Ver la Versión Completa : KERNEL [n4] [6.0][3.4.0][aosp/cm] [10/26] [m2] - ak
MementoMoriM
08/10/13, 01:46:34
.....
MementoMoriM
09/10/13, 14:54:28
....
MementoMoriM
10/10/13, 22:54:58
...
MementoMoriM
12/10/13, 12:50:19
...
MementoMoriM
15/10/13, 02:25:57
Editado.
MementoMoriM
15/10/13, 02:26:33
Cha
MementoMoriM
17/10/13, 02:44:57
Bac
Actualizacion del kernel v035
AK.035.zip (http://forum.xda-developers.com/devdb/project/dl/?id=1181)
Changelog
+ 2 patches for interactive from 3.10 android
+ some patches for lib routine
+ a lot of fixes here and here
+ low cpu freqs steps: +162 Mhz, +270 Mhz, +378 Mhz
+ auto hotplug tuned for battery life
+ rwsem patches
+ binder patches
Actualizacion de este kernel
AK.041.xCrossed (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Actualizacion de este kernel
AK.051.xCrossed (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Changelog:
+ mako touch boost for all governors
+ some patches for camera
+ some patches for scheduler
+ some patches gpu
+ tuning for all governors
+ disabled vdd core boost = -25mv by default for all chips
+ ecc ecc ecc
MementoMoriM
21/10/13, 12:04:29
Yo creo que este es el tema menos seguido del subforo jajaj :sly:
MementoMoriM
22/10/13, 10:31:52
Ak055 y Ak056Jw http://forum.xda-developers.com/devdb/project/?id=1023#downloads
Actualizacion de este kernel
Changelog http://forum.xda-developers.com/showpost.php?p=46249033&postcount=3
[CM10.2] KERNEL
ak kernel download: AK.072.xCrossed (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
[CAF MIX JWR] KERNEL
ak kernel download: AK.072.jwr.xCrossed (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Actualizacion de este kernel
[CM10.2 - CAF] KERNELS
ak kernel download: AK.078.CM10 (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
[JWR - CAF] KERNELS
ak kernel download: AK.078.JW (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.078
https://github.com/anarkia1976/AK-xCrossing/compare/ak-cm10.2-022-prima...ak-cm10.2-023-prima
Kernel para Kitkat para testeo
ak kernel download: AK.100.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
NB:
- tested for now only with Slimkat rom
+ caf source
+ all features of ak cm10.2
+ some fixes
+ wheatley default governor with touchboost
+ ecc ecc
Kernel para Kitkat para testeo
ak kernel download: AK.100.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
NB:
- tested for now only with Slimkat rom
+ caf source
+ all features of ak cm10.2
+ some fixes
+ wheatley default governor with touchboost
+ ecc ecc
Yamcha, gracias.
Fantástico en la versión Port
Memento, gracias también.
Perdón, no dejaba Tapa editar, sólo moderar
pascual s
03/11/13, 01:18:40
probando sobre el port N5
lo primero que me ha pasado es que ha dejado de funcionar el administrador de dispositivos.
A pesar de ello lo dejare a ver como va de consumos y tal
lautarito
03/11/13, 02:04:22
Hola captura,gracias
Saludos
tornado76
03/11/13, 22:47:50
new kernels are UP [CM10.2 - CAF] KERNELS
ak kernel download: AK.103.CM10 (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
[JWR - CAF] KERNELS
ak kernel download: AK.103.JW (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
[KITKAT - CAF] KERNELS
ak kernel download: AK.103.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
changelog:
+ merged with cm10.2 branch - only cm10.2 and KK - flicker is gone? for me yes.
+ a lof of fixes from common 3.4 and 3.10 branch
+ added smartmax governor
+ ecc ecc ecc ...
tornado76
04/11/13, 22:58:54
http://media.xda-developers.com//images/icons/advanced/plug.png new kernel
[KITKAT - CAF] KERNELS
ak kernel download: AK.106.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link
(https://github.com/anarkia1976/AK-xCrossing/branches)
changelog:
+ ondemand default
+ 256 readahead
+ 3.4.68 linux
+ fixed administrator settings sticking -> a fresh install of the rom is recommended
+ remove media tuners
+ add support for KALLSYMS and MODULES
+ net patches
+ crypto patches
+ ecc.
tornado76
04/11/13, 23:03:12
Un usuario en el hilo de anarkia1976 a sacado esto basado en el 103
AK-Piasek.103.JW V1 (http://forum.xda-developers.com/showpost.php?p=47094294&postcount=688) = Ak.103JW + Franco Gamma Control + Double Tap 2 Wake - s2w/s2s
AK-Piasek.103.JW v2.zip (http://forum.xda-developers.com/attachment.php?attachmentid=2370771&d=1383575993) = Ak.103JW + Franco Gamma Control with s2w/s2s
Nueva actualizacion Kernel KitKat
Edit
turydios
05/11/13, 09:59:24
Voy poner este kernel, gracias por el aporte
tornado76
05/11/13, 10:03:48
Nueva actualizacion Kernel KitKat
ak kernel download: AK.106.KK (http://forum.xda-developers.com/devdb/project/dl/?id=1580&task=get)
changelog:
+ ondemand default
+ 256 readahead
+ 3.4.68 linux
+ fixed administrator settings sticking -> a fresh install of the rom is recommended
+ remove media tuners
+ add support for KALLSYMS and MODULES
+ net patches
+ crypto patches
+ ecc.
http://www.htcmania.com/showpost.php?p=10969581&postcount=21 X-D ta repe X-D
http://www.htcmania.com/showpost.php?p=10969581&postcount=21 X-D ta repe X-D
Upps :facepalm: lo borro
Nuevo kernel Experimental para KK
[KITKAT - CAF]
EXPERIMENTAL KERNEL
ak kernel download: AK.111.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
changelog:
+ new prima 191
+ new intellidemand 4.4
+ new faux early suspend drivers
+ screen on off fix delay
+ gpu trustzone boost interface
+ selinux boost
+ ext4 fixes
https://github.com/anarkia1976/AK-xC...2-028-prima-kk (https://github.com/anarkia1976/AK-xCrossing/commits/ak-cm10.2-028-prima-kk)
ironjon
06/11/13, 23:14:13
http://img.tapatalk.com/d/13/11/07/ygymadu2.jpg
http://img.tapatalk.com/d/13/11/07/myrugy4y.jpg
:)
Ironjon, compañero, se le saluda afectuosamente.
Una cosa, en la versión anterior lo dejé como tu en 270 MHz, pero en ésta, prueba a dejarlo como lo llevas, intellidemant pero baja a 162 MHz para probar, me va francamente bien.
ironjon
06/11/13, 23:36:14
Ironjon, compañero, se le saluda afectuosamente.
Una cosa, en la versión anterior lo dejé como tu en 270 MHz, pero en ésta, prueba a dejarlo como lo llevas, intellidemant pero baja a 162 MHz para probar, me va francamente bien.
OK pero antes vuelvo a Dalvik, andaba probando ART y he sufrido un ataque de FCs
OK pero antes vuelvo a Dalvik, andaba probando ART y he sufrido un ataque de FCs
Si llevas Faux control, cambialo por trickster mod, me hizo faux forzosos en varias ocasiones, cambié a trickster y perfecto.
ironjon
06/11/13, 23:59:08
Sus deseos son ordenes señor marera
http://img.tapatalk.com/d/13/11/07/4ahydyne.jpg
:risitas:
ironjon
07/11/13, 07:36:16
Me encanta el olor a kernel recién hecho por la mañanas
http://img.tapatalk.com/d/13/11/07/y5equdy4.jpg
Habrá que probarlo entonces, que todavía no he puesto ningún kernel KK salvo el que viene por defecto en las Roms
Me encanta el olor a kernel recién hecho por la mañanas
http://img.tapatalk.com/d/13/11/07/y5equdy4.jpg
Ouyeeeea ! Que me ha gustado eso.
Por cierto, le doy al link que has posteado y no me descarga, entra en bucle o algo raro pasa.
El link es lo de azul, no ?
turydios
07/11/13, 14:47:46
Ouyeeeea ! Que me ha gustado eso.
Por cierto, le doy al link que has posteado y no me descarga, entra en bucle o algo raro pasa.
El link es lo de azul, no ?
Aqui tienes : http://forum.xda-developers.com/devdb/project/?id=1023#downloads
Para una rom Purity cual se a de poner? por probar haber, calibrais la batería despues de cada cambio de kernel?
Para una rom Purity cual se a de poner? por probar haber, calibrais la batería despues de cada cambio de kernel?
Con la purity mete este kernel , haz un backup antes, los 2 wipes , y lo de calibrar bateria no hace falta
[JWR - CAF]
STABLE KERNEL
ak kernel download: AK.103.JW (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
De momento con Franco 193 voy sacando esto http://img.tapatalk.com/d/13/11/07/2e4unuqu.jpghttp://img.tapatalk.com/d/13/11/07/avedu2ys.jpg
No va nada mal
Que ofrece este kernel de mas que no tenga el Franco? lo dejo como viene o algún voltaje recomendado?
Funciona mal, hace cosas raras la pantalla, he puesto el que an colgado arriba, alguna solución?
ironjon
07/11/13, 19:35:18
Realmente bueno, sin reincios ni cosas raras y muy bajo de frecuencias
http://img.tapatalk.com/d/13/11/08/enu7u7ad.jpg
Me hago polvo con los AK kernel, espero que siga su trabajo cuando salga KK oficial voy a meter el 112, con el 106 llego casi a las 6 horas de pantalla.
Me hago polvo con los AK kernel, espero que siga su trabajo cuando salga KK oficial voy a meter el 112, con el 106 llego casi a las 6 horas de pantalla.
Con que rom? Puedes poner alguna captura de como lo tienes configurado?:ok:
anarkia1976;47243249][KITKAT - CAF]
STABLE KERNEL
ak kernel download: AK.114.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
[CM11 - CAF]
STABLE KERNEL
ak kernel download: AK.114.CM11 (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Github Kernel: Link (https://github.com/anarkia1976/AK-xCrossing/branches)
changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.114.CM11
anarkia1976 - Revert "msm: kgsl: Add touchboost to trustzone governor"
anarkia1976 - cyanogen_mako_defconfig: enable RCU_BOOST
anarkia1976 - cyanogen_mako_defconfig: disable IP_PNP
anarkia1976 - cyanogen_mako_defconfig: enable JUMP_LABEL
anarkia1976 - cyanogen_mako_defconfig: enable EXT4_USE_FOR_EXT23
anarkia1976 - cyanogen_mako_defconfig: enable HEAP RANDOMIZATIONS
anarkia1976 - Revert "msm: acpuclock: removed frequencies for a small table"
anarkia1976 - Revert "msm: acpuclock: switch off 1620Mhz but on 1728Mhz"
anarkia1976 - Revert "msm: pm: fix for race condition of starting cpu1 when cpu0 in PC"
anarkia1976 - Revert "cyanogen_mako_defconfig: enable -O3"
anarkia1976 - cpufreq: cleaning all unused code for intellidemand and cpufreq drivers
anarkia1976 - cpufreq: intellidemand: add new power_suspend pm driver
anarkia1976 - powersuspend: change workqueue structure for coexist with old logic
anarkia1976 - cyanogen_mako_defconfig: enable POWERSUSPEND
Paul Reioux - powersuspend: new pm kernel driver for android w/o early_suspend
anarkia1976 - cyanogen_mako_defconfig: set default INTELLIDEMAND
anarkia1976 - cpufreq: intellidemand: update two_phase_freq to 1242Mhz
anarkia1976 - cpufreq: intellidemand: update to version 4.4 Nexus 5
Este 114kk sirve para la rom jwr? Llevo el 103 jwr
ironjon
08/11/13, 07:39:29
Ya hay versión para CM11 :risitas:
La verdad que es una delicia este kernel, va muy bien y fino, o que no se que significa la versión kk, que es beta?
ironjon
08/11/13, 09:11:02
La verdad que es una delicia este kernel, va muy bien y fino, o que no se que significa la versión kk, que es beta?
La versión KK es para roms KitKat que NO sean Cyanogen o basadas en Cyanogen (las de Cyanogen son evidentemente las que pone CM11)
Osease a día de hoy las AOSP o los port del N5
La versión KK es para roms KitKat que NO sean Cyanogen o basadas en Cyanogen (las de Cyanogen son evidentemente las que pone CM11)
Osease a día de hoy las AOSP o los port del N5
Entonces el último de jwr es el 103 si no me equivoco
ironjon
08/11/13, 09:20:03
Entonces el último de jwr es el 103 si no me equivoco
Si correcto, el ultimo para JWR es el 103
slipknot30
08/11/13, 09:26:52
Que tal va este kernel? , este desarrollador era la poll* en el SGS.
Que tal va este kernel? , este desarrollador era la poll* en el SGS.
Muy bien la verdad, o llevo en la purity y es muy estable y rápido
tornado76
08/11/13, 22:38:07
Estoy con el AK. 114.CM11 en la BeanStalk desde hoy y es impresionante :ok:
Las frecuencias nada de cosas raras, muy fluido y en temas de consumos de bateria excelente y de todo en general :D
Un saludo.!!!
Estoy con el AK. 114.CM11 en la BeanStalk desde hoy y es impresionante :ok:
Las frecuencias nada de cosas raras, muy fluido y en temas de consumos de bateria excelente y de todo en general :D
Un saludo.!!!
Ese vale para ROM 4.4?
tornado76
08/11/13, 22:44:45
Ese vale para ROM 4.4?
Para la 4.4 el kernel KK
ak kernel download: AK.114.KK (http://forum.xda-developers.com/devdb/project/?id=1023#downloads)
Ok,llevo el 106 en la rom 4.4 pórtico
tornado76
08/11/13, 22:47:59
Ok,llevo el 106 en la rom 4.4 pórtico
Pues en ese caso el que te dije, que es el mismo que llevas pero la version mas reciente..
Creo han sacado ya el 114 puede ser?
ironjon
08/11/13, 22:56:59
Creo han sacado ya el 114 puede ser?
Si correcto y va igual de bien
tornado76
08/11/13, 23:02:33
Si correcto y va igual de bien
El 106 no lo probe, pero el 114 va de coj..
El 106 no lo probe, pero el 114 va de coj..
Mañana lo pongo
MementoMoriM
09/11/13, 14:34:06
[KITKAT - CAF]
* ak kernel download: AK.118.KK http://forum.xda-developers.com/devdb/project/dl/?id=1688
* Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
[CM11 - CAF]
* ak kernel download: AK.118.CM11 http://forum.xda-developers.com/devdb/project/dl/?id=1689
* Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
changeog:
+ revert s2w
+ add touchwake
+ ecc ecc ecc
+ see changelog on git
Thanks and rate.
ironjon
09/11/13, 14:39:04
Este dev no tiene tiempo para aburrirse, no para
No aconsejo instalarlo, hace cosas raras la pantalla
Furiome
09/11/13, 14:45:43
No ha salido la 4.4 oficialmente y ya tenemos kernels bastantes interesantes, incluso el Touch Control funcionando! Estos devs son unos cracks X-D
slipknot30
09/11/13, 15:16:24
Que ha pasado con los 4.3 ? Links caidos
Este dev no tiene tiempo para aburrirse, no para
No aconsejo instalarlo, hace cosas raras la pantalla
A que te refieres con cosas raras? Yo no tengo ningún problema..
valeriog
09/11/13, 15:33:02
yo he tenido problemas con el 114 sobre todo en reproduccion de videos y hoy me falllaba el wifi, ahora pruebo este 118 sino volverè al 112 que me iba de perlas
ironjon
09/11/13, 15:53:25
A que te refieres con cosas raras? Yo no tengo ningún problema..
La transición entre pantallas va a pedales, habria que deshabilitar la superposición de HW en opciones de desarrollo para que fuera bien
valeriog
09/11/13, 16:31:56
La transición entre pantallas va a pedales, habria que deshabilitar la superposición de HW en opciones de desarrollo para que fuera bien
acabo de decargar la 118 y ya tenemos la 119, por dios que eficiencia:platano::platano:
valeriog
09/11/13, 17:00:39
nada , me sigue dando errores en la wifi, conecta y se desconecta pero el icono ni se immuta
MementoMoriM
10/11/13, 03:23:52
[KITKAT - CAF]
ak kernel download: AK.119.KK http://forum.xda-developers.com/devdb/project/dl/?id=1692
Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
[CM11 - CAF]
ak kernel download: AK.119.CM11http://forum.xda-developers.com/devdb/project/dl/?id=1692
Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
changelog:
+ fix tearing KK version
+ intelli plug from faux n5 + eco mode
+ ecc
slipknot30
10/11/13, 03:34:48
[KITKAT - CAF]
ak kernel download: AK.119.KK http://forum.xda-developers.com/devdb/project/dl/?id=1692
Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
[CM11 - CAF]
ak kernel download: AK.119.CM11http://forum.xda-developers.com/devdb/project/dl/?id=1692
Github Kernel: Link https://github.com/anarkia1976/AK-xCrossing/branches
changelog:
+ fix tearing KK version
+ intelli plug from faux n5 + eco mode
+ ecc
Son los 2 KitKat?
MementoMoriM
10/11/13, 03:42:48
Son los 2 KitKat?
Sí, pero la primera para versiones AOSP y la segunda para versiones CM .
MementoMoriM
10/11/13, 23:45:38
Estaría guay los que lo tenéis que pongáis impresiones y alguna captura de pantalla :rolleyes:
Saludos y espero no mosquear con mi comentario compas !
fran_ele
11/11/13, 01:19:21
Estaría guay los que lo tenéis que pongáis impresiones y alguna captura de pantalla :rolleyes:
Saludos y espero no mosquear con mi comentario compas !
Rom crdroid build 2 y ak119cm, 100mv de uv y CPU online min 1, gpu@487mhz
Los consumos son de verdad aunque me cuesta creerlos, a ver si puedo hacer un segundo ciclo al 100%
alguien que comparta el AK KK porque el foro de XDA esta offline
gracias y saludos
edito, ya esta online :ok:
fran_ele
12/11/13, 17:41:34
Bueno por fin he completado un ciclo al 100% :D
victormondaza
12/11/13, 18:30:42
Para los que lleváis más tiempo con este kernel. ¿ que configuración le poneis para conseguir un buen consumo, regulador, frecuencia?
slipknot30
12/11/13, 18:52:24
Bueno por fin he completado un ciclo al 100% :D
Un consumo cojonudo
fran_ele
12/11/13, 19:04:18
Para los que lleváis más tiempo con este kernel. ¿ que configuración le poneis para conseguir un buen consumo, regulador, frecuencia?
Haz undervolt si puedes, yo he hecho -100mV con chip faster pero me aguanta -150mv
En opciones de conexion en caliente del trickster pon max cpu online a 1 para usar solo un nucleo con cargas bajas, por defecto viene en 2
GPU a 487mhz y cpu 384mhz a 1.5ghz
Y a volar...
PD:todo lo demas por defecto, Intelidemand/Deadline256
slipknot30
12/11/13, 19:16:24
Haz undervolt si puedes, yo he hecho -100mV con chip faster pero me aguanta -150mv
En opciones de conexion en caliente del trickster pon max cpu online a 1 para usar solo un nucleo con cargas bajas, por defecto viene en 2
GPU a 487mhz y cpu 384mhz a 1.5ghz
Y a volar...
PD:todo lo demas por defecto, Intelidemand/Deadline256
A mi me gusta más kernel tuner . viene mucho mas completo
fran_ele
12/11/13, 19:20:59
A mi me gusta más kernel tuner . viene mucho mas completo
Como alternativa al trickster uso android tuner que tiene mil opciones, probare el que dices a ver que tal va
Buenas, se puede utilizar este kernel con esta rom
Gracias
http://img.tapatalk.com/d/13/11/13/u9erune4.jpg
fran_ele
12/11/13, 19:39:12
Buenas, se puede utilizar este kernel con esta rom
Gracias
http://img.tapatalk.com/d/13/11/13/u9erune4.jpg
No, lo mas parecido que puedes meter es el AK.103.JW
ironjon
13/11/13, 09:33:39
Que no pare
http://forum.xda-developers.com/showpost.php?p=47407557&postcount=1315
MementoMoriM
13/11/13, 09:58:20
Pongo enlaces así para quien use tapatalk :thumbup:
[KITKAT - CAF]
ak kernel download: AK.126.KK http://forum.xda-developers.com/devdb/project/dl/?id=1772
[CM11 - CAF]
ak kernel download: AK.126.CM11 http://forum.xda-developers.com/devdb/project/dl/?id=1771
changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc
I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/show...postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks buttonPongo enlaces para quien utilice Tapatalk.
Grande anarkia, si podéis darle las gracias en xda no cuesta nada y es un momento, se lo merece por el gran trabajo que hace.
slipknot30
13/11/13, 12:51:06
Pongo enlaces así para quien use tapatalk :thumbup:
[KITKAT - CAF]
ak kernel download: AK.126.KK http://forum.xda-developers.com/devdb/project/dl/?id=1772
[CM11 - CAF]
ak kernel download: AK.126.CM11 http://forum.xda-developers.com/devdb/project/dl/?id=1771
changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc
I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/show...postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks buttonPongo enlaces para quien utilice Tapatalk.
Gracias @Memento yo solo uso el tapa , se jodii mi PC. Este kernel es para 4.4 o 4.3.x
EDITO: por lo que veo si es para 4.4
ggvelez
16/11/13, 18:27:15
Pues yo acabo de instalar la rom stock 4.4 y al meter este kernel (AK.126.KK) se me queda bloqueado en el arranque...
gallegomanuel
16/11/13, 22:28:17
Pues yo acabo de instalar la rom stock 4.4 y al meter este kernel (AK.126.KK) se me queda bloqueado en el arranque...
Querria saber si se puede meter este kernel en KRT16O? que viene siendo la 4.4 stock para nexus 4
MementoMoriM
17/11/13, 20:47:33
New test kernel is up v.132, no official for now.
Dowload Link:
ak.hiddenbytes.org
NB:
This kernel is only for KRT160, it work on Factoty Images and Aosp Modded Roms.
