¿Quien tenga brick puede probar esto? [Archivos]

STEVE_MARS

06/08/13, 07:35:10

Buenos dias.

Por favor, aquellos que tengan brick pero que la pantalla se ilumina al darle al power, que prueben a hacer esto que nuestro compañero cpro nos comenta:

quienes tengan brick, que renombren el archivo "utscript" a "utscript.bck" y el archivo "utscript_1st" a "utscript". Después, que realicen el proceso habitual.

Os adelanto que no funciona con los tablets que la pantalla no enciende.
Saludos,

STEVE_MARS

06/08/13, 12:55:12

Sistema teoricamente comprobado por un forero de 4pda.ru:

I was able to revive the full brick!

done here as Hyundai T7 / Hyundai T7s - Talk (Post # 23798664)

4 gigs took the card, extract it from firmware bootloader_sd.vhd using WinImage 8.50.zip.
formatnul her partition using Acronis Disk Director 11 Home in fat32 and copied the firmware Inspiration_0.4

started to believe and through - the ox. black screen blinked a couple of times. after 5 - 10 minutes just pressed to believe and earned a tablet.

everything works ... : D

¡¡¡¡¡¡ Necesito betatester con la tablet brickeada, compañeros ¡¡¡¡¡¡¡

cidacos

06/08/13, 13:00:58

Joder, lastima,,,, yo la envie de vuelta a china esta mañana mismo... a ver si hay algun compañero que pueda... seria interesante

PhoenixTR

06/08/13, 14:29:12

Ya también la mande de vuelta ya. De todas maneras la mia era de las que no se iluminaba ni la pantalla.

DigiMagic

06/08/13, 21:35:39

beachsun

06/08/13, 21:38:19

Hi Digimagic, can you try this? :

- One 4 Gb. SD, using bootloader_sd.vhd from Inspiration 0.4 with Winimage, select "Restore virtual hard disk image on physical drive ..." and mark yes to write information.
- If after that Windows don´t read SD, go to "administracion de discos", (sorry, I don´t know how is in english) or use with Acronis Disk Director 11 and format the rest of de SD, above 2.8 Gb., in FAT32, and copy all files of Inspiration 0.4 (13 files)
- Insert SD on tablet, and press vol- and power, and punch reset. Continue press vol- and power till words of updated appears on screen (I hope so).
- Wait till updated finished and power on tablet.

It´s only a test, please do it only if your Voyo it´s bricked.

cpro

06/08/13, 21:43:54

Not exactly what was asked for in the first post, but I have a bricked tablet and I'm willing to do the tests. Mine is completely bricked though, the screen stays completely black and other than charging LED, the tablet shows no signs of life.

Hi, if you have followed the other threads... surely you know we have tow main theories:
1.- Tablet do no turn on because buttons do not contact switches: open it to be sure this is not its trouble.
2.- Tablet do turn on but it only gets black screen: it turns on but do nothing; try to change name from utscrit_1st to utscript and flash it again. Before copy the firmware files, format SD as FAT32, not quick format.

Good luck.
PS: pls, tell us about your progress

Edit.: hey, I realize now you were the first one to open it, did not returned it to China or is it a new one?
Edit 2: of course, beachsun's post too; it is the russian suggested method

DigiMagic

06/08/13, 22:30:30

Did not return it to China - because I'm lazy :-) and I've hoped either someone would find a solution or I'll reuse parts of the tablet for some sort of do-it-yourself display/computer. In the meantime I've ordered Nextway F9X (didn't arrive yet, was about 180$ shipping included).

All of the buttons seem to work correctly.

beachsun, I think I understand the instructions, but I have only a 32 GB card. Should it work? Or would you recommend that I get a 4GB card? (It's no problem to buy it, I'm asking just to ensure best chances of success.)

beachsun

06/08/13, 22:41:07

It should be the same, but apparently using small mSD give more chances of a successfull upgrade.

But as your tablet is already bricked, i think it cannot hurt to try the 32gb card...

Manzano90

06/08/13, 23:45:35

cpro

06/08/13, 23:52:24

Stevee, que he conseguidooo que funcioneeeeee!!! Madre mia..no me lo creoo!!!! YA tengo la tablet otra vez!!! Muchas gracias de verdad..y todo el que necesite ayuda que cuente conmigo!!! No puedo poner nada mas por ke estoy ocupado, ya os contaree

Enhorabuena :campeon: Impacientes estamos de que nos cuentes en qué estado estaba y qué has hecho. :ok:

cpro

06/08/13, 23:55:05

beachsun, I think I understand the instructions, but I have only a 32 GB card. Should it work? Or would you recommend that I get a 4GB card? (It's no problem to buy it, I'm asking just to ensure best chances of success.)

