Cita:
Originalmente Escrito por mickwo
Bien entonces confirmas lo que decia antes , que pasaba lo mismo con el Umi X1 Pro y cambiando el launcher se arregla, faltaba el paso de rootearlo
Despues se podria hacer una compilacion de las formas de arreglar los fallos que parece q nada grave son al final
|
Estuve por el facebook de Doogee
Doogee FB y me di cuenta que los problemas de la cámara los tenía también el DG2014 y los han solucionado ya. Creo que sería buena idea emplear algún medio así para nuestro dispositivo. Yo puse un comentario a ver si este problema de la cámara lo solucionan.
Creo que alguien ya lo puso, pero por si acaso, esta es la dirección con las actualizaciones de Software:
Actualizar DG350. La última fecha es del 4 de abril.
Por último, encontré un "manual" de actualización que parece ser algo general para este tipo de móviles. Os lo pongo y en cuanto alguien haga el post general que lo incluya si es de utilidad:
************************************************** ***************
Flash ROM with SP Flash Tool On MTK6595, MTK6592, MTK6589, MTK6572, MTK6582
Flash ROM with SP Flash Tool On MT6595, MT6592, MT6589, MT6572, MT6582, MT6577
If you’d like to know how to flash a ROM on MT6595, MT6592, MT6589, MT6572, MT6582, MT6577, you’re on the right post. Normally we refer people to a rooting post, which includes this information, as the procedure is mostly the same. But for the sake of simplicity, we’ll write a stand-alone tutorial.
Note, if you don’t have access to a backup, create one first -
Remember, we ARE NOT responsible for any hell that happens to your phone. You take any and all responsibility for messing with your phone.
What you’ll need:
•MTK / MediaTek based smartphone
•USB Data Cable
•USB ADB VCOM drivers
•SP Flash Tool
•MTK Droid Tools (if scatter not included with ROM)
What to do:
•Step 1 – Install the PDANet USB ADB VCOM drivers -
•Step 2 – Download, extract, and run the latest version of SP Flash Tools
İmage
•Step 3 – Check to see if a scatter file exists. Look in the firmware / ROM’s folder. You should see a file that looks similar to ‘MT6582_Android_scatter_EMMC.txt’. If you don’t see the scatter file, you need to create one with MTK Droid Tools. After you’ve created the scatter, place it in the same folder as the firmware / ROM you intend to flash.
İmage
•Step 4 – Select ‘scatter-loading’ from upper-right of SP Flash Tools. Navigate to the ROM / Firmware’s directory and you should see a file that looks something like MT6582_Android_scatter_EMMC.txt. Select this and you should then see a checklist of different parts of the ROM load in the bottom portion of SP Flash Tools.
İmage
•Step 5 – Deselect ‘preloader’ in the checklist. If you don’t want the firmware / ROM to mess with your current partitioning, deselect EBR1 and EBR2 as well. NOTE: If you’re sure you have the correct firmware for your phone, you can leave Preloader selected.
İmage
•Step 6 – Make sure the phone is disconnected from USB and powered off. Select ‘download’ from the top of SP Flash Tools. NOTE: If all portions of the firmware are checked, then you can select ‘Firmware Upgrade’. If you have problems with ‘Firmware Upgrade’ or vice versa, you can try the other one.
İmage
•Step 7 – Connect USB cable to phone and watch the pretty colors fly
If you run into any errors, please see this thread for a list of common problems and some possible fixes.
************************************************** ***************