Git:
https://github.com/anarkia1976/AK-xC...6-prima-kk-krt (https://github.com/anarkia1976/AK-xCrossing/commits/ak-cm10.2-036-prima-kk-krt)
Changelog:
+ set max screen off 1134Mhz
+ intelli_plug merges with N5 faux Kernel
+ added topology patches
+ compile with Neon fixes everytime
+ inizialize kernel space variables
+ cleaning interactive governor
+ ecc ecc
Diff Changelog:
Code:
Project name: AK KERNEL anarkia1976 - Kernel Version: AK.132.KK.KRT anarkia1976 - Revert "Revert "Revert "Revert "msm: kgsl: Add a command dispatcher to manage the ringbuffer"""" anarkia1976 - Revert "msm: kgsl: Fix error returns in adreno_ringbuffer_issueibcmds" anarkia1976 - Revert "msm: kgsl: use the same logic in adreno_idle and adreno_isidle" anarkia1976 - Revert "msm: kgsl: Use msecs_to_jiffies for ADRENO_IDLE_TIMEOUT" anarkia1976 - Kernel Version: AK.131.KK.KRT Deepak Verma - msm: vidc: Initialize kernel space stack variables anarkia1976 - cyanogen_mako_defconfig: set max off to 1134Mhz ktoonsez - Add internal bool for snd_pcm struct Russell King - ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM anarkia1976 - Kernel Version: AK.128.KK Joe Perches - jiffies conversions: Use compile time constants when possible Paul Reioux - intelli_plug: use a context safe function call instead Paul Reioux - Revert "intelliplug: add mutext protection around input work" ramgear - pm8921-charger: Remove stupid message anarkia1976 - cyanogen_mako_defconfig: enable SCALE_INVARIANT_CPU_CAPACITY Paul Reioux - ARM: (Experimental) Provide Estimated CPU Capacity measure Lorenzo Pieralisi - ARM: kernel: update topology to use new MPIDR macros Lorenzo Pieralisi - ARM: kernel: enhance MPIDR macro definitions Venkatraman Sathiyamoorthy - ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology Vincent Guittot - ARM: 7463/1: topology: Update cpu_power according to DT information Vincent Guittot - ARM: 7462/1: topology: factorize the update of sibling masks Vincent Guittot - ARM: 7461/1: topology: Add arch_scale_freq_power function anarkia1976 - vfp: makefile: compile with neon optimization anarkia1976 - cpufreq: interactive: remove unused code for boostpulse chown
New test kernel is up v.132, no official for now.
Dowload Link:
ak.hiddenbytes.org
NB:
This kernel is only for KRT160, it work on Factoty Images and Aosp Modded Roms.
Git:
https://github.com/anarkia1976/AK-xC...6-prima-kk-krt (https://github.com/anarkia1976/AK-xCrossing/commits/ak-cm10.2-036-prima-kk-krt)
Changelog:
+ set max screen off 1134Mhz
+ intelli_plug merges with N5 faux Kernel
+ added topology patches
+ compile with Neon fixes everytime
+ inizialize kernel space variables
+ cleaning interactive governor
+ ecc ecc
Diff Changelog:
Code:
Project name: AK KERNEL anarkia1976 - Kernel Version: AK.132.KK.KRT anarkia1976 - Revert "Revert "Revert "Revert "msm: kgsl: Add a command dispatcher to manage the ringbuffer"""" anarkia1976 - Revert "msm: kgsl: Fix error returns in adreno_ringbuffer_issueibcmds" anarkia1976 - Revert "msm: kgsl: use the same logic in adreno_idle and adreno_isidle" anarkia1976 - Revert "msm: kgsl: Use msecs_to_jiffies for ADRENO_IDLE_TIMEOUT" anarkia1976 - Kernel Version: AK.131.KK.KRT Deepak Verma - msm: vidc: Initialize kernel space stack variables anarkia1976 - cyanogen_mako_defconfig: set max off to 1134Mhz ktoonsez - Add internal bool for snd_pcm struct Russell King - ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM anarkia1976 - Kernel Version: AK.128.KK Joe Perches - jiffies conversions: Use compile time constants when possible Paul Reioux - intelli_plug: use a context safe function call instead Paul Reioux - Revert "intelliplug: add mutext protection around input work" ramgear - pm8921-charger: Remove stupid message anarkia1976 - cyanogen_mako_defconfig: enable SCALE_INVARIANT_CPU_CAPACITY Paul Reioux - ARM: (Experimental) Provide Estimated CPU Capacity measure Lorenzo Pieralisi - ARM: kernel: update topology to use new MPIDR macros Lorenzo Pieralisi - ARM: kernel: enhance MPIDR macro definitions Venkatraman Sathiyamoorthy - ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology Vincent Guittot - ARM: 7463/1: topology: Update cpu_power according to DT information Vincent Guittot - ARM: 7462/1: topology: factorize the update of sibling masks Vincent Guittot - ARM: 7461/1: topology: Add arch_scale_freq_power function anarkia1976 - vfp: makefile: compile with neon optimization anarkia1976 - cpufreq: interactive: remove unused code for boostpulse chown
Este sirve para la Kinder o revo r2?
MementoMoriM
17/11/13, 21:25:15
Este sirve para la Kinder o revo r2?
Pregunta mejor en el hilo de la ROM si vale este test , aunque yo diría que si :D
cristianch410
17/11/13, 21:27:29
Este sirve para la Kinder o revo r2?
Si no me equivoco es una version test para las rom 4.4 oficial, que hasta que no se libere el kernel 4.4 no habra uno custom bueno
Yo de momento esperare ya que estan testeando todavia y el stock funciona muy bien.. No me canso de decirlo Anarkia crack!
alexret
17/11/13, 21:51:20
Probemos esa versión test.
MementoMoriM
17/11/13, 22:20:14
Nuevo enlace para descarga del kernel http://ak.hiddenbytes.org/
adrianedu
17/11/13, 22:33:12
Yo lo llevo en la Kinder v2 y va de miedo. :grin:
adRii_er
18/11/13, 00:25:17
Primera vez que pongo uno de estos y... Flipante!! Con kinder V1 vuela! A ver que tal los consumos
sergiomontcada
18/11/13, 16:25:12
que frecuencia, planificador y gobernador me recomendáis?
MementoMoriM
20/11/13, 16:08:38
http://ak.hiddenbytes.org/
CM11 Changelog:
+ based on CM11 branch
+ fully merged with cm11 branch
+ ecc ecc
KK Changelog:
+ rebase from AOSP source
+ gamma
+ sound
+ s2w
+ halfbreed color
+ thermal enhanced
+ deadline default
+ deadline ssd tuning
+ cfq tuning
+ linaro 4.8.2
+ ecc ecc
Thanks and Rate.
valeriog
20/11/13, 16:14:38
http://ak.hiddenbytes.org/
[KITKAT - CAF]
* ak kernel download: AK.204.KK
* Github Kernel: Link
[CM11 - CAF]
* ak kernel download: AK.133.CM11
* Github Kernel: Link
CM11 Changelog:
+ based on CM11 branch
+ fully merged with cm11 branch
+ ecc ecc
KK Changelog:
+ rebase from AOSP source
+ gamma
+ sound
+ s2w
+ halfbreed color
+ thermal enhanced
+ deadline default
+ deadline ssd tuning
+ cfq tuning
+ linaro 4.8.2
+ ecc ecc
Thanks and Rate.
he probado el 204 KK y aparte que no tiene overclocking no me funciona el wifi, vuelvo al 132
ewardofr
20/11/13, 16:17:15
he probado el 204 KK y aparte que no tiene overclocking no me funciona el wifi, vuelvo al 132
¿Instalaste el deprimator?
Si es así, deberás flashear la rom de nuevo y despues el kernel
ewardofr
20/11/13, 16:38:56
http://ak.hiddenbytes.org/
CM11 Changelog:
+ based on CM11 branch
+ fully merged with cm11 branch
+ ecc ecc
KK Changelog:
+ rebase from AOSP source
+ gamma
+ sound
+ s2w
+ halfbreed color
+ thermal enhanced
+ deadline default
+ deadline ssd tuning
+ cfq tuning
+ linaro 4.8.2
+ ecc ecc
Thanks and Rate.
¿Está absado en los bienarios del kernel 4.4?
Lo han liberado ya los de google?
valeriog
20/11/13, 16:49:36
¿Instalaste el deprimator?
Si es así, deberás flashear la rom de nuevo y despues el kernel
No , no lo instalé , con la 132 me va bien todo
valeriog
20/11/13, 17:05:44
Que hay que hacer?
Instalar el stock kernel y luego el 204 kk ?
Porque con el 132 kk me funciona bien todo?
ewardofr
20/11/13, 17:26:50
Es cierto, no funciona el Wifi.
Lo están hablando ahora en xda.
De momento, toca volver al 132 que tan bien va
valeriog
20/11/13, 18:28:42
Instalado kernel stock y luego 204 kk y ya funciona WiFi
fran_ele
20/11/13, 19:33:30
El 132kk con cataclysm, uv -100mv y todas las sync activas, gps en ahorro de energía, WiFi+2Gauto
http://img.tapatalk.com/d/13/11/21/y6u6e3u8.jpg
http://img.tapatalk.com/d/13/11/21/y9y4a4a5.jpg
MementoMoriM
23/11/13, 10:41:10
New kernels up and running
[KITKAT]
nb:
- use this version with KitKat roms (version >= KRT)
download: AK.207.KK http://ak.hiddenbytes.org/
[CM11]
nb:
- use this version with last CM nightly (version >= 21/11/2013)
download: AK.207.CM11 http://ak.hiddenbytes.org/
changelog:
+ linux 3.4.70
+ voltage control
+ gpu min power level when idle
+ gpu fix for freq reporting
+ disable boost voltages (undervolt -25mv for all bin)
+ many fixes for conservative governor
+ ecc
thanks and rate please ... jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj jajaj
El 132kk con cataclysm, uv -100mv y todas las sync activas, gps en ahorro de energía, WiFi+2Gauto
http://img.tapatalk.com/d/13/11/21/y6u6e3u8.jpg
http://img.tapatalk.com/d/13/11/21/y9y4a4a5.jpg
Estos consumos es con la última rom cataclysm, cuales son los pasos para instalar este kernel gracias
Estos consumos es con la última rom cataclysm, cuales son los pasos para instalar este kernel gracias
borrar la configuracion de la aplicacion que tengas para el kernel que lleves ahora mismo y despues dos wipes y flasheas el nuevo kernel.
rturbito
23/11/13, 12:54:39
Funciona el Art con este kernel?
Os agradecería si me podéis indicar como descargar el 132kk, yo no soy capaz
Gracias
ironjon
23/11/13, 14:50:33
Os agradecería si me podéis indicar como descargar el 132kk, yo no soy capaz
Gracias
132?
Creo que van por el 207
132?
Creo que van por el 207
Lo pregunto, ya que unos post más atrás fran_ele comenta que le funciona muy bien, saludos
fran_ele
23/11/13, 19:22:15
Estos consumos es con la última rom cataclysm, cuales son los pasos para instalar este kernel gracias
Es la cataclysm del 16nov
NeophyteZGZ
24/11/13, 16:01:28
LLegan bien las notificaciones con este Kernel?Gracias
[KITKAT] [STABLE][/URL] 216.KK
+ Latest Google
+ Linux 3.4.71
+ Linaro toolchain 4.8.x
+ Linaro Fixes
+ -Os
+ multirom support
+ super stripped to slim < 3.9M zip
+ lmk optimizations
+ disabled boost voltages -25mv for all chips
+ codel net scheduler
+ s2w
+ s2s
+ dt2w
+ dt2w with s2s
+ power button battery saver (disable 2w operations if enabled)
+ init.d optimizations - 00akconfig
download: [URL="http://ak.hiddenbytes.org/"]AK.216.KK (http://ak.hiddenbytes.org/)
MementoMoriM
30/11/13, 18:15:13
[KITKAT] [STABLE]
download: AK.218.KK http://ak.hiddenbytes.org
changelog:
+ fixed voltage interface
+ fast charge
+ dynamic fsync
i want to suggest to press thanks button, 300 downloads for old kernel with only 36 thanks.
Grazie Mille
noulos_9
02/12/13, 11:24:19
Compañeros! alguien sabria decirme porque me gasta tanto este kernel por las noches? un 10% teniendo el movil en modo avión y con greenefy para matar app que queden en segundo plano... Ahora mismo tengo un 35 % de gasto por telefono inactivo, vale que lo tenga mucho en el bolsillo sin usar por tener cosas que hacer... pero con otros no me pasaba esto :( Por lo demas me encanta este kernel, llevo la ultima versión! Gracias de antemano!!
MementoMoriM
03/12/13, 13:19:15
[KITKAT] [STABLE]
download: AK.221.KK http://ak.hiddenbytes.org/
changelog:
+ blx
+ interactive patched to last common and with boost interface
+ 2w: fix problem with hardboot and multitouch
+ 2w: hacky solution for unresponsive screen
+ fixes
+ ecc.
thanks and rate.
MementoMoriM
06/12/13, 11:59:10
[KITKAT] [STABLE - THE LAST STOCK EXPERIENCE]
download: AK.226.KK http://ak.hiddenbytes.org/
last stable.
changelog:
+ fixed voltages interface
+ fixed some 2w problems
+ compiled with new linero 4.8.3 toolchain
thanks a lot to all guys for support.
kokosgeek
06/12/13, 19:16:49
¿Se podría llevar este kernel con ART activado?
slipknot30
06/12/13, 20:37:21
[KITKAT] [STABLE - THE LAST STOCK EXPERIENCE]
download: AK.226.KK http://ak.hiddenbytes.org/
last stable.
changelog:
+ fixed voltages interface
+ fixed some 2w problems
+ compiled with new linero 4.8.3 toolchain
thanks a lot to all guys for support.
Estas en todo crack , gracias
MementoMoriM
07/12/13, 11:40:10
new kernels http://ak.hiddenbytes.org/
[4.4.1 - KITKAT] [STABLE]
download: AK.227.KO
[4.4 - KITKAT] [STABLE]
download: AK.226.KK
[CM11] [STABLE]
download: AK.226.CM11
changelog from the begin of ak:
Code:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.227.KO
anarkia1976 - ak_mako_defconfig: disable OPTIMIZE_FOR_SIZE, Equal O3 Optimizations
anarkia1976 - ak_mako_defconfig: enable XT_TARGET_TCPMSS
anarkia1976 - Kernel Version: AK.226.KK
anarkia1976 - ak-mako-build: switched to new linaro 4.8.3-2013.11.20131205
anarkia1976 - msm: krait: fixed voltages userspace interface
anarkia1976 - Kernel Version: AK.225.KK
anarkia1976 - drivers: input: 2w: sweep2wake add mako definitions
anarkia1976 - drivers: input: 2w: fix compilation with earlyspend
Tremendo como siempre! Soy fan de AK kernel!
http://img.tapatalk.com/d/13/12/08/2uryvu4u.jpg
He puesto este kernel sobre cm11 y la pantalla esta más oscura, con mas contraste (no tema de brillo). ¿Se puede modificar?
He puesto este kernel sobre cm11 y la pantalla esta más oscura, con mas contraste (no tema de brillo). ¿Se puede modificar?
Si, con trickster mod podrás elegir 5 o 6 contrastes diferentes incluidos el stock de Google y el de LG
MementoMoriM
08/12/13, 13:39:48
He puesto este kernel sobre cm11 y la pantalla esta más oscura, con mas contraste (no tema de brillo). ¿Se puede modificar?
Si, con Trickster Mod :thumbup:
cristianch410
08/12/13, 13:50:57
227 es compatible con CM ?. Quiero tener esta para las basadas en CM
MementoMoriM
08/12/13, 13:55:38
227 es compatible con CM ?. Quiero tener esta para las basadas en CM
Es el 226 :D
cristianch410
08/12/13, 13:58:17
Es el 226 :D
Joder queria el ultimo :cry:
MementoMoriM
08/12/13, 14:04:29
Joder queria el ultimo :cry:
Tranquilo, ya sabes que pronto anarkia1976 nos brindará un nuevo kernel ya que tiene un ritmo frenético a la hora de sacar nuevas versiones jajaj
cristianch410
08/12/13, 14:32:13
Tranquilo, ya sabes que pronto anarkia1976 nos brindará un nuevo kernel ya que tiene un ritmo frenético a la hora de sacar nuevas versiones jajaj
Me has pasado lo de Klander, y me he bajado un pedazo arsenal de cosas para flashear esta tarde actualizadas jaja.
MementoMoriM
08/12/13, 22:46:27
[4.4.1 - KITKAT] [EXPERIMENTAL]
download: AK.230.KO.EXP http://d-h.st/vnf
changelog:
+ linux 3.4.73
+ gpu boost on touch
+ mpd from bricked kernel - replace the original mpd
+ auto backup of the previous kernel into sdcard
+ default interactive - for battery only - use ondemand with games
+ auto backup of mpd into bin folder - mpddecision_bck
+ etc etc etc
please rate the thread and press the thanks button.
Grazie mille
ak
MementoMoriM
09/12/13, 21:46:26
[RETURN TO FACTORY KERNEL FROM EXPERIMENTAL BUILD]
download: ak_uninstaller_mako
[4.4.1 - KITKAT] [EXPERIMENTAL]
download: AK.231.KO
[4.4.1 - CM11] [EXPERIMENTAL]
download: AK.231.CM11
http://ak.hiddenbytes.org/
cristianch410
09/12/13, 22:11:02
Como llevas el móvil memento?. He visto lo de twitter 😥
MementoMoriM
09/12/13, 22:45:32
Pues tirando ahora con el Nexus One....esta mañana se me cayó y pantalla estallada,ni respondía lo táctil :banghead:
Pude sacar todo mediante comandos adb en el ordena, y a la espera de presupuesto que me de LG.... Una mierda, cuando vi la pantalla me quede blanco. Pero bueno resignación y ver cuanto me soplan.
Muchas gracias Cristianch por preguntar. Un saludo crack!
Llevo con el kernel un par de días junto cm11 y la verdad que no estoy muy contento con la batería... Lo que pasa es que no sé si achacarlo al kernel o a la ROM.. Ahora mismo me queda un 35%, con 12 horas de uso de las cuales únicamente 52minutos de pantalla...
cristianch410
10/12/13, 00:23:38
Pues tirando ahora con el Nexus One....esta mañana se me cayó y pantalla estallada,ni respondía lo táctil :banghead:
Pude sacar todo mediante comandos adb en el ordena, y a la espera de presupuesto que me de LG.... Una mierda, cuando vi la pantalla me quede blanco. Pero bueno resignación y ver cuanto me soplan.
Muchas gracias Cristianch por preguntar. Un saludo crack!
Te ayudo el capi Klander no?. Llevabas protector y funda?. Suerte con el presupuesto :ok:
MementoMoriM
10/12/13, 01:00:09
Te ayudo el capi Klander no?. Llevabas protector y funda?. Suerte con el presupuesto :ok:
Si ahí ha estado, y llevaba funda estilo flipcover sin protector de pantalla. Pero la caída ha sido de plano en la pantalla contra suelo arenoso a una altura de 140 cm,mortal para nuestros queridos Nexus. Ya se me había caído y no pasó nada,pero esa caída de lleno de pantalla en plano pues fue mortal :banghead:
Ya os contare presupuesto que me den...
Salud!
elandune
10/12/13, 01:11:05
¿que tal van las notis en las últimas versiones? llevo el ak132 y va muy bien, pero igual los nuevos van aún más finos...
Esto no es normal... Alguna sugerencia para tocar alguna configuración?
txuki2005
10/12/13, 15:54:47
Yo use el AK con la purity y tampoco me iba bien la bateria... luego pase a franco... mejoro considerablemente.... asi que pase a matrix y ahora contento contentisimo.... pero cada uno tiene que ir mirando poco a poco
Lo que no recuerdo si matrix es compatible con CM
slipknot30
10/12/13, 15:58:25
Para CM tienes el hells que también va muy bien
MementoMoriM
10/12/13, 16:14:24
Versión 232 ya está en su página http://ak.hiddenbytes.org/
MementoMoriM
10/12/13, 21:56:35
:beer::beer::beer::beer::beer::beer:
MementoMoriM
11/12/13, 18:36:57
[4.4.1 - CM11] [EXPERIMENTAL] http://ak.hiddenbytes.org/
download: AK.233.CM11
Download KO v233
El 232 lo tuve que quitar por los reinicios este que tal?
slipknot30
11/12/13, 21:32:46
Llevo el 233 .CM11 y no encuentro para despertar la pantalla pulsando la pantalla
. EDITIO; encontrado y solucionado
Llevo el 233 .CM11 y no encuentro para despertar la pantalla pulsando la pantalla
. EDITIO; encontrado y solucionado
Te ha dado algún reinicio? Con el trickster para toquetear slipknot
slipknot30
12/12/13, 16:02:40
No , solo he puesto despertar pantalla. Lo que si noto que la batería me vuela
Ponlo en interactive y el mp decisión la freq a 384
slipknot30
12/12/13, 17:46:01
Ponlo en interactive y el mp decisión la freq a 384
Me he pasado a faux
Ya me diras que tal majete! Yo ahora estoy con kernel stock que va genial..
slipknot30
12/12/13, 18:28:05
Ya me diras que tal majete! Yo ahora estoy con kernel stock que va genial..
Pero par CM no vale , no?
MementoMoriM
12/12/13, 21:35:57
Versión 240 de las dos variantes de este kernel de anarkia1976 :cool:
http://ak.hiddenbytes.org/
Pero par CM no vale , no?
Pues no se si para CM vale el stock.. No te arriesgues o pregunta en el hilo de la rom que llevas.. Voy a meter la 240 a ver que tal.
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.242.KO (http://ak.hiddenbytes.org/)
changelog:
+ msm thermal from bricked
+ interactive patches
+ elementalX governor
+ vfp hard float and neon
+ etc.
Probando.. :P
elandune
17/12/13, 23:04:55
¿van bien las notis con las ultimas versiones? llevo con el AK132 un montón de tiempo porque me llegan bien y me da respeto tocar jeje
¿se notan mejoras importantes con respecto al 132 que llevo?
¿van bien las notis con las ultimas versiones? llevo con el AK132 un montón de tiempo porque me llegan bien y me da respeto tocar jeje
¿se notan mejoras importantes con respecto al 132 que llevo?
Si a mi perfectas.. Incluso con la optimización WiFi activada. ;)
Trae nuevos governors y el 242 esta basado en el kernel de 4.4.2
elandune
19/12/13, 21:34:21
¿para la revolution sería el 242KO verdad? ¿tengo que pasar wlanrevert o algo viniendo del AK132?
Instalado. Ya comentaré impresiones
Efectivamente he necesitado el wlanrevert de lana
EDITO:
¿La frecuencia mínima a 900 y pico mio es porque viene activado mpdesicion? ¿puedo desactivarlo y ponerlo a 384 que es la mínima que permite para llevarlo como tenía el ak132 sin problema verdad o tengo que quitar algo más?
¿governor intellidemand no admite? ¿alguno recomendado?¿interactive?
hay versión 251 ya
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.251.KO (http://ak.hiddenbytes.org/)
changelog:
+ added new frequencies from 162Mhz to 1944Mhz
+ default min 270Mhz max 1620Mhz
+ slab slob slub patches
+ mpd core min 1 max 4
+ mpd tuning
+ elementalx patches
+ interactive patches
+ cpufreq patches
+ speed optimizations
+ etc
Cuidadin lo que tocais que trae OC
elandune
20/12/13, 11:34:12
me he tenido que volver al ak132. No he debido saber quitar el mpdecsion o algo, pero devoraba la batería y tardaba un mundo en cargar, probablemente por eso mismo
MementoMoriM
24/12/13, 22:47:37
Ak.256.KO disponible hace ya.... Jajaj
http://ak.hiddenbytes.org/downloads/AK.256.KO.zip
Felices fiestas!
MementoMoriM
25/12/13, 17:52:56
4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.300.KX. http://ak.hiddenbytes.org/
changelog:
+ row -> default
+ sio
+ fiops
+ intellidemand v5.0 -> default
- elementalX
+ idle fixes
+ codel scheduler fixes
+ tcp optimizations
+ bfq
+ random tweaks
+ filter touch sysfs
+ ecc ecc ecc
merry xmas to all xda guys!