If you copy the image "as is" on the SD card it will look as a 4GB card. After it, I am not sure how Windows will recognize and format it.

Hozze

07/08/13, 00:07:54

Enhorabuena Manzano90, :campeon: muchas felicidades. Estos tíos son unos "Mostruos" (como diriamos en mi pueblo). Mi tablet salió esta mañana para China :cry: (La impaciencia nunca es buena concejera)

Enhorabuena equipo, sois los mejores, cuando regrese mi tablet estaré tranquilo de que estará libre de Brickeos en el futuro, sois grandes.

cpro

07/08/13, 00:09:57

All of the buttons seem to work correctly.

A candid question. Have you tried to disconnect and reconnect the battery?

STEVE_MARS

07/08/13, 00:45:57

Stevee, que he conseguidooo que funcioneeeeee!!! Madre mia..no me lo creoo!!!! YA tengo la tablet otra vez!!! Muchas gracias de verdad..y todo el que necesite ayuda que cuente conmigo!!! No puedo poner nada mas por ke estoy ocupado, ya os contaree

JODERRRRRRR, ME HAS DADO LA MAYOR ALEGRIA DE LA SEMANAAAAA (perdon por los gritos, pero es que el entusiasmo me puede X-DX-DX-D)

Mañana nos cuentas como ha sido, como lo has hecho, para preparar un supertutorial y ayudar al resto de los compañeros.

Y aprovecho para dar las gracias a todo el Voyo´s team, como los voy a llamar a partir de ahora :grin::
cpro, teredur, beachsun y jolotroco, que nos ha dado las claves de todo el trabajo que hemos estado haciendo durante la semana. :gracias:

cpro

07/08/13, 11:44:12

Not exactly what was asked for in the first post, but I have a bricked tablet and I'm willing to do the tests. Mine is completely bricked though, the screen stays completely black and other than charging LED, the tablet shows no signs of life.

If you still have not applied manzano's method http://www.htcmania.com/showpost.php?p=9746427&postcount=1 , please, could you try it (at first) without using the RESET button?

Thanks in advance

beachsun

07/08/13, 12:20:28

Enhorabuena Manzano90!!!

DigiMagic

07/08/13, 22:03:08

If you still have not applied manzano's method http://www.htcmania.com/showpost.php?p=9746427&postcount=1 , please, could you try it (at first) without using the RESET button?

Thanks in advance

I confirm manzano's method works. Thanks everyone for all the effort. :dios: It worked without pressing the reset button.

The one problem I've encountered so far, I don't know if it's related to updated software or not, the battery is supposedly 100% full - yet the tablet turns off immediately when I disconnect charging cable. It won't turn back on without charging cable. If I plug the cable out then in, charging LED is shortly red then after about a second becomes and stays green. I'll leave it to charge overnight and check tomorrow morning...

Edit: forgot to say, 32 GB card (Kingston, class 10) worked without any issues. Windows now thinks it has the capacity of about 3 GB, so it needs to be reformatted again for regular use.

beachsun

07/08/13, 22:06:49

Thank You Very Much!!!
This :
It worked without pressing the reset button.
is a very valuable information!!!

Hope you'll find a solution to your battery problem...

Osea, parece que la tablet arranca de la mSD y si no encuentra el "Boot" arranca de Flash...
Si es así, es un buen sistema, es casi imposible de Brickear sin poderla recuperar...

STEVE_MARS

07/08/13, 23:18:49

Y además con cualquier microsd, de cualquier tamaño. Digimagic lo ha hecho con una de 32 gb. Clase 10.

cpro

08/08/13, 00:12:30

Edit: forgot to say, 32 GB card (Kingston, class 10) worked without any issues. Windows now thinks it has the capacity of about 3 GB, so it needs to be reformatted again for regular use.

It is all right. Thanks a lot.

Open Windows MMC "Disk Management" and erase all basic partitions (there are four - 4). After it, you will be able to format it as a 32GB card. You can reach it from many places: right click on "Start->System"->Administration

DigiMagic

08/08/13, 12:44:36

After charging the tablet entire night, this morning again it behaves basically as if it doesn't have a battery at all. It shuts down immediately when I disconnect the charger. I am confused... I'll disassemble it at evening and check battery wires and voltage...

beachsun

08/08/13, 13:44:18

:( bad luck... I'm sorry but i dont think i can help in any way...
It seems hardware related.

DigiMagic

09/08/13, 21:08:11

Solved, now I have a fully functioning tablet. :-) It seems the repair guy to whom I've brought the tablet earlier to try to fix it, disconnected both battery wires in a futile attempt to reset system settings or something, but "forgot" to tell me about that. At least he didn't charge me anything.

It's interesting that battery electronics seems to be extremely stupid - with wires totally disconnected, tablet was reporting that battery was 100% charged.