Hola,
He seguido los pasos que se dan en el video, a saber:
- Instalo el SDK y el driver USB. Tras varios intentos fallidos me dice que ok.
- Me bajo el ultimo recovery de AMON_RA y lo pongo en el / de la card y en la carpeta /tools del SDK.
- Empiezo con los comandos:
-- fastboot devices = ok
-- fastboot boot recovery_amon_ra.1.7.0.img = Ok. Me monta el recovery digamos como en memoria.
- abd shell mount -a (me salta con un error, pero en el video veo que se obvia, sigo adelante).
- adb shell flash_image recovery /sdcard/recover............ . img
Se queda como 3 segundos esperando la shell de msdos, y después el prompt y nada. Como si lo hubiera conseguido. No me aparece nada de flashing ni nada. Asi que supongo que lo hace bien.
--Reinicio => Nada, el mismo recovery de siempre.
Tengo la 1.6 oficial. Es una magic de vodafone.
¿Qué hago mal?
También he intentado hacer lo que aparece en la web de amon_ra:
via fastboot : - Requires engineerings SPL!
Code:
Copy recovery-RA-sapphire-v1.7.0G.img to a location where fastboot can find it.
Boot your G1 into fastboot mode (boot while holding BACK)
Connect your G1 via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
via adb : - Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
- Do NOT follow these steps from a terminal application on the phone, make sure that you've booted into a custom recovery first!!!
Code:
Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your G1 via usb to your pc/mac/...
adb shell
#mount -a (this can give back an error if you don't have an ext partition, don't worry about it and just proceed)
#flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img