Y felices fiestas para los poc@s de aquí 😈
pepelopelope
25/12/13, 18:17:03
4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.300.KX. http://ak.hiddenbytes.org/
changelog:
+ row -> default
+ sio
+ fiops
+ intellidemand v5.0 -> default
- elementalX
+ idle fixes
+ codel scheduler fixes
+ tcp optimizations
+ bfq
+ random tweaks
+ filter touch sysfs
+ ecc ecc ecc
merry xmas to all xda guys!
Y felices fiestas para los poc@s de aquí 😈
Si no se comenta es porque va bien! Pero gracias por el post
Me encanta es un puto mechero en reposo.. AK300 Xmas edition
http://img.tapatalk.com/d/13/12/26/ynu7e6u8.jpg
MementoMoriM
27/12/13, 17:34:53
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.303.KXP. http://ak.hiddenbytes.org/downloads/AK.303.KXP.zip
changelog on git.
thanks and rate are appreciated.
slipknot30
28/12/13, 18:42:16
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.303.KXP. http://ak.hiddenbytes.org/downloads/AK.303.KXP.zip
changelog on git.
thanks and rate are appreciated.
Probando en BeerGang
MementoMoriM
28/12/13, 19:04:24
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.304.KXP http://ak.hiddenbytes.org/downloads/AK.304.KXP.zip
changelog:
+ zram support
+ revert powersave_bias to default
+ readahead 512KB max, 32KB min
+ fix logic for backup of old wifi drivers
Please
press thanks
and
rate thread
slipknot30
28/12/13, 19:06:23
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.304.KXP http://ak.hiddenbytes.org/downloads/AK.304.KXP.zip
changelog:
+ zram support
+ revert powersave_bias to default
+ readahead 512KB max, 32KB min
+ fix logic for backup of old wifi drivers
Please
press thanks
and
rate thread
:mad::mad::mad::mad::mad::mad::mad::mad::mad:
MementoMoriM
28/12/13, 19:07:17
:mad::mad::mad::mad::mad::mad::mad::mad::mad:
Ya, suele pasar..... metes y actualizan jeje
MementoMoriM
28/12/13, 23:16:25
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.305.KXP http://ak.hiddenbytes.org/downloads/AK.305.KXP.zip
changelog:
+ fix zram
+ enable ksm
+ disable some debugs
+ revert to stock 400mhz max for gpu
thanks guys for report and testing.
AK tiene una versión estable y luego cada 2 o 3 dias va sacando experimentales.. Yo voy probando también un par de kernels a la semana y genial.. Bueno de hecho mi móvil no quiere otro que no sea AK ya lo sabéis.. :P
slipknot30
29/12/13, 13:54:59
AK tiene una versión estable y luego cada 2 o 3 dias va sacando experimentales.. Yo voy probando también un par de kernels a la semana y genial.. Bueno de hecho mi móvil no quiere otro que no sea AK ya lo sabéis.. :P
Si si , doy fe de tu fidelidad con AK:D:D
genevois26
29/12/13, 16:08:11
Como tenéis configurado el kernel? Que frecuencia mínima y máxima tenéis puesta?
Gracias!
Como tenéis configurado el kernel? Que frecuencia mínima y máxima tenéis puesta?
Gracias!
Yo lo tengo tal y como viene, las frecuencias las maneja el mpdecision y a mi me da buenos consumos.. Aunque la mínima es 384 va escalando rapidamente con las máximas..
Buenas, estoy leyendo vuestros comentarios sobre este kernel, nunca lo he probado,
Para la versión 4.4.2, que recomendáis que meta la última experimental o la estable
Gracias
Buenas, estoy leyendo vuestros comentarios sobre este kernel, nunca lo he probado,
Para la versión 4.4.2, que recomendáis que meta la última experimental o la estable
Gracias....
MementoMoriM
30/12/13, 00:45:57
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.307.KXP http://ak.hiddenbytes.org/
changelog:
+ O3
+ gpu 450mhz
+ ipv4 and netfilter optimizations
+ disable gentle fair sleep
+ rcu boost
+ cpufreq increase priority
+ some opt and fixes
thanks and rate.
ak
Buenas, estoy leyendo vuestros comentarios sobre este kernel, nunca lo he probado,
Para la versión 4.4.2, que recomendáis que meta la última experimental o la estable
Gracias
Todas van bien.. Los exp no me han dado ningún problema te recomiendo la ultima versión 307
Todas van bien.. Los exp no me han dado ningún problema te recomiendo la ultima versión 307
Muchas gracias por tu consejo
slipknot30
30/12/13, 10:53:02
Yo llevo el 304 ya veremos que tal
He notado que la 307 va un poco mas fluida que las versiones anteriores,la puse anoche y en reposo es una linea recta como siempre, para mi es el mejor en ese aspecto y mira que he probado diferentes kernels y siempre vuelvo a este.. Además que el dev siempre busca mejorar y tiene muy en cuenta las experiencias de los testers..
MementoMoriM
30/12/13, 16:36:53
[EXP - NEW PRIMA DRIVERS]
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.309.KXP http://ak.hiddenbytes.org/downloads/AK.309.KXP.zip
[4.4.2 - CM11] [EXPERIMENTAL]
download: AK.309.CM11P http://ak.hiddenbytes.org/downloads/AK.309.CM11P.zip
Nb:
all versions (cm and aosp) have new prima drivers inside!
changelog:
+ wheatley
+ lazy
+ intellidemand
+ elementalx
+ interactive: update governor to the latest CAF source
+ ecc ecc ecc
full changelog for cm11: http://forum.xda-developers.com/showthread.php?p=48963062
THANKS
All devs on Xda
elandune
30/12/13, 21:11:39
gracias por traernos cada versión memento
slipknot30
30/12/13, 21:26:36
gracias por traernos cada versión memento
Lo de memento es como tener un actualizador automatico......menudo curro se pega el tío
MementoMoriM
30/12/13, 21:38:24
Lo de memento es como tener un actualizador automatico......menudo curro se pega el tío
Entre tod@s hacemos de este lugar, un gran sitio
:-) . Gracias a vosotros también compas !
Salud!
Consumos con KinderV4 y AK309 y no tengo ni un ciclo hecho.. Espectacular! :O
http://img.tapatalk.com/d/13/12/31/ruhy6ypu.jpghttp://img.tapatalk.com/d/13/12/31/uteny8un.jpg
Gracias memento por tenernos siempre al día.. Y a todos ya aprovecho y os deseo feliz salida y entrada de año! Un abrazo
rturbito
31/12/13, 11:57:50
Consumos con KinderV4 y AK309 y no tengo ni un ciclo hecho.. Espectacular! :O
http://img.tapatalk.com/d/13/12/31/ruhy6ypu.jpghttp://img.tapatalk.com/d/13/12/31/uteny8un.jpg
Gracias memento por tenernos siempre al día.. Y a todos ya aprovecho y os deseo feliz salida y entrada de año! Un abrazo
con que configuración compañero, que te quiero copiar.
Gracias,:navi:
Westwood/Row/Ondemand el mp decisión activado tal cual escala bien.. Regulador GPU Ondemand/freq.450.
En el segundo ciclo probaré con intellidemand o interactive que también dan buenos consumos..
MementoMoriM
02/01/14, 14:40:10
[EXP - XGENESIS - CAF BASED - NEW PRIMA DRIVERS]
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.010.XGENESIS http://ak.hiddenbytes.org/index.php
[4.4.2 - CM11] [EXPERIMENTAL]
download: AK.010.XGENESIS.CM. http://ak.hiddenbytes.org/index.php
features:
+ based on cyanogen caf kernel 3.4.0
+ new prima wifi drivers
+ codel scheduler
+ otg
+ cdrom mount
+ kexec
+ gamma
+ sound
+ msm mpd
+ msm thermal
+ dt2w
+ s2w
+ fcharge
+ fsync
+ touch filter
+ voltage control
+ stock cpu and gpu freqs
+ row
+ ecc ecc ecc
Alguien a probado la última actualización, de verdad soporta OTG?
cloudax
02/01/14, 15:30:13
Alguien a probado la última actualización, de verdad soporta OTG?
Yo la tengo y por el momento es la mas fluida y rapida, en antutu me da casi 22.000 puntos aun me falta probar la bateria pero supongo que durara como la stock ya que contiene los cambios minimos.
Respecto al OTG se supone que lo soporta desde hace varias versiones pero soy incapaz de activarlo, en el hilo de XDA la gente que ha preguntado les han dicho que miren este post que viene explicado pero yo no me entero http://forum.xda-developers.com/showthread.php?t=2181820
A ver si alguien saca algo en claro sobre como activar el OTG con este kernel.
fran_ele
02/01/14, 15:58:38
Para activar el otg hay que poner la siguiente linea en la consola con permisos SU (poned primero su en la consola y aceptar permisos root)
echo 1 > /sys/module/msm_otg/parameters/otg_hack_enable
Con eso ya deberia funcionar un raton, para montar una unidad uso stickmount en el play
Lo he probado en otras versiones y funciona, incluso puedo escribir en ntfs pero no estoy seguro si es por algo que meti hace tiempo llamado ntfs-3g y no me acuerdo ni como, titanium backup se ocupa de todo
cloudax
02/01/14, 18:31:01
Bueno después de probar un rato la ultima versión del kernel y gracias al compañero fran_ele por solucionar la duda del otg puedo decir que para mi es la mejor versión que he probado en mi Nexus 4.
Valores stock con otg gamma y algo de UV va como la seda, todo muy suave y jamas había tenido una puntuación tan alta sin OC.
http://img.tapatalk.com/d/14/01/03/u6egypym.jpg
withoutme
02/01/14, 19:36:13
Me puede alguien decir como se descarga? Igual suena a pregunta tonta pero no lo consigo...
En una de las paginas le he dado a download zip pero me descarga 30 megas (y sigue) asi que he cancelado
cloudax
02/01/14, 19:39:22
Me puede alguien decir como se descarga? Igual suena a pregunta tonta pero no lo consigo...
En una de las paginas le he dado a download zip pero me descarga 30 megas (y sigue) asi que he cancelado
http://ak.hiddenbytes.org/downloads/AK.010.XGENESIS.zip
withoutme
02/01/14, 19:45:47
http://ak.hiddenbytes.org/downloads/AK.010.XGENESIS.zip
Le estaba dando a sources.. estoy atontado.
Gracias!
withoutme
03/01/14, 00:12:36
Por que en el trickster me aparece la frecuencia minima de cpu a 918mhz y aunque lo cambie se vuelve a poner a esa frecuencia? Es normal?
Por que en el trickster me aparece la frecuencia minima de cpu a 918mhz y aunque lo cambie se vuelve a poner a esa frecuencia? Es normal?
Mira si el mpdecision lo tienes activado
withoutme
03/01/14, 00:18:06
Mira si el mpdecision lo tienes activado
Si, y me sale esto que adjunto, lo tengo que desactivar?
http://img.tapatalk.com/d/14/01/03/uqeryze6.jpg
Donde pone boost freq cpu0 ponlo a 384
kokosgeek
03/01/14, 01:50:30
A alguien más le pasa que al activar el dt2w y el sw2, al reiniciar no va el táctil??
A mi me suele pasar con todos los kernels que llevan esa opción no solo este, así que paso de usarlo..
MementoMoriM
03/01/14, 10:59:04
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.012.XGENESIS.
[4.4.2 - CM11] [EXPERIMENTAL]
download: AK.012.XGENESIS.CM
http://ak.hiddenbytes.org/index.php
Otro? Xddd estoy por volver al de fin de año.. Este lo notó un poco tragón..
Creo que voy a hacer lo mismo,
slipknot30
03/01/14, 21:14:26
Yo ya no se ni que hacer:sly::sly::sly::sly::sly:
MementoMoriM
04/01/14, 15:42:45
[4.4.2 - KITKAT] [EXPERIMENTAL]
download: AK.013.XGENESIS. http://ak.hiddenbytes.org/downloads/AK.013.XGENESIS.zip
[4.4.2 - CM11] [EXPERIMENTAL]
download: AK.013.XGENESIS.CM. http://ak.hiddenbytes.org/downloads/AK.013.XGENESIS.CM.zip.filepart
changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.013.XGENESIS.CM
anarkia1976 - ak-mako-build: compile kcontrol gpu module
anarkia1976 - clocks-8960: gpu: add 180 freq and fix caf compatibility for kcontrol
Dennis Rassmann - clocks-8960: gpu: allow oc to 487.5 & 533.333 Mhz
anarkia1976 - ak_mako_defconfig: add SCHED_AUTOGROUP
Lance Poore - SCHEDULER: Autogroup patch group by current user android UID instead of task ID
Miao Xie - lib/string: use glibc version
Miao Xie - lib/memcopy: use glibc version
Este kernel que tal? Con las aopk y cm es estable o aún esta verde?
Yo no lo he probado con CM, con AOSP de escándalo..
slipknot30
06/01/14, 01:58:51
Este kernel que tal? Con las aopk y cm es estable o aún esta verde?
Le llevo en vanir (CM) y muy bien
new v15 xgenesis kernel
[donwloads]
uninstaller: ak_unistaller_mako_prima_lib (http://ak.hiddenbytes.org/)
aosp: ak.015.xgenesis (http://ak.hiddenbytes.org/)
cm: ak.015.xgenesis.cm (http://ak.hiddenbytes.org/)
[install/uninstall]
install steps:
- go to recovery
- flash ak kernel
- reboot
uninstall steps:
- go to recovery
- flash ak_uninstaller_mako_prima_lib
- flash target kernel
- reboot
[changelog]
- linaro 4.7.3
- O3
- bundi iphone color profile
- 487Mhz default for gpu
- backup of power.msm8960 (ramdisk)
- add krait and ondemand optimizations (ramdisk)
- optimize backup before flash (ramdisk)
cristianch410
07/01/14, 20:30:18
La anterior en la Commotio me va de lujo, haciendome olvidar un tiempo franco, no se si probar la nueva o dejar lo que ya funciona bien jeje
La ultima versión es la 013, y la llevo en la vanir y de consumo nada bueno, por lo menos los dos dias que lo llevo.
slipknot30
07/01/14, 21:04:00
La ultima versión es la 013, y la llevo en la vanir y de consumo nada bueno, por lo menos los dos dias que lo llevo.
Mete piasek
cristianch410
07/01/14, 21:37:43
Pues yo de lujo la 013 con Commotio, acabo de poner a bajar las dos de hoy para diferentes bases, luego se la pondre a la KInder
La 015 con Kinder (L)
Y os dejo consumos de ayer con kinder y la 013..
http://img.tapatalk.com/d/14/01/08/e8ajytaj.jpghttp://img.tapatalk.com/d/14/01/08/yhujubyb.jpg
MementoMoriM
09/01/14, 15:47:40
I am not responsible for any damage to your phone.
Read before downloading or posting in the thread:
Proceed with caution if you have no experience.
[XGENESIS KERNEL v.016]
A kernel based on CAF CM branch.
[donwloads]
uninstaller: ak_unistaller_mako_prima_lib. http://ak.hiddenbytes.org
aosp: ak.016.xgenesis. http://ak.hiddenbytes.org
cm: ak.016.xgenesis.cm. http://ak.hiddenbytes.org
[install/uninstall]
install steps:
- go to recovery
- flash ak kernel
- reboot
uninstall steps:
- go to recovery
- flash ak_uninstaller_mako_prima_lib
- flash target kernel
- reboot
[changelog]
- linaro 4.7.3
- ext4 prevent kernel panic
- revert cd rom mount
- force cpuN to follow cpu0 freq
- sync patches
- removed spam from log
thanks a lot
to all devs on xda
cristianch410
10/01/14, 01:16:50
Y la versión estable?, no la veo por ningún sitio. Me bajaré la ultima s ver si no se congela en el bloqueo como la 15 en la kinder
El 16 que es de ayer es estable y va que se las pela.. Cuando son versiones test lo suele decir.. A mi no me ha dado problema ninguno y mira que los pruebo todos.. xD
JoseRGM69
10/01/14, 05:31:14
que tal va este kernel en bateria? cual es la frecuencia minima y maxima q viene por defecto y que governor y planificador vienen por defecto? y cuantos nucleos minimos y maximos? y soporta touch control? saludos
alexret
10/01/14, 08:45:21
que tal va este kernel en bateria? cual es la frecuencia minima y maxima q viene por defecto y que governor y planificador vienen por defecto? y cuantos nucleos minimos y maximos? y soporta touch control? saludos
En el primer post tienes las respuestas
MementoMoriM
10/01/14, 11:14:45
[XGENESIS KERNEL v.017]
A kernel based on CAF CM branch.
[donwloads]. http://ak.hiddenbytes.org
[install/uninstall]
install steps:
- go to recovery
- flash ak kernel
- reboot
uninstall steps:
- go to recovery
- flash ak_uninstaller_mako_prima_lib
- flash target kernel
- reboot
[changelog]
Nb: please flash stock kernel of your rom before this version!
- arm krait optimizations
- arm cache flush patches
- arm cache LoUIS patches
[XGENESIS KERNEL v.021]
- remove a lot of debug stuff
- lmk make debug usefull
- ext4 fixes
- enable arch power
- cpufreq fix policy when user and kernel use min/max
- remove bundi color profile
Download:
uninstaller: ak_unistaller_mako_prima_lib (http://ak.hiddenbytes.org/)
aosp:ak.021.xgenesis (http://ak.hiddenbytes.org/)
cm: ak.021.xgenesis.cm (http://ak.hiddenbytes.org/)
cristianch410
13/01/14, 15:39:29
Instalado en la R9, a ver si esta version no me da freeze en el bloqueo como otras versiones, o otros kernel. en cualquier rom
withoutme
14/01/14, 01:11:48
Que la gpu este a 487 es normal?
Que la gpu este a 487 es normal?
Correcto tranquilo que es la configuracion stock que proporciona ak, si no te gustan los valores puedes cambiarlos con trickster u otra app similar..
[XGENESIS KERNEL v.024 - EXPERIMENTAL]
- make possible retention for cpu0
- overclock from 162Mhz to 1944Mhz
- remove some debugs
- bfq
- ondemand opt
- verious writeback fixes
Download: :
uninstaller: ak_unistaller_mako_prima_lib (http://ak.hiddenbytes.org/)
aosp: ak.024.xgenesis (http://ak.hiddenbytes.org/)
cm: ak.024.xgenesis.cm (http://ak.hiddenbytes.org/)
cristianch410
14/01/14, 19:32:59
Yo me quedo con el de ayer estable por un tiempo, ya que me va de perlas. Paso de experimentar por un tiempo con otros kernel o versiones, no tengo ganas de freeze en el bloqueo jeje
Yo de momento tambien me quedo con el 21 que como dices va de coña, es una pasada lo que evoluciona este kernel cada 2 dias como mucho update.. de lo del freeze en el bloqueo pasa si activas el s2w o el dt2w yo lo tengo desactivado porque no lo uso y ningún problema.
cristianch410
15/01/14, 02:08:05
Yo de momento tambien me quedo con el 21 que como dices va de coña, es una pasada lo que evoluciona este kernel cada 2 dias como mucho update.. de lo del freeze en el bloqueo pasa si activas el s2w o el dt2w yo lo tengo desactivado porque no lo uso y ningún problema.
Que va tío no toco nada, solo color, sonido y vibración en el tricktermod. Me ha pasado con diferentes kernel y ROM, ahora mismo 0 en R9 + AK21 como dije
Que va tío no toco nada, solo color, sonido y vibración en el tricktermod. Me ha pasado con diferentes kernel y ROM, ahora mismo 0 en R9 + AK21 como dije
Cuando veas que te ocurren cosas raras como eso que comentas, flashea el ak unnistaller y acto seguido flasheas el kernel que quieras.. y no tendria que darte problemas. :ok:
elandune
15/01/14, 10:07:40
¿el [XGENESIS KERNEL v.021] (que se supone que es el milestone) también viene con mp-decision activado de origen?
¿el [XGENESIS KERNEL v.021] (que se supone que es el milestone) también viene con mp-decision activado de origen?
Si también viene activado, pero como te dije se puede cambiar la mínima, ahora lo tengo con row/interactive y mira como escala:
http://img.tapatalk.com/d/14/01/15/yga6y8ev.jpg
elandune
15/01/14, 23:07:39
si es que me va tan bien el ak132kk que me da cosa tocar!!!
MementoMoriM
16/01/14, 03:07:57
Dejo nuevos logos :sly:
449567449568
http://img.tapatalk.com/d/14/01/16/getu8aje.jpghttp://img.tapatalk.com/d/14/01/16/e9uje9ed.jpg
cristianch410
17/01/14, 00:25:46
Estoy teniendo problemas con la 21 con la base CM en las notificaciones del whatsapp. En AOSP no me pasa, recomendais alguna versión para cm que vaya bien?, o tendré que abandonar este kernel para cm
elandune
17/01/14, 13:16:47
eso es lo que más cosa me da de tocar el kernel, que a mi las notificaciones con el ak132 me van bien y me da cosa tocar y que por cambiar empiecen a fallar
Con 4.4.2 no he tenido ningún problema con las notis.. Además lleva los prima drivers para el WiFi, aunque no he llevado ninguna CM todavía..
MementoMoriM
17/01/14, 14:31:04
[XGENESIS KERNEL v.032 - EXPERIMENTAL]
A kernel based on CAF CM branch.
Quote:
[donwloads]
**
uninstaller:*ak_unistaller_mako_prima_lib. http://ak.hiddenbytes.org/
aosp:*ak.032.xgenesis. http://ak.hiddenbytes.org/
cm:*ak.032.xgenesis.cm. http://ak.hiddenbytes.org/
[install/uninstall]
**
install steps:
- go to recovery
- flash ak kernel
- reboot
uninstall steps:
- go to recovery
- flash ak_uninstaller_mako_prima_lib
- flash target kernel
- reboot
[changelog]
**
- new prima drivers v.3.2.3.191_caf
- merged with last cm11 branch caf fixes
- wlan and cfg80211 fixes
- interactive fixes and tuning
- ext4 fixes
- sched optimizations
- writeback optimizations
- removed some debugs
- arm optimizations
- perf fixes
- min cpu 270Mhz, max cpu 1620Mhz
- ecc ecc ecc
elandune
17/01/14, 15:28:13
eso de new prima drivers suena bien :)
cristianch410
17/01/14, 15:45:47
Lo que no entiendo es por que este hombre usa los driver prima si en 4.4.2 llegan bien las notis. Es más con ellos en CM no me llegan 😥
txuki2005
17/01/14, 16:03:31
Lo que tiene que hacer el tio... es no sacar tantos updates seguidos..:loco: mas pausados.. asi no hay manera... disisto por este kernel :silbando:
Y eso que me gusta...:cry:
elandune
17/01/14, 17:13:59
Lo que no entiendo es por que este hombre usa los driver prima si en 4.4.2 llegan bien las notis. Es más con ellos en CM no me llegan ��
no estoy de acuerdo con eso.
Yo uso el ak132 porque me llegan bien, pero probé el hells core b42 si no recuerdo mal y lo tuve sólo 1h o así, pero porque fui a comer, volví y no marcaba nada el led, enciendo la pantalla y me llegan 60 whatsapp con hora de 35-40 min antes....
EDITO:
instalando el último,[XGENESIS KERNEL v.032 - EXPERIMENTAL], a ver como va con los nuevos drivers prima...
