  0x%x 
 mbr_struct.THIRD_PartTable.TotalSector   0x%x 
 mbr_struct.SECOND_PartTable.RelativeSector : 0x%x
  Modified mbr_struct.SECOND_PartTable.RelativeSector : 0x%x
 mbr_struct.SECOND_PartTable.TotalSector : 0x%x
 mbr_struct.THIRD_PartTable.RelativeSector : 0x%x
   Modified mbr_struct.THIRD_PartTable.RelativeSector : 0x%x
  mbr_struct.THIRD_PartTable.TotalSector : 0x%x
  1st p_fat32_bpb->BPB_TotSec32 : 0x%x
   Modified 1st p_fat32_bpb->BPB_TotSec32 : 0x%x
  <%s:%d> len : %d, current_partition_size : %d
  len : %d
   ## MOVINAND DOWNLOAD COMPLETE ##    Wrong partition ID : %d
    start %d partition fusing
  First Partition start_sector : 0x%x
    p_fat32_bpb->BPB_TotSec32 : 0x%x
   Modified p_fat32_bpb->BPB_TotSec32 : 0x%x
  Second Partition start_sector : 0x%x
   Third Partition start_sector : 0x%x
    display_aries_upload_image  IDontKnow       nRESET          nWRESET         nWDTRESET       SWRESET         SLEEP_WAKEUP    DSTOP_WAKEUP    DIDLE_WAKEUP    %s: upload code = 0x%x
 ani_upload_1_kernel_panic.jpg   ani_upload_2_cp_crash.jpg   ani_upload_3_forced_upload.jpg  ani_upload_5_user_fault.jpg ani_upload_4_power_reset.jpg    RST_STAT     = 0x%x 
   PMIC_IRQ1    = 0x%x 
   PMIC_IRQ2    = 0x%x 
   PMIC_IRQ3    = 0x%x 
   PMIC_IRQ4    = 0x%x 
   PMIC_STATUS1 = 0x%x 
   PMIC_STATUS2 = 0x%x 
   Warmreset + Volup Upload after WDT
 ODIN G a d g e t   S e r i a l  ,G a d g e t   S e r i a l   C o n t r o l 
ÿ  @     À   À  ÿ   ƒ@  @     À   À  ÿ   �    Check USB Connection ..........     OTG cable Connected!    Error : Current Mode is Host    [s5p_usb_print_pkt: %x, ]   Checksum is being calculated.   
Checksum O.K.  
Checksum Value => MEM:%x DNW:%x
   Checksum failed.
   sug: IN EP asserted DESCRIPTOR Transfer error.  OKAY    LOKE    - Odin is connected!    ATQ0    AT Cmd recieved!    Error:Invalid connection string!    [ERROR] wrong rx size!!!    process_upload_data %s: current command: %s
    usb_connection_status_update    %s - usb disconnected!
 ---> TX_TIMEOUT !!  ---> RX_TIMEOUT !!  EP2: %x, %x, %x; len=%x
    **** Error:Neither High_Speed nor Full_Speed    i2c_read    %s -> No Pending Interrupt! (0x%