husen4u
29/12/13, 08:45:01
HYD52ROM
P6-U06
◢ROM Features ◣
Build From Latest JB For P6 B118CN
Zipaligned
insecure kernel - linux 3.0.8 ! (Thanks Surdu Petru)
Busybox Support
init.d Support
Pure Performance (Thanks to Jeeko)
Pure Graphics (Thanks To Jeeko)
Pure Audio (Thanks To Jeeko)
Debloated
Build.prop Tweaks
Custom Bootanimation
◢ Features ◣
THANKS A LOT TO JEEKO FOR SUCH A NICE POWER BOOSTER
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and discover its power! :P
◢ Audio studio-quality on your phone™ ◣
◢ Features ◣
- Clear sound
- No more track noise
- Beats™ Audio by Dr.Dre
- Audio Pure™ Control not to damage your hearing
- Also compatible with the headphones that don't support audio render of 60kHz
- Where possible, arrange for the conversion of the songs (in background) below 256 kbps to 320kbps
- During playback of songs / sounds make a soft frequency scaling to reduce noise and highlight the track
- It offers more powerful and closed bass
- Efficient even with stock headphones
- Improves a lot the audio call
- Enhance the speakers for playing music without headphones in high quality
I can not tell you everything What are you waiting for? Try it and find out what's missing features!!
◢ Features ◣
- Enable GPU rendernig
- Enable dithering but did not affect consumption!!
- Use the GPU for the management of the touch
- Improve video HW render
- It allows you to play ported ARMV7 games without lags problems
- Increase scores on the AnTuTu graphic rank
- In MDPI devices improves the density pixels and brightness
- Eliminates lag system with the generator of video entropy
- Liquify the UI
Lots Of Build.prop
Feel The Power.
◢ Installation Instruction ◣
1. You Must Be On B118CN (https://mega.co.nz/#!1EN2WQQb!BzgV6Cw-uw3NZF97L_ALEyuyyZ51f5-ennpVLClYP00)
2. Install TWRP Recovery (http://www.htcmania.com/showthread.php?t=748218)
3. Wipe Factory Reset
4. Install HYD52ROM-P6-V1.zip (https://mega.co.nz/#!3cpDTS5R!JFw7XjWADliu87p4LX8C21cbsVl5MlAjkBuZvxh GXGI)
5. Install Gapps (https://mega.co.nz/#!fdgBBJLZ!PgrrcCQuxi9IZvrtaUvqiFlrAq5XqP0jG7YwRw6 ZbI4)
6. Install Enable USB (https://mega.co.nz/#!ecpzRQqZ!Wdfxz1zgPgFeXf0fHY-eK2Xq7l4t7b2DelNznBjROJA)
7. Wipe Cache Dalvik
8.Reboot
Download : HYD52ROM (https://mega.co.nz/#!3cpDTS5R!JFw7XjWADliu87p4LX8C21cbsVl5MlAjkBuZvxh GXGI)
◢ Screenshots ◣
http://imageshack.com/a/img856/1630/owi4.png
http://imageshack.com/a/img543/7714/77ri.png
http://imageshack.com/a/img191/8619/j2zy.png
Bug :
You Tell Me
Credits :
Surdu_Petru
Jeeko
XDA
Huawei
Special Thanks To Surde_Petru For Help.
KEEP THIS PROJECT ALIVE (https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=78HD7V5AUTSAY)
P6-U06
◢ROM Features ◣
Build From Latest JB For P6 B118CN
Zipaligned
insecure kernel - linux 3.0.8 ! (Thanks Surdu Petru)
Busybox Support
init.d Support
Pure Performance (Thanks to Jeeko)
Pure Graphics (Thanks To Jeeko)
Pure Audio (Thanks To Jeeko)
Debloated
Build.prop Tweaks
Custom Bootanimation
◢ Features ◣
THANKS A LOT TO JEEKO FOR SUCH A NICE POWER BOOSTER
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and discover its power! :P
◢ Audio studio-quality on your phone™ ◣
◢ Features ◣
- Clear sound
- No more track noise
- Beats™ Audio by Dr.Dre
- Audio Pure™ Control not to damage your hearing
- Also compatible with the headphones that don't support audio render of 60kHz
- Where possible, arrange for the conversion of the songs (in background) below 256 kbps to 320kbps
- During playback of songs / sounds make a soft frequency scaling to reduce noise and highlight the track
- It offers more powerful and closed bass
- Efficient even with stock headphones
- Improves a lot the audio call
- Enhance the speakers for playing music without headphones in high quality
I can not tell you everything What are you waiting for? Try it and find out what's missing features!!
◢ Features ◣
- Enable GPU rendernig
- Enable dithering but did not affect consumption!!
- Use the GPU for the management of the touch
- Improve video HW render
- It allows you to play ported ARMV7 games without lags problems
- Increase scores on the AnTuTu graphic rank
- In MDPI devices improves the density pixels and brightness
- Eliminates lag system with the generator of video entropy
- Liquify the UI
Lots Of Build.prop
Feel The Power.
◢ Installation Instruction ◣
1. You Must Be On B118CN (https://mega.co.nz/#!1EN2WQQb!BzgV6Cw-uw3NZF97L_ALEyuyyZ51f5-ennpVLClYP00)
2. Install TWRP Recovery (http://www.htcmania.com/showthread.php?t=748218)
3. Wipe Factory Reset
4. Install HYD52ROM-P6-V1.zip (https://mega.co.nz/#!3cpDTS5R!JFw7XjWADliu87p4LX8C21cbsVl5MlAjkBuZvxh GXGI)
5. Install Gapps (https://mega.co.nz/#!fdgBBJLZ!PgrrcCQuxi9IZvrtaUvqiFlrAq5XqP0jG7YwRw6 ZbI4)
6. Install Enable USB (https://mega.co.nz/#!ecpzRQqZ!Wdfxz1zgPgFeXf0fHY-eK2Xq7l4t7b2DelNznBjROJA)
7. Wipe Cache Dalvik
8.Reboot
Download : HYD52ROM (https://mega.co.nz/#!3cpDTS5R!JFw7XjWADliu87p4LX8C21cbsVl5MlAjkBuZvxh GXGI)
◢ Screenshots ◣
http://imageshack.com/a/img856/1630/owi4.png
http://imageshack.com/a/img543/7714/77ri.png
http://imageshack.com/a/img191/8619/j2zy.png
Bug :
You Tell Me
Credits :
Surdu_Petru
Jeeko
XDA
Huawei
Special Thanks To Surde_Petru For Help.
KEEP THIS PROJECT ALIVE (https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=78HD7V5AUTSAY)