EDITO2: ¿por qué hay tan pocos governors? no hay ni intellidemand ni wheatley no?
EDITO3: pues pinta bien la cosa. Notificaciones perfectas y el consumo tiene buena pinta a la espera de hacer algún ciclo completo de carga
¿que governor usáis? yo llevo interactive ya que intellidemand que solia usar no viene
MementoMoriM
21/01/14, 20:35:11
New test release.
please dirty flash your rom.
changelog:
https://github.com/anarkia1976/AK-xG...k-xGenesis-014
download:
AK.041.XGENESIS.zip. http://forum.xda-developers.com/attachment.php?attachmentid=2530622&d=1390332146
Hola voy a instalar este kernel por primera vez, es esta la versión estable??
http://img.tapatalk.com/d/14/01/23/5avyvery.jpg
MementoMoriM
23/01/14, 00:22:33
Hola voy a instalar este kernel por primera vez, es esta la versión estable??
http://img.tapatalk.com/d/14/01/23/5avyvery.jpg
Sí, lo es :thumbup:
Hola voy a instalar este kernel por primera vez, es esta la versión estable??
Si , es la estable , la milestone
Sí, lo es :thumbup:
Si , es la estable , la milestone
Gracias, llevo un rato con ella y por ahora bien, llevo despues de malas experiencias con B43 de hells (Ruidos raros en las grabaciones de videos) y 12,5 de Matr1x. (Cortes y trompicones en el sonido), espero que esta se porte bien con la bateria.
Trae este kernel la opción de carga rápida? Realmente eso se nota?
slipknot30
23/01/14, 16:55:51
Trae este kernel la opción de carga rápida? Realmente eso se nota?
Se nota que carga mas rápida la batería pero también en la vida de ella
elandune
24/01/14, 01:24:34
Trae este kernel la opción de carga rápida? Realmente eso se nota?
Se nota que carga mas rápida la batería pero también en la vida de ella
y creo que eso es sólo por usb ¿no?
slipknot30
24/01/14, 02:08:15
y creo que eso es sólo por usb ¿no?
Creo que no , lo único que si lo tienes activado al conectar al PC puede que no lo reconozca
cristianch410
24/01/14, 14:37:35
Alguna version cm que lleguen las notis?. Es el que mas se parece a franco en fluidez y lo quiero de nuevo en CM jajaaja
MementoMoriM
24/01/14, 14:51:33
Alguna version cm que lleguen las notis?. Es el que mas se parece a franco en fluidez y lo quiero de nuevo en CM jajaaja
Pues se supone que con los divers prima que le introduce en el kernel no deberías tener problemas con las notificaciones jejej
cristianch410
24/01/14, 15:10:22
Viendo el comentario de elardune parece que con los nuevos prima funciona bien, voy a bajar el ultimo
mikelito01
24/01/14, 18:24:42
Alguna version cm que lleguen las notis?. Es el que mas se parece a franco en fluidez y lo quiero de nuevo en CM jajaaja
A mi con la AK 013 Genesis CM las notis perfectas, y todo lo demas tambien
Una pregunta, la versión Milestone que configurando de colores lleva por defecto? Me gusta mucho y quiero tenerla por si cambio de kernel (raro con lo bien que va este)
cristianch410
27/01/14, 17:59:45
A mi con la AK 013 Genesis CM las notis perfectas, y todo lo demas tambien
Y yo después de varios días con la ultima beta, 0 problemas también. Y eso que estoy en CM que es donde solo me daban problemas las notis con este kernel.
powspirit
28/01/14, 16:46:44
Como tienen ustedes configurado este kernel??? ya tengo mucho tiempo usandolo... ahora lo uso en CM... pero lo unico que no me gusta de este kernel es que se calienta mucho el telefono.
Yo ahora lo tengo con row/interactive y perfecto consumo y rendimiento.. El móvil no se me calienta y menos con el frío que hace.. XD
slipknot30
29/01/14, 09:56:33
Yo ahora lo tengo con row/interactive y perfecto consumo y rendimiento.. El móvil no se me calienta y menos con el frío que hace.. XD
Jajajajajajaja
kokosgeek
05/02/14, 09:16:01
[XGENESIS KERNEL v.050 - EXPERIMENTAL]
A kernel based on CAF CM branch.
[changelog]
- cfq tuning
- added 81mhz super low step
- set the l2 bw for low freqs to max
- merged with last cm11 patches
MementoMoriM
05/02/14, 09:42:47
Dejo el enlace de las nuevas versiones http://ak.hiddenbytes.org
elandune
05/02/14, 10:02:57
gracias memento por tenernos actualizados de este gran kernel
dominicandroid
07/02/14, 03:50:37
Porque no tiene gobernor como weattley y intellidemand? Gracias!
Pichigonzalo
10/02/14, 11:03:02
Habrá que probar este kernel. Que tal se comporta con las nptis? Y consumo/rendimiento?
rturbito
10/02/14, 12:29:02
cual es la versión estable para aosp??
gracias,
MementoMoriM
10/02/14, 14:23:22
cual es la versión estable para aosp??
gracias,
Ak.050 http://ak.hiddenbytes.org/downloads/AK.050.XGENESIS.MAKO.zip
MementoMoriM
12/02/14, 15:19:02
New kernel online:
[XGENESIS KERNEL v.055 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako_prima_lib http://ak.hiddenbytes.org/downloads/ak_uninstaller_mako_prima_lib.zip
aosp: ak.055.xgenesis.mako. http://ak.hiddenbytes.org/downloads/AK.055.XGENESIS.MAKO.zip
cm: ak.055.xgenesis.mako.cm http://ak.hiddenbytes.org/downloads/AK.055.XGENESIS.MAKO.CM.zip
cristianch410
12/02/14, 18:31:20
Que tal va Memen?, el 50 va de lujo en hellkat
MementoMoriM
12/02/14, 21:33:14
Que tal va Memen?, el 50 va de lujo en hellkat
Pues con la Mahdi llevó el propio kernel que es una delicia. Haber si lo pruebo, pero supongo que será bueno como en la línea de anarkia1976 :cool:
MementoMoriM
18/02/14, 10:19:34
[XGENESIS KERNEL v.058 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako_prima_lib http://ak.hiddenbytes.org/downloads/ak_uninstaller_mako_prima_lib.zip
aosp: ak.058.xgenesis.mako http://ak.hiddenbytes.org/downloads/AK.058.XGENESIS.MAKO.zip
cm: ak.058.xgenesis.mako.cm http://ak.hiddenbytes.org/downloads/AK.058.XGENESIS.MAKO.CM.zip
[changelog]
- intellidemand 5.0
- intelliactive
- linux 3.4.80+
- neon pure
- new toolchain linaro/cr83 a15 4.8.3
- ecc ecc ecc
kokosgeek
18/02/14, 11:51:19
[XGENESIS KERNEL v.058 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako_prima_lib http://ak.hiddenbytes.org/downloads/ak_uninstaller_mako_prima_lib.zip
aosp: ak.058.xgenesis.mako http://ak.hiddenbytes.org/downloads/AK.058.XGENESIS.MAKO.zip
cm: ak.058.xgenesis.mako.cm http://ak.hiddenbytes.org/downloads/AK.058.XGENESIS.MAKO.CM.zip
[changelog]
- intellidemand 5.0
- intelliactive
- linux 3.4.80+
- neon pure
- new toolchain linaro/cr83 a15 4.8.3
- ecc ecc ecc
Instalado en omnirom, a ver que tal se comporta, que ya hace tiempo que no lo pruebo....
Por cierto, alguno sabe la mejora real, en el uso del movil que proporciona el lkernel linux 3.4.80 sobre el 3.4.0?¿?¿
Edito. Ya me lo ha contestado el propio Ak:
hay un montón de correcciones en varias partes del kernel:
- ext4
- memory
- wireless
- ecc ecc
Yo ahora estoy con matrix 13 pero antes del finde ya estaré de nuevo con AK.. Jejej ir comentando impresiones!
kokosgeek
19/02/14, 11:39:43
OLD PRIMA WIFI KERNEL
Nb:
dirty flash rom before kernel for fix wifi drivers!
Download:
AK.061.XGENESIS.MAKO.zip (http://forum.xda-developers.com/attachment.php?attachmentid=2588262&d=1392805293)
Test kernel with old prima drives plus:
- linaro power efficent workqueu
- 4 core stats
- intelliplug
- krait opt
- crypto opt
- neon support
- ecc ecc
ewardofr
19/02/14, 13:33:42
¿Porque le quita a la nueva versión los prima?
MementoMoriM
19/02/14, 13:54:57
¿Porque le quita a la nueva versión los prima?
Incompatibilidades de los drivers prima con las nuevas versiones de ROMs , ni el propio anarkia1976 sabe por qué :rolleyes:
Saludos!
kokosgeek
22/02/14, 19:00:18
AOSP : [XGENESIS KERNEL v.063 - MILESTONE] (http://ak.hiddenbytes.org/downloads/AK.063.XGENESIS.MAKO.zip)
CM : [XGENESIS KERNEL v.063.CM - MILESTONE] (http://ak.hiddenbytes.org/downloads/AK.063.XGENESIS.MAKO.CM.zip)
- add sysfs for the wakeup reason
- linux 3.4.81+
- tcp fixes
- revert to default MAKO prima drivers
- add quad core stats
- intelliplug
rturbito
22/02/14, 21:14:24
Milestone que son las estables?
Pues me han hecho la puñeta quitando los drivers prima, porque en el router que tengo en el curro solo me funciona con los prima. Hay alguna alternativa o se me han terminado ya las actualizaciones de kernel?
Se pueden instalar los prima por separado en cualquier kernel?
Instala una versión antigua que lleve los prima
MementoMoriM
28/02/14, 14:51:51
Bueno probando éste gran kernel con mahdi a ver si consigo mejorar consumos jejeje:risitas:
MementoMoriM
28/02/14, 15:15:58
Una pregunta que hace mucho que no lo probaba jejej
¿Mantenéis configuraciones que viene o cambiaís algo? ¿Y de consumos cómo anda?
Ya os daré impresiones como me ha ido :cool:
Saludos!
cristianch410
28/02/14, 20:22:48
Las ultimas dan problemas con notis entonces?
MementoMoriM
28/02/14, 20:35:24
Las ultimas dan problemas con notis entonces?
No, yo no he tenido problemas con las notificaciones :D
MementoMoriM
01/03/14, 15:27:26
Consumos con Mahdi ROM :thumbup:
http://img.tapatalk.com/d/14/03/01/zabyzuhu.jpg
http://img.tapatalk.com/d/14/03/01/u7e8yqu9.jpg
http://img.tapatalk.com/d/14/03/01/tuhu4e6y.jpg
MementoMoriM
05/03/14, 16:59:43
No time sorry but new kernel is online on hiddenbytes for aosp and cm:
v.070
install steps:
- flash kernel
- install synapse app from market
- enjoy
please rate the thread and press the thanks button.
Tonight or tomorrow for changelog and updated infos.
Versión AOSP http://ak.hiddenbytes.org/downloads/AK.070.XGENESIS.MAKO.zip
Versión CM http://ak.hiddenbytes.org/downloads/AK.070.XGENESIS.MAKO.CM.zip
Al uninstaller http://ak.hiddenbytes.org/downloads/ak_uninstaller_mako.zip
http://img.tapatalk.com/d/14/03/05/esutu6a7.jpg
http://img.tapatalk.com/d/14/03/05/myju5a7a.jpg
http://img.tapatalk.com/d/14/03/05/tehevasy.jpg
drbacteria
05/03/14, 20:06:35
Este kernel tiene driver prima?
MementoMoriM
06/03/14, 14:49:57
Este kernel tiene driver prima?
Los quito por que daba problemas con las nuevas ROMs , si lo necesitas hay versiones anteriores que los tiene :thumbup:
Dejo changelog:
AK KERNEL anarkia1976 - Kernel Version:
AK.070.XGENESIS.MAKO anarkia1976
- drivers: input: 2w: fix s2s only definitions anarkia1976
- Revert "drivers: input: 2w: rework s2s and now you can use dt2w with this feature" anarkia1976
- Revert "drivers: input: 2w: cleaned s2w_s2sonly
MementoMoriM
14/03/14, 09:45:23
[XGENESIS KERNEL v.080 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller:*ak_unistaller_mako http://ak.hiddenbytes.org/
aosp:*ak.080.xgenesis http://ak.hiddenbytes.org/
cm:*ak.080.xgenesis.cm http://ak.hiddenbytes.org/
[install]
**
- reboot recovery
- flash kernel
- reboot
- install synapse
[uninstall]*
**
- reboot recovery
- flash ak_uninstaller_mako
- flash another kernel
- reboot
**
[short changelog]
kernel:
- linux 3.4.83
- interactive intellidemand tuning
- selinux fixes
- interactive patch
- common patches
- removed some logs and drivers
- mmutils boost
- added sio
- added lmk whitelist support
- fix pop noise with touch during playback
synapse:
- support for backup and restore
- fix typos
- lmk tunable
- lmk whitelist
- entropy
- ecc ecc
ewardofr
14/03/14, 20:54:04
Deberia activar el intelliplug y apagar el me decisión?
Y también activo la zram?
MementoMoriM
14/03/14, 21:23:32
Deberia activar el intelliplug y apagar el me decisión?
Y también activo la zram?
Eso lo mejor prueba por ti mismo jejej
Pero dejalo unos ciclos cómo viene para hacerte una idea de su desempeño [emoji1]
ewardofr
14/03/14, 21:43:01
Eso lo mejor prueba por ti mismo jejej
Pero dejalo unos ciclos cómo viene para hacerte una idea de su desempeño [emoji1]
Cómo lo llevas tú? Jejeje
Ah y otra cosa.
Os ocurre a veces que se os congela la pantalla, por ejemplo, escribiendo en WhatsApp y tarda 10 segundos en volver a responder?
MementoMoriM
14/03/14, 22:46:54
Cómo lo llevas tú? Jejeje
Ah y otra cosa.
Os ocurre a veces que se os congela la pantalla, por ejemplo, escribiendo en WhatsApp y tarda 10 segundos en volver a responder?
Yo no lo llevo ahora jejej
Pero que te ocurra eso es raro [emoji19]
Prueba hacer un wipe dalvik caché y wipe caché haber si mejora [emoji1]
Sino, nos cuentas [emoji106]
MementoMoriM
30/03/14, 22:50:15
[XGENESIS KERNEL v.093 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller:*ak_unistaller_mako http://ak.hiddenbytes.org/downloads/ak_uninstaller_mako.zip
aosp:*ak.093.xgenesis http://ak.hiddenbytes.org/downloads/AK.093.XGENESIS.MAKO.zip
cm:*ak.093.xgenesis.cm http://ak.hiddenbytes.org/downloads/AK.093.XGENESIS.MAKO.CM.zip
[install]
**
- reboot recovery
- flash kernel
- reboot
- install synapse
[uninstall]*
**
- reboot recovery
- flash ak_uninstaller_mako
- flash another kernel
- reboot
Small changelog:
- new prima 3.2.3185- last linux
- last cm11
- new prima drivers with new implementation -> no more undo zip
- sio
- asoc fixes
- interactive fixes
- intelliactive fixes
- intelliplug fixes
- increase audio gain
- f2fs support
- ksm fixes
- gou conservative policy
- gpu voltages interface
- motorola mem utils
- rcu boost
- ecc ecc
todo:
- add synapse support for gpu policy and gpu voltage interface.
stay tuned.
thanks a lot to all guys that support my work
thanks a lot to all devs
thanks a lot to slim team
Lo veis mejor que Matrix este kernel?
MementoMoriM
30/03/14, 23:22:26
Gracias man, funcionan perfectamente los enlaces que he probado, por lo menos a mí. Queda un poco menos bonito que el programa este, pero por lo menos no te gastas ni un euro. Un saludo.
Es muy configurable y en XDA hablan muy bien de él. Y yo cuando lo he probado nunca me ha decepcionado. Prueba y nos comentas jejej
Saludos!
Voy a ello.
Que color lleváis? Podéis poner una captura, lo veo saturado a tope.
MementoMoriM
31/03/14, 00:04:02
Voy a ello.
Que color lleváis? Podéis poner una captura, lo veo saturado a tope.
En el Trickster Mod pon el perfil Lg y lo verás más claro.
En el Trickster Mod pon el perfil Lg y lo verás más claro.
Así lo pongo y se ve muy oscuro todo,y eso que matrix es saturado, alguna forma de que los colores se vean menos saturados? Por lo demás va rápido como matrix.
Así lo pongo y se ve muy oscuro todo,y eso que matrix es saturado, alguna forma de que los colores se vean menos saturados? Por lo demás va rápido como matrix.
Me respondo, no había aceptado bien en LG, ahora se ve muy bien.
A ver un tiempo con el,y el consumo que da.
MementoMoriM
01/04/14, 00:40:38
[XGENESIS KERNEL v.101 - EXPERIMENTAL]
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako (http://ak.hiddenbytes.org/)
aosp: ak.101.xgenesis (http://ak.hiddenbytes.org/)
cm: ak.101.xgenesis.cm (http://ak.hiddenbytes.org/)
small changelog:
- new prima v.3.2.3.193_caf
- squashed random from faux n5
- squashed ondemand from stratos n4
- ecc ecc ecc
ewardofr
01/04/14, 10:33:45
¿Ha vuelto a introducir los prima?
MementoMoriM
01/04/14, 10:37:38
¿Ha vuelto a introducir los prima?
Sí [emoji1]
El otro día me daban freezes con el experimental 93 que tal este? Estoy con matrix que no cago por eso.. :)
MementoMoriM
01/04/14, 13:05:33
El otro día me daban freezes con el experimental 93 que tal este? Estoy con matrix que no cago por eso.. :)
A mi también me dió esos freezes y asimismo estoy con matrix pero supongo que habrán arreglado esos problemas....
New test kernel changelog:
https://github.com/anarkia1976/AK-xG...Genesis-reborn (https://github.com/anarkia1976/AK-xGenesis/commits/ak-xGenesis-reborn)
Download:
AK.203.EXODUS.MAKO.zip (http://forum.xda-developers.com/attachment.php?attachmentid=2679826&d=1397206647)
Lo llevo desde esta mañana y va bastante fino y sin freezes! :D
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako (http://ak.hiddenbytes.org/)
aosp: ak.205.exodus (http://ak.hiddenbytes.org/)
cm: ak.205.exodus.cm (http://ak.hiddenbytes.org/)
[changelog]
changelog synapse:
- added gpu interface
- added gpu policy conservative/trusted
- added new 2wake/1wake support
- added io support
- added lmk wthitelist
- added link to info and downloads
- ecc ecc ecc
changelog kernel:
- rebased for stability from zero
- merged with linux 3.4.87
- merged with cm11 - last 14/04/2014 source
- merge semaphore 2wake
- ecc ecc see github
pd: Si estais registrados en xda entrar y hacer thanks en este enlace para agradecer el soporte que da de este gran desarollador: http://forum.xda-developers.com/showpost.php?p=51929832&postcount=6178
Pichigonzalo
16/04/14, 11:55:21
Con este kernel se puede conectar un pendrive otg?
Nigthmare
16/04/14, 12:20:11
Lee antes los comentarios que dejas en otros hilos.
MementoMoriM
17/04/14, 15:18:54
[XGENESIS KERNEL v.211 - MILESTONE]
A kernel based on CAF CM branch.
uninstaller: ak_unistaller_mako (http://ak.hiddenbytes.org/)
aosp: ak.211.exodus (http://ak.hiddenbytes.org/)
cm: ak.211.exodus.cm (http://ak.hiddenbytes.org/)
[install]
- reboot recovery
- flash kernel
- reboot
[uninstall]
- reboot recovery
- flash ak_uninstaller_mako
- flash another kernel
- reboot
[changelog]
See Githug (https://github.com/anarkia1976/AK-xGenesis)
Please use thanks button for users that help in the thread.
synapse:
- rework menus
- add otg support
- add touch wake delay support
- add vm and zram support
- add hotplug suppport
- fix typos
- ecc ecc
for kernel see git for now.
thanks a lot.
ak
MementoMoriM
18/04/14, 14:41:38
[XGENESIS KERNEL v.214 - MILESTONE]
A kernel based on CAF CM branch.
aosp: ak.214.exodus (http://www.androidfilehost.com/?fid=23329332407587208)
cm: ak.214.exodus.cm (http://www.androidfilehost.com/?fid=23329332407587209)
small changelog;
- fixed performance regression generate by 2 commits from cm11 repo
- added perfomance commits for scheduler
- new toolchain 4.7.4 a15 2014.04
- merged msm hotplug from myfluxi n5 kernel
- enabled neon
- opt for size
- audio patches
- interactive patches
- ecc ecc ecc
synapse:
- added vibrator intensity control
- tochwake delay control
- otg support
- zram
- ecc ecc
full changelog:
Project name: AK KERNEL
anarkia1976 - Added ak-changelog script
anarkia1976 - Kernel Version: AK.214.EXODUS.MAKO
anarkia1976 - msm: hotplug: two is better than one for cpus
anarkia1976 - ak-mako-build: switch to new toolchain 4.7.4-2014.04.20140418.CR83
anarkia1976 - Kernel Version: AK.213.EXODUS.MAKO
anarkia1976 - msm: hotplug: Cleanup probe function
myfluxi - msm: hotplug: Fix licensing issue
myfluxi - msm: hotplug: Protect load stats routine and cleanup
myfluxi - msm: hotplug: Revert to original thresholds
anarkia1976 - Kernel Version: AK.212.EXODUS.MAKO
Vladimir Davydov - sched: add wait_for_completion_io[_timeout]
Peter Zijlstra - sched: Micro-optimize the smart wake-affine logic
Michael Wang - sched: Implement smarter wake-affine logic
Joe Perches - jiffies conversions: Use compile time constants when possible
Waiman Long - SELinux: Reduce overhead of mls_level_isvalid() function call
Junxiao Bi - writeback: fix race that cause writeback hung
Dave Kleikamp - aio: fs: don't plug the I/O queue in do_io_submit()
Namjae Jeon - writeback: fix writeback cache thrashing
Jan Kara - writeback: Fix occasional slow sync(1)
dorimanx - binfmt_elf.c: use get_random_int() to fix entropy depleting
dorimanx - Always set noatime no diratime on all partitions! I/O Boost! V2
dorimanx - Always set noatime no diratime on all partitions! I/O Boost!
dorimanx - mm: vmscan: when kswapd is awoken due to reclaim by a running task
anarkia1976 - linux: mm: set readahead 256 kb
anarkia1976 - Kernel Version: AK.211.EXODUS.MAKO
anarkia1976 - ak_mako_defconfig: enable KERNEL_MODE_NEON
anarkia1976 - ak_mako_defconfig: configuration optimizations
anarkia1976 - usb: gadget: f_qdss: fix argument to sizeof in strncmp all is the same expression as the second source
anarkia1976 - bluetooth: hci_conn: fix argument to sizeof in memcpy all is the same pointer type
anarkia1976 - Kernel Version: AK.210.EXODUS.MAKO
anarkia1976 - ak_mako_defconfig: switch to OPTIMIZE_FOR_SIZE
anarkia1976 - ak-mako-build: switch to linaro 4.8.3-2014.02.20140217.CR83
Shiv Maliyappanahalli - ASoC: msm: qdsp6v2: Fix buffer overflow in voice driver
Laxminath Kasam - ALSA: core: Fix crash by avoiding appl_ptr crossing 32-bit boundary
Shiv Maliyappanahalli - ASoC: msm: qdsp6v2: Copy frame data based on frame length
Phani Kumar Uppalapati - ALSA: pcm: check for integer overflow during multiplication
Mohammad Johny Shaik - ASoC: msm: qdsp6: Fix pop noise seen with touch tone during playback
Deepa Madiregama - ALSA: usb-audio: Fix the mixer control range limiting issue
anarkia1976 - Kernel Version: AK.208.EXODUS.MAKO
Patrick Cain - cpufreq: cpu-boost: Re-issue boosts above minimum frequency
Viresh Kumar - cpufreq: interactive: Remove unnecessary cpu_online() check
Patrick Cain - cpufreq: interactive: Don't reset sampling down factor at max freq
Patrick Cain - cpufreq: Sync on thread migration optimizations
Shridhar Rasal - cpufreq: interactive: delete timers for GOV_START
anarkia1976 - Kernel Version: AK.207.EXODUS.MAKO
anarkia1976 - Revert "arch: arm: Boost global HZ value from 100 to 200"
anarkia1976 - msm: mpdecision: disabled by default, replaced with msm_hotplug
anarkia1976 - msm: kgsl: make gpu voltage interface sysfs user friendly
myfluxi - msm: hotplug: Consider load instead of frequency for slowest cpu
Greg Kroah-Hartman - Linux 3.4.87
anarkia1976 - Kernel Version: AK.204.EXODUS.MAKO
anarkia1976 - msm: kgsl: conservative: clean boost interface
anarkia1976 - Kernel Version: AK.203.EXODUS.MAKO
julianm87
18/04/14, 15:05:54
bueno chamacos, me paso por aqui, entonces este kernel trae los colores mas opacos que el matrix? mmm... y como les va en mahdi?
y para montar otro kernel despues es necesario ejecutar el " flash ak_uninstaller_mako"??
MementoMoriM
18/04/14, 15:28:19
bueno chamacos, me paso por aqui, entonces este kernel trae los colores mas opacos que el matrix? mmm... y como les va en mahdi?
y para montar otro kernel despues es necesario ejecutar el " flash ak_uninstaller_mako"??
Los colores son más o menos iguales a Matrix, pero los puedes modificar con Trickster Mod u otras apps.
Probar no la he probado aún [emoji11]
Y para desinstalar flasheas el Akuninstaller y metes el nuevo kernel.
Saludos!
Quisiera probar este kernel que no había probado aún pero no va el enlace para descargar el ak_uninstaller por si no me convence. Alguien que pueda poner otro enlace? Gracias
MementoMoriM
18/04/14, 19:10:34
Quisiera probar este kernel que no había probado aún pero no va el enlace para descargar el ak_uninstaller por si no me convence. Alguien que pueda poner otro enlace? Gracias
Aquí te lo dejo https://mega.co.nz/#!9ko1VLJQ!x2W6vBCXWZi2nPh7aEroUG68umAUC-c56LtCG4WfM90
Alguien a probado este kernel con la rom Mahid? Para desinstalar no basta con poner otro encima como siempre?
Alguien a probado este kernel con la rom Mahid? Para desinstalar no basta con poner otro encima como siempre?
Me autocito, acabo de ver os comentarios de atrás y ya lo tengo claro.;-)
Alguien a probado este kernel con la rom Mahid? Para desinstalar no basta con poner otro encima como siempre?
Instalado, voy a cargar a tope y a ver como va el primer ciclo.
De entrada me gustan los colores que trae por defecto, oscuros.
He bajado la mínima a 81 que viene a 384 y activado despertar al tocar.
Yo lo e puesto hace unas horas y me gusta mucho,parece más fluido que hells y muy buen consumo
Yo lo e puesto hace unas horas y me gusta mucho,parece más fluido que hells y muy buen consumo
Como lo llevas configurado? Has tocado algo o lo has dejado como viene?
Como lo llevas configurado? Has tocado algo o lo has dejado como viene?
De momento como viene, no suelo tocar nada de los kernel, como biene se supone es como debe rendir mejor, lo he puesto con ART Y Mahid, mañana ciclo completo y aver que nos depara...Parece muy bueno,:oh:
Me está gustando este kernel. Se va a poner de los primeros de mi lista.
http://img.tapatalk.com/d/14/04/19/hy7y4a6e.jpg
http://img.tapatalk.com/d/14/04/19/azazu3un.jpg
3mundista
21/04/14, 10:41:27
De donde me puedo bajar el desinstalador que del enlace del primer post no me deja, el kernel si que e podido desde xda
alexret
21/04/14, 10:42:38
De donde me puedo bajar el desinstalador que del enlace del primer post no me deja, el kernel si que e podido desde xda
http://www.htcmania.com/showpost.php?p=13353479&postcount=321 Lo tenías en el primer mensaje de esta página.
3mundista
21/04/14, 10:44:46
http://www.htcmania.com/showpost.php?p=13353479&postcount=321 Lo tenías en el primer mensaje de esta página.
Tienes más razón que un santo, lo estaba buscando por el principio. Gracias
julianm87
22/04/14, 14:03:02
amigos, osea que este kernel por default trae OC en el GPU? eso logro ver en las caracteristicas.. le tengo miedo a esa weba..la verdad juego mucho en el movil y me da como temor freirlo.. que me recomiendan, lo pongo sin miedo o que podria ocurrir?
MementoMoriM
24/04/14, 15:36:31
[XGENESIS KERNEL v.219 - MILESTONE]
A kernel based on CAF CM branch.
aosp: ak.219.exodus (http://www.androidfilehost.com/?fid=23329332407588772)
cm: ak.219.exodus.cm (http://www.androidfilehost.com/?fid=23329332407588774)
synapse:
- some fixes
- added hotplug new features
- tcp
- ecc ecc
kernel:
- see git
MementoMoriM
26/04/14, 00:02:37
[XGENESIS KERNEL v.223 - MILESTONE]
A kernel based on CAF CM branch.
aosp: ak.223.exodus (http://www.androidfilehost.com/?fid=23329332407589161)
cm: ak.223.exodus.cm (http://www.androidfilehost.com/?fid=23329332407589162)
changelog:
- backport sema ondemand with some others patches
- some fixes for hotplug
- random patches
- new default scheduler tripndroid
- ecc ecc
synapse:
- small fixes
please rate thread and press thanks button.
ak
MementoMoriM
27/04/14, 11:23:04
[XGENESIS KERNEL v.227 - MILESTONE]
A kernel based on CAF CM branch.
aosp: ak.227.exodus (https://www.androidfilehost.com/?w=files&flid=13929)
cm: ak.227.exodus.cm (https://www.androidfilehost.com/?w=files&flid=13929)
changelog:
see git
waiting for battery feedback!
MementoMoriM
27/04/14, 15:35:36
http://img.tapatalk.com/d/14/04/27/yhuvu7ag.jpg
http://img.tapatalk.com/d/14/04/27/yqeha7en.jpg
http://img.tapatalk.com/d/14/04/27/ebuqu3a2.jpg
http://img.tapatalk.com/d/14/04/27/a3ugyzyj.jpg
http://img.tapatalk.com/d/14/04/27/asagydy5.jpg
MementoMoriM
27/04/14, 22:06:41
Haber que tal el nuevo Ak con la Mahdi [emoji41], que es la ROM que tiene ahora anarkia1976.....
http://img.tapatalk.com/d/14/04/28/e3ytehug.jpg
adrianedu
28/04/14, 00:14:49
Haber que tal el nuevo Ak con la Mahdi [emoji41], que es la ROM que tiene ahora anarkia1976.....
http://img.tapatalk.com/d/14/04/28/e3ytehug.jpg
Yo lo lleve varios días con la mahdi y de verdad que la rom que de por si es buena, con este kernel se mueve mucho mejor, solo lo quite por que el consumo es mayor y el kernel stock es muy bueno pero con eso que dices de que el propio anarkia esta usando la rom mahdi, me lo voy a instalar en esta ultima versión de la rom ya que siempre ha sido mi rom favorita y bueno, vamos a ver si el consumo mejora un poco en esta nueva versión del kernel :grin:
MementoMoriM
28/04/14, 00:17:48
Yo lo lleve varios días con la mahdi y de verdad que la rom que de por si es buena, con este kernel se mueve mucho mejor, solo lo quite por que el consumo es mayor y el kernel stock es muy bueno pero con eso que dices de que el propio anarkia esta usando la rom mahdi, me lo voy a instalar en esta ultima versión de la rom ya que siempre ha sido mi rom favorita y bueno, vamos a ver si el consumo mejora un poco en esta nueva versión del kernel :grin:
Eso espero yo que los consumos sean igual o mejores jejej
Por ahora se mueve muy fluida .... veremos los consumos [emoji1]
adrianedu
28/04/14, 00:23:49
Eso espero yo que los consumos sean igual o mejores jejej
Por ahora se mueve muy fluida .... veremos los consumos [emoji1]
Ya flasheado, se tarda un poco en iniciar la primera vez por que como ando probando el art, siempre se demora al momento de cambiar de kernel.
Otra cosa que me gusta de este kernel que a la mayoría no, son los colores jeje, debe ser por que me encanta lo oscuro o todo lo que tenga que ver con lo dark :sisi1: :grin:
adrianedu
28/04/14, 00:30:13
Listo! Como siempre gana mucha más fluidez la rom xD ojalá tenga mejor consumo.http://img.tapatalk.com/d/14/04/28/e2uhe4yn.jpg
MementoMoriM
28/04/14, 00:35:33
Ya flasheado, se tarda un poco en iniciar la primera vez por que como ando probando el art, siempre se demora al momento de cambiar de kernel.
Otra cosa que me gusta de este kernel que a la mayoría no, son los colores jeje, debe ser por que me encanta lo oscuro o todo lo que tenga que ver con lo dark :sisi1: :grin:
Ya es lo malo del ART al meter un nuevo kernel, o hacer los dos wipes , o reiniciarse sin wipes tarda más qué con dalvik....
Yo tenia puesto el ak del viernes le he puesto la versión de ayer y me ha tardado en reiniciar cero coma, lo mismo que siempre, con ART.
MementoMoriM
28/04/14, 11:33:10
Yo tenia puesto el ak del viernes le he puesto la versión de ayer y me ha tardado en reiniciar cero coma, lo mismo que siempre, con ART.
Pues yo lo que he escrito es que con ART tarda más el reinicio y etc que con dalvik [emoji11]
Pues yo lo que he escrito es que con ART tarda más el reinicio y etc que con dalvik [emoji11]
Que raro memen, no he notado que me demore mas el reinicio en Art te pasa solo con AK?
MementoMoriM
28/04/14, 12:57:23
Que raro memen, no he notado que me demore mas el reinicio en Art te pasa solo con AK?
No, también me ocurría con el stock de la Mahdi .... no es preocupante pero la demora del reinicio con wipes o sin ellos si se nota con respecto a dalvik.
ivan2345s
28/04/14, 16:20:27
[XGENESIS KERNEL v.227 - MILESTONE]
A kernel based on CAF CM branch.
aosp: ak.227.exodus (https://www.androidfilehost.com/?w=files&flid=13929)
cm: ak.227.exodus.cm (https://www.androidfilehost.com/?w=files&flid=13929)
changelog:
see git
waiting for battery feedback!
acabo de instalar la version cm a ver que tal va con la rom beanstalk
ivan2345s
02/05/14, 11:09:20
desde ayer me esta pasando unas cosas un poco raras, al blokear el telefono se reinicia aveces con este kernel y la rom beanstalk
MementoMoriM
04/05/14, 21:25:09
[XGENESIS KERNEL v.232]
A kernel based on CAF CM branch.
aosp: ak.232.exodus (https://www.androidfilehost.com/?w=files&flid=13929)
cm: ak.232.exodus.cm (https://www.androidfilehost.com/?w=files&flid=13929)
changelog:
see git.
MementoMoriM
08/05/14, 14:57:44
[XGENESIS KERNEL v.237]
A kernel based on CAF CM branch.
aosp: AK.237.EXODUS (http://ak.hiddenbytes.org/)
cm: AK.237.EXODUS.CM (http://ak.hiddenbytes.org/)
Thanks a lot
to all devs on xda
changelog:
- see git
small changelog:
- synapse revamped
thanks a lot to @apb_axel (http://forum.xda-developers.com/member.php?u=5658634)
- added stock ondemand
- added semaphore lcd backlight control
- ecc ecc
MementoMoriM
12/05/14, 15:26:56
[XGENESIS KERNEL v.241]
A kernel based on CAF CM branch.
aosp: AK.241.EXODUS (http://ak.hiddenbytes.org/)
cm: AK.241.EXODUS.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash kernel
- reboot
- install synapse
- enjoy ak
- finish
changelog:
- synapse addictions + new hotplug tunable + sched mc + ecc ...
- fixed selinux
- merged myfluxi interactive + hotplug
- topology fixes
- ecc ecc ecc
see git for changelog.
perezagua8
12/05/14, 15:48:03
Que es lo de synapse?
MementoMoriM
12/05/14, 15:50:02
Que es lo de synapse?
Una aplicación de control del kernel https://play.google.com/store/apps/details?id=com.af.synapse
Funciona de coña y gratis, yo ya ni uso el tristeck mod desde hace tiempo y el kernel esta optimizado para usar con el synapse.
Eskorbutin
20/05/14, 22:35:57
Ya esta disponible la v243
http://ak.hiddenbytes.org
MementoMoriM
21/05/14, 02:43:07
[XGENESIS KERNEL v.243]
A kernel based on CAF CM branch.
aosp: AK.254.EXODUS (http://ak.hiddenbytes.org/)
cm: AK.254.EXODUS.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash kernel
- reboot
- install synapse
- enjoy ak
- finish
changelog:
- linux 3.4.91
- new toolchain 4.9
- linaro fixes
- bfqv4
- interactive tuning
- hotplug fixes
- topology fixes
- ecc
synapse merged with last n4ukm.
see git.
overhtc
22/05/14, 23:30:18
AK.255.EXODUS (http://ak.hiddenbytes.org/downloads/AK.255.EXODUS.MAKO.zip)
AK.255.EXODUS.CM (http://ak.hiddenbytes.org/downloads/AK.255.EXODUS.MAKO.CM.zip)
overhtc
26/05/14, 08:54:42
aosp: AK.258.EXODUS (http://ak.hiddenbytes.org/downloads/AK.258.EXODUS.MAKO.zip)
cm: AK.258.EXODUS.CM (http://ak.hiddenbytes.org/downloads/AK.258.EXODUS.MAKO.CM.zip)
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last n4ukm_v1.x.x.zip (http://www.androidfilehost.com/?fid=23487008491966454)
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
Changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.258.EXODUS.MAKO
anarkia1976 - ak_mako_defconfig: enable GRAPHITE_OPTIMIZATION
anarkia1976 - makefile: nf_conntrack_core: fix compile error with graphite optimizations
anarkia1976 - makefile: fix graphite flags syntax error
anarkia1976 - makefile: add graphite flags opt
anarkia1976 - makefile: add new flag -fgcse-las - part 2
anarkia1976 - makefile: add new flag -fgcse-las
anarkia1976 - Kernel Version: AK.257.EXODUS.MAKO
anarkia1976 - Revert "msm: thermal: Update to speed up bootup time"
anarkia1976 - Revert "fair.c: tweaking the scheduling"
anarkia1976 - Kernel Version: AK.256.EXODUS.MAKO
Joonsoo Kim - sl[aou]b: merged with linux 3.8.x kernel
Stratos Karafotis - power: pm8921: Change info message to debug
ramgear - fair.c: tweaking the scheduling
faux123 - devices-8064: double watchdog timeout from 10 to 20
anarkia1976 - timer: optimize apply_slack()
anarkia1976 - tty/Makefile: Remove smux_debug
ramgear - readahead: optimize divide/multiply by power of 2 using L/R shift - Fix
ramgear - readahead: optimize divide/multiply by power of 2 using L/R shift
FlyFrog - int_sqrt: Improve 3x faster integer sqrt.
ramgear - int_sqrt.c: Correction square root algo with naming
FlyFrog - mach-msm: Remove smd debugging
FlyFrog - tty: remove smux debugging
anarkia1976 - linux: mm: set readahead 1792 kb, 32 kb
anarkia1976 - ak_mako_defconfig: set default ONDEMAND
slipknot30
26/05/14, 12:42:04
Yo no se por que ni este ni franco me terminan de ir bien , este me calienta el movil que da gusto y franco se cepilla la bateria en 0,
Eskorbutin
26/05/14, 13:29:44
Con este le puedes bajar el limite de temperatura, yo se lo dejo en 55 y por lo menos no me quema las manos ;) tengo que decir que a mi, este, me va bastante bien
Nigthmare
26/05/14, 15:21:54
Por mucho que modifiques el kernel con apps,solo utiliza dos nucleos...
Vuelta a helldoctor.
Una lastima porque me encanta sus kernels
Eskorbutin
26/05/14, 17:43:56
Por mucho que modifiques el kernel con apps,solo utiliza dos nucleos...
Vuelta a helldoctor.
Una lastima porque me encanta sus kernels
Usaste synapse y el zip N4UKM?
Nigthmare
26/05/14, 18:01:35
Si.todo a rajatabla.
Tengo un monitor de carga de cpu,por nucleos independientes y solo hay actividad en el 1ro y 2do.los demas no hay actividad alguna
Eskorbutin
26/05/14, 19:46:13
Es extraño...
Nigthmare
26/05/14, 20:38:48
Si.he vuelto a flashear y nada.
La app se llama cpumonitor micro.
Simplemente sale un cuadrado en la esquina que elijas y ves el nivel de carga.
Nigthmare
26/05/14, 23:25:35
Flasheado todo de nuevo ,antes de nada pasar el limpiador de kernel y todo OK
MementoMoriM
30/05/14, 11:20:16
[XGENESIS KERNEL v.268]
A kernel based on CAF CM branch.
aosp: AK.268.EXODUS (http://ak.hiddenbytes.org/)
cm: AK.268.EXODUS.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM (http://forum.xda-developers.com/nexus-4/general/zip-synapse-script-n4-universal-kernel-t2736986)
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.268.EXODUS.MAKO
anarkia1976 - ak_mako_defconfig: set max 1728Mhz and fck the battery
anarkia1976 - msm: hotplug: min 2, bl 2500, dl 500
anarkia1976 - Kernel Version: AK.267.EXODUS.MAKO
Archana Sathyakumar - cpufreq: Resolve CPUFREQ_NOTIFY issue
Steve Kondik - debug: remove: arm unwind: remove logspam while in debug mode
ktoonsez - debug: remove: remove some dmesg logspam from Linux mainline 3.4 fs
poondog - msm: slimbus: some more tweaks and added new freqs
anarkia1976 - Revert "cpufreq: Break out early if freq equals to target_freq"
anarkia1976 - Revert "cpufreq: Initial CPU utilization should be 0"
anarkia1976 - msm: hotplug: merged with latest Dorimanx/Alucard24/Neobuddy89 git
anarkia1976 - Kernel Version: AK.265.EXODUS.MAKO
myfluxi - msm: acpuclock-krait: Disable vdd core boost
anarkia1976 - msm: hotplug: merged with Dorimanx git, now we have worldwide compatibility
anarkia1976 - Kernel Version: AK.264.EXODUS.MAKO
myfluxi - msm: hotplug: Remove the redundant iowait check
Anji Jonnala - soc: qcom: rq_stats: remove the redundant iowait check
anarkia1976 - Kernel Version: AK.263.EXODUS.MAKO
anarkia1976 - cpufreq: smartmax: merged with latest version - thanks @maxwen
anarkia1976 - cpufreq: smartmax: added new governor based on ondemand and smartass2
Francisco Franco - block: cfq: merge tweaked tunables.
anarkia1976 - Kernel Version: AK.262.EXODUS.MAKO
poondog - msm: slimbus: enhancements mkII
barome - msm: slimbus: Optimize overclocking of master component
Tk-Glitch - msm: slimbus: initial overclocking of slimbus
anarkia1976 - ak_mako_defconfig: enable SLIMBUS_MSM_NGD
Kiran Gunda - Slim_ngd: Modify waiting mechanism in kthread
Sagar Dharia - slimbus: Use physical address type where physical address is used
Sagar Dharia - slimbus: Enable clients to send user messages to devices.
Sagar Dharia - slim_ngd: Handle error flags before handling SENT flag
Kiran Gunda - Slimbus: Correct the conditional check during channel removal
Sagar Dharia - slim_msm: Get platform-specific information from platform-data
Sagar Dharia - slim_msm: Signal client's completion for per transfer notification
Sagar Dharia - slim_msm: Report flow-error and mask apps slimbus port interrupts
Kiran Gunda - slim_ngd: Add NULL pointer check apart from error check
Kiran Gunda - slim-ngd: NULL pointer check for client buffer
Ajay Dudani - slim_ngd: Make sure transaction is not dereferenced after it's freed
Sagar Dharia - slim_ngd: Support reserving message bandwidth for clients
Sagar Dharia - slimbus: Handle channel control correctly if controller manages BW
Kiran Gunda - slim_msm: Reading the smaller length messages properly
Sagar Dharia - slimbus: Add slimbus device driver unregistration function
Sagar Dharia - slimbus: Refine scope of controller and scheduler mutex locks
Sagar Dharia - slim_ngd: Rectify define, removal messages per protocol
Sagar Dharia - slimbus: Populate slimbus device's logical address during assignment
Sagar Dharia - slimbus: Specify number of channels for the group in group handle
Stephen Boyd - slim_msm: Fix unsafe locking in msm_sat_enqueue()
poondog - slimbus: remove this too
poondog - slilmbus: remove some functions that are incompatible with the current setup we do not have the same qdsp6v2 files as the hammerhead so this will not work
Sagar Dharia - slim_ngd: Slimbus satellite controller driver
Kiran Gunda - slimbus: Avoid same channel definition, removal in same sequence
Sagar Dharia - slim_msm: Allow remote management of pipes for MSM slimbus BAM
Sagar Dharia - slimbus: Allow controller to specify logical addresses
Sagar Dharia - slimbus: Allow controller to override default scheduling algorithm
Sagar Dharia - slim_msm: Move out common functionality from MSM controller driver
Sagar Dharia - slim_msm: Satellite channel should not be deallocated more than once
Sagar Dharia - slim_msm: Retry initial sequence messages
Sagar Dharia - slimbus: Clear slimbus read transaction if synchronous read fails
Sagar Dharia - slimbus: Decrement channel reference during reconfigure now
Sagar Dharia - slim_msm: Keep track of satellite reconfiguring a channel
Joonwoo Park - slimbus: Defer probing slimbus until ADSP is ready
Sagar Dharia - slimbus: Add slave devices to controller after controller HW is up
Sagar Dharia - slim: msm: Control interface clock if it's specified
Sagar Dharia - slimbus: Callback to indicate device report present message
Sagar Dharia - slimbus: Fix channel concurrent usage during reconfiguration sequence
Sagar Dharia - slim:msm: Change to register access for RX path if required
Sagar Dharia - slimbus: Export clock pause function
Sagar Dharia - slimbus: Disconnect source port if source end is removed by client
Sagar Dharia - slimbus: Modify check for empty slots
anarkia1976 - ak_mako_defconfig: default CFQ
David Brown - slimbus: Add Qualcomm Slimbus driver
anarkia1976 - msm: slimbus: remove default drivers
anarkia1976 - gitignore: ignore .log files
anarkia1976 - Kernel Version: AK.261.EXODUS.MAKO
anarkia1976 - msm: gpu: add optimization flags to GPU drivers
anarkia1976 - msm: thermal: cleaned unused code
myfluxi - msm: hotplug: On- and offline cpus only when enabled
anarkia1976 - Revert "ak_mako_defconfig: disable MSM_RUN_QUEUE_STATS"
myfluxi - msm: rq_stats: Disable hotplug and stats by default
anarkia1976 - Kernel Version: AK.260.EXODUS.MAKO
anarkia1976 - ak_mako_defconfig: disable GRAPHITE_OPTIMIZATION
Anirudh Ghayal - thermal: pm8xxx-tm: Turn off the temperature alarm during shutdown
Siddartha Mohanadoss - thermal: tsens8960: Increase the polling rate
myfluxi - msm: thermal: use thermal control from @myfluxy n4 kernel
anarkia1976 - linux: mm: set readahead 128kb, 16kb
anarkia1976 - Revert "msm thermal: enhancements"
anarkia1976 - Revert "driver: thermal: +10 over default settings"
Ruchi Kandoi - nf: IDLETIMER: time-stamp and suspend/resume handling.
