os cuento como va la cosa, he conseguido que con el tuto que me habeis pasado, el ordenador lo reconozca, pero llego al paso de utilizar el Msm8974DownloadTool.exe y le doy a start pero no se mueve nada ni hace nada e un rato. Tiene que hacer algo?, puede que este haciendo algo mal?
muchas gracias un saludo
Si lo haces desde windows7 ejecuta el Msm8974DownloadTool.exe como administrador, le das al boton enum y comprueba que en alguna de las lineas aparece tu opo (el texto es diferente al resto de las lineas y eso indica que realmente lo ha detectado) y luego le das a start, en ese momento empezará a copiar los ficheros que ha detectato corruptos en tu opo (saldra una barra de progeso) y cuando acabe el texto de la linea donde está detectado tu opo se pondrá en verde, si se queda en rojo hay algo que no está bien, en mi caso fue porque no habia ejecutado el programita como administrador.
Te adjunto un tuto (en inglés) en el que has de prestar mucha atención a como instalar bien el driver para win7.:
I've used a Windows 7 32bit.
------ WARNING 64-bit systems must have test certificate installed first. See the "read me" in the drivers pack
What we need is the "Color.zip" posted from @sukanta.hazra (thank you so much) in first post of this tread and follow his instructions apart for the "driver installation" that didn't work for me.
Anyway in 32bit system I've plugged my phone to computer and the device manager show phone as"unknow usb device". That's mean that you aren't in fastboot mode then press Vol up + power for about 10 seconds till the vibration.
Now you'll have "QHSUSB_BULK" showed in device manager. At this point, use the drivers posted
[email protected] (thank you so much) decompressing it.
In Device Manager you have to right click on "qhsusb_bulk" and select "update driver software" and chose "Browse my computer for driver software" then navigate to path "/Qualcom_2012/fre/Windows7" and click ok.
Driver going to be installed now. Once you installed the drivers and the device are recognized, you'll have to launch "Msm8974DownloadTool" by right click on it and select "run as Administrator".
You'll see your device recognized on some com port. Now click "enum" the re-recognize com port then press "start". The installation process start by installing some software you see by green bar progress. Wait till all process terminated. When finished you'll see the line of "com" referred to your device has becomed green. All pain is finished. Unplug the device, press power button for about 10 seconds and your device restart with "red oneplus logo". Wait because the first boot take time.
Now you are on ColorOS working phone and can flash what you prefer via "adb".
Once you're on ColorOS and want to go to Cyanogenmod 11S, you have a few options. The easiest way if to use a toolkit from http://forum.xda-developers.com/onep...9-gui-t2807418, or you can download an image manually from: http://forum.xda-developers.com/onep...stock-t2826541 and run the following commands in fastboot mode:
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin