Aparentemente la razón por la que el cel no arranca es por que hay bloques malos en la memoria flash, aqui está lo que salió al correr el comando "info 8"
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 6 (0x6) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 864 (0x360) is bad block <<<<<<<<<<ojo sector malo!!!
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x6C0
Partition[2], type=0x25, start=000, total=0x8640
Partition[3], type=0x4, start=0x9340, total=0x126C0
CE Total Length(with sector info) = 0x49E9A00
CE CheckSum Length(without sector info) = 0x49A0000
Creo que esta es la razón por la que no pasa del bootloader, hay una utilidad del MTTY que es el comando task 2a que supuestamente corrige los bloques dañados, pero las personas que lo han corrido han terminado matando el aparato y recomiendan no usarlo, porque realmente no se sabe lo que hace exactamente.
¿alguien sabe si se puede correr con seguridad esta utilidad?