Matt Wagantall - ARM: Don't dump vmalloc addresses with show_data()
Stratos Karafotis - cpufreq: Initial CPU utilization should be 0
Stratos Karafotis - cpufreq: Break out early if freq equals to target_freq
Paolo Pisati - regulator: core: if voltage scaling fails, restore original voltage values
anarkia1976 - ak_mako_defconfig: disable STACKTRACE and TRACING
anarkia1976 - cpufreq: stockdemand: sync_freq = 702000 + optimal_freq = 1350000
press thanks and rate thread.
overhtc
05/06/14, 09:49:05
New kernel 4.4.3 merged with google source:
AK.280.EXODUS.MAKO.zip (http://forum.xda-developers.com/attachment.php?attachmentid=2781447&d=1401944073)
Nueva version test para roms 4.4.3 version CM
AK.301.POSEIDON.MAKO.CM.zip (http://forum.xda-developers.com/attachment.php?attachmentid=2785382&d=1402141841)
merged with cm, aosp and fixed hotplug fastlane.
Eskorbutin
07/06/14, 23:26:18
[QUOTE=ak;53235959] [ONLY FOR 4.4.3 - KERNEL v.300]
A kernel based on CAF CM branch.
aosp: AK.300.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.300.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM (http://forum.xda-developers.com/nexus-4/general/zip-synapse-script-n4-universal-kernel-t2736986)
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
small changelog:
- merged all from 4.4.3 branch
- merged all from CM branch
- conservative fixes
- alot fixes to hotplug
- update to new prima: release v3.2.3.19
- wifi speed fix
- remove sleepers, now all integrated into hotplug
- fix here and here
- ecc ecc
full changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.301.POSEIDON.MAKO.CM
Mayank Chopra - msm_fb: display: Add support to YCBYCR MDP format
Mayank Chopra - msm: rotator: Add support to YCBYCR rotator format
anarkia1976 - prima: core: change path for WCNSS_qcom_cfg.ini
anarkia1976 - msm: hotplug: revert fastlane min frequency
anarkia1976 - net: xt_IDLETIMER: fix now unused var
Thomas Gleixner - futex: Make lookup_pi_state more robust
Thomas Gleixner - futex: Always cleanup owner tid in unlock_pi
Thomas Gleixner - futex: Validate atomic acquisition in futex_lock_pi_atomic()
Thomas Gleixner - futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1)
Michal Pecio - cpufreq: conservative: update frequency when limits are relaxed
Amit Daniel Kachhap - PM / cpufreq: Initialise the cpu field during conservative governor start
tzuhsuan_chen - deb: mdm: Implement RESET_CHARM in the ioctl function.
anarkia1976 - msm: hotplug: correct fast lane function condition checks. code style
anarkia1976 - Kernel Version: AK.280.KTU.MAKO
anarkia1976 - prima: release v3.2.3.19
anarkia1976 - Kernel Version: AK.280.EXODUS.MAKO
Patrick Tjin - Revert "mako: touch: PLG137 firmware E044 update"
Jongrak Kwon - Revert "mako: touch: add error checking for reading descriptor"
Prakash Kamliya - sync: signal pt before sync_timeline object gets destroyed
Alistair Strachan - sync: Fix a race condition between release_obj and print_obj
Laura Abbott - staging: android: ashmem: Avoid deadlock with mmap/shrink
Ed Tam - prima: release v3.2.3.18
Ed Tam - prima: release v3.2.3.16
mrg666 - cfg80211: add flags to define country IE processing rules
Jongrak Kwon - mako: touch: add error checking for reading descriptor
Jongrak Kwon - mako: touch: fix i2c error after firmware upgrade
JP Abgrall - tcp: add a sysctl to config the tcp_default_init_rwnd
JP Abgrall - mako_defconfig: enable IDLETIMER target for netfilters
Ashish Sharma - android: configs: Add CONFIG_NETFILTER_XT_TARGET_IDLETIMER
anarkia1976 - ak_mako_defconfig: enable XT_TARGET_IDLETIMER
JP Abgrall - mako_defconfig: canonicalize the defconfig with make savedefconfig
JP Abgrall - android: configs: Grab the android/configs from kernel/common
Devin Kim - fs/dcache.c: Fix the too small buffer for dname
anarkia1976 - seq_file: always clear m->count when we free m->buf
Devin Kim - seq_file: always update file->f_pos in seq_lseek()
Jongrak Kwon - mako: touch: PLG137 firmware E044 update
anarkia1976 - Kernel Version: AK.273.EXODUS.MAKO
Xi Wang - ipv4: fix NULL checking in devinet_ioctl()
anarkia1976 - Revert "prima: core: change path for WCNSS_qcom_cfg.ini"
myfluxi - msm: hotplug: Add io_is_busy interface
anarkia1976 - Kernel Version: AK.272.EXODUS.MAKO
anarkia1976 - msm: hotplug: switch from DEFAULT_MAX_CPUS_ONLINE to stats.total_cpus
anarkia1976 - cpufreq: ondemand: convert cputime64 into u64
anarkia1976 - cpufreq: stats: convert cputime64 into u64
anarkia1976 - msm: kconfig: fix freqs definitions
anarkia1976 - Kernel Version: AK.271.EXODUS.MAKO
Fengguang Wu - readahead: make context readahead more conservative
Viresh Kumar - sched: Fix memory leakage in build_sched_groups()
anarkia1976 - msm: hotplug: Update default fast_lane_load
myfluxi - msm: rq_stats: Use u64 for variables, arguments and return vals
Lorenzo Colitti - net: support marking accepting TCP sockets
mrg666 - net: ipv6: autoconf routes into per-device tables
Lorenzo Colitti - net: ipv6: ping: Use socket mark in routing lookup
mrg666 - net: add a sysctl to reflect the fwmark on replies
dorimanx - msm: hotplug: Code style fix by neobuddy89
myfluxi - msm: acpuclock-krait: Disable vdd core boost
anarkia1976 - Kernel Version: AK.270.EXODUS.MAKO
anarkia1976 - msm: hotplug: Add fast_lane_min_freq value
Pranav Vashi - Revert "msm: hotplug: Try conservative load scale"
Jan Kara - jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()
Pranav Vashi - msm: hotplug: Use correct variable type
anarkia1976 - Revert "msm: cpufreq: sysfs for max screen off frequency - default 1026MHz"
anarkia1976 - Revert "msm: cpufreq: set max freq off to 702Mhz"
anarkia1976 - Revert "msm: cpufreq: fix sysfs for max screen off"
anarkia1976 - Revert "ak_mako_defconfig: enable MSM_SLEEPER"
anarkia1976 - Revert "msm: sleeper: shutup some logs"
anarkia1976 - msm: hotplug: merged with latest N5 chaos kernel
Xiaogang Cui - msm: cpufreq: Add msm_cpufreq debugfs file to show CPU -> L2/BW mapping
Chris Fries - msm: acpuclock-krait: Init to max speed
anarkia1976 - cpufreq: cpu-boost: Fix cores getting stuck
Theodore Ts'o - ext4: make sure the journal sb is written in ext4_clear_journal_err()
anarkia1976 - Revert "msm: acpuclock-krait: Disable vdd core boost"[FONT=Century Gothic][SIZE=2][FONT=Century Gothic][SIZE=2][COLOR=Red][FONT=Century Gothic][COLOR=Black][SIZE=2]
MementoMoriM
08/06/14, 11:54:28
Edit
Estoy probando la versión 301, y va realmente bien este kernel.
Con el synapsr además se puede habilitar despertar la pantalla con 2 toques.
Es ágil al estilo Franco.
Como acabo de meterlo no puedo hablar de consumos
adrianedu
08/06/14, 15:35:10
Estoy probando la versión 301, y va realmente bien este kernel.
Con el synapsr además se puede habilitar despertar la pantalla con 2 toques.
Es ágil al estilo Franco.
Como acabo de meterlo no puedo hablar de consumos
Yo lo tuve ayer con liquid y va de escándalo pero un poco Tragón como de costumbre.
MementoMoriM
08/06/14, 15:35:24
Estoy probando la versión 301, y va realmente bien este kernel.
Con el synapsr además se puede habilitar despertar la pantalla con 2 toques.
Es ágil al estilo Franco.
Como acabo de meterlo no puedo hablar de consumos
Me estás tentando jejej
¿Cómo has metido el kernel?
adrianedu
08/06/14, 15:40:34
Me estás tentando jejej
¿Cómo has metido el kernel?
Hay que hacer tal cual lo dice el dev y todo molara de vicio:
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
Llevo la Rom CM11 crDroiid, asi que le metí el kernel AK 301 Poseidón CM con wipes dalvik y caché.
Después flasheé el UKM v2.3 sin ningún wipe
Y finalmente instalé el synapse
MementoMoriM
08/06/14, 15:42:55
Hay que hacer tal cual lo dice el dev y todo molara de vicio:
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
Flasheaste la ROM antes ( como pone primero flash stock kernel of your ROM...) y luego ya el ak y ukm?
adrianedu
08/06/14, 15:49:37
Flasheaste la ROM antes ( como pone primero flash stock kernel of your ROM...) y luego ya el ak y ukm?
si compi, lo hice con la luquid de ayer y te digo que el kernel es pura telita de la buena pero es como franco en el sentido de que te brinda un rendimiento optimo pero te sacrifica un poco la bateria.
MementoMoriM
08/06/14, 16:07:23
Metido ya y funcionando muy fluido.... ya pondré capturas de consumos [emoji11]
http://img.tapatalk.com/d/14/06/08/age3ugez.jpg
adrianedu
08/06/14, 16:16:41
Metido ya y funcionando muy fluido.... ya pondré capturas de consumos [emoji11]
http://img.tapatalk.com/d/14/06/08/age3ugez.jpg
yo le baje la frecuencia máxima del cpu ya que por defecto viene en 1728MHz.
adrianedu
08/06/14, 16:22:59
Este kernel es pura telita, vamos a ver como te va con los consumos @ozil xDhttp://img.tapatalk.com/d/14/06/08/qa3edysa.jpg
portal47
08/06/14, 20:29:18
si quiero volver al kernel de cyanogenmod, con actualizar a la siguiente nightly se puede?
si quiero volver al kernel de cyanogenmod, con actualizar a la siguiente nightly se puede?
Si , flaseando la cyanogenmod vuelves al kernel original
MementoMoriM
10/06/14, 16:13:55
Aceptables consumos con AK con Mahdi, aunque podrían mejorar de no ser del maldito systemui....
http://img.tapatalk.com/d/14/06/10/9u7y7yqe.jpg
http://img.tapatalk.com/d/14/06/10/yravapa9.jpg
http://img.tapatalk.com/d/14/06/10/yhene6ad.jpg
http://img.tapatalk.com/d/14/06/10/ave5eva8.jpg
MementoMoriM
11/06/14, 00:52:58
Me está gustando éste AK ,y se está estabilizando el systemui marcando el modo bolsillo y desmarcandolo que la Mahdi me estaba dando problemas en su actualización a 4.4.3 , mañana pondré capturas y espero que se confirme la mejoría [emoji11]
slipknot30
11/06/14, 03:17:12
Me está gustando éste AK ,y se está estabilizando el systemui marcando el modo bolsillo y desmarcandolo que la Mahdi me estaba dando problemas en su actualización a 4.4.3 , mañana pondré capturas y espero que se confirme la mejoría [emoji11]
Aunque el systemui de porcentajes tan altos al tener el modo bolsillo el consumo de batería real no es tanto como parece lo digo por experiencia aunque si pone nervioso ver esos porcentajes
adrianedu
11/06/14, 03:55:18
Me está gustando éste AK ,y se está estabilizando el systemui marcando el modo bolsillo y desmarcandolo que la Mahdi me estaba dando problemas en su actualización a 4.4.3 , mañana pondré capturas y espero que se confirme la mejoría [emoji11]
Aunque el systemui de porcentajes tan altos al tener el modo bolsillo el consumo de batería real no es tanto como parece lo digo por experiencia aunque si pone nervioso ver esos porcentajes
Este ak con la liquid va dpm... Es un pedazo de kernel éste
slipknot30
11/06/14, 04:04:09
Este ak con la liquid va dpm... Es un pedazo de kernel éste
A mi no se porque pero no le sienta bien y se calienta mucho
adrianedu
11/06/14, 04:07:41
A mi no se porque pero no le sienta bien y se calienta mucho
A mi no se me calentaba sino era que consumía más que el kernel de serie, pero es un muy buen kernel. Quiero es que terminen de sacar el matrix
A mi no se porque pero no le sienta bien y se calienta mucho
El tiempo también cuenta slipk, empieza a hacer calorcita y depende donde estés como toquetees mucho el móvil se pone ardiendo indiferentemente del kernel que lleves por lo menos a mi.. :)
slipknot30
11/06/14, 07:43:40
El tiempo también cuenta slipk, empieza a hacer calorcita y depende donde estés como toquetees mucho el móvil se pone ardiendo indiferentemente del kernel que lleves por lo menos a mi.. :)
Yo no suelo tocar nada de los kernel
Me refería al móvil en general, ayer yo para almorzar entre al face y escribí un rato por whats con la líquid y kernel stock y podía hacer un huevo frito encima.. Xd
MementoMoriM
11/06/14, 11:34:11
Ya va mucho mejor el systemui [emoji41]
http://img.tapatalk.com/d/14/06/11/2a5ugyhy.jpg
Pau Tatan
11/06/14, 11:52:33
Ya va mucho mejor el systemui [emoji41]
http://img.tapatalk.com/d/14/06/11/2a5ugyhy.jpg
Estás usando S2W/S2S o TouchControl?
Modo bolsillo activado?
Thanks!
MementoMoriM
11/06/14, 11:54:50
Estás usando S2W/S2S o TouchControl?
Modo bolsillo activado?
Thanks!
Ninguna de las dos cosas .
Saludos!
Memento llevo la c-rom y ayer me daba fc el systemui, cambie las gapps y le metí el último AK y también me sale alto el consumo..a que puede ser debido?
http://img.tapatalk.com/d/14/06/11/yvyjera9.jpg
slipknot30
11/06/14, 12:01:04
Memento llevo la c-rom y ayer me daba fc el systemui, cambie las gapps y le metí el último AK y también me sale alto el consumo..a que puede ser debido?
http://img.tapatalk.com/d/14/06/11/yvyjera9.jpg
Prueba GTA , no te arepentiras
MementoMoriM
11/06/14, 12:01:57
Memento llevo la c-rom y ayer me daba fc el systemui, cambie las gapps y le metí el último AK y también me sale alto el consumo..a que puede ser debido?
http://img.tapatalk.com/d/14/06/11/yvyjera9.jpg
Pues un compa del foro(txuki2005) me dijo que marcará y desmarcará el modo bolsillo del lockscreennotification, y asimismo marcará y desmarcará el peek. Y por ahora ha mejorado bastante el systemui [emoji41]
Saludos!
Slipk ya sabes que estoy enamorado del Ak y sus opciones de sonido y gamma con el synapse es de lo mejorcito que hay.. A mi llegandome al día me vale y si no me llevó el cargador en el bolsillo.. XD
Memen ya he hecho lo mismo a ver si me baja el consumo de systemui
MementoMoriM
12/06/14, 00:36:54
Consumos de AK301 con Mahdi ROM😁
http://img.tapatalk.com/d/14/06/12/u4upu9yn.jpg
http://img.tapatalk.com/d/14/06/12/budadevu.jpg
http://img.tapatalk.com/d/14/06/12/daragu5e.jpg
Ya no tengo consumos de systemui y por la noche es un mechero me ha consumido 2%, que pasada de kernel como siempre AK se sale! :D
http://img.tapatalk.com/d/14/06/12/bagutegy.jpg
slipknot30
12/06/14, 09:47:18
Ya no tengo consumos de systemui y por la noche es un mechero me ha consumido 2%, que pasada de kernel como siempre AK se sale! :D
http://img.tapatalk.com/d/14/06/12/bagutegy.jpg
Yo no se como lo harás para tener esos consumos con este kernel
Smartmax/Row 384/1512 brillo automático nada del otro mundo Slipk y en reposo de consumo he probado muchos y nadie le hace sombra
MementoMoriM
12/06/14, 15:12:55
[ONLY FOR 4.4.3 - KERNEL v.303]
A kernel based on CAF CM branch.
aosp: AK.303.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.303.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
changelog:
please use git.
MementoMoriM
12/06/14, 15:39:46
Va de lux 😁
Además de fluido muy buena batería [emoji41]
http://img.tapatalk.com/d/14/06/12/rubusedy.jpg
txuki2005
12/06/14, 15:51:07
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm tientas!!
Volvere a 4.4.3 cuando mahdi saque la nueva actualizacion ......:platano:
V.303 Parriba, pabajo, pal centro y padentro.. :D
txuki2005
12/06/14, 23:03:52
He vuelto a Madhi 4.4.3.....X-D y esto probando el ultimo AK..... y vaya sorpreson usando smartax..... hen
3 h de uso... 1 h 30 min de pantalla.... tenia un 40% y en 22% estaba cuando lo he puesto a cargar para hacer el primer ciclo.... y el system.ui solo un 6%... he encontrado la tecla....:platano:
Y va fluido el cabron :risitas:
MementoMoriM
12/06/14, 23:17:22
He vuelto a Madhi 4.4.3.....X-D y esto probando el ultimo AK..... y vaya sorpreson usando smartax..... hen
3 h de uso... 1 h 30 min de pantalla.... tenia un 40% y en 22% estaba cuando lo he puesto a cargar para hacer el primer ciclo.... y el system.ui solo un 6%... he encontrado la tecla....:platano:
Y va fluido el cabron :risitas:
Ya te digo además de que vuela los consumos son cojonudos 😁
txuki2005
12/06/14, 23:22:23
Acuerdate de desactivar "itinerancia de datos" en "uso de datos", viene activada por defecto.....:-)
slipknot30
12/06/14, 23:38:22
Pues lo dicho que con mi móvil no se lleva bien este kernel[emoji24]
alexret
12/06/14, 23:56:19
Pues lo dicho que con mi móvil no se lleva bien este kernel[emoji24]
No es el único que no se lleva bien este kernel...
slipknot30
12/06/14, 23:58:46
No es el único que no se lleva bien este kernel...
En cambio el GTA me va dpm[emoji15]
alexret
13/06/14, 00:10:12
En cambio el GTA me va dpm[emoji15]
Ese aún no lo he probado, pero esté le he tenido que subir los voltajes porque la pantalla se me quedaba en negro y tenía que reiniciar.
Probaré ese y si no, me vuelvo al Semaphore.
MementoMoriM
13/06/14, 00:30:40
Pues a mi me va genial , ahora lo meteré con la nueva Mahdi 😁
http://img.tapatalk.com/d/14/06/13/ygu8yzyv.jpg
http://img.tapatalk.com/d/14/06/13/ve2adega.jpg
adrianedu
13/06/14, 01:20:14
Alguien lo ha probado en la ultima liquid?
Nigthmare
13/06/14, 08:34:02
Alguien me puede facilitar el stock kernel de la 4.4.3 flasheable?por mas que busco por San Google solo lo encuentro para el n5
ewardofr
13/06/14, 09:27:50
Qué es lo de flash last UKM?
Eskorbutin
13/06/14, 09:32:07
Qué es lo de flash last UKM?
Hello and welcome! So I started this because I hated having to have a different app to change some of the kernel settings and having init.d scripts for each kernel was a hassle to me, plus some users were having trouble with so many options available so I created this for all those who like to flash & test different kernels like me. I would like to dedicate this project of mine to my friend ak for all the help and patience he has, he truly is a great dev and we owe him for some of the best kernels available for the Nexus 4.
So how this works is on every boot the script verifies all the tunables it finds specific for the kernel you have at the moment and generates the necessary files so it can be read & displayed on Synapse. Don't feel bad if you don't see all the listed options, it's just your kernel doesn't have those available.
In time I will be adding more scripts so we can have most, if not ALL tunables I can cram into. Hope you like it!
Screenshots:
27495032749505274950627495072749508274951227495132 7495142749515
So what you need:
Download Links:
Universal Kernel Manager v2.4 (http://www.androidfilehost.com/?fid=23501681358545864)
Synapse Google Play Link (https://play.google.com/store/apps/details?id=com.af.synapse)
UKM Uninstaller (http://www.androidfilehost.com/?fid=23501681358544746)
To install:
Features:
Info
General
Model Number
Android Version
Kernel Version
ROM Description
ROM Version
ROM Build Date
SOC Binning
Last KMSG
Status
Battery Temperature
CPU Temperature
Memory
Uptime
Unused CPU States
Time in state for CPUs
Kernel Wakelocks
CPU
Live CPU Frequency
CPU Min Frequency
CPU Max Frequency
CPU Max Screen Off Frequency
CPU Multicore Power Saving
CPU Governor
CPU Governor Options
CPU Governor Tunables
Hotplug
MPDecision (Qualcomm)
Intelliplug (faux123)
ECO Mode
Snakecharmer
Intellithermal
MSM MPDecision (show-p1984)
Screen off Single Core
Min CPUs
Max CPUs
Idle Frequency
Event Boost
MSM Hotplug (myfluxi)
Min CPUs
Max CPUs
Max CPUs Boosted
Boost Lock Duration
Down Lock Duration
History Size
Update Rate
Fast Lane Load
Offline Load
Suspend Frequency
Auto Hotplug (Thalamus)
Disable Load Threshold
Enable Load Threshold
Enable All Load Threshold
Min Sampling Rate
Sampling Periods
Min Online CPUs
Max Online CPUs
Dynamic Hotplug (stratosk)
Minimum Online CPU
Maximum Online CPU
Up Threshold
Up Timer Control
Down Timer Control
Alucard Hotplug (Alucard)
Hotplug Enable
Sampling Rate
Max Cores Limit
Max Cores Limit Sleep
CPU Down Rate
CPU Up Rate
Hotplug Loads
Hotplug RQs
Hotplug Frequencies
Mako Hotplug (franciscofranco)
Cores on touch
First Level
Suspend Frequency
CPU Boost Driver
Boost
Sync Threshold
Input Boost ms
Input Boost Frequency
CPU Voltage
Global Voltage
Frequency Voltage
AK
Faux
Semaphore
I/O Control
Read-ahead Size
I/O Scheduler
General I/O Tunables
I/O Scheduler Tunables
GPU
Live GPU Frequency
GPU Max Frequency
GPU Governor
Simple Governor Tunables
Interactive Governor Tunables
Gamma
Faux Gamma Profiles
Faux Gamma Tunables
Franco Gamma Tunables
Motley Gamma Tunables
LCD Backlight Tunables
Sound
Faux Sound Profiles
Faux Sound Tunables
Franco Sound Tunables
Speaker
Faux Speaker Profiles
Faux Speaker Tunables
Memory
Z-RAM
Virtual Memory
Wake Control
Apply at init.d
DoubleTap2Wake
Touch Wake
Sweep2Wake
Sweep2Sleep
Power Key Suspend
Miscellaneous
TCP Congestion Control
Temperature Control
Temperature Limit Minimum Frequency
Power Suspend State
FSYNC
Dynamic FSYNC
Vibrator Strength
USB Fast Charge
OTG
Battery Life Extender
Touchscreen Accuracy Filter
LED Control
Advanced
C-States
Kernel Samepage Merging (KSM)
Ultra Kernel Samepage Merging (UKSM)
Gentle Fair Sleepers
Low Memory Killer
Build.Prop
Wifi Scan Interval
VM Heapsize
Allow Purgeable Assets
DNS Tweaks
Tools
Toggle Bootloader Lockstate
Toggle Bootloader Tamper Flag
Toggle SELinux Status
Preferred Network Mode
Kernel Image Managment (Backup, Restore)
Log Creation (logcat, dmesg, last_ksmg)
Reboot
Profiles
Changelog:
Thanks:
ak - for his help in getting this started.
AndreiLux - for his awesome app Synapse.
osm0sis - for his ideas on the Galaxy Nexus.
GitHub is Here:
UKM (https://github.com/apbaxel/UKM)
Any suggestions, bugs or others settings you need just let me know.
Please rate the thread and don't forget the THANKS button below! :D
Un script para complementar synapse
ewardofr
13/06/14, 09:32:58
Gracias tío
Para poner otro kernel después de este tendría que volver a instalar la rom otra vez, o me valdría con kernel stock y el kernel que quiera?
alexret
13/06/14, 11:10:04
Para poner otro kernel después de este tendría que volver a instalar la rom otra vez, o me valdría con kernel stock y el kernel que quiera?
Tienes que instalar el AK.unistaller que tienes en la página de descarga y después el kernel que quieras, aunque yo me fío mas de reinstalar la rom con wipe cache y dalvik cache.
Instalado junto con synapse, a ver que tal tira lo que mas me interesa es la duración de batería.
MementoMoriM
13/06/14, 12:06:05
Instalado junto con synapse, a ver que tal tira lo que mas me interesa es la duración de batería.
Con Smartmax y row a mi y otros compas nos dura mazo la batería 😁
Podéis poner unas capturas?
Como lo haceis con wifi o con 3g?
txuki2005
13/06/14, 14:07:26
Mahdi última versión + Ak ultima versión + synapse = crema!!!!
Son mis oídos que estaban socios o este kernel mejora una barbaridad el sonido??
Con Smartmax y row a mi y otros compas nos dura mazo la batería 😁probando y parece que pierde un pelin de fluidez.
MementoMoriM
13/06/14, 14:27:30
Son mis oídos que estaban socios o este kernel mejora una barbaridad el sonido??
Mejora mucho el sonido, no eres el único en notar esa gran diferencia 😁
probando y parece que pierde un pelin de fluidez.
Pues es raro , a mí me sigue igual de fluido y es de lo mejor en ese aspecto de los kernel que he probado.
Son mis oídos que estaban socios o este kernel mejora una barbaridad el sonido??
Yo lo utilizó principalmente por eso, ya que el Viper no me acaba de gustar..
http://img.tapatalk.com/d/14/06/13/dehajazy.jpg
Yo lo utilizó principalmente por eso, ya que el Viper no me acaba de gustar..
http://img.tapatalk.com/d/14/06/13/dehajazy.jpg
En sound pones quality y en speaker? LG stock?
Yo llevo llevo LG stock en los dos lados.
Ponte unos cascos y escucha la diferencia de sonido en quality lo fliparas.. En speaker lo tengo stock si ;)
Tienes que instalar el AK.unistaller que tienes en la página de descarga y después el kernel que quieras, aunque yo me fío mas de reinstalar la rom con wipe cache y dalvik cache.
Buenas.
El que está en la página de descargas, está en el apartado de las versiones para 4.4.2. En el apartado de 4.4.3 no hay. Alguien sabe si sirve el mismo?
Gracias.
Este kernel va muy bien pero parece que pasa despierto más tiempo del que debería no??
http://img.tapatalk.com/d/14/06/15/qe9uve6y.jpg
Según esto parece que esta una hora más despierto que se pantalla encendida y hoy no he puesto música ni nada.
MementoMoriM
17/06/14, 08:51:39
[ONLY FOR 4.4.3 - KERNEL v.311]
A kernel based on CAF CM branch.
aosp: AK.311.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.311.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- uninstall synapse
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
small:
- merged cm
- merged linux
- merge google common
- disable logcat
- patches for logger
- fixes for ondemand, interactive, conservative, smartmax
- fixes for hotplug
- removed cpu boost
full changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.311.POSEIDON.MAKO
Karlis Ogsts - staging: android: logger: Correct write offset reset on error
Luca Clementi - Staging: Android: logger: module_exit implementation
Charndeep Grewal - staging: android: logger: enforce GID and CAP check on log flush
Tim Bird - staging: android: logger: Fix some sparse and whitespace issues
Cruz Julian Bishop - staging: android: logger: Finish documentation of two structs
Sachin Kamat - staging: Android: Fix some checkpatch warnings
Tim Bird - staging: android: logger: Allocate logs dynamically at boot (v3)
Ruchi Kandoi - prctl: adds the capable(CAP_SYS_NICE) check to PR_SET_TIMERSLACK_PID.
Ruchi Kandoi - prctl: adds PR_SET_TIMERSLACK_PID for setting timer slack of an arbitrary thread.
Ruchi Kandoi - cpufreq: Persist cpufreq time in state data across hotplug
anarkia1976 - ak_mako_defconfig: disable ANDROID_LOGGER
anarkia1976 - Kernel Version: AK.310.POSEIDON.MAKO
Greg Kroah-Hartman - Linux 3.4.94
anarkia1976 - Kernel Version: AK.308.POSEIDON.MAKO
anarkia1976 - block: disable add_random for more performance on SSD's
anarkia1976 - Kernel Version: AK.307.POSEIDON.MAKO
anarkia1976 - cpufreq: interactive: clean code
anarkia1976 - cpufreq: interactive: set and tuning for poseidon style
anarkia1976 - msm: hotplug: lock 500, boost 2500, lane 400
anarkia1976 - Kernel Version: AK.306.POSEIDON.MAKO
anarkia1976 - ak-mako-build: switch to new toolchain 4.9.1-2014.06.20140614.CR83
Stratos Karafotis - cpufreq: ondemand: remove copy_prev_load from 'struct cpu_dbs_common_info'
Stratos Karafotis - cpufreq: ondemand: Be friendly towards latency-sensitive bursty workloads
Linus Torvalds - futex: move user address verification up to common code
anarkia1976 - msm: otg: try to fix charging while in use
anarkia1976 - Kernel Version: AK.305.POSEIDON.MAKO
anarkia1976 - cpufreq: smartmax: set default sample_rate to 50mS
anarkia1976 - cpufreq: rework policy rules for utilization
anarkia1976 - cpufreq: ondemand: We want all CPUs to do sampling nearly on same jiffy
mrg666 - msm: mach-msm: remove perf_debug
Chester Kener - mm: vmscan: decrease Swappiness
Stratos Karafotis - cpufreq: Break out early if freq equals to target_freq
Tk-Glitch - tick: Dynamically set broadcast irq affinity
Tk-Glitch - msm: rpm-smd: Configure WQ for higer priority
Will Deacon - ARM: mm: remove IPI broadcasting on ASID rollover
TripNRaVeR - suspend: shorten time to enter sleep state
TripNRaVeR - mmc: decrease wakelock timeout
anarkia1976 - kernel: timer: Optimize apply_slack() for size and speed
barome - arm: mach-msm: decouple QCACHE from MSM board
anarkia1976 - ak_mako_defconfig: disable QUEUE_STATS
Stratos Karafotis - cpufreq: Initial CPU utilization should be 0
anarkia1976 - cpufreq: conservative: set default min_sample_rate to 50mS
anarkia1976 - Kernel Version: AK.304.POSEIDON.MAKO
anarkia1976 - Revert "cpufreq: Add cpu-boost driver"
anarkia1976 - Revert "cpufreq: Add a sync limit to cpu-boost"
anarkia1976 - Revert "cpufreq: Add Input Boost feature to the cpu-boost driver"
anarkia1976 - Revert "cpufreq: Disable cpu-boost by default"
anarkia1976 - Revert "cpufreq: cpu-boost: Use hotplug thread infrastructure"
anarkia1976 - Revert "cpufreq: cpu-boost: Fix queue_delayed_work_on() race with hotplug"
anarkia1976 - Revert "cpufreq: cpu-boost: Remove unused waitqueue"
anarkia1976 - Revert "cpufreq: cpu-boost: Re-issue boosts above minimum frequency"
anarkia1976 - Revert "cpufreq: cpu-boost: Fix cores getting stuck"
Amit Daniel Kachhap - PM / cpufreq: Initialise the cpu field during conservative governor start
Michal Pecio - cpufreq: conservative: update frequency when limits are relaxed
Vamooos! A ver que tal se porta.. :D
http://img.tapatalk.com/d/14/06/17/a3esuhy3.jpg
Nigthmare
17/06/14, 14:46:09
Veo lag,alguien mas?aunque es demasiado pronto para sacar conclusiones
MementoMoriM
17/06/14, 15:03:03
He vuelto, ya daré impresiones ....
http://img.tapatalk.com/d/14/06/17/aqusu7ug.jpg
Veo lag,alguien mas?aunque es demasiado pronto para sacar conclusiones
Lag? Ten en cuenta que es un kernel que default viene con oc a 1728, así que permiteme que lo dude.. Que ROM y configuración llevas?
Actualizacion del kernel
[4.4.4 - KERNEL v.320]
A kernel based on CAF CM branch.
aosp: AK.320.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.320.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
small changelog:
- various patches for stockdemand
- speed up late resume hack
- set max 1.5Ghz
- revert gpu overclock max 400Mhz
- revert vdd boost disabled
- enable msm logo - aklogo.rle support at boot
- fb fixes
- remove some debugs
- ecc ecc ecc
Muy buenos consumos con el 320 toda la mañana con datos y un par de horas con WiFi + media hora en llamadas
http://img.tapatalk.com/d/14/06/25/e3ame3en.jpg
http://img.tapatalk.com/d/14/06/25/aja8ezeq.jpg
MementoMoriM
26/06/14, 14:33:19
Actualización Synapse
v2.6
Fixed invalid argument error
Fixed config.json generate with duplicate GPU freq
Fixed several tunable parameters
Additional mount parameters for wake options
Merged CPU Gov tab with CPU tab
Added CPU Global Volt file to save values
http://www.androidfilehost.com/?fid=23501681358552904
MementoMoriM
28/06/14, 16:21:53
[4.4.4 - KERNEL v.324]
A kernel based on CAF CM branch.
aosp: AK.324.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.324.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
[TUNING AND RESOURCES]
Thanks a lot to @gorilla p for sharing files and doc for tuning battery/performance
Link (http://bit.ly/makostuff)
please use git for changelog.
MementoMoriM
28/06/14, 21:28:34
Todo bien por aquí 😁
http://img.tapatalk.com/d/14/06/29/asynemyz.jpg
Consumos con poseidon 324 + c-rom
http://img.tapatalk.com/d/14/07/02/yvezegus.jpg
http://img.tapatalk.com/d/14/07/02/ypu7a8uj.jpg
Próximamente:
New kernel is near.
Prechangelog:
- merged cm11
- merged linux 3.4.96
- merged google L preview
- merged common 3.4.x kernel
- ecc ecc
diego.cr
04/07/14, 18:37:14
New test kernel
http://forum.xda-developers.com/nexus-4/orig-development/kernel-ak-t2473454/post53904254
Actualizacion de este kernel
[4.4.4 - KERNEL v.330 - EXPERIMENTAL]
A kernel based on CAF CM branch.
aosp: AK.330.POSEIDON.MAKO (http://ak.hiddenbytes.org/)
cm: AK.330.POSEIDON.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
small changelog;
- 3.4.97 linux
- merged cm11 branch
- bfq v5
- interactive patches
- new prima 3.2.3.19
- added intelli plug v3.7
- row fixes
- some backported features from L branch Hammerhead
- make msm thermal throttle harmonious
- reduced thermal throttle to 75c (-10)
- set msm hotplug 2 cpus boosted by default
- added screen off max cpu online to msm hotplug (2 default - settable via synapse)
- added switch for disable thermal throttle debug (enabled by default - settable via synapse)
- ecc ecc
MementoMoriM
09/07/14, 03:34:33
Probando, que ahora no tengo mucho tiempo por trabajo pero voy a ver si mejora lo que tengo....http://img.tapatalk.com/d/14/07/09/y5uhy8eg.jpg
xeneize500
11/07/14, 12:56:32
hay una nueva version del experimental...no encuentro el changelog
Edit: ya publicaron el changelog
small changelog:
- new aklogo
- lazy gov
- whaetley gov
- f2fs last patches
- linux 3.4.98
- overclock cpu to 1.9Ghz
- overclock gpu to 487Mhz
- row scheduler default
- stockdemand governor default
- new Gcc Optimizations
- arch power enabled
- topology fixes
- merged last android 3.4 source
MementoMoriM
11/07/14, 14:53:29
[4.4.4 - KERNEL v.335 - EXPERIMENTAL]
A kernel based on CAF CM branch.
aosp: AK.335.MAKO (http://ak.hiddenbytes.org/)
cm: AK.335.MAKO.CM (http://ak.hiddenbytes.org/)
[INSTALL STEP-BY-STEP]
- go to recovery
- flash stock kernel of your rom
- flash ak kernel
- flash last UKM
- reboot
- install synapse
- enjoy ak and synapse kernel control
- finish
small changelog:
- new aklogo
- lazy gov
- whaetley gov
- f2fs last patches
- linux 3.4.98
- overclock cpu to 1.9Ghz
- overclock gpu to 487Mhz
- row scheduler default
- stockdemand governor default
- new Gcc Optimizations
- arch power enabled
- topology fixes
- merged last android 3.4 source
full changelog:
Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.335.MAKO.CM
Greg Kroah-Hartman - Linux 3.4.98
anarkia1976 - ak_mako_defconfig: set ROW
anarkia1976 - ak_mako_defconfig: enable CPU_OVERCLOCK_ULTRA
anarkia1976 - ak_mako_defconfig: enable GPU_OVERCLOCK
anarkia1976 - makefile: Tune Kernel Flags after checking with GccOptimizationTests
anarkia1976 - makefile: cleaning and remove -ffast-math
anarkia1976 - Revert "sched/cpuidle: reduce IPI storm. Backport upstream 3.16 scheduler updates"
anarkia1976 - ak_mako_defconfig: enable GOV_LAZY and GOV_WHEATLEY
anarkia1976 - cpufreq_lazy: Fix comparison of distinct pointer types lacks a cast
anarkia1976 - cpufreq: wheatley: cleaning unused code
anarkia1976 - Add LAZY and WHEATLEY Governors
Sreeram Ramachandran - Handle 'sk' being NULL in UID-based routing.
anarkia1976 - ak_mako_defconfig: enable OPTIMIZE_FOR_SIZE
Paul Reioux - sched/cpuidle: reduce IPI storm. Backport upstream 3.16 scheduler updates
David Savage - fs: f2fs: fix duplication from f2fs cherry-picks
David Savage - Revert "f2fs: atomically set inode->i_flags in f2fs_set_inode_flags()"
Jaegeuk Kim - f2fs: support f2fs_fiemap
Jaegeuk Kim - f2fs: recover fallocated space
Changman Lee - f2fs: large volume support
Chao Yu - f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
Jaegeuk Kim - f2fs: fix recursive lock by f2fs_setxattr
Chao Yu - f2fs: add a tracepoint for f2fs_read_data_page
Chao Yu - f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
Chao Yu - f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
Chao Yu - f2fs: add a tracepoint for f2fs_write_end
Chao Yu - f2fs: add a tracepoint for f2fs_write_begin
Zhang Zhen - f2fs: fix checkpatch warning
Jaegeuk Kim - f2fs: decrease the lock granularity during write_begin
Jaegeuk Kim - f2fs: no need to wait on page writebck to meta pages
Jaegeuk Kim - f2fs: avoid grab_cache_page_write_begin for data pages
Jaegeuk Kim - f2fs: split grab_cache_page and wait_on_page_writeback for node pages
Chao Yu - f2fs: fix to truncate inline data in inode page when setattr
Chao Yu - f2fs: set errno when f2fs_iget failed in recover_dentry
Chao Yu - f2fs: introduce help macro ADDRS_PER_PAGE()
Jaegeuk Kim - f2fs: submit bio at the reclaim path
Jaegeuk Kim - f2fs: return errors right after checking them
Jaegeuk Kim - f2fs: pass flags field to setxattr functions
Jaegeuk Kim - f2fs: clean up long variable names
Chao Yu - f2fs: handle inline data independently in f2fs_bmap
Jaegeuk Kim - f2fs: avoid BUG_ON when mouting corrupted image having garbage blocks
Jaegeuk Kim - f2fs: add available_nids to fix handling max_nid correctly
Fabian Frederick - f2fs: add static to get_max_meta_blks
Zhang Zhen - f2fs: atomically set inode->i_flags in f2fs_set_inode_flags()
Jingoo Han - f2fs: make recover_inline_xattr() static
Jaegeuk Kim - f2fs: fix to unlock f2fs_lock at the omitted error case
Jaegeuk Kim - f2fs: call redirty_page_for_writepage
Jaegeuk Kim - f2fs: avoid to conduct roll-forward due to the remained garbage blocks
Kent Overstreet - block: Add bio_for_each_segment_all()
Pranav Vashi - ARM: topology: Suppress clock-frequency error
Pranav Vashi - ARM: topology: Add efficiency coefficient for Krait
Pranav Vashi - sched: Add controls for sched features
Vincent Guittot - sched: cpu_power: enable ARCH_POWER
anarkia1976 - sched: fix compiling errors for num_cpus_frozen
Thomas Renninger - cpupower: Remove mc and smt power aware scheduler info/settings
Alex Shi - sched/numa: Add SD_PERFER_SIBLING to CPU domain
anarkia1976 - ak_mako_defconfig: remove SCHED_MC and SCHED_SMT
Paul Reioux - sched: Remove stale power aware scheduling remnants and dysfunctional knobs
Mark Brown - ARM: 8008/1: topology: Coding style fixes
Mark Brown - ARM: 7920/1: topology: Staticise non-exported symbols
Catalin Marinas - ARM: 7436/1: Do not map the vectors page as write-through on UP systems
Will Deacon - ARM: mm: introduce present, faulting entries for PAGE_NONE
Will Deacon - ARM: mm: introduce L_PTE_VALID for page table entries
Catalin Marinas - ARM: 7416/1: LPAE: Remove unused L_PTE_(BUFFERABLE|CACHEABLE) macros
Lorenzo Colitti - net: core: Support UID-based routing.please press thanks.
carigleba
12/07/14, 00:26:15
Llevo mahdi 2.7 con este kernel y de momento todo bien. A ver si mañana me porto bien y no toqueteo mucho el movil (me refiero a reinicios y pruebas) para ver el consumo, aunque de momento pinta bien. Lo llevo con synapse y lo unico que no me cambia es el gamma. Alguien igual?
Eskorbutin
12/07/14, 01:01:07
Llevo mahdi 2.7 con este kernel y de momento todo bien. A ver si mañana me porto bien y no toqueteo mucho el movil (me refiero a reinicios y pruebas) para ver el consumo, aunque de momento pinta bien. Lo llevo con synapse y lo unico que no me cambia es el gamma. Alguien igual?
Resetea synapse en la ultima pestanya y luego vuelve a probar, a mi me funciona asi
carigleba
12/07/14, 09:58:26
Ok, ya me funciona el gamma. Ahora si que si........:ok:
MementoMoriM
16/07/14, 18:48:23
Probando.....
http://img.tapatalk.com/d/14/07/17/ahy2egyb.jpg
MementoMoriM
18/07/14, 10:13:04
Actualización Synapse
http://www.androidfilehost.com/?fid=23578570567714453
v2.8
Fixed more config.json errors for Nexus 5
Added Default Custom Profiles (to avoid reset)
Added better permissions for init.d wake toggles
More Code optimization
Added support for Oneplus One (let's go @ak!!!)
Malas noticias Ak se ha pillado el oneplus y dice adios a su desarrollo para Kernels en Nexus 4, sin duda para mi era de lo mejorcito.. :(
MementoMoriM
23/07/14, 09:59:52
Malas noticias Ak se ha pillado el oneplus y dice adios a su desarrollo para Kernels en Nexus 4, sin duda para mi era de lo mejorcito.. :(
Pues si son malas por que a mi me gustaba mucho...
MementoMoriM
24/07/14, 23:11:32
Cerrar hilo.
Nonamed
24/07/14, 23:14:51
Que el proyecto se haya cancelado no es motivo suficiente para cerrar un hilo.
Lo mejor será dejarlo abierto para las posibles dudas que los usuarios puedan solucionar entre ellos.
MementoMoriM
24/07/14, 23:27:39
Que el proyecto se haya cancelado no es motivo suficiente para cerrar un hilo.
Lo mejor será dejarlo abierto para las posibles dudas que los usuarios puedan solucionar entre ellos.
Ok.
carigleba
24/07/14, 23:57:48
Pues ahi va mi opinion. Yo lo llevo con liquid (el 335) y lo noto un tanto tragon. Ahora si, muy fluido y estable.
Pues ahi va mi opinion. Yo lo llevo con liquid (el 335) y lo noto un tanto tragon. Ahora si, muy fluido y estable.
Yo llevo la 330 y el consumo es mas estable
pepelopelope
03/08/14, 12:31:11
Yo llevo la 330 y el consumo es mas estable
Que gobernor le pones? He leido no se donde que AK con wheathly va muy bien, pero eso es en 335.,cual pones en 330??
MementoMoriM
03/08/14, 22:17:43
Que gobernor le pones? He leido no se donde que AK con wheathly va muy bien, pero eso es en 335.,cual pones en 330??
Me habrás leído a mi jejej
pepelopelope
04/08/14, 13:03:15
Me habrás leído a mi jejej
Eras tu!! Y ayer con tiempo me dio por probar lo que dijiste, y perfecto vaya :))
MementoMoriM
08/08/14, 22:15:15
Consumos con AK con Weathley y Mahdi ROM
http://img.tapatalk.com/d/14/08/09/ba4uza5a.jpg
http://img.tapatalk.com/d/14/08/09/y2asuzuq.jpg
Hola, estoy con la 335 con mahdi y muy estable, pero he visto otra versión la 030b8.onepone.zip sabéis es la continuación o q? Saludos
Hola, estoy con la 335 con mahdi y muy estable, pero he visto otra versión la 030b8.onepone.zip sabéis es la continuación o q? Saludos
Onepone se refiere a que ese kernel es para el one plus one si lo instalas en mako tendras un bonito pisapapeles de la marca nexus.
Gracias por tu respuesta! He visto en xda una versión experimental la 345. La habéis probado? Saludos
Eskorbutin
14/08/14, 21:36:47
Update AK.345
Aldrin Holmes - Linux 3.4.102
Tejun Heo - kthread: implement probe_kthread_data()
Oleg Nesterov - kthread: kill task_get_live_kthread()
Oleg Nesterov - kthread: introduce to_live_kthread()
Subbaraman Narayanamurthy - kthread: Fix the race condition when kthread is parked
Stephen Warren - ARM: 7780/1: add missing linker section markup to head-common.S
Hans de Goede - cgroup: Fix use after free of cgrp (cgrp->css_sets)
Hans de Goede - cgroup: Take css_set_lock from cgroup_css_sets_empty()
Mikulas Patocka - crypto: arm-aes - fix encryption of unaligned data
AK.345.MAKO (http://hubdroid.com/~CallMeAldy/AK/AOSP/AK.345.MAKO.zip)
AK.345.MAKO.CM (http://hubdroid.com/~CallMeAldy/AK/CM/AK.345.MAKO.CM.zip)
No DT2W Profiles since it had too many conflicts.
Eskorbutin
14/08/14, 21:39:51
A mi me va muy bien, no lo hace nada mal el nuevo dev @CallMeAldy
MementoMoriM
15/08/14, 18:19:51
A ver que tal el último AK con Mahdi ROM😁
http://img.tapatalk.com/d/14/08/16/zu5unety.jpg
carigleba
16/08/14, 19:41:23
A ver que tal el último AK con Mahdi ROM😁
http://img.tapatalk.com/d/14/08/16/zu5unety.jpg
Cuenta socio....que tal va?
MementoMoriM
17/08/14, 01:49:13
Cuenta socio....que tal va?
Muy bien, pero he estado moviéndome y no he podido cuantificar los consumos mejor.
MementoMoriM
20/08/14, 01:43:21
AK.350.MAKO
Aldrin Holmes - Linux 3.4.103
Aldrin Holmes - Added Sweep2Wake
savoca - lge_touch_core: Removed unused int variable retry
savoca - lge_touch_core: Implement doubletap-wake profiles TricksterMOD supports multiple values for dt2w, let's put it to use. 1 - (Semaphore Stock) Center wake zone 2 - Full wake zone 3 - Bottom half of screen wake zone 4 - Top half of screen wake zone
savoca - lge_touch_core: Fix dt2w set with screen off & android_touch
savoca - s2w: heavy cleanup, remove debug/unnecessary lines
savoca - dt2w: remove old code
savoca - lge_touch_core: sysfs to android_touch/doubletap2wake
stratosk - lge_touch_core: implement touchwake and doubletap wake - Also remove old s2w/dt2w/ps code from lge_touch_core.c
savoca - sweep2wake: Make S2W bidirectional Also enable S2W+S2D if S2W = 1 and S2D = 1
savoca - s2d: update inline with m8/n5/falcon - assign s2d_enabled to android_touch sysfs - don't update if any value is 255 - screen off if kcal drops < 1
savoca - LCD_KCAL: Change rgb values using sweep2sleep gestures
savoca - s2w: Add bi-directional sweep2sleep
savoca - s2w: Remove s2w_s2sonly, replace w/ s2w == '2'
Dennis Rassmann - drivers/input/touchscreen/sweep2wake: if s2s_only is true, opt out early
Dennis Rassmann - drivers/input/touchscreen/sweep2wake: add flo/deb definitions
Dennis Rassmann - drivers/input/touchscreen/lge_touch_core: fix ifdef, fixes dt2w without s2w
Dennis Rassmann - drivers/input/touchscreen/lge_touch_core: trigger on low and do not suspend the IRQ
Dennis Rassmann - drivers/input/touchscreen/sweep2wake: add mako definitions
Dennis Rassmann - drivers/input/touchscreen/lge_touch_core: release all touchscreen events when going to sleep
Dennis Rassmann - drivers/input/touchscreen/lge_touch_core: Add prevent_sleep functionality
Dennis Rassmann - drivers/input/touchscreen/sweep2wake: Fix compilation with earlysuspend
Dennis Rassmann - drivers/input/touchscreen/doubletap2wake: Fix compilation with earlysuspend
Dennis Rassmann - driver/input/touchscreen: add new s2w & dt2w implemenation from hammerhead
Dennis Rassmann - lge_touch_core: i2c_read: auto retry 10 times before erroring out The i2c devices we are connecting to may not be ready yet, or just busy. Retry with a 10ms pause in order to still obtain touch data. This improves overall touch data robustness, but the main thing it does: WE CAN FINALLY GET TOUCH DATA IN SUSPEND ALL THE TIME.
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: initial support and code"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: possible fix touchwake reboot issue"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Use delayed work to handle powerkey"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Fix checkpatch warnings"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Remove unused code"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Introduce LED trigger"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Handle touch suspend/resume only if touchwake is enabled"
Aldrin Holmes - Revert "Revert "input: lge_touch_core: touchwake: Handle touch suspend/resume only if touchwake is enabled""
Aldrin Holmes - Revert "Revert "Revert "input: lge_touch_core: touchwake: Handle touch suspend/resume only if touchwake is enabled"""
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Send input to touchwake only if it's enabled"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Fix issue that touch remains unpowered after late_resume"
Aldrin Holmes - Revert "input: lge_touch_core: touchwake: Unlock the wakelock when disable the driver
DOWNLOAD
(http://hubdroid.com/~CallMeAldy/AK/)
MementoMoriM
21/08/14, 10:14:20
New version incoming!. All reported errors were fixed so let's hope nothing new arrives so I can concentrate on new stuff I'm planning for UKM :D. As always remember to hit the thanks button & rate the thread for those who haven't. Happy flashing! :highfive:
v3.2
Fixed Intelliplug 5.0 tunable errors.
Fixed GPU voltages with uV values.
Disabled toggle switch between s2s/s2d.
Fixed write error invalid argument display message.
Apply value of 1 to kcal_ctrl if it exists.
Added back s2s, removed unnecessary notifiers.
Added High Performance Mode sound tunable.
Added descriptions for Memory & Advanced options.
New Laptop Mode (Auto FS Writeback Delay Mode) tunable.
Download: UKM v3.2 (https://www.androidfilehost.com/?fid=23622183712459634)
Eskorbutin
22/08/14, 11:05:24
Borrado
MementoMoriM
23/08/14, 23:46:03
Consumos Mahdi 12-08 con AK345
😁
http://img.tapatalk.com/d/14/08/24/ve8usehy.jpg
http://img.tapatalk.com/d/14/08/24/seje3y9a.jpg
http://img.tapatalk.com/d/14/08/24/a7a3abad.jpg
MementoMoriM
29/08/14, 09:48:26
It's that time again!. This update brings a lot of new stuff in the mix like additional tools (Optimize DB, Drop Caches), some new requested features (Vibrator for OPO, finer tuned CPU voltages), @eng.stk new hotplug (Blu_plug) and additional device support to UKM (hell yeah! :D).
I've been keeping an eye on all kernels & devices that are using UKM as their to-go kernel manager and found out a few devices are working properly but have been resorting to changing the config file to make it work, so with that I have to say to you... Not anymore!!! :victory:, with that I welcome the LG Optimus G (all gee variants), LG G Pad 8.3 (v500) & Nexus 7 2012 (grouper/tilapia) to the UKM device list.
As always please remember to hit the thanks button & rate the thread for those who haven't. Happy flashing! ;).
v3.3.1
Lowered CPU voltage step.
Increased max sleep for KSM & UKSM.
Added Optimize Databases tool.
Added Drop Caches tunable (Clear VFS Caches).
Added Vibrator support for OPO.
Added support for devices with auto Headphone PowerAmp.
Added additional gamma profiles for N5.
New Blu_Plug hotplug & updated AutoSMP tunables.
Added support for LG Optimus G, LG G Pad 8.3 & Nexus 7 2012.
Fixed derp on action for powersaver_mode (Blu_plug)
Download: UKM v3.3.1 (https://www.androidfilehost.com/?fid=23622183712463925)
MementoMoriM
29/08/14, 23:07:16
@m4dbra1n alright I've fixed the device config, please let me know if this works for you. Those with LG Optimus G please flash this version:
v3.3.2
Fixed echo write error when setting CPU frequencies
Fixed derp on wildcard for gee variants
Download: UKM v3.3.2 (https://www.androidfilehost.com/?fid=23622183712464234)
MementoMoriM
31/08/14, 19:47:23
AK.355.MAKO
CallMeAldy - Switch to 4.9.2-2014.08.20140831.CR83 Toolchain
mrg666 - Random: backport updates from Linux master (3.13-rc4) lib, net: make isodigit() public and use itAndy Shevchenko random: add debugging code to detect early use of get_random_bytes()Theodore Ts'o random: initialize the last_time field in struct timer_rand_stateTheodore Ts'o random: don't zap entropy count in rand_initialize()Theodore Ts'o random: printk notifications for urandom pool initializationTheodore Ts'o random: make add_timer_randomness() fill the nonblocking pool firstTheodore Ts'o random: convert DEBUG_ENT to tracepointsTheodore Ts'o random: push extra entropy to the output poolsTheodore Ts'o random: drop trickle modeTheodore Ts'o random: adjust the generator polynomials in the mixing function slightlyTheodore Ts'o random: speed up the fast_mix function by a factor of fourTheodore Ts'o random: cap the rate which the /dev/urandom pool gets reseededTheodore Ts'o random: optimize the entropy_store structureTheodore Ts'o random: optimize spinlock use in add_device_randomness()Theodore Ts'o random: fix the tracepoint for get_random_bytes(_arch)Theodore Ts'o random: account for entropy loss due to overwritesH. Peter Anvin random: allow fractional bits to be trackedH. Peter Anvin random: statically compute poolbitshift, poolbytes, poolbitsH. Peter Anvin random: mix in architectural randomness earlier in extract_buf()Theodore Ts'o random: allow architectures to optionally define random_get_entropy()Theodore Ts'o random: run random_int_secret_init() run after all late_initcallsTheodore Ts'o char: Convert use of typedef ctl_table to struct ctl_tableJoe Perches1 random: fix accounting race condition with lockless irq entropy_count updateJiri Kosina drivers/char/random.c: fix priming of last_dataJarod Wilson lib/string_helpers: introduce generic string_unescapeAndy Shevchenko random: fix locking dependency with the tasklist_lockTheodore Ts'o locking: Various static lock initializer fixesThomas Gleixner random: prime last_data value per fips requirementsJarod Wilson random: fix debug format stringsJiri Kosina random: make it possible to enable debugging without rebuildJiri Kosina random: mix in architectural randomness in extract_buf()H. Peter Anvin random: Add comment to random_initialize()Tony Luck random: add tracepoints for easier debugging and verificationTheodore Ts'o
motley - mako LCD: keep RGB custom colors alive after screen off/on
savoca - LCD_KCAL: Introduce configurable kcal_min
savoca - LCD_KCAL: Prevent out-of-range input values
savoca - LCD_KCAL: Fix mistake on out-of-range values
savoca - s2d: turn off display if sweep < kcal_min, not 1
CallMeAldy - ak-mako-build.sh: Minor changes
DOWNLOAD (http://hubdroid.com/~CallMeAldy/AK-Kernels/Mako/)
MementoMoriM
31/08/14, 20:40:05
Todo guay 😁
http://img.tapatalk.com/d/14/09/01/3ajaryve.jpg
Estoy usando sypnapse con este kernel flasheandolo ademas con el UKM. Pero no consigo activar el OTG. la opcion en synapse esta marcada y reinicie el movil, pongo el cable del OTG pero no me reconoce el pendrive que he conectado.
¿Ha vosotro os funciona el OTG? si es asi como lo teneis puesto?
dnfuentes
18/09/14, 12:17:57
Estoy usando sypnapse con este kernel flasheandolo ademas con el UKM. Pero no consigo activar el OTG. la opcion en synapse esta marcada y reinicie el movil, pongo el cable del OTG pero no me reconoce el pendrive que he conectado.
¿Ha vosotro os funciona el OTG? si es asi como lo teneis puesto?
En el n4 no heprobado lo del otg, pero si no recuerdo mal, necesitas que el otg tenga alimnetacion externa para que lo reconozca, sino directamente no te funcionara.
MementoMoriM
08/10/14, 10:58:28
AK.360.MAKO
CallMeAldy - Kernel Version: AK.360.MAKO
ktoonsez - sched: remove redundant update_runtime notifier
ktoonsez - mm: optimize Kernel Samepage Merging(KSM)
Puneet Kumar - CHROMIUM: mm: Fix calculation of dirtyable memory
franciscofranco - arm: compile with the generic rwsem
Rob Herring - ARM: 7494/1: use generic termios.h
Andi Kleen - Disable -fconserve-stack on ARM v2
Sumit Singh - hrtimer: enhance power efficiency
Sumit Singh - sched: Trying to reduce power usage
Sumit Singh - seqlock: enhance power efficiency
Sumit Singh - cpu: enhance power efficiency
Sumit Singh - ARM: including asm-generic/processor.h
Sumit Singh - asm-generic: processor.h: adding new header file
Sumit Singh - llist: defining relaxed version of llist_empty
Sumit Singh - asm-generic: relaxed.h: defined relaxed.h
Sumit Singh - sched: defining relaxed version of idle_cpu
Sumit Singh - arm: asm: relaxed.h: defined relaxed.h
Swetha Chikkaboraiah - kernel: cgroup: protecting css_set object
Srinivasarao P - Revert "kernel: cgroup: protect cgroup linked lists"
Hannes Frederic Sowa - random: check for increase of entropy_count because of signed conversion
Theodore Ts'o - random: fix nasty entropy accounting bug
Joe Perches - random: convert use of typedef ctl_table to struct ctl_table
Theodore Ts'o - random: fix BUG_ON caused by accounting simplification
Theodore Ts'o - random: use the architectural HWRNG for the SHA's IV in extract_buf()
Greg Price - random: entropy_bytes is actually bits
Greg Price - random: simplify accounting code
Greg Price - random: forget lock in lockless accounting
Greg Price - random: simplify accounting logic
Greg Price - random: simplify loop in random_read
Greg Price - random: fix description of get_random_bytes
Greg Price - random: fix comment on proc_do_uuid
Greg Price - random: fix typos / spelling errors in comments
Nick Kossifidis - random: Mix cputime from each thread that exits to the pool
Matt Wagantall - ARM: Improve vmalloc address checking in show_data()
Srinivasarao P - kernel: cgroup: protect cgroup linked lists
Pavankumar Kondeti - USB: msm_otg: Fix a bug in charger detection procedure
Sujeet Kumar - USB: msm_otg: Fix host mode suspend bug
Venkat Gopalakrishnan - mmc: msm_sdcc: Remove unnecessary delay in interrupt context
Li Zefan - cgroup: fix exit() vs rmdir() race
Stanislaw Gruszka - sched: fix divide by zero at {thread_group,task}_times
Eric Paris - SELinux: possible NULL deref in context_struct_to_string
Himangi Saraogi - SELinux: use ARRAY_SIZE
Lai Jiangshan - kthread_work: wake up worker only when the worker is idle
Tetsuo Handa - kthread: fix return value of kthread_create() upon SIGKILL.
Nishanth Aravamudan - kthread: ensure locality of task_struct allocations
Tetsuo Handa - kthread: make kthread_create() killable
Tom Herbert - net: Performance fix for process_backlog
Alok Chauhan - msm: msm_bus: Suspected fix for deadlock
Paul Reioux - Sound Control: add line gain to cached and register lock
Paul Reioux - Sound Control: fix copy and paste error for separate record lock
franciscofranco - sched: set sched_mc_power_savings to 2, which is the highest power saving possible value for this tunable. Basically according to http://elinux.org/images/1/1d/Comparing_Power_Saving_Techniques_For_Multicore_AR M_Platforms.pdf this tunable provides serious power saving improvements close to the power savings of hotpluging cores. Since in this Kernel we're using always a minimum of 2 cpus online at any time during screen off we might actually benefit from this because this feature packs tasks together and try to bind them to cpu0, which in theory will let cpu1 idle longer, thus improving battery life.
barome - net: wireless: bcmdhd: Disable OOB interrupt when WLAN is off
CallMeAldy - Linux 3.4.104
DOWNLOAD (http://hubdroid.com/~CallMeAldy/AK-Kernels/Mako/)
MementoMoriM
08/10/14, 15:37:57
AK.360.MAKO
DOWNLOAD (http://hubdroid.com/~CallMeAldy/AK-Kernels/Mako/)
Dejo link de la versión AOSP que el link está caído ...
https://mega.co.nz/#!E1A3EDqA!aap0w1JlkwLl1GibkJGje3bGzBSzXHAwW1AixWa u2I0
MementoMoriM
08/10/14, 20:22:37
MIRROR (https://s.basketbuild.com/devs/CallMeAldy/AK-Kernels/MAKO/)
OP UPDATED WITH THE NEW TEMPORARY LINK.
(https://s.basketbuild.com/devs/CallMeAldy/AK-Kernels/MAKO/)
slipknot30
21/11/14, 19:28:03
Hay un AK para 5.0 pero no lo encuentro desde el móvil si alguien quiere buscar con el PC .......
Hay un AK para 5.0 pero no lo encuentro desde el móvil si alguien quiere buscar con el PC .......
Se supone que esta en esta pagina pero el link de descarga no funciona ahora
https://plus.google.com/+AldrinHolmes/posts/dsEgjk8N9ar
Actualizacion del kernel
Changelog http://forum.xda-developers.com/showpost.php?p=57703619&postcount=9608
Descarga
CM https://s.basketbuild.com/filedl/devs?dev=CallMeAldy&dl=CallMeAldy/mako/AK-Kernels/AK.600.MAKO.CM.zip
AOSP https://s.basketbuild.com/filedl/devs?dev=CallMeAldy&dl=CallMeAldy/mako/AK-Kernels/AK.600.MAKO.zip
El usuario GorillaP tiene bastantes perfiles predefinidos para synapse de diversos kernels como este de AK por si quereis usarlos
http://forum.xda-developers.com/showpost.php?p=57705316&postcount=9610
En vista de los problemas que están teniendo con el actual proveedor de descargas, a partir de ahora subirán el kernel a AFH:
https://www.androidfilehost.com/?w=files&flid=23274
MementoMoriM
21/02/15, 03:11:57
Alguien ha probado AK con Lollipop?[emoji13]
slipknot30
21/02/15, 05:41:10
Alguien ha probado AK con Lollipop?[emoji13]
Yo no estuve buscando y no se si los que posteo marpe son para lolli
Yo no estuve buscando y no se si los que posteo marpe son para lolli
Yo no lo he probado,pero aparentemente es para LP:
http://forum.xda-developers.com/showpost.php?p=46249018&postcount=1
Mañana nueva versión y nueva apk: https://plus.google.com/100967273772434291975/posts/4jqpc9DzxbD
turkosanse
24/02/15, 18:02:44
Mañana nueva versión y nueva apk: https://plus.google.com/100967273772434291975/posts/4jqpc9DzxbD
No soy mucho de Inglés, más bien de Francés... Pero según leo, pone que será para AOSP... Para CM no?
No soy mucho de Inglés, más bien de Francés... Pero según leo, pone que será para AOSP... Para CM no?
En versiones anteriores había versión CM
MementoMoriM
24/02/15, 22:23:18
No soy mucho de Inglés, más bien de Francés... Pero según leo, pone que será para AOSP... Para CM no?
Hay versión CM y AOSP en la versión 600, que es la última que hay para nuestro dispositivo.
Actualizacion kernel para roms 5.1 por ahora para roms AOSP , despues sacara para CM , aun asi pongo el de CM por si alguno usais kernels CM
[5.1 - KERNEL R1 - STABLE]
A kernel based on CAF CM branch.
AOSP: AK.R1.MAKO (http://www.hubdroid.com/%7ECallMeAldy/AK-Kernel/AOSP/)
CM: AK.600.MAKO.CM (http://www.hubdroid.com/%7ECallMeAldy/AK-Kernel/CM/)
Changelog
https://plus.google.com/u/0/+AldrinHolmes20/posts/4rXPPtwKmnd
MementoMoriM
29/03/15, 15:45:59
Actualizacion kernel para roms 5.1 por ahora para roms AOSP , despues sacara para CM , aun asi pongo el de CM por si alguno usais kernels CM
[5.1 - KERNEL R1 - STABLE]
A kernel based on CAF CM branch.
AOSP: AK.R1.MAKO (http://www.hubdroid.com/%7ECallMeAldy/AK-Kernel/AOSP/)
CM: AK.600.MAKO.CM (http://www.hubdroid.com/%7ECallMeAldy/AK-Kernel/CM/)
Changelog
https://plus.google.com/u/0/+AldrinHolmes20/posts/4rXPPtwKmnd
A la espera del kernel para CM para echarle el guante [emoji1]
txuki2005
29/03/15, 15:56:23
mmmmmm no esta completo...es experimental... no lleva hotplug.... asin que me espero a la siguiente revision AOSP...
Gracias por informar.:ok:
concabeza
29/03/15, 15:58:35
Ando un poco perdido, pero cual es el último para 5.0? El 600? es el mismo que para 5.1?
PD: pido perdon, creo que el 600 es el último estable y el R1 es el primero para 5.1 no?
MementoMoriM
25/04/15, 10:24:29
[...]
JaTaKer
09/08/15, 03:12:48
Alguien que me pase la ultima versión de ak para 4.4.4 porfa no la encuentro ni aquí ni en xda..
ConvictedRocha
12/08/15, 07:31:42
Alguien que me pase la ultima versión de ak para 4.4.4 porfa no la encuentro ni aquí ni en xda..
Tal vez esté aquí http://hubdroid.com/~CallMeAldy/
Actualizacion del kernel de CallMeAldy a android M
Downloads
https://github.com/CallMeAldy/AK-Mako/releases
http://repo.codelax.me/AK-Kernel/
http://hubdroid.com/~CallMeAldy/AK-Kernel/ (http://hubdroid.com/%7ECallMeAldy/AK-Kernel/)
Actualización 26/10/15
http://forum.xda-developers.com/showpost.php?p=63497563&postcount=9997
vBulletin® v3.8.1, Copyright ©2000-2026, Jelsoft Enterprises Ltd.